Maritime2

- Available GSA Contract- Available PV Contract

order online www.amronintl.com760 • 208 • 6500

157


KIRBY MORGAN 37 COMMERCIAL DIVER’S HELMETSEE BELOW

500-050 Kirby Morgan 37 w/ bare wire posts

500-051 Kirby Morgan 37 w/ male W.P. conn.

Kirby Morgan 37 Commercial Dive Helmet consists of two major

assemblies: the helmet shell/helmet ring assembly and the neck

dam/neck ring assembly. The fully adjustable SuperFlow™ 350

demand regulator provides an easier breathing gas flow during

peak work output.

The Kirby Morgan 37 also includes a Quad-Valve™ Exhaust System

which retrofits to SL17 A/B, SL17K, and KM37. It’s recommended

for diving in biologically contaminated water. A quick change

communications module, available with either bare wire posts or

a waterproof connector, allows for easy, efficient maintenance of

the helmet’s communications.The KM 37 is configured to receive

the umbilical over the shoulder, in the “B” configuration.

• Steady flow valve

• Auxiliary valve

• Gas supply non-return valve

• Neck Dam/Yoke Assembly

• Low Pressure Plug

• Latch Catch Mechanism

• Quad-Valve™ Exhaust System

• Nose block device

• Silicone oral nasal mask

500-010 SuperLite 17B w/ bare wire posts

500-011 SuperLite 17B w/ male W.P. conn.

KIRBY MORGAN 17B COMMERCIAL DIVER’S HELMETSEE BELOW

The fully tested SuperLite-17B Commercial Diver’s Helmet set the

working standard for the commercial diving industry worldwide.

Many thousands of underwater hours have proved the design to

be dependable, comfortable, and extremely safe. SuperLite-17B is

Commercial Rated™ and has been tested and certified to meet or

exceed all requirements for all governing agencies. It is certified

for use in diving operations world wide.

The Kirby Morgan 17B also includes our Quad-Valve Exhaust

System which retrofits to many of our Helmets. It is recommended

for diving in biologically contaminated water, when you’re

properly trained and qualified, using recommended procedures.

This new exhaust has exceptionally low exhalation resistance

that you must experience to appreciate.


• Auxiliary valve


• Latch catch mechanism

• Water exhaust

• Quad-Valve ™ Exhaust system

• SuperFlow demand regulator

• Nose block device


Dive HelmetsD

ive

He

lme

ts

Kirby MorganK

irby

Mo

rga

n

158

order online www.amronintl.com 760 • 208 • 6500

- Available GSA Contract- Available GSA Contract

The Helmet Neck Ring design allows for evenly distributed

weighting of the helmet. The chrome plated machined brass

Helmet Ring houses the Latch Catches and provides protection

for the bottom end of the helmet. The diver is also provided with

an externally adjustable chin support. This support, along with

the adjustable neck pad on the locking collar, gives the diver a

comfortable, secure, custom fit.

The Helmet also features the SuperFlow 350 large tube adjustable

demand regulator which provides an easier breathing gas flow

during peak work output. The Helmet is available in the umbilical

over the shoulder, “B” configuration only.

• Head cushion


• Port weight

• Locking collar latch system

• Quick change modular comm system

• Externally adjustable chin strap

• Adjustable neck pad

• Head dam swing catch

KIRBY MORGAN SUPERLITE 27 DIVING HELMETSEE BELOW

500-040 SuperLite 27 w/ bare wire posts

500-041 SuperLite 27 w/ male W.P. conn.

500-025 18B Band Mask w/ bare wire posts

500-026 18B Band Mask w/ male W.P. connector

500-028 KMB28 w/ barewire posts

500-029 KMB28 w/ male W.P. connector

The fully tested and certified KMB 18B Band Mask may be used in

mixed gas diving as well as shallow water diving. The SuperFlow

adjustable demand regulators provide low inhalation resistance

and high gas flow letting the diver breathe easier and work

harder with less exertion. The KMB 18 now comes standard with

the large tube SuperFlow 350 regulator.

The Side Block Assembly of the KMB 18 receives the umbilical

over the shoulder in the B configuration. New patent pending

Band Mask® Band Keepers™. The Tri-Valve™ Exhaust System

(Patents Pending) has less breathing resistance than the older

single valve exhaust. It retrofits to all previous Kirby Morgan Band

Masks®. The communications connections can be either a male

waterproof plug in type or bare wire posts. The KMB 28B Band

Mask is very similar to the KMB 18. Many parts on the KMB 18B are

interchangeable with the KMB 28B.

The major difference between the 18 and 28 is the material of the

mask frame itself. The KMB 18 has a hand laid fiberglass frame

(yellow) while the KMB 28B (not shown) frame is an extremely

durable injection molded plastic (black).


• Auxiliary valve


• Tri-Valve exhaust whisker


KIRBY MORGAN 18B & 28B BAND MASKSEE BELOW

Dive HelmetsD

ive

Hel

met

s &

Mas

ksKirby Morgan

Kir

by M

orga

n



159


Dive HelmetsH

elmet A

ccessoriesKirby Morgan

Kirb

y M

org

an

OVERPRESSURE RELIEF VALVE200-017

The KMDSI Overpressure Relief Valve is factory adjusted to vent any time

the pressure in the low pressure hose connecting the bailout bottle to your

emergency valve exceeds 200 P.S.I. It is installed in any of the low pressure

ports in the first stage regulator.

