Markar 2015 Canadian Price List - Locks Access Control ... Books/2015 Price Books... · Markar 2015...

Markar 2015 Canadian Price List

© 2012-2015 Pemko Manufacturing Co.

Prices Effective June 8th, 2015

2Prices Effective June 8th, 2015

Copyright © 2012-2015, Pemko Manufacturing Co., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

Terms and Conditions .........................................................................................................................................................................................3-7Hinge Finishes ..........................................................................................................................................................................................................8-9Hinge Numbering System and Standard Lengths ............................................................................................................................. 10-11Continuous Hinge Modifications ...................................................................................................................................................................... 12Continuous Hinge and Edge Guard Modifications .................................................................................................................................. 133500 Series Stainless Steel Pin and Barrel Security Hinges ....................................................................................................................... 14300 Series Stainless Steel Pin and Barrel Hinges ................................................................................................................................... 15-19200 Series Carbon Steel Pin and Barrel Hinges ....................................................................................................................................... 20100 Series Aluminum Pin and Barrel Continuous Hinges .................................................................................................................. 21-22Toilet Partition Hinges .......................................................................................................................................................................................... 23Continuous Hinge Shims ..................................................................................................................................................................................... 24Pivot Reinforcing Hinges ...................................................................................................................................................................................... 25Surface Hinge Leaf Parts ..................................................................................................................................................................................... 25 Tools and Accessories ........................................................................................................................................................................................... 26Screw Pack Pricing .................................................................................................................................................................................................. 27Fastener Pricing ................................................................................................................................................................................................. 28-29Flat Astragals ............................................................................................................................................................................................................... 30Edge Guards Order Form ................................................................................................................................................................................... 31Current Transfer Prep Information Form ..................................................................................................................................................... 32


3Copyright © 2012-2015, Pemko Manufacturing Co., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

ASSA ABLOY Door Security Solutions Canada, a division of assa abloy canada ltd. And all of its current and future associated companies, subsidiaries and operating brands reserve the right to decline an order, in whole or in part, when the type or quantity of goods or credit worthiness of the purchaser is not satisfactory to us in our sole and absolute discretion.

The terms and conditions contained herein constitute the entire agreement between the parties.

Purchase orders, quotations (“quote”) requests, acknowledgements or the like issued by the purchaser that have contrary standard terms and conditions are not binding on ASSA ABLOY Door Security Solutions Canada, unless such terms and conditions are approved in a separate written agreement by ASSA ABLOY Door Security Solutions Canada’s authorized representatives. In the event of an acceptance of purchaser’s purchase order by ASSA ABLOY Door Security Solutions Canada, the purchaser agrees that such acceptance is solely conditioned on purchaser’s acceptance of the terms and conditions set forth in this instrument, regardless of the terms and conditions specified in the purchaser’s purchase order. The terms and conditions in purchaser’s purchase order which conflict with terms and conditions of this instrument shall be disregarded and are hereby rejected, and this instrument shall constitute the entire agreement between ASSA ABLOY Door Security Solutions Canada and the purchaser. In the event that ASSA ABLOY Door Security Solutions Canada does not enforce or require strict performance of any term or condition hereof, or of any other document, instrument or other agreement relating to goods sold, such lack of enforcement or requirement of strict performance will not waive, affect or diminish any right of ASSA ABLOY Door Security Solutions Canada to enforce or require strict performance of such term or condition in the future.

Prices: All prices are subject to change without notice and are not guaranteed. All shipments will be made at prices in effect at the time of order acceptance. Possession of price lists does not constitute an agreement to sell. Acknowledgements, invoices and quotations are on an “Errors and Omissions Excepted” basis (commonly referred to as E.O.E.).

We reserve the right to correct clerical, stenographic and other obvious errors at any time.

Terms: 1% tenth of the month following, net thirty (30) days after statement date. It is understood that ASSA ABLOY Door Security Solutions Canada may impose and charge a finance charge of 2% per month or the highest rate allowed by law on any amount which becomes past due and delinquent. Additionally, the Customer shall be responsible for all collection costs, court costs and reasonable attorney’s fees in connection with the recovery of any delinquent amount.

Minimum Invoice: Minimum invoice for complete product is $250.00 net product value. The minimum invoice for parts orders is $100.00 net product value. Any orders not totaling these minimums will be invoiced at the minimums. This policy does not include the following: Cut (bitted) Keys of any type, Master Keyed Cylinders, Master Keyed Padlocks and Factory Generated Bitting Lists. Same day order expedites will be invoiced at book less 50%.

Quotations: If ASSA ABLOY Door Security Solutions Canada elects to offer a Quote, such Quote will be valid for ninety (90) days. Complete shipment of the order must be accepted by Purchaser within nine (9) calendar months from the date of issuance.

ASSA ABLOY CANADA TERMS AND CONDTIONS

wa

rr

an

ties



The Quote number and project name must be referenced on the order. Any invoiced order that has the incorrect discount applied to it and did not have a Quote copy attached to the order or the Quote number written on the order will have a service fee of $75.00 net DEDUCTED from any sales credit issued for the difference in discount.

Changes to original quote will be accepted up to thirty (30) days from the date of the original quote. All changes must reference the original quote number.

The Quote is null and void if the Purchase Order does not include ALL product lines listed on the Quote or if the quantities for an item covered by the Quote deviate by 10% or more. The Purchaser will have to solicit a new quotation.

With the issuance and acceptance of a Quote for the purchase of products, the Purchaser agrees that products so purchased will not be resold or transferred to any Distributor not authorized by ASSA ABLOY Door Security Solutions Canada to sell its products. This would be inclusive of branches of the quoted Distributor. Failure to abide by this restriction may result in the Distributor’s ineligibility for Quotes, or other actions in ASSA ABLOY Door Security Solutions Canada’s discretion.

ASSA ABLOY Door Security Solutions Canada and its sales representatives reserve the right, in their sole discretion and for any reason, to refuse a Distributor’s request to quote a price other than ASSA ABLOY Door Security Solutions Canada’s standard list price and regardless of whether ASSA ABLOY Door Security Solutions Canada or its sales representatives have previously quoted discounted prices to the Distributor on some or all of its orders.

