1 / 42

Commercial Bid for RCBC Project of MPSEDC RCBC Tender No. MPSEDC/36-RCBC/2015/290 Name of Bidder

S.NO ItemQty Unit

Rate Basic VAT Service Tax Total

A Dismantling1

100 cum 0.00

2100 sqm 0.00

3100 cum 0.00

4100 cum 0.00

5100 sqm 0.00

6.a

Of area 3 sq. metres and below 120 each 0.006.b

120 each 0.00

7100 sqm 0.00

8100 sqm 0.00

9

100 sqm 0.00

B Civil Work

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. work (Payment shall be made on the cross sectional area of R.C.C. work) as per direction of Engineer-in-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge:

Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

2 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total10

Cement mortar 1:4 (1 cement : 4 sand) 50 cum 0.0011

Cement mortar 1:3 (1 cement : 3 sand) 400 sqm 0.0012

50 sqm 0.00

131:4 (1 cement : 4 sand) 180 sqm 0.00

14 15 mm cement plaster on the rough side of single or half brick wall of mix :

1:4 (1 cement : 4 sand) 100 sqm 0.0015

100 sqm 0.00

C Door Windows Works

(200MM) Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorpt ion not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete.

(100MM) Providing half brick masonary with well burnt chimney bricks in bull patent trench klin manufactured by ghol process crushing strength not less than 40 kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level

Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of half brick masonry.

Plaster 12 mm cement plaster of mix :

Providing and fixing chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails on vertical and horizontal junctions of RCC and brick wall including scaffolding and all lead and lift etc. complete before plastering upt 10 meter height.

3 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total

16 40 sqmt 0.00

17

250 sqmt 0.00

18

160 sqm 0.00

Windows- Providing and fixing aluminum powder quoted two track sliding/ openable window ventilator made out of extruded aluminium section conforming to IS: 733, IS: 1285 and IS:1868 with outer frame of size 60mmx32mm, including jointing with extruded aluminium cleat and neoprane weather stripping gasket bevelled edge beading screws and including float glass 4mm thick(modi/saint gobain/equivalent) but including all fixing of superior quality( decorative type) such as door handles, tower bolts, hinges, star lock, being etc. complete including applying a coat of lacquer as per direction of e-i-c duly fixed in walls with 16mmx3.15mm lugs 10cm long embedded in cm 15x10x10 in cc 1:2:4 or with wooden plug and screws with roul plugs and screws with fixing clips or with bolts and nuts reqd. Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Upto 5mm depth and 5 mm widthProviding and fixing fully glazed pivoted doors at the main entrance as shown in the drg. Door shall consist of wooden sections (CP teak wood / seasoned steam beach wooden sections) 150 x 65 mm for top & bottom rails, 100 X 65 mm for vertical styles. 12mm thk. Approved make clear float glass shall be provided and fixed in the framing .all the edges of the glass shall be machine polished. Rate shall incclude approved locking systems, 1 pair of 450 mm long S. S. Handles, floor springs & miscellaneous hardware items and mellamine for the wood frame.

Flush door - Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved make with accessories metioned below.

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality).

4 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total

D Flooring19

19.a 600x600x9.8mm,matt 3700 sqmt 0.0019.b 150x600x9.8mm,matt, wooden finish 400 sqmt 0.0020

100 sqmt 0.00

21

400 sqmt 0.00

E False Ceiling

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete :200x10mm

Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete :125mm

Providing and fixing ISI marked 85x42mm stainless steel pull bolt lock with necessary screws bolts, nut and washers etc. complete.

Door closer-Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.

Providing and laying matt finished vitrified tile of sizes having water absorption less than 0.05% and conforming to IS: 15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) or quick set adhesive in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Skirting- Providing and laying Vitrified tiles in different sizes, with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer in all colours and shade in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600x9-10 mm

Grouting the joints of flooring /skirting, risers of step of vitrified tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/ grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm

5 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total22

2800 sqm 0.00

22.a100 sqm 0.00

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of 10mm thick plaster of Paris (gypsum anhydrous) sheet to ceiling section and perimeter channels with the help of dry wall screws of size 3.5x25mm at 230mm interval including jointing and finishing to a flush finish of tapered and square edges of POP board with jointing compound (POP paste) including the cost of making openings for light fittings, grills, diffusers cutouts made with frame of perimeter channels suitably fixed all complete as per drawing, specifications and direction of the Engineer-in-charge.