MANIFOLD BLOCK ASSEMBLYSEE BELOW

The Manifold Block Assembly provides a control point for your bailout

supply when using a light weight full face mask like the EXO Mask®. It is

equipped with four low pressure outlets and a check valve. It is available

with a 9/16” O2 fitting or a #6 JIC fitting, or a standard SCUBA fitting.

Fittings

300-150 9/16 O2 fitting

300-155 JIC fitting

300-145 Standard SCUBA fitting

ORIGINAL EXO-26SEE BELOW

Complete, quick change communications assemblies are available with

standard bare wire post connections or male waterproof connector whip.

315-201 Comm. Assy w/posts

315-206 Comm. Assy w/W.P. connector

SUPERLITE 17, 17C & 18/28 COMMUNICATIONS ASSEMBLYSEE BELOW

Original, high quality replacements for the SuperLite 17, 17C Helmet, KMB 18 & 28 Mask communications.

515-030 Communications set

515-005 Right Earphone

515-006 Left Earphone

515-009 Microphone

160



WELDING LENS ASSEMBLY525-403This Welding Lens Assembly will fit the SuperLite 17 & 17C,

SuperLite 27, the KMB-18, and the KMB-28. The port retainers are

supplied with two plug screws which are designed to protect the

two threaded holes on the port retainer which are provided for

the welding lens assembly.

KMDSI is proud to announce a large Welding Shield which

covers the whole port area of your helmet or mask, and accepts

a standard 4 x 5 weld glass. This new shield will retrofit to all KMB

BandMasks and SuperLite helmets using the same mounting

holes as the original weld lens assembly.

FOR SUPERLITE-17 A/B, 17C, 17K, 27, HELMETS and KMB-18A/B &

28B BAND MASKS

WELD SHIELD ASSEMBLY525-400

Image courtesy of U.S. Navy

Dive HelmetsH

elm

et A

cces

so

rie

s

Kirby MorganK

irby

Mor

gan



161


INTERSPIRO MK II FACE MASK96319-06

The lightweight Interspiro MKII US Navy MK20 full face mask was designed

for maximum comfort. Perfect for all types of diving, especially for divers

who have to work in hostile diving conditions such as cold and polluted

water. The Interspiro full face mask maintains a constant, slight positive

pressure called Safety Pressure which is activated with the first inhalation.

Safety Pressure prevents water from leaking into the mask. The high volume

fully balanced second-stage regulator provides extremely low inhalation

and exhalation resistance. Interspiro Mask have been U.S. Navy tested

and approved. They are used extensively by military, police rescue, and

professional divers around the world.

• Automatic reserve warning

• Close fitting design

• Main parts have finger-tight fittings

• Silent operational mode

• Low volume dead space facemask

• Fit spectacles, communication devices and add-ons

• Optimum performance from the Arctic to the Equator

• Faceplate Lens

96319-06 Silicone Facemask, Black

OTS-900157-001Silicone Facemask, Gold, Non-pos. pressure

OTS-900157-006Silicone Facemask, Gold, Pos. pressure

KIRBY MORGAN EXO-BR FULL FACE MASK300-036

The EXO Full Face Mask is designed for both surface supplied and SCUBA

diving. Its light-weight design allows divers to work long dives without jaw

or neck fatigue. All models have a modular communications design that

permits rapid and simple maintenance. The optional Hard Shell provides

added surfaces for mounting lights, cameras etc. The ear equalization device

is a nose block which is adjustable to several different heights. The oral nasal

in the Standard and Balanced models help keep the CO2 levels to a minimum

and improves breathing and communications. The “EXO-BR” (Balanced

Regulator) is designed to meet or exceed recommended performance goals

in both SCUBA and surface supplied modes and is CE approved. It meets

and surpasses EN 250 requirements for regulator performance. The EXO-BR

Balanced Regulator helps reduce the work of breathing for the diver. The

regulator balances the intermediate air pressure against the valve sealing

pressure inside the regulator. This enables the regulator to instantly adjust

to changes in line pressure. The regulator is adjustable for a wide range of

intermediate pressures between 100-250 psi.

• EXO Skeleton Frame

• Head Harness

• EXO-BR BALANCED REGULATOR

• Regulator Adjustment

• Oral Nasal Mask

• Mask Seal

• Faceplate Lens

AEA-MT90 Throat Microphone

AEA-TK55 Sniper Ring Finger PTT

AEA-MT21 Microphone

Dive MasksD

ive

Ma

sk

s

Kirby MorganK

irby

Mo

rga

n •

Inte

rsp

iro

162



Built for exceptional durability, the Conshelf XIV continues to be

the world’s most popular Military and Professional Operations

regulator.

• World’s most popular military and professional regulator

• Durable, time-proven design

• Chrome-plated, marine brass 1st and 2nd stage

• Available in cold water “Supreme” version

• 1 High Pressure and 3 Low Pressure ports

• Approved for use by U.S. Navy

AQUA LUNG CONSHELF XIV1081-00

1081-00 Conshelf XIV

1088-00 Conshelf XIV, Supreme

1081-95 Overhaul Kit

• Integrated 1st stage and valve

• 36” LP hose with swivel

• Analog dial indicator

• 6.0 cubic foot aluminum cylinder

• Weight: 5.0 lbs (approx.)