Special Orders: Products not cataloged or listed in this price book will be considered as special products, and will not be manufactured without prior approval from ASSA ABLOY Door Security Solutions Canada.

A minimum special handling charge of $50.00 will be added for non cataloged product. Any additional labour or material required will be charged accordingly. Special products require special handling, and therefore standard lead times may not apply. Please consult with your Sales Representative for further details.

High Security Orders: To ensure proper control of End User restricted Products, ASSA ABLOY Door Security Solutions Canada requires that the End User complete a Delivery of Controlled component form indicating to whom the product will be shipped to upon leaving the factory or the distribution centre.

All orders must be accompanied with a current copy of the Authorization form and must be signed by the proper authorized personnel whose name(s) is on file with ASSA ABLOY Door Security Solutions Canada.

High Security products are defined as high security key blanks, cut keys, sidebars, sub assemblies, complete and master-keyed cylinders, and key charts.

ASSA ABLOY Door Security Solutions Canada reserves the right to request authorization from the end user if necessary before the order is processed.


ter

ms

an

d c

on

dit

ion

s



Changes / Cancellation Changes or cancellations to a non stock order that has been released to production will be subject to a charge of costs for material and labour expenses that have been incurred prior to notification from Customer. Handling charges are billed on Customer’s original order.

All change requests for Mercury or Turbo goods must be submitted in writing to Customer Service within two (2) business days of receipt of acknowledgement of the order. In those instances where a cancellation is accepted, ASSA ABLOY Door Security Solutions Canada reserves the right to make a reasonable cancellation charge based on expenses incurred.

Packaging: Many items are defined as to Case Lot Packaging or Minimum Order. The case lot policy does not apply to hardware to be used on a specific hardware project.

Delivery: Orders will be acknowledged and given a scheduled delivery date based on estimated manufacturing lead times. Complete information is required to process all orders. Orders with insufficient information for processing

(i.e. keying information, door sizes, etc.) may be subject to extended lead times which are relative to the time required in obtaining the necessary information for order processing. Manufacturing lead time will begin once all information is received to process an order. ASSA ABLOY Door Security Solutions Canada will use reasonable efforts to deliver products as estimated, but makes no guarantee as to delivery dates.

ASSA ABLOY Door Security Solutions Canada will not be liable for back charges incurred based on availability of product or as a result of delays in delivery caused by insufficient information required to process an order.

ASSA ABLOY Door Security Solutions Canada will not be held responsible for delays in delivery caused by strikes, fires, floods or any other causes beyond our control, including the delivery of material to us. Under no circumstances shall ASSA ABLOY Door Security Solutions Canada be liable or accountable for consequential damages due to failure of delivery. Unless your order specifies otherwise, partial shipments will be made on or after the scheduled delivery date.

Terms of Shipment: All products are shipped FOB the factory or the distribution centre unless otherwise agreed to in writing from ASSA ABLOY Door Security Solutions Canada. Title to and risk of loss product shipped is the responsibility of the purchaser and delivery is deemed to be complete upon transfer of the product to a common carrier. Carriers carry limited insurance. If the customer requires additional insurance coverage please contact our customer service department.

All claims for shortages and damage are the responsibility of the purchaser. ASSA ABLOY Door Security Solutions Canada will assist the Purchaser with documentation necessary to make a claim if requested to do so by the purchaser.

ASSA ABLOY Door Security Solutions Canada will ship via the best possible carrier. Shipments at the customer’s request will be prepaid and any up-charge (actual cost less


of Orders:

ter

ms a

nd

co

nd

itio

ns



the amount negotiated by ASSA ABLOY Door Security Solutions Canada) will be added to the invoice.

Claims: In the event of ASSA ABLOY Door Security Solutions Canada or Customer error, claims for shortages, pricing errors and/or incorrectly filled orders must be submitted in writing to Customer Service within thirty (30) days from receipt of material. Any claims for shortages or damage by the Carrier must be made by the Customer directly to the Carrier.

Limited Carrier insurance is typically offered for all orders. If the Customer requires additional insurance, please contact a ASSA ABLOY Door Security Solutions Canada Customer Service Representative upon submittal of the order. ASSA ABLOY Door Security Solutions Canada will obtain requested insurance and the additional cost will be included on Customer’s invoice.

Invoice Deduction: An ASSA ABLOY Door Security Solutions Canada Sales Representative or Customer Service Representative must be notified of any disputed invoices within thirty (30) days from the date of invoice. Deductions should only be taken for the disputed amount and the balance of the invoice is due and payable within standard payment terms.

Returned Goods: No Material is to be returned to our facilities without prior written approval from customer service. It is the policy of ASSA ABLOY Door Security Solutions Canada to not accept returns of any materials that are correctly furnished as per the Distributor’s Purchase Order.

Mercury and Turbo material may be returned with approval, if ASSA ABLOY Door Security Solutions Canada believes the product is resalable. All such product must be returned in its original unmarked carton. The goods must have been shipped and invoiced in the previous sixty (60) days. Returns will be at the distributor’s expense. The goods returned will be subject to inspection and a minimum 20% restocking fee will be applied to compensate for the cost of inspection, repacking and handling.

Return of product due to customer order error or accommodation must be prearranged with ASSA ABLOY Door Security Solutions Canada and approved in writing by Sales Management. A minimal restocking fee of 50% will be charged. Upon receipt and verification by ASSA ABLOY Door Security Solutions Canada that the returned merchandise is in saleable condition and that the material can be returned to the original manufacturer.

Defective goods that are out of warranty period will not be accepted for return. Products that are master-keyed, special orders, key bitted will not be accepted under any circumstances, unless the product is determined to be defective.

Procedure: Ensure the RGA labels that are sent to Purchaser by ASSA ABLOY Door Security Solutions Canada are visible on return goods shipment. Ensure that the RGA number appears on the return shipment label and is legible.

Return the authorized merchandise within sixty(60) days from the date of RGA issuance. Return shipments must be freight prepaid to the distribution centre (at time some


latc

hes

, ha

nd

les

an

d s

tr

ikes



directions may apply to return the goods to the original manufacturer) ASSA ABLOY Door Security Solutions Canada is not liable for damages to product during shipping.

