March 2016 Greetings to Go Paris Flea...

Paris Flea Market Materials:□ Greetings to Go

Tools and Supplies:□ Scor-Pal®□ Adhesive□ Tape□ Foam Adhesive□ Paper Trimmer□ 3x14” CS® Grid Ruler□ Scissors

□ CS® Glue Pen□ CS® Ash Ink□ CS® Ink Applicator□ Paper Piercing Tool and Cork Board□ 1” Circle Punch□ Stapler and Staples□ Frame-shaped Die (Optional)

Preparation:

1. Trim the White printed cutaparts into sections as indicated by the artwork.

2. Scoring and folding information is listed within the instructions for each card set. TIP: The “bump” of the score goes on the inside of the fold.

3. If you do not have an item to complete the card as shown, simply omit or substitute the item.

All rights reserved. ©2016, Club Scrap, Inc. (888) 634-9100 • www.clubscrap.com • email: [email protected]

Assembly Line Cardmaking

March 2016 Greetings to Go

Paris Flea Market

March 2016 • Paris Flea Market Greetings to Go • of 4

Set A: 4¼x5½” Dk. Gray Cards with 3½x4¾” Black and 3¼x4½” Pink PanelsScore and fold each 4¼x11” Dk. Gray card horizontally at 2¾ and 5½”.Punch a 1” circle from each 3½x4¾” Black panel.(The circle will be used as a “stopper” to hold the tent card, and the punched area of theBlack panel will be hidden by the Pink panel.)

©2016, Club Scrap, Inc. (888) 634-9100 • www.clubscrap.com • email: [email protected]

Notes: For each card, attach the 1” punched circle to the upper center of the Dk. Gray card base with a fleur-de-lis brad; nest a cutapart onto the Pink and Black panels and wrap with a satin pink three-part bow; adhere the panels to the bottom card flap.

Notes: Adhere the White “Thinking of You” cutapart to the inside of the card.

Notes: Adhere the Pink “Happy Birthday” cutapart to the front of the card with foam adhesive.

Notes: Adhere the White “Just a Quick Note” cutapart to the inside of the card.

Notes: Die cut the Pink “Thank You” cutapart, if desired, and adhere with foam adhesive.


Set B: 4½x6¼” White Cards with 4⅛x6” Pink Pattern and 4x6½” Pink PanelsScore and fold each 6¼x10⅞” White card horizontally at 2 and 6½”.Score and fold each 4x6½” Pink panel horizontally at 3¼”. For each card, nest the Pink Pattern panel onto the large card flap.


Notes: Nest the Pink cutapart onto the narrow flap of the White card; layer the White “Find Beauty” cutapart onto the folded Pink panel and attach to the narrow flap; sandwich a ribbon between the folded Pink panel and flap; tie into a bow to close the card; nest the White “You are too kind” cutapart to a corresponding Pink cutapart and attach to the inside of the card.

Notes: Nest the Pink cutapart onto the narrow flap of the White card;

layer the “With Deepest Sympathy” cutapart onto the folded Pink panel and attach to the narrow flap; nest

the White “Our thoughts are with you” cutapart to a corresponding

Pink cutapart and attach to the inside of the card.

Notes: Repeat assembly process used for the “sympathy” card; adhere the White “Thank You” cutapart to a corresponding Pink cutapart and attach to the inside of the card.

Notes: The direction of the folded Pink panel can be reversed to open from the right edge; nest the White “Happy Birthday” cutapart onto the

corresponding Pink cutapart and adhere to the inside of the card.


Set C: 3¾x5” Lt. Gray Cards with 3½x4¾” Black and 3⅜x4⅝” Pink Pattern PanelsScore and fold each 5x7½” Lt. Gray card horizontally at 3¾”.Adhere the 3⅜x4⅝” Pink Pattern panel to the inside of each folded card.


Notes: Nest the White “Thank You” cutapart to the Black panel and adhere to the card.

Notes: Ink edges of a White die cut tag with Ash ink; fold a 2” length of pink satin ribbon in half and staple the ribbon to the tag; die cut a Pink cutapart with a frame shape and adhere to the tag; attach the tag to the inside of the card.

Notes: Nest the White “Remember . . .” cutapart to the Black panel; add a fleur-de-lis brad and adhere the panels to the card.

Notes: Cut two slits in the White “Thank You” cutapart and slide ribbon through; secure ribbon ends on the back of the cutapart and add a brad; nest the cutapart and Black panel onto the card.

Notes: Cut two slits in the White “Happy Birthday” cutapart and slide ribbon through; secure ribbon ends on the back of the cutapart and add a brad; nest the cutapart and Black panel onto the card.

March 2016 Greetings to Go Paris Flea...

Documents

Transcript of March 2016 Greetings to Go Paris Flea...