AQUALUNG SPECIAL PARASCUBAUNDERWATER DIVING SYSTEM

1083-86

• ANU listed stand by diver safe second

• 39 in. LP hose

• Analog dial indicator


• Weight: 5.0 lbs (approx.)

AQUA LUNG CONSHELF XIVOCTOPUS REGULATOR

1082-00

Image courtesy of Ove Hoegh-Guldberg

Regulators & TanksR

eg

ula

to

rs

Aqua LungA

qua

Lun

g



163


Manufacturing

• Built from proprietary aluminum alloy 6061-T6, a balanced

aluminum-magnesium-silicon blend exclusive to Luxfer

• Manufactured to meet all U.S. (DOT) and Canadian (TC)

regulations

• Cycle-tested in excess of 100,000 cycles at service pressure

• Minimum burst pressure tested to 2.5 times service pressure

without failure

Exterior Finish

• Most Luxfer cylinders are painted with durable, premium-

quality powder coatings

• Shot Blast and Brushed No Coat cylinders are not painted,

making them ideal for rental, dive boats, etc.

• Aluminum is highly resistant to external corrosion

Interior Finish

• Aluminum is highly resistant to internal corrosion

Valves

• All Luxfer cylinders sold by XS Scuba include Thermo valves

• Standard inlet thread (3/4”-14 NPSM) allows upgrade to

Thermo PRO valve

• The Thermo PRO valve has a convertible design, allowing for

standard yoke or 230 bar DIN connections

• PRO valves are clean for pre-blended Nitrox up to 40% FO2

XS SCUBA ALUMINUM CYLINDERSSEE BELOW

Models

A06NV-YEL 6 cu ft, Yellow, No Valve

A06-YEL 6 cu ft, Yellow


A080NV-BLK80 cu ft, Black, No Valve

A080NV-YEL80 cu ft, Yellow, No Valve


• Self-draining

• Octagon-shaped rim

• Durable molded construction

XS SCUBA CYLINDER BOOTAC725

• 100% 316 stainless steel

• 16 gauge with #4 finish

• Fusion welds, passivated, polished

• Stainless steel mounting hardware

XS SCUBA STAINLESS STEEL CYLINDER BANDSB725

Regulators & TanksT

an

ks

XS ScubaX

S S

cu

ba

164



SUUNTO MARINERSUU-SS010932810

The main features of Suunto Mariner include a sailing timer, barometer, compass and watch. Its easy-to-read display with large numerals, backlight, and audible

warning signals let you concentrate more on maneuvering your vessel in

demanding conditions, while Suunto Mariner keeps you informed on up-coming

critical moments. Suunto Mariner features an accurate calendar watch with dual

time, an electronic compass, a barometer as well as a sailing timer especially

designed to meet the timing function requirements before and during a tough

race.

The Suunto Mariner is the most trusted first mate that gives you all

the information you need in one compact package 24 hours a day.

• Time: Calendar, dual time, three daily alarms, stopwatch, countdown timer

• Sail: Sailing timer with audible warning signals

• Barometer: Absolute pressure sea level pressure, last 6 hour pressure trend, 4-day pressure memory, temperature

• Compass: Cardinal bearing, North-South arrow, bearing tracking, start line

bias, declination setting

• Water resistant to 30 m (100 ft)

SUUNTO MOSQUITOSUU-SS005993100

Suunto Mosquito is an advanced wristop dive computer for active water sports

enthusiasts. With complete air and nitrox capabilities and a separate free diving

mode it is suitable for all kinds of diving. In addition to having information

available to you at all times, your Suunto Mosquito records and stores data for

later analysis. You can view, compare, and analyze your diving performance

through a specially designed PC interface.

The technical features, combined with the PC interface developed for more

graphical representation of your performance, and our Internet Community,

where you can share information with other like-minded divers from around the

world, make Suunto Mosquito ideal for divers who want their watch to tell more

than the time.

• Air, Nitrox and Free modes

• Complete watch functions

• PC interface compatible

• User-replaceable battery

• Suunto RGBM model

SUUNTO STINGERSUU-SS005970000

Suunto Stinger has everything a diver can ask for. It is the only wristop computer

in the world with separate Air, Nitrox and Free/Gauge modes, each of which has

a detailed profile memory.

All the advanced features, such as safety stop countdown, adjustable profile

memory sampling rate, underwater stopwatch and bookmarks, are easily

accessible.

• Complete watch functions

• Extensive memory functions

• Adjustable units

• Maximum Operating Depth Planner (Gauge mode)

• Suunto RGBM model

WatchesW

at

ch

es

SuuntoS

uu

nto



165


SUUNTO YACHTSMANSUU-SS010933310

Suunto Yachtsman features an accurate calendar watch with a countdown

timer and dual time display, Suunto´s famous digital compass, a barometer, and

a sailing timer designed to meet the timing requirements before and during a

tough race.

Suunto Yachtsman combines exclusive looks with the rock solid construction.

It is shockproof and waterproof to 30 m (100 ft). The non-allergenic aluminum

casing and the durable mineral crystal glass combined with a weatherproof

leather band make it the ultimate tool for discerning boaters.

