Marine Pumps and Equipment
-
Upload
mavericksailor -
Category
Documents
-
view
245 -
download
0
Transcript of Marine Pumps and Equipment
-
8/13/2019 Marine Pumps and Equipment
1/34
VN - Pumpen
1
3
Marine pumps and equipment
Cargo screw pump electric driven with gastight bulkhead gland
-
8/13/2019 Marine Pumps and Equipment
2/34
VN - Pumpen
2
3
Marine pumps and equipment
Marine pumps and equipment
Power transmission systems with gastight bulkhead and/or deck glands between engine rooms andpump rooms
The shaf t t ransmissions with ga stight bulkhea ds a nd/or de ck glan ds ha ve been developed for sma ll
a nd me dium size ta nkers fo r the po w er tran smission from d riving eng ines in the eng ine-room t o carg o
pumps in the pump room. A suitably designed flange with centering ring enables the mounting of
the tra nsmission on the deck or bulkhea d. The sha ft of th e ga stigh t bulkhea d gla nd is eq uipped with
tw o g rease lubrica ted roller bea ring s (a t ea ch side one be a ring ) a nd sealed by mea ns of an o il reser-
voir, which is mounted approx. 0,50 0,75 m above the shaft centreline. Other kinds of special seals
such as ra dial seal ring s and single or d oub le mechanica l sea ls, can be delivered on reque st. The t rans-
mission w ith ga stigh t g lands a re design ed a ccording to the latest rules of the cla ssif ication societies
a nd can be de livered w ith t ype -te st certif icat es fro m ABS, BV, DNV, GL, L.R.o.S. a nd R.I.N.A.
Driving arrangements for cargo pumps (mainly for smaller tankers)
- Electric motor or diesel engine as prime mover for cargo pump
Norma lly a f lexible coupling w ill be installed bet w een the electric mot or (or diesel eng ine) a nd
the t ransmission sha ft a nd a f lexible coupling w ill be insta lled be tw een the t ransmission shaft
a nd t he carg o pump. The lengt h piece of the spa cer coupling, if req uired, ena bles a n ea sy disma nt-
ling o f the cargo pump, moto r or gast ight bulkhead gland, i f the bea rings have to b e renewed (see
sketch).
1) screw pump
2) f lexib le co upling
3) g a st ig ht b ulkhea d g la nd
4) o il reservo ir
5) f lexib le co upling
6) elect ric mo t o r
7) b ulkhea d
Pump Ro o m Eng ine Ro o m
-
8/13/2019 Marine Pumps and Equipment
3/34
VN - Pumpen
3
3
Marine pumps and equipment
Power transmission systems with gastight bulkhead and/or deck glands between engine rooms andpump rooms
- Diesel engine as prime mover for cargo pump and generator
If a diesel eng ine is provided a s driver, w hich will a lso be used f or g ene rat or-drive and /or
a s ma in pow er source, then a highly ela stic coupling w ith a clutch ha s to b e insta lled b etw een
diesel engine a nd g a stigh t b ulkhea d g land (see sketch).
The combina tion of a highly ela stic coupling w ith a ma nua lly or pneuma tica lly opera ted
clutch ensures rela tively short mount ing lengt hs and w ill be preferred especially on sma ll
ta nkers. A spacer type flexible coupling w ill be recommende d f or the insta lla tion b etw eenga st ight bulkhead gland and cargo-pump in t his arrang ement t oo . The system arrang ement
from d iesel engine pow er ta ke-off to t he cargo pump driving shaft w ill be selected b y us
a nd a t orsional vibration calculation w ill be carried out t o ensure the proper operat ion of
the selected system compo nent s.
1) cent rifug a l pump 6) clut ch
2) f lexib le spa cer-co upling 7) d iesel eng ine
3) o il reservo ir 8) f lexib le co upling
4) g a st ig ht b ulkhea d g la nd 9) g enera t o r5) g ea r b o x 10) b ulkhea d
The comp lete syste m can b e de livered w ith a certifica te o f a cla ssifica tion society.