No credit may be taken or issued prior to RGA approval and receipt of product. All defective goods within the terms of our limited warranty may be returned for repair or replacement only.

Taxes: Prices do not include any present or future Federal, Province, or Local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments, which may result from transactions or any services performed in connection herewith.

Governing Law: The rights and obligations of the parties shall be governed by the laws of the Province of Ontario, excluding any conflicts of law provisions. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this.

Indemnity: Purchaser shall indemnify ASSA ABLOY Door Security Solutions Canada and hold ASSA ABLOY Door Security Solutions Canada harmless against all claims, liability, loss or other damages (including costs, legal or otherwise incurred by ASSA ABLOY Door Security Solutions Canada) to all persons for injury of any nature, including sickness and/or death, property damage at the time of delivery or after when the product is no longer in ASSA ABLOY Door Security Solutions Canada possession or control.

Force Majeur: ASSA ABLOY Door Security Solutions Canada shall not be liable for its failure to perform due to any contingencies beyond its control, including but not limited to acts of God, fires floods, wars, sabotage, accidents, labour disputes, shortages, government laws, ordinances, rules and regulations. ASSA ABLOY Door Security Solutions Canada shall not be liable for its failure to deliver due to its inability to obtain materials, equipment failure, labour actions, transportation issues or any similar contingencies.

In the event of delays due to the aforementioned contingencies, the date of delivery will be postponed by such length of time as the circumstances dictate.

Copyrights and Patents: All products in ASSA ABLOY Door Security Solutions Canada catalogues, brochures and price lists are either patented, Copyrighted or registered by ASSA ABLOY Door Security Solutions Canada.


wa

rr

an

ties



Standard Powder Coat FiniSheS (LiSt PriCe adder)

$208.00/hinge, $104.00/edge guard-no minimum quantity, up to 8'.

$416.00/hinge, $208.00/edge guard for lengths over 8', up to 10'.

Over 10' consult factory.

minimum $ charge for 1 to 3 hinges or edge guards. Standard pricing applies for larger quantities.

Nearest

Markar EquivalentBHMA Description

690 PC-1 Dark Bronze

714 PC-2 Eggshell White

693 PC-3 Semi-Gloss Black

689 PC-4 Aluminum

706 PC-5 Sun Gold

691 PC-6 Light Copper

605 PC-7 Polished Brass – refer to pricing below

PC-7 Polished Brass.

100 and 300 series only.

$370.00/hinge, $185.00/edge guard, up to 8'.

$583.00/hinge, $289.00/edge guard up to 8'.

CuStom Powder Coat FiniSheS

Over 84 colors available.

Sample color chip must accompany order.

Priced at time of order.

SPeCiaL FiniSheS

Nearest

US EquivalentBHMA Description Up to 8' 8' to 10'

672 US26 Polished Aluminum $608.00/hinge $763.00/hinge

629 US32 Polished Stainless $608.00/hinge $763.00/hinge

Kynar Paint With Color Approval, consult Factory.

Over 10' consult factory.

hin

ge

fin

ish

es



u.S. Standard & B.h.m.a. FiniSh CodeS reFerenCe LiSt

Nearest

US EquivalentBHMA Description

310 US3 gold anodized

311 US9 light bronze anodized

312 medium bronze anodized

313 US20A dark bronze anodized

315 US19 black anodized

600 USP primed for paint

603 US2G zinc plated

628 US28 clear anodized

629 US32 bright stainless steel

630 US32D satin stainless steel

672 US26 bright polished aluminum

689 US28 aluminum paint

690 US20A dark bronze paint

691 US10 light bronze paint

693 US19 black paint

706 US4 gold paint

714 white paint

SPeCiaL anodized FiniSheS

Nearest

US EquivalentBHMA Description

310 US3 gold anodized

311 US9 light bronze anodized

312 medium bronze anodized

315 US19 black anodized

Add $112.00/hinge to bronze price.

$299.00 net setup charge.

hin

ge fin

ishes



hinge PreFixeS

EG Edge GuardFM Edge Mount FS Full SurfaceHG Hinge/GuardHM Half MortiseHS Half SurfaceSC Swing Clear

hinge SerieS

100 Aluminum barrel hinges with stainless steel pin200 Carbon steel barrel hinges with stainless steel pin300 Stainless steel barrel hinges with stainless steel pin400 Spring loaded aluminum toilet partition hinges900 Spring loaded stainless steel toilet partition hinges3500 12 gauge stainless steel pin and barrel security hinges

Series number indicates the type of hinge and base material used.

hinge modeLS

00 Edge mount (formerly full mortise)01 Full surface 1/8" offset02 Full surface, flush03 Half surface, 1/8" offset04 Half mortise, 1/8" offset05 Edge mount hinge/guard06 Half mortise hinge/guard08 Edge guard09 Full surface, swing clear10 Swing clear hinge/guard11 Edge mount, self aligning15 Edge mount, self aligning flush edge guard21 Full surface inset, 3/4" offset22 Edge mount hinge/guard, deep2325

Edge mount hinge/guard, deep, thru boltEdge mount swing clear

26 Edge mount hinge/guard, swing clear27 Edge mount, safety hinge29 Edge mount, self aligning

The last two digits of the model number indicate the application.Other numbers are used for specific applications.

hin

ge

nu

mb

erin

g s

yst

em a

nd

sta

nd

ar

d l

eng

th

s

LEFT HAND RIGHT HAND

LEFT HANDREVERSE

RIGHT HANDREVERSE



oPtion SuFFixeS

AMS Adjustable Monitoring Switch

CTP Current Transfer Preparation

DDP Dutch Door Prep

EL ElectroLynx® Current Transfer

ETAP Electrical Transfer Access Prep

EPT Electrical Power Transfer

HT Hospital Tip

LL Lead Lined

PC Powder Coated

RB Raised Barrel

WT Wide Throw

Standard hinge Length ConverSion Chart

Door Opening Actual Length

6'8" 79-3/16"

7'0" 83-1/8"

7'2" 85-1/8"

8'0" 95"

10'0" 118-3/4"

Custom hinge length will be evaluated at the time of

request to ensure proper pin to knuckle alignment.