• Time: calendar, dual time, three daily alarms, stopwatch, countdown timer

• Sail: Sailing timer with audible warning signals

• Barometer: absolute pressure sea level pressure, last 6 hour pressure trend,

4-day pressure memory, temperature

• Compass: Cardinal bearing, North-South arrow, bearing tracking,start line

bias, declination setting

SUUNTO D3SUU-SS005987808

Suunto D3 is an advanced wristop computer for freedivers and water sports

enthusiasts. Lightweight, streamlined and equipped with versatile dive, time

and alarm functions, it is the state-of-the-art freediving instrument and a perfect

bottom timer and back-up device for SCUBA diving. However, Suunto D3 is not a

dive computer and provides no decompression calculations.

In addition to having information available to you at all times, your Suunto D3

records and stores data for later analysis. You can view, compare, and analyze

your diving performance through a specially designed PC interface.

The technical features, combined with the PC interface developed for more

graphical representation of your performance, and our Internet Community,

where you can share information with other like-minded divers from around the

world, make Suunto D3 ideal for freedivers who take their diving seriously and

aim at reaching their peak.

• Free, Gauge and Watch modes

• 1-second sampling rate (Free mode)

• Countdown timer

• Repeatable dive time alarm

• Maximum Operating Depth Planner (Gauge mode)

• User-replaceable battery

• PC interface compatible

• Optional floating neoprene strap

SUUNTO ANALOG DEPTH GAUGE5254

• Luminous easy-to read analog dials

• Reliable and accurate open bourdon tube mechanism

• Maximum depth indicator

• 0-230FT, 0-5000PSI

Watches & GaugesW

at

ch

es

& D

ep

th

Ga

ug

es

SuuntoS

uu

nto

166



Like the tailfin of a Humpback whale, SCUBAPRO’s Twin Jet Fin uses a split

hydrofoil shape to deliver more forward motion with less effort. A whole lot

more kicking power with a whole lot less effort and drag: check out a Humpback, its “twin jet” tail can lift a mega-ton! As a result, the Twin Jet Fin is the fastest fin ever tested.

• Patented split-fin propeller technology. Proven to deliver more forward

motion with considerably less effort than traditional blades.

• Drag-reducing vents. Substantially decrease resistance on both up and

down strokes.

• Extended soleplate. Acts like a lever to enhance power stroke.

• Extra-wide foot pocket. Ideal for wearing with a dry or semi-dry suit.

• Quick-connect swivel buckles

• Black -Molded from a stiffer compound than other colors. Offers a more

traditional feel. Slightly negative buoyancy

• Graphite and Cobalt

-Softer, lighter, more flexible compound to achieve optimal efficiency

with minimal effort. Slightly positive buoyancy

• Hi-Viz™Yellow

-Softer compound like graphite and cobalt in extremely vibrant color

to afford the greatest visibility underwater. Slightly positive buoyancy

SCUBAPRO TWIN JET FINS, ADJUSTABLESEE BELOW

Part No. Size

25.385.200 Small (6-8)

25.385.300 Medium (8-10)

25.385.400 Large (9-12)

25.385.500 X-Large (11-13)

• Long history of performance. Considered the standard for power and durability since 1965

• Proven vented design decreases drag on the upstroke; enhances thrust on the downstroke

• Adjustable heel strap. Secures strap for ease of pre-dive preparation

SCUBAPRO JET FINSEE BELOW

Part No. Size

25.351.000 Medium (7-8)

25.350.000 Large (9-10)

25.352.000 X-Large (11-12)

25.352.100 XX-Large (11-13)

• A classic favorite• Popular among dry suit divers because of the large foot

pocket• Unique rubber compound allows greater efficiency by

reducing weight• Black rubber only

XS SCUBA TURTLE FINSFN305

FinsFi

nsScubapro

XS

Scu

ba •

Scu

bapr

o



167


• Integrated 1st stage and valve

• Swivel assembly has built in safety relief

• LP hose with QD fitting mates to most dry suit valves


AQUA LUNG IMPULSE 2 SNORKEL7337-60

The Mako is a high performance personal dive vehicle

utilizing the latest in motor and battery technologies to

deliver startling speed and run time statistics, extending

dive time and range. It’s a whole lot of fun as well

• Up to 2-hour run time

• Variable pitch propeller

• Conserves air by virtually eliminating exertion

• Green, yellow and red LED battery indicator

• Includes battery and charger

OCEANIC MAKO DIVER PROPULSION VEHICLE MAKO-DPV

• New Aqua Lung exclusive Hands-Free Fin Release Strap for quick removal with a

kick of your heel

• Significantly outperforms traditional composite fins

• Produces maximum thrust and lateral stability

• Combination of polymer plastic for stability with rubber for flexibility

• Quick-release, quick adjusting buckles.