In cases w here a speed reduction or a speed increase is necessa ry, a reduction ge a r or a speed-
up g ea r w ill be delivered.
Pow er transmission systems w ith ga stight bulkhea d g lands are a vaila ble for pump capa cities
up t o 1000 m 3/h a t 10 ba r. Shaf t tra nsmission to rq ues up to 5500 N/m la rge r t ran smissionscan be d elivered o n req uest.
If you submit yo ur pump t ransmission prob lems, w e w ill prepare a complete tra nsmission
proposal to you with alternative solutions.
Pump Ro o m Eng ine Ro o m
Marine pumps and equipment
-
8/13/2019 Marine Pumps and Equipment
4/34
VN - Pumpen
4
3
Marine pumps and equipment
Combined units
Electrically driven cooling water andballast pumps with clutches
Marine diesel engine with generatorand self priming fire extinguishingpump, with clutch
Marine diesel engine with highpressure compressor and cargoscrew pump with clutch
-
8/13/2019 Marine Pumps and Equipment
5/34
VN - Pumpen
5
3
Combined units
Marine diesel engine withgenerator and hydraulic powerpackage
Marine diesel engine with generatorand general service pump with clutch
Marine diesel engine with generatorand fire extinguishing pump with clutch
Marine pumps and equipment
-
8/13/2019 Marine Pumps and Equipment
6/34
VN - Pumpen
6
3
Marine pumps and equipment
Centrifugal pump with spacer coupling
vertica l, non -selfpriming, sing le sta g e, in-line.
Throug h usag e of spa cer coupling th e complete bea ring
unit including impeller can b e dismant led w itho ut remo ving
casing and moto r.
Application:Cooling w at er pump
Circulating pump
General service pump*
Fire exting uishing pump*
(*flooded)
Q = 10 - 800 m3/h
H = 10 - 95 m
Centrifugal pump short version
vertica l, non -selfpriming, sing le sta g e, in-line
The impeller can b e d isma ntled w ithout removing
piping a nd casing .
Application:Cooling w at er pump
Circulating pumpGeneral service pump*
Fire exting uishing pump*
(*flooded)
Q = 10 - 250 m3/h
H = 10 - 95 m
Selfpriming centrifugal pump as ballast-, bilge-, fire extinguishing- and general service pumpwith evacuating device as described on pages 8 + 9
Vertical centrifugal pumps
-
8/13/2019 Marine Pumps and Equipment
7/34
VN - Pumpen
7
3
Marine pumps and equipment
Axial splitted ballast pump with selfpriming
device and gastight deck gland with cardanshaft
Vertical with lower axial inlet and radial outlet
Marine pumps and equipment
Marine centrifug a l pumps a s
cooling water-pumps
bilge-pumps
ballast-pumps
g ene ral service-pumps
fire extinguishing pumps
(evacuat ing d evices see pa ge s 8 + 9)
-
8/13/2019 Marine Pumps and Equipment
8/34
VN - Pumpen
8
3
Marine pumps and equipment
Typ
eAELG
Typ
eASVA/B
Priming Systems for Marine Pumps
Examp les fro m o ur Scope o f Supply
TypeAELD
TypeASGB
w it h Pre ssu re Air Eje ct o rs w it h Liq u id Rin g Va cu um Pu mp s
The priming system o f a centrifug a l pump is a n independe nt compo nent pa rt of t he to ta l pumping
system a rrang ement . Besides the size o f t he pum p it is a lso critical to the selection o f t he suita ble
system whether the pump mainly has to be evacuated before starting (e.g. pumps working from sea
w at er tank) or w hether during a nd a t t he end o f the pump operat ion air/ga s has to b e discharged
from t he system (e.g. b ilge , ba llst or carg o pum ps)
TypeAELC
TypeASGL
Centrifuga l pumps tha t ma inly have to be evacuated befo re sta rt ing ma y be eq uipped w ith a t ta ched
pressure cont rolled priming syste ms.