Extra for any sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling

6 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total23

1400 sqm 0.00

F Partition & Paneling Works

Armstrong ceiling-Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Classic Lite (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed GRID.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥87%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , suitable for Green Building application, with Recycled content of 30%.The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kgs/M2 & pull out strength of 100kgs.. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with suspension sydtem of Armstrong make.The Tile & Grid system used together should carry a 30 year warranty. INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. ARMSTRONG SUSPENSION SYSTEM accessories manufactured and supplied by Armstrong World Industries consisting of M6 Anchor Fasteners with Vertical Hangers made of Galvanised steel of size 26 x 26 x 25 x 1.2mm with a Galvanised Thickness of 80gsm, A pre Straightened Hanger wire of dia – 2.5 mm of 1.8 m length., thickness of 80gsm and a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick, galvanised spring steel

7 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total24

50 sq.mtr 0.00

25

2500 sqm 0.00

26

1000 sqm 0.00

27

3600 sqm 0.00

28

4000 sqm 0.00

Aluminium Partitions : Proiding & fixing partitions made out of frame in 45 x

45 mm heavy duty aluminium box frame, covered with 12 mm thick pre

laminated (both sides) ply /board duly fixed on frame. The partition may be

fully solid or partly glazed with of approved make, grains, finish & shade as

per pattern provided in drawings. If glazed, the glass needs to 12 mm float

glass with necesarry film of garware/3m Equivalent preferably in single sheet

with 19 mm wooden frame as border duly melamine polished to match

laminate. The cost shall include.fixing of partition to floor, over ceiling all

provisions to be made for all electrical, networking boxes additional

framework etc as required heights/levels with necessary additional supports

as directed. Only visible portion shall be measured and paid for.Full height partitions, fully panelled- Providing and fixing at site wooden partitions 75mm thick with framework of approved quality seasoned wood (sal/ second class teak / Pine) section 47x47mm at 600mm c/c both way duly treated with approved quality anti termite paint, covered with 12mm BWR ply on both sides . The cost is inclusive of all materials, labour, etc complete.

Full height partitions, part panel/part glass- Providing and fixing at site wood and glass partitions 75mm thick with framework of approved quality seasoned wood (sal/ second class teak / Pine) section 47x47mm at 600mm c/c both way duly treated with approved quality anti termite paint, covered with 12mm BWR ply on both sides. The partition includes providing and fixing of 8mm glass with etching as per design . All exposed edges to be finished with 1st quality rubber wood/t.w. beading of size 45x10 mm which is to be melamine polished as per drawing detail. The cost is inclusive of all materials, labour, etc complete.

Paneling- Providing and fixing at site panelling with wooden framework of approved quality seasoned wood (Sal/ Second class teak / Pine / ) section size 47x47mm covered with 9mm BWR ply. The cost is inclusive of all material, labour, wastage, etc.

Laminates- Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality.

8 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total29

1000 sqm 0.00

G Furniture Work30

80 sqmt 0.00

31

72 no 0.00

Carpet- Providing and fixing fully synthetic 100% BCF loop pile carpet, pile height 6mm pile weight 650 gm fixed on panelling by fevicol etc. complete

Storage units (laminate finish) (400mm wide)- Providing and fixing at site file/storage cabinet made up of 19mm BWR block board with 1mm thick laminate as per drg. All drawers to be mounted on telescopic channels of (hettich/ ebco/ equivalent) approved make. All exposed edges to be finished with 1st quality t.w. beading to be melamine polished and all inside surfaces to be finished with 0.8mm laminate.The cost is inclusive of all materials, accessories, ss handles, lock, labor, etc complete.

Faculty Table,1200x750x750- Providing and fixing table of specified size to be made up of 19mm BWR block board as per drawing using hettich/ebco/equivalent make hardware, having a storage unit withone drawers as per drawing given. Provision has to be made for a keyboard tray, CPU stand.All exterior surfaces to be finished in 1.0mm laminate as specified by architect and all inner surfaces to be finished in 0.8mm laminate of approved shade with necessary hardware such as handles, wire manager, telescopic drawer slides etc. as per design. All exposed edges to be finished with 1st quality t.w. beading which is to be melamine polished.The cost is inclusive of all materials, labour etc. complete.