AQUA LUNG BLADES 26268-90

Black - HF

6268-80 Small

6268-90 Regular

6269-00 Giant

• Light weight rubber compound

• Neutrally buoyant

• Larger foot pockets

• Extended foot pocket provides better leverage

• Two molded reinforced holes for tethering options

• Replaceable heavy duty stainless steel buckles

AQUA LUNG ROCKET FINSEE BELOW

6211-00 Rocket Fin, Original Metal Buckles

6211-10 Rocket Fin, Quick Release Plastic Buckles

6216-10 Super Rocket, Quick Release Plastic Buckles

6211-30 Rocket Fin II, Original Metal Buckles

Spares

6211-31 Metal Buckle Kit for Rocket II

6211-32 Rocket II Replacement Strap

FinsAqua Lung

FinsA

qu

a L

un

g

168



UNDERWATER KINETICS MINI Q40 DIVE LIGHTSEE BELOW

The high intensity Mini Q40 eLED is lightweight enough

to attach to your mask strap for hands free illumination of

gauges and marine life.

• Works well as a photographers spotting light. Fits

Sea & Sea, Ultralight and other camera mounting

adapters

• Tough, non-corroding ABS and polycarbonate

plastic construction.

Part Numbers

UWK-14512 Mini Q40 (Clam Pk) Yellow

UWK-14515 Mini Q40 (Clam Pk) Black

UNDERWATER KINETICS LIGHT CANNON 100UWK-44601

Utilizing the latest HID lighting technology, the Light

Cannon emits a beam of light as white as the Sun

and penetrates water farther than any conventional

halogen or xenon dive light.

• New miniature HID lamp gives a giant leap in

brightness with no increase in battery usage

• High color temperature gives the beam the same

color as sunlight

Specifications

Power 10 watts

Lamp HID Metal Halide (6000 degrees K)

Luminous Flux450 lumens

Burn Time 3-4 hours (alkaline batteries) 2 hours (UK NiCad Pack)

Battery 8 x Alkaline C-cell, NiMH or Nicad Cells, UK NiCad Pack

Size 3.2 inch diameter x 8.2 inch

Weight 44 oz.

Specifications

Power 2.1 watts (38 Lm average)

Lamp High brightness xenon filled

Burn Time 4-5 hours

Battery 4 x alkaline AA-cells

Size 6.1 x 1.6 x 1.4 inch

This outdoor and marine survival light is designed to

be a real lifesaver. It operates on a single AA battery &

floats head up in water. Clipped to your body or gear, the

AQUA STROBE is sure to get the attention of emergency

services throughout the world. AQUA STROBE Includes:

Alkaline Battery, Velcro Strap & Lanyard.

PRINCETON TEC AQUA STROBETEC-AS-10-NY-CP-USA

TEC-AS-10-BK-CP-USABlack

TEC-AS-10-NY-CP-USAYellow

TEC-AS-10-RR-CP-USARocket Red

Ideal for personal flotation device and immersion suits.

Xenon strobe provides 250,000 peak lumens. Operates

over 8 hours on standard AA batteries.

• Large sliding switch allows for easy operation by

gloved hands

• Designed as “electronic flare” to replace day/night

pyrotechnic signal in aviation life rafts

• Stainless steel retainer securely attaches removable

battery door to case

ACR MULTI-FUNCTION SEARCH AND RESCUE STROBE

I921LTE-00-NAV

Lights & StrobesS

tr

ob

es

Princeton TecP

rin

ce

ton

Te

c •

AC

R •

Un

derw

ater

Kin

etic

s



169


The SEAL Pup features a partially serrated, scratch-

resistant, powder coated blade that is extremely sharp

and durable. Its lightweight, glass-reinforced Zytel

handle contains a unique diamond pattern for a secure,

no-slip grip. The SEAL Pup can be securely carried in its

waterproof Kydex Groove™ sheath.

SOG - SEAL PUPSOG-M37

Specifications

Blade Length4.75” x .160”

Weight 5.0 oz

Overall 9”

This traditional piece of equipment manufactured to rigid

U.S. Navy specifications. It has a 7” stainless steel blade

with a clear Maple handle. The knife screws into the top

1/2” of the polished cast brass sheath using Acme threads

which not only hold it securely in the sheath but also

permit it to be easily and quickly removed. The upper

edge of the knife blade is cut with saw teeth while the

lower edge is a conventional knife edge. The belt strap is

top grain leather.

DESCO DIVERS KNIFE29228

• 7 in. serrated blade

• Stainless steel butt cap

• Plastic sheath

AQUA LUNG MASTER KNIFE4226-00

Specifications

Blade Length7.25” x .230”

Weight 12.8 oz.

Overall 12.25”

The SOG SCUBA/Demo’s 7.25 inch, AUS 8 steel blade is a

rugged .230 inches thick and is double-edged, featuring a

unique full-serration along the spine.

SOG - SCUBA/DEMOSOG-SSD89

Knives & ToolsK

niv

es

SOGA

qu

a L

un

g •

De

sc

o •

SO

G

170



COLD STEEL SRK38CK

Survival/Rescue operations demand a versatile knife able

to withstand extreme abuse. The SRK was designed with

this in mind. The 3/16 in. thick blade features a strong

clip point that’s hand honed to a superb edge that is hair

flinging sharp.

ONTARIO KNIFE MK3 NAVY KNIFEONT-6141

Includes molded high-impact plastic sheath equipped

with brass belt hanger and loop.

Specifications

Blade SteelBlack Oxide 440A Stainless Steel

Edge TypeStraight w/Sawteeth

Handle MaterialMolded High-Impact Plastic

Length Blade6 1/2 in.

Overall Length10 3/4 in.

The SOG SEAL Knife 2000 is perhaps one of the most

dramatic fixed blades on the market. The SEAL Knife

2000 can be securely carried in its waterproof Kydex

sheath.