Example: pumps w orking from the sea w at er ta nk.
Pumping systems that have to be primed a lso d uring operat ion ma y be eq uipped depending o n the
volume of a ir inta ke w ith pressure cont rol priming systems. These a re insta lled o n th e suction line in
front of t he pump.Example: sma ller bilge a nd ba lla st pumps.
Pumping systems where larger amount s of g as volume have to be evacuated during pump operat ion
requires level cont rolled priming systems. These ha ve to be insta lled in front of the centrifug a l pump to o.
Example: la rger bilge a nd b allast pumps
-
8/13/2019 Marine Pumps and Equipment
9/34
VN - Pumpen
9
3
Marine pumps and equipment
TypeAELH
TypeASVS
TypeAELZ
TypeTDV
Pumping systems where large amounts of gas volumes have to be evacuated during and especially at
the end of pump operation are to be equipped with level controlled priming systems which enable
efficient sepa rat ion of g a s from t he discharge liquid
Example: la rger bilge an d b a llast pumps or ca rgo pumps with stripping function.
Centra l va cuum system ena bles the connection o f severa l centrifuga l pumps. Ea ch linked centrifug a l
pump is eq uipped w ith a pressure level cont rolled g a s discha rge va lve w hich w ill be selected b a sed o n
the a bove mentioned req uirements.
TypeGAE
TypeGAC
TypeSLE
Priming Systems for Marine Pumps
-
8/13/2019 Marine Pumps and Equipment
10/34
VN - Pumpen
10
3
Marine pumps and equipment
Horizontal centrifugal pumps:
Centrifugal pump, non-selfpriming
horizontal, single stage, acc. to DIN 24255w ith flexible coupling on comm on b a se
plate or a s bloc-pump f or vertica l bulkhea d
mounting
Application: Cooling w at er pumpAir conditioning pump
Circulating pump
Fire exting uishing pump
Q = 5 - 500 m3/h
H = 10 - 130 m
Centrifugal pump, selfpriming
horizonta l , single stag e w ith f lexible couplingon commo n ba se pla te o r as bloc-pump
Application: Ballast pum pBilge pump
Fire exting uishing pump
General service pump
Q = 2 - 250 m3/h
H = 7 - 80 m
Side channel pump, selfpriminghorizonta l , single- or multista ge, o val f lang es
with f lexible coupling and mounting brackets
Application: Hydropho re pumpCondensate pump
Cooling w at er pump
Q = 0,5 - 7 m 3/h
H = 15 - 80 m
Side channel pump, selfpriminghorizonta l , single- or multista ge, round flang es
w ith f lexible coupling on commo n ba se plate
Application: Hydropho re pumpCondensate pump
Cooling w at er pump
Q = 0,5 - 30 m3/h
H = 15 - 150 m
Centrifugal pump selfpriminghorizonta l, single sta ge, w ith ma nual
clutch fo r direct o r V-be lt d rive
Q = 0,5 - 50 m3/h
H = 5 - 50 m
-
8/13/2019 Marine Pumps and Equipment
11/34
VN - Pumpen
11
3
Marine pumps and equipment
Condensate pumps:
Centrifugal pumphorizonta l , single stag e, no n-selfpriming w ith
mechanical sea l
Application: Exhau st g a s boiler circula ting
pump
Q = 3 - 50 m3/h
H = 1 - 8 ba r + inlet pressure
T= up to 200 C (w ithout e xternal coo ling
up to + 185 C)
Centrifugal pumphorizonta l or vertica l , multista ge ,
non-selfpriming