9 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total32

32.a Work station- 1 seater module : size 750 x 600 x 750mm 36 no 0.0032.b Work station- 2 seater module : size 1500 x 600 x 750mm 180 no 0.0032.c Work station- 3 seater module : size 2250 x 600 x 750mm 216 no 0.00

Work station: Providing and fixing training workstation of 750mm height with privacy screen height 150mm total 900 mm from finished Floor level as per drawing. Structural Support System: Benching or Linear workstations shall be constructed using high grade metal sections in twin leg type construction with end caps & levelers. The leg assemblies shall be metal MS pipe (50mm) finished with superior powder coat finish. Beam used shall be metal MS pipe with superior powder coat finish of dimension s 100 mm x 40 mm. Worktops: Shall be 25mm thick Pre laminated board with machine pressed PVC edge band 2.0 mm thick all around as per architects specifications. Work surface height shall be 750 mm . Privacy Screen: The modular furniture workstations shall have provisions for various options as per requirements including Laminated Glass (8mm thk), fabric panel, perforated steel sheet, etc. Wire Management: The Vertical & horizontal wire carriers made of Metal/High grade Polymer placed below the work surface using brackets fit to carry upto 40 wires along the length of the system. Wire manager should accommodate a separator within the wire carrier to separate electrical & data cables. Provision for switch plates with flip top to be on worktop/ wire management case/screen as decided by the architect.Approved make are Wipro/spacewood/Godrej/Geeken. The drawings & dimensions are indicative and may vary as per manufacturers specifications or as per the drawings given by the Architect.

10 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total33

1350 Nos 0.00

34

36 Nos 0.00

35

36 Nos 0.00

36

12 Nos. 0.00

Chairs- Medium back chair ergonomicaly designed for complete lumber support, the seat and back assembly are made of 12 mm or more hot pressed plywood die pressed foam upholstery seat 40kg/m3 and back32kg/m3 covered Fire retardant fabric ,PU Arms and base made of metal finish ,with five star base with metal , with Swivel tilt mechanism. with superior Nylon-6/Ultramid -56 twin wheel castors having self lubricating properties for friction free movement. cover fabric/leatherite tapestry, With locking arrangements. with under structure made of CRCA metal pipe confirming to following :Thickness 0.20 mm – 6.0 mm Temper 1/8 Hard , 1/4 Hard, 1/2 Hard, Full Hard Surface Finish Dull/Bright/Matt/Mirror Grade D/DD/EDD/Super EDD/IF Edge Mill Edge/ Slit Edge,Thickness Tolerance +/- 0.02 mm Width Tolerance As per Specification Length Tolerance(For Sheets) - 0 mm/+2 mm Camber Tolerance 1.50 mm Max. duly .Structure made of 25mm X 25 mm thick metal CRCA.Seat & back assembly which is made of 1.2mm rhick hot pressed die moulded plywood .The seat and back are arrested together. with polyurethane foam with 45+/2 kg/m3 and hardness + 20+/2 on hampden machine at 25% compression. cover fabric/leatherite tapestry, Seat depth 20" X 20" width,back,over all Back height 36” or more of approved make Wipro-Biz or Mint/Spacewood-Elam/Geeken-GP402/Godrej-Amigo

Sofa- 3 seater with wooden frame of approved quality seasoned wood (sal/ second class teak), overall covered with leatherite tapestry, ss legs, dimensions 1950 x 760 x 750 mm. Flat spring below foam at seat, stitching, slopes contour, hemming with seat of 80mm thick softy foam, 100mm 40 density foam on back and arms on both face with 40mm thick high density foam. Color, texture and quality to be approved by engineer in charge.

Sofa- 2 seater with woodenframe, overall covered with leatherite tapestry, ss legs, dimensions 1450 x 760 x 750 mm. Flat spring below foam at seat, stitching, slopes contour, hemming with seat of 80mm thick softy foam, 100mm 40 density foam on back and arms on both face with 40mm thick high density foam. Color, texture and quality to be approved by engineer in charge.

Corner table 750x750x400- Providing and placing corner tables as per drg made of 19mm BWR block board finished with 1.0mm laminate of approved shade .The cost is inclusive of all labour and material as approved by engineer- in- charge.

11 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total37

12 Nos. 0.00

H Paint 38

400 sqm 0.00

39400 sqm 0.00

40400 sqm 0.00

41100 sqm 0.00

42100 sqm 0.00

43

400 sqm 0.00

I Other Items44 Providing & Fixing of M.S. Collapsible Gate 180 sqm 0.0045

300 Sq.mtr 0.00

46

36 Nos 0.00

47 Providing & Fixing of First Aid Box 36 Nos 0.0048

36 Nos 0.00

Side table, 750x450x400- Providing and placing side tables as per drg made of 19mm BWR block board finished with 1.0mm laminate of approved shade . The cost is inclusive of all labour and material as approved by engineer- in- charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, Like birla white /JK white or equivalent, over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.

Providing and applying POP Punning on walls and columns (average 12mm thk). The rate shall include scrapping, levelling and preparing the surface.and all types of grooves above the skirting, around the window and door frames

Roller blinds- Providng and fixing of vertical dust proof blinds of approved shade, texture and fabric (opaque/ eclipse) make complete in all respects and properly finished to the satisfaction of engineer in charge. Make vista, hunter douglas or approved brand.

