Marketing Information of Anmol Technical Training Centre
-
Upload
delhianmol -
Category
Documents
-
view
217 -
download
0
Transcript of Marketing Information of Anmol Technical Training Centre
-
7/28/2019 Marketing Information of Anmol Technical Training Centre
1/7
WEB SITE: www.anmoltechnicaltraining.com
Contact: [email protected]
Branch Location: New Delhi; Contact :+(91) 9718477956 / 8130339533
Head Office: Navi Mumbai ; Contact: +(91)-7208739891;9718477956;9930916273;8130339533
Anmol Technical Training Centre is one of the reputed In-plant Industrial Training Centre( covering Industry
Automation) in Navi Mumbai and Delhi-NCR for developing skilled manpower for the Industries like Refineries,Chemicals, Petrochemicals, Fertilizers and Pharmaceuticals etc.
Anmol Technical Training Centre was incorporated in year 2000.
We have joint venture with IMPULSE OFFSHORE which is basically an Engineering, Procurement & Constructioncompany in the field of Oil & Gas Refineries, Petrochemical, Fertilizers, Pharmaceuticals, Offshore Process & wellPlatforms involving details Engineering, Procurements, Annual Maintenance contract, Erection & commissioning ofvarious disciplines like Instrumentation and Electrical.
There are well equipped workshops with sophisticated tools, equipment& machinery, Internet connectivity andlaboratories for implementing training under different schemes.
-
7/28/2019 Marketing Information of Anmol Technical Training Centre
2/7
TRAINING DETAILS
Sr.No
Description Duration Qualification
1 Training For PLC & SCADA 02 Month B.E/ B. TECH2 Training For Instrument Engineer 03 Month B.E/ B. TECH
3 Training For Instrument Technician 03 Month DIPLOMA/ ITI4 Training For Instrument Electrician 02 Month 8 PASS/ FAIL5 Training For Tube & Cable Tray Fitter 03 Month 8 PASS/ FAIL
6 Training For Pipe Fitter 01 Month 8 PASS/ FAIL7 Training For General Fitter 01 Month 8 PASS/ FAIL
8 Training For Scaffolder 15 days NOT NECESSARY
9 Training For Rigger 01 Month NOT NECESSARY
10 Summer/Winter Trainings 03-06 Weeks Any time duringB.E/B.TECH
11 Final Year Industrial Training 6 Months 3r/4 Year
B.E/B.TECH
Note: SPECIAL RATES WILL BE GIVEN FOR BATCH OF 10 CANDIDATES.
Why Us- 10 Points
1. Modern Infrastructure with well-equipped labs for PLC , SCADA , Electrical and other trainings.2. In house mini plant for unlimited practical and hands-on experience and Live Project.3. Flexi-timings: Daily and Week-end classes.4. Guest lectures by Industrial Experts.5. 100% Placement Assistance.6. Personality Development & Interview Skills.
7. Opportunity to appear in Placement Drives of reputed MNCs.8. Separate Certificate for Project work on company letter head, after completion of Project.9. Free Membership for one year to participate in placements drives and to revise the course at no extra cost.10. Certificate of Honor to the best trainee in each Batch.
PLC, DCS and SCADA Training
This Training Course introduces trainees with little or no background to PLC, SCADA &
DCS Systems. Trainee will learn general & theoretical information about these systems.
This course covers the how's & why of PLC, SCADA & DCS Systems that the reference
materials & vendor sponsored courses usually do not cover. This training course is also
designed to provide a solid conceptual knowledge base for future learning. Programmable
Logic Controllers is a heart of modern automation systems. The application ranges from
small CNC machines to large process plants.