Application: Boiler feed
w ater pump
Q = 1 - 80 m3/h
H = 8 - 30 ba r
Reciprocating piston pumpvertical, duplex, double acting, selfpriming
Application: Bilge- a nd Balla st pump
Stripping pumpQ = 5 - 200 m3/h
H = 20 - 80 m
Piston pumphorizonta l , w ith gea r, doub le acting, selfpriming
Application: Bilge pump
(can b e de livered w ith ba ll val-ves a s Sludge pump fo r dirty
a nd slight ly viscous liquids)
Q = 0,5 - 30 m3/h
H = 15 - 60 m
Reciprocating pumps:
-
8/13/2019 Marine Pumps and Equipment
12/34
VN - Pumpen
12
3
Marine pumps and equipment
Positive displacement pumps:
Screw pumpvertical or horizontal 3-spindle, internal
be a ring s, selfpriming, w ith bu ilt-in relief
valve
Application: HFO or MDO t ra nsferpump
Lub oil transfer pump
Lub oil pump
Oil service pum p
Hydrau lic pump
Cargo pump
Fuel oil boo ster pump
Q = 0,5 - 400 m3/h
H = 0,5 - 16 ba r
Screw pumpvertica l or ho rizo nt a l 2-spind le w ith
external bearings, twin-geared
Application: Cargo- and Strippingpump for :
Prod ucts, crude oil, che-
micals, highly viscous
liquids i.e. Molasses,
Asphal t e tc . , and w at er
Q = 10 - 1500 m3/h
H = 2 - 25 ba r
Gear pumpvertical or horizonta l , interna l bea ring s,
selfpriming, w ith b uilt-in relief valve
Application: HFO or MDO t ran sferpump, Lub oil transfer
pump, Lub o il pump,
Oil service pum p,
Hydraulic pump, Cargo
pump, Fuel oil booster
pump
Q = 0,1 - 250 m3/hH = up to 16 ba r (bigger pump, w ith
external be a ring s, up to 1200 m 3/h
can be used a s cargo pumps)
-
8/13/2019 Marine Pumps and Equipment
13/34
VN - Pumpen
13
3
Marine pumps and equipment
Excentric helical rotor pump
horizonta l or vertica l , selfpriming, Sta to rand Rotor (wearing parts) are replaceable
Application: Sludge p umpBilge pump
a nd for highly viscous
liquids
Q = 0,1 - 600 m3/h
H = up t o ma x. 40 bar
Ca n b e d elivered w ith dry-running
protection w hich continuously monito rthe temperat ure in the sta tor and
stop the pump when reaching the limit
temperature .
Centrifugal pumpsingle stage, vertical for dry- or
wet installation, dryrunning-
proof. Ha ndling of l iq uids
w ith a dm ixt ures/solids up
to t he size of d ischarge
socket.
Application: Sew ag e and Bi lge .Also for process
deck of f ish-tra w lers
Q = corresponding t o size of solids
(i.e. 150 mm = ap prox. 250 m 3/h, 950 1/min)
H = a pprox. 4 m
Q = 10 - 500 m3/h
H = 2 - 40 m
Sewage pumps:
Centrifugal sewage pumphorizonta l or vertica l , sing le sta ge ,
on e-cha nne l or open impeller,automatic cutting device, non-
selfpriming.
Q = 5 - 150 m3/h
H = 3 - 60 m
Also available as submersible design as
bilge pump. Ma terial cast iron, a lumini-
um, bronze, stainless steel
Application: Bilg e /sew a g e/fe ca lpump
Q = 5 - 200 m3/h
H = 1 - 40 m
Positive displacement pumps:
-
8/13/2019 Marine Pumps and Equipment
14/34
VN - Pumpen
14
3
Marine pumps and equipment
Compact unit consisting of:
Hydrophore, Filter, Sterilization and Calorifer
Rang e of component s assembled a cc. to your requirements, piped a nd w ired ready f or operat ion
on common base f rame.