Providing and supplying table top water dispensor with hot and cold facility and having cool water storage capicity 3 ltr. Make Carrier Midea/Voltas/Blue Star. Including Stand for Water Dispenser (20" x 20" x 30")

CO2 (Aluminium) Type Fire Extenguisher 4.5 Kg. Seamless Aluminium Alloy 6061, Discharge valve IS 3224 compliant, Compressed gas as per gas cylinder rules 2004, ISO 9001, ISO 1002:2004 Certified, & EN approved with 3 years Warranty, Clear Instruction Label, Fire Rating 13B . Make : Cease Fire, Supremex, Kedy

12 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total49

100 sqm 0.00

5050 sqm 0.00

51 Wall Paper as approved by architect 150 sqm 0.0052

50 sqmt 0.00

53 Door Mat / Foot Mat 100 Sq.m. 0.0054

100 Sq.m 0.00

55150 no. 0.00

J Electrical Items56

Light point/ Fan point56.a Short Point 1200 Each 0.0056.b Medium Point 400 Each 0.0056.c Long Point 400 Each 0.00

3 pin 6 amp socket outlet on separate Board56.d Short Point 1200 Each 0.0056.e Medium Point 800 Each 0.0056.f Long Point 800 Each 0.0057

1800 Each 0.00

Providing and fixing of ceramic magnetic white board including accessories like markers, dusters , tray etc.

Soft board- Supplying and fixing of soft board of size 600x600mm with backing of 8mm ply and finished with tapestry as approved by engineer- in- charge.

Providing and fixing 50 micron thick Frosted heat /light control film to window/door glazing as marketed under the brand name garware/3M or equivalent as approved.

Glow sign Board of 900mm x 150-200 mm as per the legth required with multiple colour options both indoor as well as outdoor application.

Name Plate made of Acrylic sheet of 100mm x 3-4mm as per the legth required.

Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5 Sq.mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid PVC conduit (HMS) ISI marked of suitable size and 1.5 Sq. mm PVC insulated copper earth continuity conductor of green colour inside conduit including painting etc. as required as per specification for :-

Point wiring (excluding metallic switch box & sheet but including switches, sockets) for 3 pin 6 amp socket outlet point with 1.5 Sq.mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid PVC conduit (HMS) ISI marked of suitable size and 1.5 Sq. mm PVC insulated copper earth continuity conductor of green colour inside conduit with required materials as per specification on same board.

13 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total58

58.a a) 2x2.5 Sq.mm. 6000 RM 0.0058.b b) 4x2.5 Sq.mm. 4000 RM 0.0058.c c) 6x2.5 Sq.mm. 3000 RM 0.0058.d d) 8x2.5 Sq.mm. 2000 RM 0.0059

On Separate Board59.a Short Point 80 Each 0.0059.b Medium Point 160 Each 0.0059.c Long Point 80 Each 0.0059.d Extra Long -I 80 Each 0.0059.e Extra Long -II 40 Each 0.0059.f Extra Long -III 40 Each 0.0060

60.a PVC Conduit 20mm (HMS) 6000 RM 0.0060.b PVC Conduit 25mm (HMS) 7000 RM 0.0060.c PVC Conduit 32mm (HMS) 8000 RM 0.0061

61.a 1 Or 2 Module 10 Each 0.0061.b 3 Module 200 Each 0.0061.c 4 Module 50 Each 0.0061.d 6 Module 2000 Each 0.0061.e 8 Module 50 Each 0.0061.f 12 Module 200 Each 0.0061.g 16 Module 10 Each 0.00

Wiring for circuit wiring with PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid PVC conduit (HMS) ISI marked suitable size including painting etc. as required as per specification.

Point wiring (excluding metallic switch box & sheet ) for 3 Pin 16 Amp. Socket Outlet Point With 4 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Concealed rigid P.V.C Conduit (HMS) ISI Marked of suitable size etc. with 16 Amp. F.T. Switch & Socket / S.S.Combined 6/16 Amp. of ISI Marked and 4 Sq.mm. PVC insulated copper earth continuity conductor of green colour inside conduit as per specification for

Supplying and fixing PVC conduit ISI marked alongwith the accessories in concealed system including painting, flexible pipe etc. as required

Supplying and fixing of approved make modular type metal box with modular frame/ base plate and cover plate including fixing in concealed / surface excluding switch,socket etc. as required for:-

14 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total62

62.a 1x1.5 Sq.mm. cable62.b 1x1.5 Sq.mm. cable 4000 RM 0.0062.c 3x1.5 Sq.mm. cable 4000 RM 0.0062.d 1x4 Sq.mm. cable62.e 3x4 Sq.mm. cable 2000 RM 0.0062.f 6x4 Sq.mm. cable 2000 RM 0.0063