SOG - SEAL KNIFE 2000SOG-S37

Specifications

Blade Length7” x .25”

Weight 12.8 oz

Overall 12.25”

The Tigershark’s characteristics translate into a full range

of capabilities including: aggressive cutting, superior edge

holding ability, and maximum comfort. Tigershark seeks to

offer the ultimate realization of what a large bowie can do.

SOG - TIGERSHARKSOG-S5

Specifications

Blade Length 9” x .250”

Overall 14”

Weight 17.3 oz

Knives & ToolsK

niv

es

SO

G •

On

tari

o K

nif

e •

Co

ld S

tee

lSOG



171


Specifications

Part No. Model Penetration (in.)

Max Lift (lbs.)

Tool Weight (lbs.)

Dimensions (in.)

20105 100 1/8 100 3.5 3-1/2 x 5

20125 250 1/16 250 5 5-1/4 x 5

20130 450 1/8 400 8 5-1/2 x 6

20115 600 1/8 600 10 6 x 7-3/8

Repair Kits

Part No. Description

20141 Small Handle Repair Kit* for Cub and Model 250

20142 Large handle Repair Kit* for Models 400 and 600

Replacement Parts

20102 Springs for Cub, 250 and 400

20113 Springs for Model 600

20105-4 Handle Pin (all models)

*Handle kits include handle with bushing installed and handle pin.

MAGNETIC HANDLESSEE BELOW

BROCO ® OXY-ARC CUTTING TORCH

BR-22

The BR-22 is designed to significantly

minimize electrolysis. Interchangeable

collets accommodates 3/8” or 1/4”

diameter cutting rods which also allow

the torch to be used as a welding

electrode holder.

BROCO ® BR-20WELDING STINGER

BROCO ® HIGH VOLUME OXYGEN REGULATOR

HVR-4401

The HVR-4401 is multistage and assures

smooth flow at high volume.

BR-20

The Broco Welding Stinger head

and handle are made of lightweight

high-impact thermoplastic. Accepts

a wide range of electrode diameters,

the BR-20 meets MIL-H-865D and is

approved for Navy Use (ANU).

Ordering Information

UW-CS-1 1/8” O.D. x 14” L(8 lb. tube contains 96 rods)

UW-CS-2 5/32” O.D. x 14” L(8 lb. tube contains 72 rods)

SOFTOUCH MILD STEEL WELDING ROD

SEE BELOW

For wet welding mild steel and select

low alloy steel. Meets or exceeds

AWS E70XX specifications for

underwater welding and is approved

for Navy Use (ANU).


3818UW-253/8” O.D. x 18” L (25 lb. box contains 66 rods)

3836UW-253/8” O.D. x 36” L(25 lb. box contains 31 rods)

ULTRA-THERMIC CUTTING RODSEE BELOW

Cuts ferrous or nonferrous metals,

concrete, or rock. Readily ignited

underwater, the rod will continue to

burn without power until the oxygen

supply is turned off. Works with any

cutting torch.


UW-EZ-1 1/8” O.D. x 14” L (8 lb. tube contains 96 rods)

UW-EZ-2 5/32” O.D. x 14” L (8 lb. tube contains 72 rods)

High deposition, all position,

electrode is easy to light, easy to run

(a controllable puddle with rippled

bead appearance) and easy to clean.

Meets AWS D.3.6 for underwater

welding Type “B” welds.

EASYTOUCH WET WELDINGSEE BELOW

BROCO ® UNDERWATER CUTTING & WET WELDING ELECTRODES

Knives & ToolsTools

BrocoB

ear Paw • B

roco

172



The Amcom I is a small compact one diver radio packed with 22

watts of audio power and many versatile features to give you

many years of service. The Amcom I is available in a rechargeable

version (2810A) complete with the new and improved Amron

2823-602 External Charger with Gel-cell battery or a non-

rechargeable version (2810A-1) with standard lantern type

batteries. Small enough to fit in your gear bag and priced to

fit your budget. No diver should be without an Amcom I for back-

up or primary communications!

• Available in rechargeable & non-rechargeable models

• LED battery indicator

• Enough audio power to support two divers

• Molded co-polymer case with O-ring seal for protection

• External 12VDC power connection

• Independent diver and tender controls

• All connections on side of case for remote operation with lid

closed

• Black powder coated panel with easy to read white graphics

• Flip-latch battery compartment with O-ring seal

• 2 and/or 4 wire operation standard

• Tape Record Jack is standard

2810A REAR VIEW

Specifications

Power 12VDC

Audio Power Output 22 Watts per channel

Frequency Response 300Hz to 12kHz

Weight 2810 7 lbs.

Weight 2810-111 lbs.

Dimensions 6.75” H x 8.625” W x 6.25” D

Power Options

Non-rechargeable (2810A-1)

2 ea. 6VDC screw-top dry cell batteries configured to 12VDC.Expected life: 30 hours

Rechargeable(2810A)

1 ea. 12VDC slide terminal Gel-cell battery Expected life: 50 hours

2810A FRONT VIEW

2810A PANEL VIEW

Non-Rechargeable (2810A-1)

Shipped ready to use with two 6-volt dry cell screw top batteries and manual.