Hydrophore pumps: 1 or 2 pisto n- or self-priming centrifug a l pumps (1)
Pressure Vessel: ga lva nized steel or inside coa ted , or with copper inside or mad e of
sta inless stee l (2)
Armatures: bra ss, bronze , cast iron or rubb erized
Piping: g a lva nized ste el, copp er, sta inless steel or PVC
Filter: multiple layer drinking w at er treat ment f i lter w ith act ivat ed dolomite
a nd hyd ro-an thra cite (3)
UV-dosages: ultra-violet disinfection of w a ter (4)
Calorifer: ga lva nized steel or inside coa ted , or with copper inside or mad e of
sta inless stee l (5)
Heating: w ith electric hea ting f lang e a nd/or w ith steam hea ting coil (6).Accessories for heating steam regulating, circulating pump (7)
etc. Insula tion w ill be included a uto ma tica lly.
-
8/13/2019 Marine Pumps and Equipment
15/34
VN - Pumpen
15
3
Marine pumps and equipment
Compact units consisting of hydrophore, filter, sterilization and calorifer
Hydrophore compact units
-
8/13/2019 Marine Pumps and Equipment
16/34
VN - Pumpen
16
3
Marine pumps and equipment
Pipin
gdiagram
ofacompactunit
consistingofhydrophore,
filter,
sterilizationandcalorifer
Hydrophore compact units
-
8/13/2019 Marine Pumps and Equipment
17/34
VN - Pumpen
17
3
Marine pumps and equipment
Compact units consisting of hydrophore, filter, sterilization and calorifer
Hydrophore compact units
-
8/13/2019 Marine Pumps and Equipment
18/34
VN - Pumpen
18
3
Marine pumps and equipment
UV-Disinfection:
Features and advantages of UV-sterilizing plants:
- Ultraviolet rays destroy all harmful germs immediately.
- No chemicals or othe r substa nces a re ad ded to the
water .
- Neither the chemical compo sition nor t he t aste or
smell of the water is altered by UV treatment.
- UV disinf ection, b y its na ture, p resents no risk of
over-dosage.
- UV units operat e o n a very low current consumption.
Running costs and maintenance requirements arenegligible.
The standard units for the capacities 3 m3/h, 5m3/h and
9 m3/h distinguish themselves by:
- Compact shape - little space needed
- Fully preassembled a nd read y w ired fo r instan t
switch-on
- Ra diat ion cham ber o f steel pipe 1.4571 ma terial
(eq ua ls V4A, AISI 316)
- Perfected high intensity UV-rad iato r w ith
gua rant eed service life
- Novel quick service a q ua ja cket sealing - easy to
handle for inspection - no fracture risk
- UV-mo nito ring system w ith p re-a larm
- Ea sy, single wa ll mount ing of sw itchbo a rd a nd
chamb er, no fixing d evices need ed
Fields of application:
- commun ities
- industrial plan ts
- on b oa rd of sea go ing vessels
- ho usehold
- sanito ry secto r deep w ells
- a ircond itioning /a ir wa sher secto r
- w at er treat ment plant s
- service w a te r disinfection
(rain w a te r ciste rns, et c.)
Flow control valve (optional)
Solenoid valve (optional)
UV-sterilization plant available for higher capacity
-
8/13/2019 Marine Pumps and Equipment
19/34
VN - Pumpen
19
3
Marine pumps and equipment
Multiple drinking water treatment filter
The a g gressive carbo nic a cid cont a ined in t he d istillate reacts on f iltering w ith a ctivate d d olomite t o
calcium- a nd m a gn esium bicarbon a te. The pure w a ter is only delivered w ith substa nces tha t a re accep-
ted in a ccorda nce with t he Regulat ions abo ut t he Addit ion of External Substances on preparing of
Drinking Wat er (Drinking Wat er Trea tm ent Reg ulat ion) issued on Decemb er 19, 1959 a nd in accor-
da nce w ith D IN 2000 a nd DIN 2001.
On applying a ctivat ed d olomite for th e rehard ing of t he distillate t he ha rdness increases by a pprox.