63.a 4 WIRE SUB-MAIN63.b 6.0 sq mm cable in 25 mm conduit 800 RM 0.0063.c 10.0 sq mm cable in 32 mm conduit 1000 RM 0.0063.d 16.0 sq mm cable in 32 mm conduit 1200 RM 0.0064

64.a MCCB with Breaking Capacity 25 KA at 415 V64.b Current Rating - 125 Amps & 80% -100% adjustable thermal 40 Each 0.0065

65.a SINGLE POLE (SP)65.b 6 Amp to 32 Amp rating 1000 Each 0.0065.c TRIPLE POLE (TP )65.d 50 Amp to 63 Amp rating 36 Each 0.0066

66.a 4 way (4+12) 36 Each 0.00

Supplying and drawing single core PVC insulated cable FR with copper multi strand conductor ISI marked in existing rigid conduit in surface or concealed as per specification.

Wiring for sub-mains with PVC insulated cable FR with copper multi strand conductor ISI marked in recessed / concealed rigid PVC conduit (HMS) ISI marked of suitable size(Conduit included) including 2mm thick accessories,connection etc ,as required as per specification

Supplying of ISI Marked and approved make of Moulded Case Circuit Breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard conforming to IS – 8828

Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898 :2002 but without enclosures :-

Supplying of approved make TPN MCB DB Metal Double Door IP 43 protection with provision for FP MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoing inclusive of Busbar, Neutral bar, Earth bar & two earth terminals etc. complete as per IS:13032( exclusive of MCB & isolator ):

15 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total67

67.a 4 way without MCCB 36 Each 0.00Fixing of MCB/MCCB/Isolator

68

68.a MCB/Isolator SP/DP 1000 Each 0.0068.b MCB/MCCB Isolator TP/TPN/FP 80 Each 0.0069

69.a As per quantities 80 Each 0.0070

70.a 100 Watt 2 Module 50 Each 0.0071

71.a Ceiling Fan (5 star & ISI)-1200 mm Sweep 50 Each 0.0071.b

220 Each 0.00

72

72.a 300mm sweep 900 RPM 36 Each 0.00

Supplying of approved make, powder coated Metal Double Door Vertical TPN MCB DB IP 43 protection with provision for MCCB upto 160A TP/ FP 36kA as incomer and space for SP/TP MCBs as outgoing (without MCCB / MCBs) inclusive of busbar & connections etc

Fixing of MCB/IMCCB/solator in sheet steel enclosure as required as per acceped practice,including mounting on busbar and cable connection etc. complete (labour only)

Labour charges for fixing sheet steel enclosures, MCB DB flush mounting type, as per accepted practice, duly embedded and end plate completely flushed in wall, cable connection etc. complete:-

Suppling and fixing of approved make step type Modular electronic, Fan regulator including connection etc. as required on existing board

Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/1979 with up to date ammendments

Supplying, erection and testing of approved make Wall Mounting fan complete with Wall Bracket ,canopy, blades, speed Regulator etc .A.C 230-250 volts with connections and including raw bolt/Anchor hole fastener etc. complete finished of approved as required. 300 sweep.Supplying, erecting and testing of approved make Exhaust fan heavy duty with mounting frames, blades AC 230-250 complete connection and including, frame bolt/ Anchor hole fastners etc. complete finished of approved as required.

16 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total73

73.a 15 W, 180/200mm 1000 Each 0.0073.b Led luminiare 2' X 2', 36W, 4-6.5K 300 Each 0.0073.c Led luminiare 1' X 1', 24W , 4-6.5k 36 Each 0.0073.d

36 Each 0.00

73.e 72 Each 0.0073.f LED Strip light (5watt/m) 50 rmt 0.0074

36 Each 0.00

75 Labour charges for excavation 2.5 cum 36 Each 0.0076

1600 RM 0.00

77

77.a 4 Sq mm 400 RM 0.0077.b 6 Sq mm. 400 RM 0.0077.c 10 Sq mm. 800 RM 0.0077.d 16 Sq mm 1200 RM 0.0078 Service Cable

3½ CORE ARMOURED25 Sq.mm 1500 Metre 0.00

Supplying and fixing recessed mounting LED down lighter, LED of 1 to 3 W each assembled on single MCPCB, having color temp 6500K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy>80lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Housing made of CRCA powder coated frame with glare free diffused polycorbonate cover. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory. i/c connection wire, testing etc. to complete the job. 2 Yrs Guarantee certificate from manufacturer.