Some custom length requests may be adjusted to

ensure a proper hinge assembly.

SPeCiFy handing on aLL CuStom hinge LengthS

CuStom deSign

Markar’s engineering department is willing to

assist you in developing custom applications to

solve any of your unique door hinging

problems. Together with the customer, we will

go through an official sign-off process to

assure custom hinges fit your exact needs.

There will be a custom drawing approval fee

of $174.00 per opening. A credit for this fee

is issued after approval for fabrication and

placement of purchase order.

hin

ge n

um

ber

ing

syst

em a

nd

stan

da

rd

leng

th

s



Hinge Suffix Description

Addition to hinge cost

HT-MP Hospital TipAvailable on all models except spring-loaded toilet partition hinges.

+$ 96.00

DDP-MP Dutch Door PrepContinuous frame leaf with two-piece door leaf.Indicate handing, clearances, door and frame heights, and materials when ordering.Available on all models.

+$ 96.00

WT Wide Throw — FM300WTSpecify distance from pin centerline to heel edge of hinge when ordering.Note: Reinforcement may be required on extreme wide throw applications. Please contact our Customer Service or Technical Support departments at (800) 824-3018.

Page 13 for pricing

RB-MP Raised Barrel (Swaged)For cased open or center pivot doors.Available on all edge mount and half surface models except on aluminum hinges.

+$ 82.00

LL-MP Lead Lined Cover (Standard 4 Lbs./SQ.FT.)Used for X-ray room doors and other locations where radiation leakage could be a problem. Only available on surface mounted hinges. Lead lined astragal for EGT + $333.00 Staggard hole pattern for Edge Guard + $70.00

+$ 195.00 Per cover

Sheared LeafCustom hinge information form required.Contact Customer Service at (800) 824-3018.

Custom Hole PatternAny hole shape or pattern other than Markar's standard templated hole pattern. Indicate desired pattern and include dimensioned diagrams when ordering.

Up to 85" +$ 162.00 Over 85" +$ 208.00

Security StudsStainless steel security studs mounted to the frame leaf.Door leaf is drilled to accommodate studs. Three studs installed on hinges up to 85-1/8", four studs installed on hinges over 85-1/8". Door and frame must be specially prepared to accommodate security studs.

Up to 85" +$ 139.00 Over 85" +$ 185.00

Automatic Door Bottom Cut +$ 80.00

Welded End Pins +$ 105.00

Plug Weld +$ 78.00

Blank Hinges Holes omitted for special applications such as welded installations. +$ 116.00

Cut to Length• For hinges 40" to 83-1/8" in length, add $70.00 to 7'0" price • For hinges 83-3/16" to 95" in length, add $70.00 to 8'0" price • For hinges 95-1/16" to 118-3/4" in length, add $70.00 to 10'0" price• For hinges 118-13/16" to 192" in length (spliced), consult factory• For edge guards add $39.00

co

nt

inu

ou

s h

ing

e m

od

ific

at

ion

s



Product Number Description

Addition to hinge cost

ElectroLynx® Current Transfer Hinges WT Hinges

EL4 For 300, 3500, 100, and 200 series edge mount only. With ElectroLynx® connectors (4 wire).

+$520 .00 +$ 720.00

EL8 For 300, 3500, 100, and 200 series edge mount only. With ElectroLynx® connectors (8 wire).

+$ 693.00 +$ 960.00

EL12 For 300, 3500, 100, and 200 series edge mount only.With ElectroLynx® connectors (12 wire). Note: Add $200.00 for FM300WT20 thru FM300WT50

+$ 924.00 +$ 1,200.00

Note: When ordering, add either Hinge or WT Hinge additional cost.

ETAP Electrical Transfer Access PrepCutout prep for the AMS and EL. Modifications allow easy one person access to wiring between the hinge and door frame.

+$ 204.00

CTP Current Transfer PrepCenterline of hinge is standard location. Hinge leaf cutout to accommodate Markar's EL-EPT/EL-CEPT or Von Duprin's Electric Power Transfer. Provide location and handing for all locations.

+$ 112.00

CTP Add $ 139.00 to the cost of these models. 3505, 305, 322, 323, 325, 326, 329

Electric Power Transfer Units

EL-EPT Stamped Power Transfer 12 Wire ElectroLynx® +$ 229.00

EL-EPTL Stamped Long Power Transfer 12 Wire ElectroLynx® +$ 297.00

EL-EPT-SC Stamped Swing Clear Power Transfer 12 Wire ElectroLynx® +$ 396.00

EL-CEPTx32D Cast Power Transfer 12 Wire ElectroLynx® US32D +$ 578.00

EL-CEPTx10B Cast Power Transfer 12 Wire ElectroLynx® US10B +$ 601.00Note: CTP prep charge is additional.

AMS Adjustable Monitoring SwitchRigid welded assembly gives you the ability to adjust your monitoring switch to work with all applications. Not available on aluminum hinges or powder coat finishes.

+$ 553.00

Standard Edge Guard Cutouts - Add for each cutout.

For custom cutouts, consult factory for pricing. Templates may be required.