1 dH/10 g ca rbonic a cid b ound off . In orde r to ma ke up a w orking cost calculat ion, it can be estima-
ted w ith sufficient accura cy tha t by using of 10 g ca rbonic a cid bo und o ff , a pprox. 13 g o f a ctivat ed
do lomite ma terial w ill be consumed. The reha rdening come s up to a pprox. 2 - 3 dH. The consumpti-
on o f a ctivat ed d olom ite ma te ria l w ill be a pprox. 50 - 70 g /t d istilla te . The o pera ting time is a pprox.
1000 h unt il refilling is need ed .
As a ctivat ed d olomitic ma terial acts sensitively w hen in cont a ct w ith iron a nd ma ng a nese compo unds,
there is a layer of hydro-a nthra cite included to ma intain its dea cidizing function. In pa rallel , hydro
a nthra cite is a lso used to improve the ta ste o f t he drinking w a ter, a s distilled w a ter is l ikely to h a ve a
rot ten taste .
A Reha rd ening
Filter
B Inlet No zzle 1
C Out let No zzle 1
D Sig ht G la ss
E Fillin g Ho le 80 x
120 mm
F Discha rg e Fla ng e
DN 125
G Sa fet y Va lve
(3.5 bar)
H Pressure G aug e
I Aut oma tic Vent
Valve
1 Fro m F.W.
Genera tor
2 Po t a ble Wa ter
3 Bypa ss4 Ba ckw a shing
5 Dra in
6 Bo ile r Fe ed Wa t er
Filling:
Activat ed Dolomite
Hydro Anth racite
Valve Position
Va lve 1 1 2 3 4 5 6 7
Opera t io n x x x Ba ckw a sh x x x
Bypa ss x x
Dra in x
Bo iler Feed x x
-
8/13/2019 Marine Pumps and Equipment
20/34
VN - Pumpen
20
3
Marine pumps and equipment
Waterworks with piston pump
closed wellopen well
-
8/13/2019 Marine Pumps and Equipment
21/34
VN - Pumpen
21
3
Marine pumps and equipment
Waterworks with selfpriming centrifugal pump
Can be delivered a s compa ct
level indicator
-
8/13/2019 Marine Pumps and Equipment
22/34
VN - Pumpen
22
3
Marine pumps and equipment
Working air compressors
Oilfree compressorsEmergency compressors
-
8/13/2019 Marine Pumps and Equipment
23/34
VN - Pumpen
23
3
Marine pumps and equipment
Vacuum compact unit for a painting vessel
Bilge pump unit DC-motor and starter Special sewage pumps with vortex-impeller forbig solids
Miscellaneous
-
8/13/2019 Marine Pumps and Equipment
24/34
Cargo pump installation
HYDRAULIC POWER-PACK:
Hydraulic power-pack, consisting of electrically-driven pressure-controlled hydraulic pumps,fullflow high- and low pressure filters, oil cooler,fi l l ing unit a nd control unit.
CONTROL UNIT:
Can be delivered either with:
- t r a d i t io na l d i rec t co nt ro l w i th p il o t l ines ,gauges etc.
- e l ect r i ca l ly -o p era ted p ro p o r t io na l va l ves
- I QAN co nt ro ll ed integra ted co mp u ter sy s tem
The complete system is made o f standa rdizedcomponents (hydraulic components) which areavailable from stock worldwide. Also technicalsupport is available via the Parker-Denisonorganization.