PLC Training Course Contents:
-
7/28/2019 Marketing Information of Anmol Technical Training Centre
3/7
Introduction to PLC hardware
Architectural Evolution of PLC
Introduction to the field devices attached to PLC
PLC Fundamentals-(Block Diagram of PLC's)
Role of PLC in automation
Detail information about PLC components
Power supply
CPU
I/O modules
Communication bus
Various ranges available in PLCs
Types of input & outputs
Source Sink Concept in PLC
Concept of flags
Scan cycle execution
Introduction to PLC programming software
Addressing concepts Introduction to bit, byte & word concept
Upload, download, monitoring of programs
Forcing I/P & O/P
Monitoring/Modifying data table values
Standard procedure to be followed in wiring/wiring ladder etc
Hands on experience on writing programs
Case studies for conveyor, motors control, timer & counter applications etc
Troubleshooting & fault diagnostics of PLC
Documenting the project
Program assignments for real time applications
DCS Training Course Content:
Introduction of DCS
Overview for DCS
Control panel DPU (Distributed Processor Unit)
DPU hardware & power supply
I/O cards in DPU panel
Data highway controller
Control loops & digital logic
Operator/Engineer station overview
Alarm list & history
Displaying loops & logic force value
Download from engineer station to DPU & operator station
Inspection & maintenance for distributed control system (DCS)
Troubleshooting of the control system
Introduction to control system
Application of DCS System
Architectural evolution for DCS
Comparison between the hardware PLC & DCS
-
7/28/2019 Marketing Information of Anmol Technical Training Centre
4/7
Instrument Engineering Training
With vast industry experience, we are engaged in offeringTraining service for
Instrument Engineering. The areas we cover in these service are study of P&ID,
instrument index, instrument specification, loop wiring diagrams, panel diagrams &drawing, plot plan, instrument specification, check list preparations, impulse line testing,
bill of materials & hook up drawing.
Course Contents:
Introduction to SHE while working in industrial safety awareness
Introduction to operation, programming & trouble shooting of PLC ,DCS &
SCADA
Introduction & calibration of various types of field instruments, selection are their preventive maintenance,
breakdown maintenance
Introduction to various types of panel instrument calibration, termination, loop checking, commissioning
procedure & online trouble shooting, online PID values function
Industrial visit & online training
Training on project report preparation, project detail engineering & execution
Instrumentation & control engineering (onshore & offshore)
General engineering instrumentation & control
Fundamentals of instrumentation, measurement & process control engineering
General instrumentation standards & best practice in process, electrical & instrumentation Drawing &
Documentation
Process instrumentation
Calibration, installation & maintenance of instruments
Process control basics & control valves sizing, selection & maintenance (incl. Pressure Relief Valves).
Programmable logic controller
SCADA Systems & Distributed Control Systems Industrial Data Communications (including field bus & Industrial Ethernet)
Safety instrumentation & Emergency Shutdown Systems
Understand the concept of an instrumentation system to support accurate measurements
Understand the concepts accuracy & precision
Build, program, calibrate & use a microprocessor-based instrumentation system
Be able to analyze & design an instrumentation system, dealing with the concepts of dynamic range, signal
noise
Ratio & error budget
Control noise, intrinsic or external (interference)
Read an operational amplifier spec sheet & use the specification to construct an error budget for a high-gain
amplifier Understand the operation of various instrumentation transducers
Select & apply A/D conversion techniques such as successive-approximation, dual slope conversion, voltage
frequency conversion
Understand on a theoretical level carrier signal & signal averaging methods for extracting a signal from noise
-
7/28/2019 Marketing Information of Anmol Technical Training Centre
5/7
Instrument Technicians Training
We provide Training in Instrument Technicians.