16L 1-1/8" x 2-1/4" 161 Latch +$ 58.00

86M 1-1/4" x 8" Mortise Lock +$ 58.00

ASA 1-1/4" x 4-7/8" ASA Strike +$ 58.00

16S 1-1/8" x 2-3/4" 161 Strike +$ 58.00

MFB 1" x 6-3/4" Manual Flush Bolt +$ 58.00

AFB 1" x 8-1/2" Automatic Flush Bolt +$ 58.00

Cut down charge for special lengths +$ 38.00

Security FastenerPage 25 for

pricingTorx head security fasteners are available in lieu of standard fasteners.See hinge types for options. Refer to pages 25-27 for detailed fastener information.

co

nt

inu

ou

s hin

ge a

nd

edg

e gu

ar

d m

od

ifica

tio

ns

OPEN 180°

3/4"

OPEN 90°CLOSED

5/8"

1 15/16"

1 5/8"

2 5/16"



Product Number Description Standard Finish Length

SuggestedList Price

FM3500 Edge Mount Security Hinge

Satin Stainless Steel 6'8" (79-3/16") $ 1,052.00


Standard Screw PackMS1244SP10SS24 Security Screw Pack (Optional)M91-0031


Satin Stainless Steel 8'0" (95") $ 1,236.00


FS3501 Full Surface Security Hinge 1/8" Inset



Standard Screw PackMS1244SP10SS24

Security Screw Pack (Optional)M91-0031




FS3502 Full SurfaceSecurity Hinge



Standard Screw Pack MS1244SP10SS24

Security Screw Pack (Optional) M91-0031




HG3505 Hinge GuardSecurity Hinge



Standard Screw PackMS1244SP10SS24





Adjustable Screw Pack (Optional)M91-0002-630

• All hinges come with UL fire rated label as standard• FM3500 can be used on doors up to 2-1/4"• Hospital Tip is a standard feature at no additional charge• Security Fasteners – refer to pages 25-27• When ordering Security Screw Packs, please specify either All Wood (WW), All Metal (MM) or

Half Metal/Half Wood (MW)• Adjust-A-Screw™ option is available for applicable models as shown. – add $30.00 per Edge Guard• See page 25 for Screw Pack Pricing

Optional

3500

ser

ies

sta

inle

ss s

tee

l pi

n a

nd

ba

rr

el s

ecu

rit

y h

ing

es

P. NGUYEN

B

P. NGUYEN

B




SuggestedList Price

FM300 Edge MountPin and Barrel Hinge

Satin Stainless Steel 6'8" (79-3/16") $ 578.00


Standard Screw Pack KMPSS



Satin Stainless Steel 8'0" (95") $ 670.00


FM300WT10 Edge Mount — Wide ThrowPin and Barrel Hinge 2" Clearance






FM300WT20 2-9/16" Clearance add $ 698.00

FM300WT30 3-3/16" Clearance add $ 698.00

FM300WT40 3-7/8" Clearance add $ 1,092.00

FM300WT50 5" Clearance add $ 1,092.00

Standard Screw Pack FM300WT10: KMPSSFM300WT20 thru FM300WT50: KMPWTM Security Screw Pack (Optional)M91-0031

Consult factory for doors over 1-3/4" thick.

FS301 Full Surface 1/8" InsetPin and Barrel Hinge



Standard Screw Pack M91-0003-630

Security Screw Pack (Optional)M91-0063-630




FS302 Full Surface Flush MountPin and Barrel Hinge








HS303 Half SurfacePin and Barrel Hinge



Standard Screw Pack M91-0003-630, TKS1267SP10SS23

Security Screw Pack (Optional)M91-0031, M91-0063-630




300 series sta

inless st

eel pin a

nd

bar

rel h

ing

es

Optional

OptionalOPEN 180°

3/4"

OPEN 90°CLOSED

5/8"

1 15/16"

1 5/8"

2 5/16"




SuggestedList Price

HM304 Half MortisePin and Barrel Hinge



Standard Screw Pack M91-0003-630, TKS1267SP10SS23





HG305 Hinge/GuardPin and Barrel Hinge



Standard Screw PackKMPSS






HG306 Hinge/GuardPin and Barrel Hinge



Standard Screw Pack TKS1267SP10SS23, M91-0003-630





EG308 Adjustable Edge Guard*Use attached order form on page 29









Standard for 1-3/4" bevel edge doors; square edge available upon request. See page 11 for optional hardware cutouts and cut to net size.

EGC308 Single Return Edge Guard*Use attached order form on page 29.









300

ser

ies

sta

inle

ss s

tee

l pi

n a

nd

ba

rr

el h

ing

es

1/2"

3/4"

1 11/16"

1/8"

1 3/4"

3/4"

1 15/16"

5/8"

1/4"




SuggestedList Price

EGT308 Adjustable Edge Guard/ Astragal*Use attached order form on page 29.










FS/SC309 Full Surface Swing ClearPin and Barrel Hinge



Standard Screw Pack M91-0003-630, KMSSS





HG310 Swing Clear Hinge/GuardPin and Barrel Hinge









For square edge doors.










HG315 Edge Mount Hinge/GuardPin and Barrel Hinge








Optional

Optional

300 series sta

inless st

eel pin a

nd

bar

rel h

ing

es

CLOSED OPEN 90°

1 15/16"

1 11/16" 5/8"

2 5/16"

OPEN 180°

11/16"

1/16"

2 1/4"

4 1/2"

1 23/32"

5/8"

5/32"

1 15/16"




SuggestedList Price

FS321 Full Surface 3/4" OffsetPin and Barrel Hinge




















Standard Screw PackM91-0064-02-630





FM/SC325 Edge Mount Swing Clear Hinge


Satin Stainless Steel 7'0" (83-1/8") $ 901.00Standard Screw Pack KMPSS















Optional

Optional


300

ser

ies

sta

inle

ss s

tee

l pi

n a

nd

ba

rr

el h

ing

es




SuggestedList Price

FM327 Edge Mount Safety Hinge Pin and Barrel Hinge



NON-FIRE RATED Satin Stainless Steel 7'2" (85-1/8") $ 1,132.00

Standard Screw Pack KMPSS Security Screw Pack (Optional)M91-0031



HG329 Swing Clear Hinge/Guard Pin and Barrel Hinge








FM338 Edge Mount Pin & Barrel Hinge for 1-3/8" Thick Door



NON-FIRE RATED Satin Stainless Steel 7'2" (85-1/8") $ 660.00




FM344 Short Leaf Edge Mount Pin & Barrel Hinge







FM600 316 Stainless Steel Edge Mount Pin & Barrel Hinge





• All applicable hinges come with UL fire rated label as standard. Please specify if WHI label is required.• When ordering Security Screw Packs, please specify either All Wood (WW), All Metal (MM) or

Half Metal/Half Wood (MW).• Add $ 57.00 list per hinge for optional thru-bolts (M91-0064-01-630).• Adjust-A-Screw™ Option for Edge Guards – add $30.00 per Edge Guard.• MTSP100 is recommended for installing HG310 & HG311.• See page 25 for Screw Pack Pricing.