VN - Pumpenrine pumps and equipment
25
How the system works:St an dard operat ion w il l t ake p lace f rom t h e con t ro l room
Current sett ing and feedback signal are visual on control panel
The speed from the cargo pum p can be manua lly reduced locally
Deepwell cargo pump, consisting of pumpend withhigh-eff iency impeller, PTFE seals and pum phousing .Hydraulic motor is protected by means o f a shellwith cofferdam w ith sealleakage system, preventinghydraulic oil from getting into cont act with cargobeing pumped. Pipestack will be produced accordingto the required length complete with top plate anddeck trunk. Delivery will be complete w ith a suctionwell, designed for the best stripping eff iciency.Top plate will be delivered with a hydraulic controlvalve which optimises pump discharge rate depen-ding on the cargo pumps discharge pressure. Alsoany deepwell pump is equipped with an emergencystop button and hand operated valve for localcontrol and stripping.Mate rials for the cargo pumps are AISI-316 and PTFE.Capacity ran ge fro m 50 to 1100 m3/hr at ma x.pressure of 130 mlc.
HYDRAULICALLY-DRIVENDEEPWELL PUMPS:
SELFPRIMING BALLASTPUMPS:
Ballast pumps are fully submerged hydraulically-driven pumps in ballast tanks, produced in AISI-316 with bronze impellers, capacit ies up to 2000m3/hr, discharge h eads up t o 40 mlc.
VN - Pumpen
HYDRAULICALLY-DRIVENTRANSPORTABLE PUMPS:
Will be used as a transportable emergency off-loading pump, suitable to ente r standard 12 but-terworth holes.Capacities up t o 500 m3/hr, discharge p ressures upto 70mlc.Can be driven from Ships hydraulic system orwith a transportable hydraulic power-pack, elec-tric-or diesel engine driven.
26
3
VN - PumpenMarine pumps and equipment
-
8/13/2019 Marine Pumps and Equipment
25/34
VN - PumpenMarine pumps and equipment
How the Cargo pump works:
Sketch -1-
Discharg ing of cargo via discharg e piping a t a lwa ys th e ma ximum ca pa city possible,caused by using the pressure-controlled hydraulic system delivered by the
pow er-pa ck.
Sketch -2-Stripping w ill be do ne b y using a ir, nitrogen or inert ga s to pressurize t he d ischarge pipe
wi th
the pump impeller (a cting a s a check va lve) a t a low speed, cont ent s of th e discharge p ipe
w ill be d ischarged via the stripping line.
Sketch -3-Rema ins of suction w ell a nd stripping line w ill meet Solas regulat ions.
3
-
8/13/2019 Marine Pumps and Equipment
26/34
VN - Pumpen
28
Cargo pump installation
Delivery:Pre-assembled
Tested a nd set a t req uirement s
Easy to install
Installing:Central connection to pipe work
Cent ral conne ction t o po w er supply
Cent ral connection control system
Operation:Windows program
Control panel where required
BUS-system to components
Controlling:Indicators where necessary
On-line system control possible
On-line t roub le sho uting possible
Maintenance:
The syste m is set up f or ma ximum liab ility ope rat ion.Mainten a nce is reduced to a minimum.
All used components a re sta nda rd component s, this means tha t w hen a problem
occurs, spare parts can be bought locally. With the extra On-Line control, trouble-
shoo ting can be do ne on-line .
Flow control cargo pumpReturn line filterHydraulic cont rol unitElectric control bo x with digital cont rollerHydraulic pow er packAuxiliary pow er pa ck
3
-
8/13/2019 Marine Pumps and Equipment
27/34
3
VN - PumpenMarine pumps and equipment
Biological sewage treatment plants
Sewage treatment
Systems type t ested a nd a pproved in accorda nce w ith IMO Resolution MEPC. 2 (VI) by t he
relevant a utho rities. Compact skid mount ed units with all necessa ry accessories ready fo r
opera tion w ith high performa nce up to 1000 persons
Grease traps
For ga lleywa ter for removal of o il and fa t a s pretreat ment befo re the sew ag e treatment
plant
Grey water treatment
Disinfection and memb rane filtra tion for clean w a ter discha rge
Vacuum systems
For black w a ter, a nd vacuum valves fo r grey w a ter a nd urinals
29
-
8/13/2019 Marine Pumps and Equipment
28/34
VN - Pumpen
30
3
Marine pumps and equipment
Oily water separator
Oily w a te r sepa ra to r SKIT/S-DE in a ccorda nce w ith t he recen t IMO Resolut ion M EPC.107(49) con si-
sting of a combinat ion of the w ell know n o ily w a ter separa to r SKIT/S, gra vity coa lescer type a nd a
second sta ge n ew developed emulsion breaking, oil a nd hyd rocarbon a dsorber. The oily w a ter sepa-
rat ing systems w ill be eq uipped w ith a 15 ppm oil content a larm device, type te sted a nd a pproved
in accorda nce w ith IMO Resolution MEPC.107(49). A 3-w a y diverting valve w ill be a ctivat ed by t he
a larm d evice, if necessa ry in a ccord a nce w ith MARPOL a nd cla ss req uirement s. The syste m come s as
a complete pa ckag e, skid mount ed w ith a ll necessa ry accessories a nd controls.