Supplying fixing and testing of T- 5 lamp (1 X 28 watt ) Batten type Tube fitting with epoxy white powder coated CRCA sheet steel complete with electronic ballast (HF), rotor holders, duly wired ( without tube rod ) fixing wall/ceiling on PVC clamp/round plate with necessary materials complete as required with T - 5 Lamp - 28 Watt

Supplying,Fixing and Testing of Compact Flourescent Lamp (CFL) with inbuilt electronic ballast ISI marked BC / ES cap of approved make as required as per specification of 15 WattChemical Earthing With 3 mtr. G.I. Pipes having outer pipe dia of 50mm having 80-200 micron galvanising, Inner pipe dia. of 25mm having 200-250 Micron galvanising, connection terminal dia.of 12mm in nominal soil with 50 kg (Two Bag) Back filling Compound.

Providing and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15mm dia G.I. Pipe (B class) from earth electrode as required.

Supplying and drawing PVC insulated copper cable ( Earth Continuity Conductor ) of Green colour FR with copper multi strand conductor ISI marked in existing conduit along with other wires as required as per specification :

17 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total79 Raceway & Junction Box

800 Meter 0.00

80 Junction box for the above raceway 400 Nos. 0.00K UPS

81 36 Nos 0.00

L CCTV

82180 no. 0.00

abcdefg 1pcs RJ45(10/100M Adaptive)hijkl Remote view client software

mn Support iPhone, Windows Mobile, BlackBerry + Symbian +Androidopq

83 Suply of 8 channel NVR as per below technical specification 36 no. 0.00abcdefghi Dual Stream (Each channel can set main stream and sub stream )

Supply ,installation ,testing & commissioning of dual channel Aluminium cable tray 2mm thick with cover and all accessories like perforated tee , 90 degree horizontal bend ,elbow , horizontal tee, supports, hangers etc. of size 150 mm (depth -60mm)

Supply, installation and testing of 10 KVA Online UPS with 120 Min. Back up as per the specifications attached

Suply of IP C MOUNT Camera 1.3 MP with 2.8-12 MM Verifocal lense as per below technical specification 1/3” CMOS Sensor 1.3 MP High Resolution HD real-time video C/CS Mount 2.8-12 MM 1.3 MP Lens Onvif 2.0 P2P Technology

RTSP/FTP/PPPOE/DHCP/DDNS/NTP/UPnP ICR Auto Color to B/W; ICR Alarm Motion detection

Audio Interface 1 Ch In/ 1 Ch Out

Operating Temperature -10 - +55 ℃ ℃Operating Humidity 0% - 90% Power Supply DC12V

Embedded LINUX operating system Video Channel: 4ch 720P input. Onvif Supported Audio Channel: 1ch RCA intercom, 1ch RCA output Video Resolution: 4ch 720P Support 1 SATA HDD, max upto 4 TB. Standard Specification: Mouse, USB×3, Network, VGA, HDMI HDMI supported

18 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Totalj Image Motion Detectionkl

mn

84 Survillance Harddisk 2 TB Make WD/ Toshiba / Seagate 36 no. 0.0085 LED Monitor cum Display 20" Make LG / Samsung 36 no. 0.0086 Supply & Fixing of CAT6 Cable Make Dlink / Molex in PVC Pipe 7200 mtr 0.0087 Network Switch 10/100 8 Port make Dlink/Digisol/Cisco/Netgear 36 no. 0.0088 RJ 45 connectors 360 no. 0.0089 Camera Power Supply 12V / 2 Amp 36 no. 0.0090 Modem/ADSL Router 300 mpbs make Dlink/Digisol/Cisco/Netgear 36 no. 0.0091 CAT 6 RJ45 Patch Cord F/UTP 3 Mtr. 120 each 0.0092 Power Cable 1.5 sq. mm. 2 core 360 mtr 0.0093 Installation Charges 36 lot 0.00M Data Cabling94

1200 nos. 0.00

9528000 Mtr 0.00

96

96.a CAT 6 RJ45 Patch Cord F/UTP 1 Mtr. 1500 nos. 0.0096.b CAT 6 RJ45 Patch Cord F/UTP 2 Mtr. 1500 nos. 0.0096.c CAT 6 RJ45 Patch Cord F/UTP 3 Mtr. 200 nos. 0.0097.a

72 nos. 0.00

97.b36 nos. 0.00

98

98.a36 nos. 0.00

N Audio / Video 99

150 nos. 0.00

Support iPhone, Windows Mobile, BlackBerry, Symbian, Android Power Supply 12V DC Temperature -10 - +55 ℃ ℃Working Humidity 10%-90%

Supply, Installation testing and commissioning RJ - 45 Computor Jack cat 6 with shutter Modular (2Module)

Suppling and drawing 4 pair shielded, 0.5 mm PVC.Insulated copper conductor un-armoured Cat-6 computor cable FR in existing surface / concealed ,steel / PVC. Conduit/Casing-N-Capping as required.