Consult factory for hinges over 7 ft.

300 series sta

inless st

eel pin a

nd

bar

rel h

ing

es




SuggestedList Price

FM200 Edge MountPin and Barrel Hinges

Zinc Plated Steel 6'8" (79-3/16") $ 439.00





Zinc Plated Steel 8'0" (95") $ 532.00

FS201 Full Surface 1/8" InsetPin and Barrel Hinges



Standard Screw PackM91-0003-630




FS202 Full Surface Flush MountPin and Barrel Hinges







HS203 Half SurfacePin and Barrel Hinges







HM204 Half MortisePin and Barrel Hinges







• All hinges come with UL fire rated label as standard.• Please specify if WHI label is required.• When ordering Security Screw Packs, please specify either All Wood (WW), All Metal (MM) or

Half Metal/Half Wood (MW).• Add $63.00 list per hinge for optional thru-bolts (M91-0064-01-630).• Finish is zinc plated steel. See page 6 for additional finish options.• See page 25 for Screw Pack Pricing.

200

ser

ies

ca

rbo

n s

tee

l pi

n a

nd

ba

rr

el h

ing

es



Product Number Description Length

Standard Finish

SuggestedList Price

StandardFinish

SuggestedList Price

FM100 Edge MountPin and Barrel Continuous Hinges

6'8" (79-3/16") Clear Anod $ 532.00 Bronze Anod $ 578.00


Standard Screw Pack Aluminum: KMPSS Bronze: M91-0001-313

Security Screw Pack (Optional)Aluminum: M91-0031Bronze: M91-0030


8'0" (95") Clear Anod $ 613.00 Bronze Anod $ 717.00

FS101 Full Surface 1/8" InsetPin and Barrel Continuous Hinges



Standard Screw Pack Aluminum: M91-0003-626Bronze: M91-0003-313




FS102 Full SurfacePin and Barrel Continuous Hinges



Standard Screw Pack Aluminum: M91-0003-626Bronze: M91-0003-313




HS103 Half SurfacePin and BarrelContinuous Hinges



Standard Screw Pack Aluminum: M91-0003-626, KMSSS Bronze: M91-0001-313, M91-0003-626

Security Screw Pack (Optional) Aluminum: M91-0031, M91-0047-630Bronze: M91-0030, M91-0047-313



HM104 Half Mortise Pin and Barrel Continuous Hinges



Standard Screw Pack Aluminum: M91-0003-626, KMSSS Bronze: M91-0001-313, M91-0003-626

Security Screw Pack (Optional) Aluminum: M91-0031, M91-0047-630Bronze: M91-0030, M91-0047-313



100 series a

lum

inu

m pin

an

d ba

rr

el co

nt

inu

ou

s hin

ges

Optional




Standard Finish

SuggestedList Price

Standard Finish

SuggestedList Price

HG105 Hinge/Guard Pin and Barrel Continuous Hinges



Standard Screw Pack Aluminum: KMPSS Bronze: M91-0001-313

Security Screw Pack (Optional)Aluminum: M91-0031Bronze: M91-0030



Adjustable Screw Pack (Optional)Aluminum: M91-0002-630 Bronze: M91-0002-313

EG108 Edge Guard Pin and Barrel Continuous Hinges*



Standard Screw Pack Aluminum: M91-0013-628 Bronze: M91-0013-313

Adjustable Screw Pack (Optional)Aluminum: M91-0005-630Bronze: M91-0005-313

Security Screw Pack:Aluminum: M91-0031Bronze: M91-0030



Standard for beveled edge doors * Use attached order form on page 29.

• When ordering Security Screw Packs, please specify either All Wood (WW), All Metal (MM) or Half Metal/Half Wood (MW).

• For optional M26-0015-02 Molly Jack Nuts add $4.00 (per each) list..• Add $6.00 per hinge for optional thru-bolts (Clear : M91-0004-02-626, Bronze: M91-0004-02-313)• Aluminum 628 clear anodized.• Bronze 313 dark bronze anodized.• Adjust-A-Screw™ option available for applicable models as shown. Add $30.00 per hinge.• See page 25 for Screw Pack Pricing.• Aluminum pin and barrel hinges are NOT FIRE-RATED.

Optional

100

ser

ies

alu

min

um

pin

an

d b

ar

rel

co

nt

inu

ou

s h

ing

es



Aluminum ToileT PArTiTion Hinges

FM400 Full Mortise Spring Loaded Pin & Barrel Toilet Partition Hinges

Clear Anod Aluminum 54" $ 588.00


FS402 Flush Spring Loaded Pin and Barrel Toilet Partition Hinges*Safety lift feature available.




• Door weight shall not exceed 80 pounds.• Add $55.00 for Safety Lift Feature on applicable models.• Add $72.00 for one-way shoulder bolt security option for FS402.• Special length hinges (24" long minimum; less than 54") + $131.00/hinge. (Check factory for over 54" length).


SuggestedList Price


SuggestedList Price

FM900 Full Mortise Spring-LoadedPin and BarrelToilet Partition Hinges

Satin Stainless Steel


54"

57"

$ 618.00

$ 630.00

FS902 Flush Spring-LoadedPin and BarrelToilet Partition Hinges



54"

57"

$ 755.00

$ 785.00

FS910 Flush Spring-Loaded Surface-Mounted Toilet Partition Hinges




54"

57"

72"

$ 705.00

$ 705.00

$ 763.00

• For full function of Markar’s spring-loaded hinge, door weight shall not exceed 80 pounds.• Add $53.00 for torx drive/torx shoulder security option.• Special length hinges (24" long minimum, less than 54") + $97.00/hinge. (Check factory for over 54" length).

sTAinless sTeel ToileT PArTiTion Hinges

toilet pa

rt

itio

n h

ing

es



ConTinuous Hinge sHims

Product Number Description Properties Length

SuggestedList Price

CHS-1 Continuous Hinge ShimSlip-In Installation.