Q = 0.5 - 10 m3/h
-
8/13/2019 Marine Pumps and Equipment
29/34
VN - Pumpen
31
3
Marine pumps and equipment
HFO Booster Modules
Tod a y a ll the ships a re using hea vy fuel oil high viscosity and ba d q ua lity d ue to the fuel price and
the o w ners need for low cost operat ion.
The only w a y to ensure proper trea tmen t o f fuel oil a nd t o prote ct the ma in and a uxilliary engines
is to insta ll in the fuel oil system the eq uipment f or hea vy oil fuel cond itioning. To reduce the
building cost of t he ships, shipya rds a re requesting th at a ll of t he eq uipment req uired f or the
cond itioning /trea tm ent o f HFO be insta lled on o ne unit/mo dule.
The Heavy Fuel Booster Module is the complete solution fo r fuel oil trea tmen t b etw een t he d aily
service ta nks a nd m a in propulsion a s w ell a s a uxilia ry eng ines.
The philisophy o f t he system is to ha ve a self-conta ined unit provided w ith a ll the eq uipmentrequired, as requested b y the custo mer, ensuring t rouble-free opera tion w ith a minimum of
insta lla tion a nd a djustmen t w ork. This a pproa ch dema nds a high d eg ree of f lexibility for the
mechanical as well a s the electrical equipment w hen de signing th e mod ule.
The mo dules are design ed a ccording to :
- Eng ine makers req uests a nd shipow ners operat ional stand a rds
- Specific Eng ine Roo m d esig n req uirement s
- Simple installation (all conne ctions ma de a ccording to pa rticular eng ine room la yout,
easy to mount and to put in function).
Before d elivery all the mod ules a re fully tested a nd certif ied in presence of reque sted
Class Surveyor.
Fuel oil treatment
Supply of fuel oil with adequate cleanliness, pressure and viscosity to consumer (engine)
Supply
line
Filt ra t io n Co nsumer
FiltrationHea t ing Visco sit y
control
Booster
circulation
-
8/13/2019 Marine Pumps and Equipment
30/34
VN - Pumpen
32
3
Marine pumps and equipment
HFO Booster Modules
-
8/13/2019 Marine Pumps and Equipment
31/34
VN - Pumpen
33
3
Marine pumps and equipment
F.O. Boo ster un it f or M.E.
F.O. Boo ster un it f or M.E.
HFO Booster Modules
-
8/13/2019 Marine Pumps and Equipment
32/34
VN - Pumpen
34
3
Marine pumps and equipment
HFO Booster Modules
-
8/13/2019 Marine Pumps and Equipment
33/34
VN - Pumpen
35
3
Marine pumps and equipment
F.O. Boo ster u nit fo r A.E.
F.O. Boo ster u nit fo r A.E.
HFO Booster Modules
-
8/13/2019 Marine Pumps and Equipment
34/34
VN - Pumpen
3
Marine pumps and equipment
Turbo charg er lubrica tion oil mod ule
HFO Booster Modules
Fuel oil con dition ing un it
for boilers burner