Supply, Installation testing and commissioning of patch cord as mentioned below :-

Supply, Installation testing and commissioning of 19" Modular Patch - 1 U Patch Panel 24, RJ 45 Cat-6 connector

48 Port 10/100/1000Mbps Layer 2 Enhanced Web/CLI Managed Switch with 2 Gigabit SFP Ports Make : D-Link, CISCO, Digisol

Supply, Installation testing and commissioning of wall mounting rack, for computer switches complete as mentioned below :-

12U cabinet 638X600X500, wall mounting with adequate power strips and Fan etc.

Providing & Fixing of special Music Speakers with 6 Watts RMS output with Line Matching Transformer (Recessed Ceiling Speaker) Make : Bosch / NX Audio / Brahler ICS / D&B Audio Technik

19 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total100

36 nos. 0.00

101 Providing of Collar Mike 36 nos. 0.00102

2000 Mtr. 0.00

103

36 nos. 0.00

104 Providing 8’X5’ Glass Beaded Instalock, Autolock Wall Mounted Screen.30 nos. 0.00

105 Providing 7’X4’ Glass Beaded Instalock, Autolock Wall Mounted Screen.6 nos. 0.00

106 Providing & Fixing of Ceiling Mount Kit 36 nos. 0.00107 Providing & Laying of following Cables

107.a RGB Cable720 Mtr. 0.00

107.b Power Cable 720 Mtr. 0.00107.c Audio-Video Cable 720 Mtr. 0.00107.d S Video Cable 720 Mtr. 0.00107.e Providing & Laying of HDMI Cable of 15 mtrs. 72 nos. 0.00107.f Providing & installing wi fi dongle. 36 nos. 0.00108

36 nos. 0.00

O Telephone Cabling108

108.a (ii) 2 Pair 1500 Rmt 0.00

Providing & Fixing of 100 Watts Amplifier. Make : Bosch / NX Audio / Brahler ICS / D&B Audio Technik

Providing & Laying of 48/0.2 mm 2-core sheathed copper special Speaker Cable

Providing & Fixing of 3200 Ansi – Lumen Projector with LCD/DLP technology, 10000:1 Contrast ratio, Image Size : 0.78 - 9.38m (30.79"-369.43” ) Diagonal 4:3, Native Resolution : WXGA (1280 x 800), Aspect Ratio : Native 4:3, Compatible 16:9, Input : S-Video, Composite, RCA Audio,2 x RGB D-Sub 15pin, 2 x Stereo Mini Jack, 1 x Component, 2 x HDMI, 1 x USB Type A, Output : 1 x RGB D-Sub 15pin, 1 x Stereo Mini Jack, Audio : 16W Loudspeaker, Control : USB Type B, RS232, RJ 45 LAN, 1 x Wireless LAN (Option), Make : Benq / Infocus / EPSON/LG

Audio Equipment Rack : Providing & Fixing of Equipment Rack for Processors and Amplifier with power strip and four panel and on caster wheels. Height 24U.

Supplying and drawing following pair of 0.5 mm size solid annealed copper conductor PVC Insulated telephone cable as per DOT Specifications in existing surface / concealed steel / PVC Conduit / Cassing-N-Capping as required.

20 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total109

109.a 10 Pair 800 Rmt 0.00110

110.a 10 Pair 36 nos. 0.00111 Supply, fixing and testing of RJ 11 telephone jack modular (1 Module) 80 nos. 0.00

P Fire Alarm System112

36 No 0.00

113

720 Nos 0.00

114 Do as above but Heat Detector 72 Nos 0.00115

360 Nos 0.00

11636 Nos 0.00

117 Supply, installation, testing of Hooter 90dB, Type complete with accessories 36 Nos 0.00

118

7200 mtrs 0.00

119 Installation Charges 36 lot 0.00

Q Air Conditioners

Supply installation, testing commissioning of 0.5 mm size Solid annealed copper, Jelly Filled Telephone Cables, Polythene Insulated, Petroleum Jelly Filled with Poly-al laminate moisture barrier, Polythene Sheathed, Unarmoured Polythene Jacketed Telephone Cables as per DOT Specifications of following sizes

Supply, Installation testing and commissioning of telephone Tag block Krone connector with enclosure and lock complete as mentioned below :-

Supply, fixing, testing & commissioning of Conventional Fire Alarm Control Panel, 2 Zone, with 24 volt SMF Batteries suitable for 24 hours back up time with battery charger complete with all accessories. One NO+NC contact for fire operation of Interlocks. Make : Honeywell/Agni/Fire Hut/Apollo/Eurotech

Supply, fixing, testing and commissioning of smoke detectors dual chamber Optical Conventional Type complete with base plate MS junction Box for termination into connections etc. Make : Honeywell/Agni/Fire Hut/Apollo/Eurotech

Supply, installation, testing and commissioning of response indicators suitable for above smoke detector complete with M.S. junction box top hylum sheet and required accessories.