16 gauge (1/16" thickness) 6'8" (79-3/16") $ 74.00

16 gauge (1/16" thickness) 7'0" (83-1/8") $ 76.00

16 gauge (1/16" thickness) 8'0" (95") $ 79.00

CHS-2 Continuous Hinge ShimHinge must be removed.

16 gauge (1/16" thickness) 6'8" (79-3/16") $ 89.00

16 gauge (1/16" thickness) 7'0" (83-1/8") $ 93.00

16 gauge (1/16" thickness) 8'0" (95") $ 96.00

• Not available in 10'0" length.• Cut down charge for special lengths $39.00.• 16 gauge galvanneal.

Let markar’S ContinuouS hinge Shim SoLve your ProBLem oF non-Square FrameS and imProPer door CLearanCeS.

ChS-1 ChS-2

toil

et p

ar

tit

ion

hin

ges

&

co

nt

inu

ou

s h

ing

e sh

ims



Product Number Description Standard Finish

SuggestedList Price

B1921 Full Surface1/2" offset for 4" Hinges

Zinc Plated (US2G) $95.00

B1923 Full Surface3/4" offset for 4 1/2" Hinges

Zinc Plated (US2G) $95.00

reinforCing PivoT Hinges

surfACe leAf Hinge PArTs

mill 200 series Hinges

BrusHed 300 series Hinges


Standard Finish

SuggestedList Price

Standard Finish SuggestedList Price

MP810 Snap-on cover 100 Series





Specify door height and finish.

MP506 Snap-on cover 200 and 300 Series

6'8" (79-3/16") Mill $ 51.00 Brushed $ 77.00

7'0" (83-1/8") Mill $ 51.00 Brushed $ 77.00

7'2" (85-1/8") Mill $ 52.00 Brushed $ 81.00

8'0" (95") Mill $ 54.00 Brushed $ 86.00

10'0" (118-3/4") Mill $ 70.00 Brushed $ 107.00

Specify door height and finish. 200 Series: Mill Finish300 Series: Brush Finish


SuggestedList Price

MP606 Cover clipFor attaching MP506 cover caps to surface mounted 200 and 300 series hinge leaves (Quantity 20).

$ 28.00

rein

for

cin

g piv

ot h

ing

es an

d su

rfa

ce h

ing

e leaf pa

rt

s




SuggestedList Price

TORXBIT20 Used on TORX-MS1244SP10SS, TORX-PBS12150SP10SS, and TORX-MS10075SS.

$ 12.00

TORXBIT27 Used on S312C14T12-630 and to adjust 400 and 900 series spring-loaded hinges.

$ 12.00

TORXBIT15 Used on TORX-TKS8075Z $ 12.00

MT-806 Center punch for centering screw holes when installing hinges and countersunk hardware.

$ 21.00

MTSP100 Right angle screwdriver used for installing HG-310 and HG-311 hinge/guards. $ 209.00

M29-0011-02 Installer rod for installing Molly Jack nuts with M29-0012-01 installer (8S-JN 1/4-20 nuts). (formerly MT-R-3)

$76.00

M29-0012-01 Molly Jack Nut installer includes 1/4-20 installer rod. $629.00

MP-UBOX Hinge Carton. Please specify (a) Length (b) 1" x 3" (c) 1-1/2" x 3". $ 15.00

too

ls a

nd

ac

ces

sor

ies



Product Number Screw Types Included* Quantity Each

SuggestedList Price

M91-0001-313 TKS1267SP10BLR 42 $ 37.00

M91-0002-313 M26-0031-01, MS10075SSBL 23 $ 82.00

M91-0002-630 M26-0031-01, MS10075SS 23 $ 80.00

M91-0003-313 S323-08R12-663 TORX-TKS14075R

2 16

$ 12.00

M91-0003-626 TORX-TKS14075RTKS8075Z

162

$ 12.00

M91-0003-630 TKS8075ZM22-0130-01TORX-TKS14075R

2616

$ 19.00

M91-0004-02-313 TB1420BLS222-416R16-603TORX-TKS14075R S323-08R12-663

6 6 16 2

$ 65.00

M91-0004-02-626 TB1420ZS222-416R16-603TORX-TKS14075R TKS8075Z

6 6 12 2

$ 65.00

M91-0005-630 MS10075SS, M26-0031-01 12 $ 35.00

M91-0013-628 PBS12150SP10SS, TKS1267SP10SS 9 $ 12.00

M91-0013-313 PBS12150SP10BL, TKS1267SP10BL 9 $ 14.00

M91-0020-630 PBS12150SP10SS, TKS1267SP10SS 9 $ 12.00

M91-0030MM TORX-T20MS1244BL 48 $ 58.00

M91-0030MW TORX-T20MS1244BL, TORX-T20PBS12150BL 24 $ 58.00

M91-0030WW TORX-T20PBS12150BL 48 $ 58.00

M91-0031MM TORX-MS1244SP10SS 48 $ 55.00

M91-0031MW TORX-MS1244SP10SS, TORX-T25PBS12150SS 24 $ 55.00

M91-0031WW TORX-T20PBS12150SS 48 $ 55.00

M91-0032-630 TORX-MS1244SP10SSTORX-MS10075SS, M26-0031-01

24 23

$ 55.00

M91-0033MM TORX-TKS1267SP10SS 48 $ 96.00

M91-0033MW TORX-TKS1267SP10SS, TORX-T20PBS12150SP10SS 24 $ 77.00

M91-0046-630 TORX-BHMS100Z, TB1420SS 11 $ 72.00

M91-0047-313 TORX-TKS14075R TORX-TKS8075BL

16 2

$ 36.00

M91-0047-630 TORX-TKS14075RTORX-TKS8075Z

162

$ 16.00

M91-0063-630 TORX-TKS8075ZTORX-TKS14075RM22-0130-01

2166

$ 24.00

M91-0064-02-630 TKS1267SP10SSMS14075TSS, TB1420SS

2311

$ 141.00

KMPBL TKS1267SP10BLR 42 $ 31.00

KMSSS TKS1267SP10SS, PBS12150SP10SS 23 $ 49.00

KMPSS TKS1267SP10SS 46 $ 24.00

*See pages 26-27 for Screw Type Descriptions

scr

ew pa

ck

s - sold

separ

at

ely



Product Number Description Properties

SuggestedList Price

12-24 x 11/16 x #10 Head, Flat Head Undercut Self-Drilling Screw

TKS1267SP10SS23 (23 Pack) Stainless Steel $ 12.00

TKS1267SP10BL24 Replaces MP-10, MP-11, MP-12 (24 Pack) Black Zinc $ 14.00

TORX-TKS1267SP10SS24 (24 Pack) Stainless Steel $ 12.00

TORX-TKS1267SP10BL24 (24 Pack) Black Zinc $ 12.00

#8 x 3/4" Flat Head Self-Drilling Screw

TKS8075Z Formerly MP-8; For attaching 100, 200, and 300 series covers (Per each)

