Martindale Electric Metrohm MET7A501C Safety Insulation Tester - Martindale Electric Metrohm Flash...
1
7A501C safety insulation tester The 7A501 has been approved to BS1259 (1958) and carries the Ministry of Power Certificate Number IS1428 (Class 1)and the Factory Inspectorate Certificate Number 2148 (Class 2A and 2C) which covers Methane, Ammonia and Hydrocarbons. The testers have an analogue display and 500V DC insulation test voltage with a short circuit current of less than 2mA. On continuity the test voltage is nominally 200mV with a short circuit current of 26mA maximum. A special allen key is required to access the batteries so that they may not be changed in a hazardous area. This tester does not comply with The ATEX94 directive. NOTE: BS1259 is now obsolescent and has been superseded by BS5501. Under BS1259 the tester by itself was approved whereas under BS5501 approvals also consider applications of the tester. SPECIFICATIONS ELECTRICAL INSULATION MΩ Range: 0 - 50M. Test Voltage: 500V DC±10% across 1MΩ Short Circuit Current: <2mA Accuracy: ±1.6mm of scale arc length CONTINUITY Ω Range: 0 - 50. Test Voltage: Nominal 200mV Short Circuit Current: <26mA Accuracy: ±1.6mm of scale arc length Battery: 6 off 1.5V AA IEC R6B MECHANICAL Size: 132 X 82 X 60mm Material: ABS Weight: 0.6kg Movement: Nominal 1.5mA sensitivity - taut band Scale Length: 70mm Test Leads: 1m long with crocodile clips ENVIRONMENTAL Operating Temperature: 0 to 40°C Storage Temperature: -20°C to 60°C Due to policy of continuous development, Martindale Electric reserves the right to alter equipment specification and description outlined in this document without prior notice. No part of this document shall be deemed to be part of any contract for the equipment unless specifically referred to as an inclusion within such contract. © Martindale Electric Co. Ltd. 2005 Martindale Electric Company Ltd. Metrohm House, Penfold Trading Estate, Imperial Way, Watford, WD24 4YY. Tel: 01923 441717 Fax: 01923 446900 E-mail: [email protected] Web site: http://www.martindale-electric.co.uk rev2
-
Upload
thorne-derrick-international -
Category
Documents
-
view
857 -
download
4
Transcript of Martindale Electric Metrohm MET7A501C Safety Insulation Tester - Martindale Electric Metrohm Flash...
7A501C safetyinsulation tester
The 7A501 has been approved to BS1259 (1958) andcarries the Ministry of Power Certificate Number IS1428(Class 1)and the Factory Inspectorate Certificate Number2148 (Class 2A and 2C) which covers Methane, Ammoniaand Hydrocarbons.
The testers have an analogue display and 500V DCinsulation test voltage with a short circuit current of lessthan 2mA. On continuity the test voltage is nominally200mV with a short circuit current of 26mA maximum. Aspecial allen key is required to access the batteries sothat they may not be changed in a hazardous area.
This tester does not comply with The ATEX94 directive.
NOTE: BS1259 is now obsolescent and has beensuperseded by BS5501. Under BS1259 the tester by itselfwas approved whereas under BS5501 approvals alsoconsider applications of the tester.
SPECIFICATIONS
ELECTRICAL
INSULATION M!Range: 0 - 50M.Test Voltage: 500V DC±10% across 1M!Short Circuit Current: <2mAAccuracy: ±1.6mm of scale arc length
CONTINUITY !
Range: 0 - 50.Test Voltage: Nominal 200mVShort Circuit Current: <26mAAccuracy: ±1.6mm of scale arc lengthBattery: 6 off 1.5V AA IEC R6B
MECHANICAL
Size: 132 X 82 X 60mmMaterial: ABSWeight: 0.6kgMovement: Nominal 1.5mA sensitivity - taut bandScale Length: 70mmTest Leads: 1m long with crocodile clips
ENVIRONMENTAL
Operating Temperature: 0 to 40°CStorage Temperature: -20°C to 60°C
Due to policy of continuous development, Martindale Electric reserves the right to alter equipment specification and description outlined in this document without prior notice. No part ofthis document shall be deemed to be part of any contract for the equipment unless specifically referred to as an inclusion within such contract. © Martindale Electric Co. Ltd. 2005
Martindale Electric Company Ltd. Metrohm House, Penfold Trading Estate, Imperial Way, Watford, WD24 4YY. Tel: 01923 441717 Fax: 01923 446900
E-mail: [email protected] Web site: http://www.martindale-electric.co.uk rev2
Pamela Kinnell