Course Contents:
Introduction to Principles of Measurement of Level, Pressure, Flow and Temperature
Calibration and testing of Pneumatic and Electronic Process Instruments like
Transmitters, Gauges, RTD, Thermocouples, I/P convertors, Control Valves, ON-OFF
Valves, Shutdown Valves switches, flow meters etc
Installation of Various Process Instruments
Introduction to Impulse tube fittings and tubing
Introduction to Principles of Controller Modes
Principles of Feedback, Cascade, and Ratio Controllers
Introduction of various types of Control Valves and their bodies part
Selection, servicing and installation of control valves and accessories Introduction to Process Loop Wiring Diagrams, Piping and Instrument Drawings (P&IDs)
Introduction to HART Communicator
Configuration of various types of Process Instruments using HART Communicator
Introduction to PLC and DCS
Fault Finding and Trouble Shooting
Maintenance, Breakdown Maintenance, Preparation of Calibration set up, Online testing Procedure, Trouble
shooting of control panels & functions, Procedure of ISO calibration methods, Overhauling of all type of
instruments
Introduction to Various Types of Panel Instrument Calibration, Termination, loop checking, Commissioning
procedure & online trouble shooting, Online PID values function
Industrial visit & online training
Training project report preparation
Project detail engineering and Execution
Principles of measurement of level, pressure, flow, and temperature
Calibration of pneumatic recorders, transmitters, pressure gauges and flow meters
Installation of thermocouples and RTDs for temperature measurement
Fabrication and installation of tubing and fittings
Application of laws of basic electrical theory
Analysis of series and parallel circuits
Measurement of AC and DC circuit parameters, resistance and inductance
Instrument Control
Principles of controller modes
Principles of feedback, cascade, and ratio control Calibration of pneumatic and electronic controllers
Applications of various control valve bodies
Selection of control valve flow characteristics
Selection, servicing and installation of control valves and accessories
Discussion of control valve problems, flashing, cavitation, noise
Methods to eliminate or minimize control valve problems
Study of control strategies including feed forward control, selective, override and multivariable control
Controller tuning using simulation software to implement various tuning methods
-
7/28/2019 Marketing Information of Anmol Technical Training Centre
6/7
Alignment, calibration and circuit analysis of electronic analog controllers
Principles of digital controllers, smart transmitters and smart control valves
Construction of electrical process loop wiring diagrams and piping and instrument drawings (P&IDs)
Per ISA (Instrumentation Systems Automation) standards
Configuring of capacitance, thermal and resistive level transmitters
Configuring of density transmitters
Configuring of temperature transmitters
Configuring a HART (Highway Addressable Transducer) Vortex flow meter
Configure a mass flow meter
Configuring of magnetic flow transmitters
Configuring of ultrasonic & flow transmitters
Instrument Electrician Training
With the continuous support of our personnel, we are able to offer Training Services for
Instrument Electricians.Our training services include study of basic electrical theory, cable
installation testing, cable laying & dressing, cable glanding, termination of end cable leads to
field instruments and junction boxes & control panels.
Course Contents:
Industrial safety awareness
Introduction and use of tools
Introduction to instrument consumable like cable glands, lugs and cable ties
Introduction to process instruments and their applications
Introduction to various types of field instrument, panel instrument & accessories, termination, continuity
testing, loop checking and commissioning assistance
Industrial visit & online project training
Instrument Tube & Cable Tray Fitter Training
With vast industry experience, we are indulged in providing Training services for Instrument
Tube & Cable Tray Fitters. The areas, we cover under this training includes introduction to
hook up drawing, bill of material, impulse tubing (1/4", 3/8"&1/2' OD), tube fitting isolation
hydraulic checking and pneumatic testing. Further, we provide training for gas cutting,
drilling and fixing of various instrument and tray supports.
Course Contents:
Industrial safety awareness
Industrial visit & online project training
Study for fabrication & erection of cable trays & instrument supports
Language course (Hindi & English)
-
7/28/2019 Marketing Information of Anmol Technical Training Centre
7/7
Study of various types of field instruments, panel instruments & accessories .installation/erection, making
support for instruments & panels, & commissioning assistance
Scaffolders Training
We are engaged in conducting training sessions for Scaffolders Training. For this, we
have hired qualified faculty members, who possess vast experience in the domain.
They provide the clients with theory knowledge and introduction to tools and
material, safety material introduction preparation of scaffolding of different shapes,
sizes and tests. These services are available to the clients at affordable prices.
Riggers Training
Our services include providing conducting training sessionsfor Riggers Training.
Through these services, we give practical and theoretical knowledge to them. The areas
of concern that are given consideration in training sessions are introduction to tools andsafety material, rigging belts, cellining rope signals to crane and test. With these training
services, we help them to be more competitive and efficient in their respective fields.