Zinc Phillips $ 2.00

S323-08R12-663 Formerly MP-9; For attaching 100, 200, and 300 series covers (Per each)

Black $ 2.00

TORX-TKS8075Z Formerly MP-61; For attaching 100, 200, and 300 series covers (Per each)

Zinc Torx $ 2.00

12-8 x 1-1/2 x #10 Head, Particle Board Screw

PBS12150SP10SS24 Formerly MP-28; For edge mounting to wood (24 Pack)

Stainless Steel $ 8.00

PBS12150SP10BL24 Formerly MP-29; For edge mounting to wood (24 Pack)

Black $ 9.00

TORX-PBS12150SP10SS24 Formerly MP-54; For edge mounting to wood Security Fastener with Security Pin (24 Pack)

Stainless Steel Torx

$ 25.00

TORX-PBS12150SP10BL24 Security fastener with Security Pin (24 pack) Black Stainless Steel Torx

$ 32.00

1-3/8" Adjust-A-Screw™ With 10-32 Internal Thread and Hex Head Adjustment

M26-0031-01 Formerly MP-25; Right Hand used with MS10075 screw (Per each)

$ 3.00

Note: 5/16" pilot hole required for 3/8" - 16 tap 12 ga. reinforcement required

10-32 x 3/4" Flat Head Machine Screw

MS10075SS Formerly MP-7; Used with M26-0031-01 Adjust-A-Screw™ (Per each)

Stainless Steel Phillips

$ 1.00

TORX-MS10075SS Formerly MP-55; Used with M26-0031-01 Adjust-A-Screw™ (Per each)

Stainless Steel Torx

$ 2.00

MS10075BL Used with M26-0031-01 Adjust-A-Screw™ (Per each)

Black SS $1.00

TORX-MS10075BL Used with M26-0031-01 Adjust-A-Screw™ (Per each)

Black SS Torx $2.00

fast

ener

pr

icin

g



Product Number Description Properties

SuggestedList Price

12-24 x 7/16 x #10 Head, Flat Head Undercut Machine Screw, with Security Pin, Tri-Round Threads

TORX-MS1244SP10SS24 Formerly MP-52; For edge mounting to metal (24 Pack) T-25 RECESS

Stainless Steel Torx $ 25.00

TORX-T20MS1244SP10BL24 (24 Pack) T-20 RECESS Black SS Torx $ 27.00

3/16 x 1-1/4 Phillips Flat Head Concrete Screw

TC316125 Formerly MP-60; (Per each) Zinc $ 1.50

1/4-20 x 1-5/8" Thru-bolt

TB1420Z4 Formerly MP-22; For surface mounting to wood (4 pack)

Zinc Steel $ 7.00

TB1420SS Formerly MP-23, replaces MP-38. For surface mounting to wood (Per each)

Stainless Steel $ 11.00

TB1420BL4 Formerly MP-56 For surface mounting to wood (4 Pack)

Black $ 7.00

1/4-20 x 1-1/4" Thru-bolt

TB138Z Formerly MP-24 For surface mounting to wood (Per each)

Zinc $ 2.00

8 SJN 1/4-20 Molly Jack Nut

M26-0015-02 Formerly MP-20; 7/16" hole (Per each) Zinc $ 4.00

1/4-20 x 3/4" Pan Head Self-Drilling Self-Tapping Screw

TORX-TKS14075R Formerly MP-62; For surface mounting to metal (Per each)

Zinc Torx $ 2.00

1/4-20 x 1" Pan Head Machine Screw

S222-416R16-603 Formerly MP-14; For surface mounting to metal (Per each)

Zinc Phillips $ 1.50

TORX-MS14100Z Formerly MP-65; For surface mounting to metal (Per each)

Zinc Torx $ 2.00

fast

ener pr

icin

g




SuggestedList Price

FA68 Flat Astragal (each) Galvanneal For 6'8" door $ 89.00



• Holes are countersunk and equally spaced• 1/8" x 2" galvanneal steel• Available with thru-bolt option - add $21.00 for nine-pack (ZTB-KIT9) or $24.00 for eleven-pack (ZTB-KIT11)

Fa70Fa68 Fa80

fla

t a

str

ag

als



*DRAWING SUBMITTAL AND FACTORY APPROVAL REQUIRED PRIOR TO ORDER ENTRY

VAUGHAN, ONTel: 800.461.3007Fax: 800.461.8989

edg

e gu

ar

ds o

rd

er for

m

32

800-824-3018 www.markar.com

Prices Effective June 8 th, 2015


To process order, please circle handing illustrated below.

VAUGHAN, ONTel: 800.461.3007Fax: 800.461.8989

cu

rr

ent t

ra

nsf

er p

rep

info

rm

at

ion

fo

rm

Copyright © 2012-2015, Pemko Manufacturing Co., an ASSA ABLOY Group Company. All Rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.

ASSA ABLOY Door Security Solutions Canada160 Four Valley DriveVaughan, ON L4K 4T9T: 800-461-3007www.assaabloy.ca

6/15

Markar 2015 Canadian Price List - Locks Access Control ... Books/2015 Price Books... · Markar 2015...

Documents

Transcript of Markar 2015 Canadian Price List - Locks Access Control ... Books/2015 Price Books... · Markar 2015...