Rechargeable (2810A)

Shipped ready to use with a 12VDC rechargeable Gel-cell battery, external charger and manual. The unit can be left on charge indefinitely without damage zto the batteries or communicator. The communicator can be operated directly from the charger where AC power is available.

2810A-1 Amcom I w/ non-rechargeable batteries

2810A Amcom I w/ rechargeable batteries

Accessories

2460-28 Amron Headset w/ Dual Banana Plugs

2401-28 Heavy Duty Headset w/ Dual Banana Plugs

2405-28 Hand-held Push-to-Talk Microphone

2821-28 Push-to-Talk Module w/ 25 ft. cable 2 wire mode

2822-28 Walk-and-Talk Module w/ 25 ft. cable 4 wire mode

2890- 05 Rechargeable Battery for 2810A (1 required)

2890- 01 Lantern Battery for 2810A-1 (2 required)

2810A- FS Field Spares Kit

AMRON MODEL 2810A AMCOM 1-DIVER RADIO2810A

CommunicationsR

ad

ios

Amron

Am

ron



173


The Amcom™ III has all of the same features of our Amcom II series

communicators. These superior radios utilize separate volume

controls for each diver and the tender, both, for the uplink and

down-link paths.

• New weatherproof panel microphone for great voice

intelligibility

• Available in AC power with automatic battery back-up

• LED battery indicator

• Enough audio power to support three divers

• External 12VDC power connection

• Independent diver and tender controls

• Hand-held push-to-talk microphone

• Remote Walk-and-Talk belt module (optional)

• Tape Record Jack

• 2 and/or 4 wire operation standard

• Ability to use both dynamic and pre-amplified diver

microphones with a unique circuit that detects microphone

type and automatically adjusts volume levels

2830A/24 Amcom 3-Diver Radio, AC Powered

2830A/24/28FDW 2830A w/ Wireless Tender

2830A/24/26 2830A w/ Analog Helium Speech Unscrambler

2830A/24-MS 2830A - Military- w/ MS Connectors

2830A/24/28FDW-MS2830A w/ Wireless Tender - Military - w/ MS Connectors

2830A/24/26-MS 2830A Helium UnscramblerMilitary - w/ MS Connectors

Accessories

2460-28 Amron Headset w/ Dual Banana Plugs

2829-01 Remote Wireless Kit w/ Case, RemoteTransceiver, Headset & Charger

2821-28 Push-to-Talk Module w/ 25 ft. cable (2-Wire Mode)

2822-28 Walk-and-Talk Module w/ 25 ft. cable (4-Wire Mode)

2405-28 Replacement Hand-held Push-to-Talk Microphone

2890-05 Replacement battery (1 required)

28XXA-FS Field Spares Kit

2830A/24 3-DIVER RADIO W/ AC POWER OPTION

Specifications

Power 110/220 VAC 50/60 Hz (automatic), or internal/external batteries 12 VDC

Audio Power Output22 Watts per channel

Frequency Response300Hz to 12kHz

Isolation TransformerSplit Bobbin

Backup Battery12VDC, Slide terminal Gel-cell (1 ea.)

Expected Battery Life20 hours

Height 9 in (22.9 cm.)

Width 14.5 in (36.8 cm.)

Depth 10.0 in (25.4 cm.)

Weight (approx.)22 lbs. (9.98 kg)

2830A/24/26 3-DIVER RADIO WITH HELIUM UNSCRAMBLER

2830A/24/28FDW-MS 3-DIVER RADIO, MILITARY MODEL

AC Power

With automatic battery backup power. Rechargeable Gel-cell type battery automatically recharges while operating the unit. The voltage is automatically selectable for 110 or 220VAC, 50 or 60Hz, with built-in isolation transformer. Shipped complete with backup batteries and manual.

AMCOM 3-DIVER PORTABLE RADIOS2830A

CommunicationsR

adiosAmron

Am

ron

174



The Aquacom® SSB-2010 diver transceiver is a 5 watt,

multi-channel single sideband underwater telephone

designed with the Professional Search & Rescue Teams

in mind. The SSB-2010 can be configured to operate with

virtually any style full face mask (ffm) or mouth mask. With

the addition of a CDK-6 Surface Accessory Kit, the SSB-

2010 is easily converted into a portable surface station.

Standard features are: Voice Operated Transmission (VOX),

Push-to-talk control (PTT ), Squelch, 4 channels, Earphone

volumes, Voice menu (the user can easily adjust the SSB-

2010 underwater), removable transducer, and heavy duty

design. This system is tough, powerful and a must for any

serious Search & Rescue Team.