Supply, installation, testing and commissioning of Manual Call Points Addressable Type, flush monted in partition or concealed in wall for manual actuation in case of fire.

Supply & Laying of 2 core 1.5sq.mm. copper FRLS Armoured cable 1.1 KV Grade for interconnection of smoke detectors response indicators, maual break glass and fire alarm accessories, junction boxes including termination.

21 / 42

S.NO ItemQty Unit

Basic VAT Service Tax Total120

120.a Capacity 1.0 Tr with min cooling capacity of 12000 BTU / 3400 Watt 36 Nos 0.00120.b Capacity 1.5 Tr with min cooling capacity of 18000 BTU / 5400 Watt 86 Nos 0.00120.c Capacity 2.0 Tr with min cooling capacity of 24000 BTU / 6400 Watt 108 Nos 0.00

121 2000 Rmt 0.00

122 2000 Rmt 0.00

123 Providing and fixing ms stand for outdoor unit 230 Nos 0.00124 Installation Charges 230 Nos 0.00

GRAND TOTAL (Rs. )

Providing, supplying and installing highwall split AC machine with 3 star rating of approved make with 100 % Copper Condenser & Evaporator and other features like Automatic Fan Speed, Shower Cooling, Blue Fin Condenser, Sun Light Sensor, Human Activity Sensor, With 30 Ft. Air Flow, PM 2.5 Air Purification, Anti-Bacterial Filter, Super Tropical Rotary Compressor, Eco Tough Casing, With Minimum COP 3.1 To 3.5, and Minimum CFM 490 etc complete as per specifications and upto 5 mtr copper piping, necessary cables, and installation at site. All cabling, piping etc has to be duly chased, recessed and repaired.

Providing and laying Copper refrigerant piping interconnecting the indoor unit and air cooled condenser with insulation Providing and laying Drain piping - Hard PVC pipe with 12mm expanded polythene insulation (25 mm)

22 / 42

Commercial Bid for RCBC Project of MPSEDC RCBC Tender No. MPSEDC/36-RCBC/2015/290

Amount

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

23 / 42

Amount

0.00

0.00

0.00

0.00

0.00

0.000.00

0.00

0.00

0.00

0.00

24 / 42

Amount

0.00

0.00

0.00

0.00

25 / 42

Amount

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.000.00

0.00

0.00

0.00

26 / 42

Amount

0.00

0.00

27 / 42

Amount

0.00

28 / 42

Amount

0.00

0.00

0.00

0.00

0.00

29 / 42

Amount

0.00

0.00

0.00

0.00

30 / 42

Amount

0.000.000.00

31 / 42

Amount

0.00

0.00

0.00

0.00

32 / 42

Amount

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.000.00

0.00

0.00

0.00

0.00

33 / 42

Amount

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.000.000.000.000.000.000.000.00

0.00

34 / 42

Amount

0.00

0.000.000.000.00

0.00

0.000.000.000.000.000.000.00

0.00

0.000.000.00

0.00

0.000.000.000.000.000.000.00

35 / 42

Amount

0.00

0.000.000.000.000.000.00

0.00

0.000.000.000.00

0.00

0.000.00

0.00

0.000.000.000.00

0.00

0.00

36 / 42

Amount

0.00

0.00

0.00

0.000.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

37 / 42

Amount

0.00

0.000.000.00

0.00

0.000.00

0.00

0.00

0.00

0.00

0.000.000.000.00

0.00

38 / 42

Amount

0.00

0.00

0.000.00

0.00

0.00

0.00

0.000.000.000.000.000.000.000.000.000.000.000.000.000.000.000.000.000.000.000.000.000.000.000.000.000.000.00

39 / 42

Amount

0.000.000.000.000.000.000.000.000.000.000.000.000.000.000.000.00

0.00

0.00

0.00

0.000.000.00

0.00

0.00

0.00

0.00

0.00

0.00

40 / 42

Amount

0.00

0.00

0.00

0.00

0.00

0.00

0.000.00

0.00

0.000.000.000.000.00

0.00

0.00

0.00

0.00

41 / 42

Amount

0.00

0.00

0.00

0.000.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.000.000.00

42 / 42

Amount

0.00

0.000.000.00

0.00

0.00

0.000.000.00