OTS AQUACOM® SSB-2010 TRANSCEIVEROTS-900272-000

Specifications

Nominal RangeCalm sea: Greater than 1,000 meters

Transmitter Band 31 to 33 kHz

Audio Frequency Response

300-4,000 Hz

Receiver Sensitivity -110 dBv

Acoustic Output Power 3 watt (PEP) (176.4 dB re 1 uPA at one meter

Auto. Gain Control (AGC)

120 dB dynamic range

TransducerPiezoelectric type

Transmitter Activation Voice operated transmitter (VOX) or manual activation (PTT)

Battery Type 8-AA Alkaline cells or opt. RB-10A NickelCad pack or NiMH

Battery Life 12 hrs. on AA Alkaline, 10% duty cycle, 6hrs Nicad, 13 hrs. Metal Hydride

Low Battery Indicator Flashing Red LED on upper housing (also indicates power is ON)

Housing DimensionsHeight: 7.60” , Width: 3.55” , Depth: 1.80”

Channels

1 = 32.768 kHz upper sideband

2 = 32.768 kHz lower

sideband

3 = 31.250 kHz upper sideband

4 = 31.250 kHz lower sideband

Compatibility Chart

XT-100 RX-100 SSB-1001B EMA-2

XT-100-H SP-100 CDK-6 Kit EMX-2B

SCU-BUD/S OR-BUD/S STX-101/M EMX-2

TEC-BUD SSB-2001BMTS-BUD/S RCL-7A

The CDK-6 Surface Accessory Kit is designed to convert

an SSB-2010, SSB-2001B, or SSB-1001B into a portable

surface station. The kit consists of one deluxe headset

with boom microphone (OTS-910019-007) and a 55’

transducer cable (OTS-910017-000) including connectors.

The CDK-6 is perfect for fast response and when space is

an issue. Many Team Leaders utilize the CDK-6 in small

craft operations.

OTS CDK-6 SURFACE ACCESSORY KITOTS-900015-007

CDK-6 Surface Accessory Kit (900015-007) Specifications:

Microphone Noise canceling, 150 ohm. (boom mic on headset)

Frequency Range 30 to 35 kHz

Cable 55 ft with male & female amp connectors

Earphone Dual earphone headset with boom mic

Push-to-Talk (PTT)

Installed on one side of the earphone muff

CDK-6 Compatibility Chart

SSB-2010

SSB-2001B

SSB-1001B

CommunicationsT

ra

ns

ce

ive

rs

Oc

ea

n T

ec

hn

olo

gy

Sy

ste

ms

OTS



175


Nominal Range100 yards voice, 300 yards tone

Frequency Range 500 - 4,000 Hz

Input Current/Voltage 7 amps max / 24 VDC

Audio Power Recall & Tone 132 Watts, Voice, adjustable upto 132 Watts

Idle Current275 Ma

Microphone Handheld, PTT

TransducerLubell (anodized aluminum)

Battery Life5 hours at 20% duty cycle (recall/tone) 3hours with aux. input

Battery Type(2) 12 volt 2.6 amp hours (RB-30)

Low Battery AlarmLED flashes at ~20 volts

Housing Dimensions6.5” H × 14” W × 10.6” D, Weight 15 lbs.

10-watt, 8-channel single sideband surface underwater

telephone designed for Military and Government use.

The dive supervisor will have total communication

control with all free swimming scuba divers that are

equipped with SSB-1001B Diver transceivers. U.S. Navy

Approved.

OTS AQUACOM® STX-101M TRANSCEIVEROTS-900281-001

Specifications

Nominal RangeCalm seas: Greater than 1,500 meters.Sea State 6: 200 meters

Frequency Range30 to 35 kHz

Audio Bandwidth300 Hz to 3,500 Hz

Automatic Gain Control 120 dB dynamic range (AGC)

Acoustic Output Power 10 watts (nominal)

Microphone/Speaker Hand Held , dynamic, 200 ohm./Heavy duty front panel speaker with On/Off control

TransducerPiezoelectric type on a 55’ cable

External Power12 volt, DC @minimum of 4 amps

Battery Type & Life Supplied with (2) RB06V rechargeable batteries. 20 hours continuous use assuming 10% duty cycle

Squelch User adjustable from the front panel

Receiver Sensitivity Greater than 100 dBv

Housing Dimensions D: 10.60”, W: 14.00”, H: 6.500”, Weight: 12.5 lbs. w/batt. Housing U/K 603

STX-101 Channels (Single Sideband)

1 = 32.768 kHz upper

2 = 32.768 kHz lower

3 = 31.250 = kHz upper

4 = 31.250 = kHz lower

Compatibility Chart

XT-100 Buddy Phone® RX-100 Buddy Phone®

XT-100-H Buddy Phone® TEC-BUD Buddy Phone®

SCU-BUD/S Buddy Phone® SP-100D Buddy Phone® Digital

MKII-BUD/S Buddy Phone® STX-101 Aquacom®

SSB-1001B Aquacom® SSB-2010 Aquacom®

RCL-7A Multi Battery Charger STX-100 Buddy Phone®

SSB-2000/1 Aquacom® SSB-1000D Aquacom®

SSB-1000S Aquacom®

The system comes complete with a high-quality hand-held

microphone, transducer with 25’ of cable, rechargeable

batteries, battery charger and main electronic unit. The

DRS-100B is a must of all diving operations!

The DRS-100B Diver Recall/Hydrophone system is U.S.

Navy approved and used by Special Warfare units around

the world. The DRS-100B is a dive supervisor’s best friend,

allowing him to recall free-swimming divers. It will alert all

divers within range with either voice, solid or intermittent

tones. The DRS-100B also offers a listening mode which is

great to hear marine biological

and/or man-made noise.

OT S DRS-100B DIVER RECALL/ HYDROPHONE

OTS-900097-000

CommunicationsR

ad

ios

Oc

ea

n T

ec

hn

olo

gy

Sy

ste

ms

OTS

Maritime2

Documents

Transcript of Maritime2