MANUFACTURING OF AIR BAGS
-
Upload
jagadish-reddy-kp -
Category
Documents
-
view
23 -
download
0
Transcript of MANUFACTURING OF AIR BAGS
![Page 1: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/1.jpg)
MANUFACTURING OF AIR BAGS
![Page 2: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/2.jpg)
CONTENTS
• INTRODUCTION• RAW MATERIALS USED• WORKING PRINCIPLE• PROPERTIES REQUIRED• MANUFACTURING PROCESS• QUALITY CONTROL(PROS AND CONS)• OUR IDEA• CONCLUSION• REFERENCE
![Page 3: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/3.jpg)
INTRODUCTION
• An air bag is an inflatable cushion designed to protect automobile occupants from serious injury in the case of a collision.
• One of the first patents for automobile air bags was awarded to industrial engineer John Hetrick on August 18, 1953.
• In 1988, Chrysler was the first United States company to install standard driver's side air bags
![Page 4: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/4.jpg)
RAW MATERIALS USED
• Main parts of an air bag module are AIRBAG,INFLATOR, and PROPELLENT
• AIRBAG – nylon-6, nylon-6.6 woven fabric(coated and non coated)
• Inflator - stamped stainless steel or cast aluminium
• Propellant- in the form of black pellets, is primarily sodium azide combined with an oxidizer
![Page 5: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/5.jpg)
WORKING PRINCIPLE
![Page 6: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/6.jpg)
CHEMICAL REACTIONS
• Inside the airbag is a gas generator containing a mixture of NaNO3, KNO3, and SiO2
• REACTIONS:• 2NaN3 = 2Na + 3N2 • 10Na + 2KNO3 = K2O + 5Na2O + N2 • K2O + Na2O + SiO2 = Alkaline silicate
![Page 7: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/7.jpg)
PROPERTIES REQUIRED
• High Tensile strength • High Tear strength • Low Air permeability • Good Heat capacity • Good Folding behaviour • Better Energy absorption • Good Coating adhesion • Reduced skin abrasion (softness) • Good heat stability
![Page 8: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/8.jpg)
MANUFACTURING PROCESS
• Air bag production involves three different separate assemblies namely,
• PROPELLENT• INFLATOR• AIRBAG FABRIC• Some manufacturers buy already-made components,
such as air bags or initiators, and then just assemble the complete air bag module
![Page 9: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/9.jpg)
PROPELLENT
• The propellant consists of sodium azide mixed together with an oxidizer
• Manufacturers receive sodium azide and oxidizer from outside vendors
• They are mixed together at sophisticated computerized process control
• After blending, the propellant mixture is sent to storage
![Page 10: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/10.jpg)
INFLATOR
• Inflator consists of metal canister, the filter assembly—stainless steel wire mesh with ceramic material inside and initiator (or igniter)
• These sub components are received from outside vendors and assembled together
• The inflator sub-assembly is combined with the propellant and an initiator to form the inflator assembly
• The inflator assembly is then tested and sent to storage until needed
![Page 11: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/11.jpg)
AIR BAG FABRIC
• Air bag fabric is most popularly made by using NYLON-6.6 fibers
• Dupont, Allied Signal, Akzo and Toray are the major fiber suppliers of airbags
• Both woven and non-woven fabrics are used • The fabrics used to make a driver and passenger’s
airbags are quite different• Driver seat air bag is coated whereas passenger’s
airbags are uncoated
![Page 12: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/12.jpg)
AIR BAG FABRIC
• Sizing of yarns is made by one dip process which applies polyacrylic coating
• Generally, airbag fabrics are woven on rapier weaving machines or air jet looms
• When air bag material has been finished, it is cut into panels by laser and sewn with inflator assembly
![Page 13: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/13.jpg)
FABRIC CONSTRUCTION
• Weave :- plain• No. of head used :- 4• Warp yarn :- 840 denier(twisted)• Reed space :- 50”• No. of ends :- 1400• Denting order :- Body - 1 in dent Selvedge - 2 in dent• Selvedge ends :- 2 x 20 = 40• EPI :- 30 ( 840 denier twisted) • PPI :- 36 ( 840 denier twisted)
![Page 14: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/14.jpg)
Property Coated UncoatedAir porosity Precisely controlled Variable
Pattern cutting Easily cut More difficult
Sewing Easy to handle More difficult
Packageability Bulky Smaller package
Stiffness Variable Pliable top moderate
Burn thru Good resistance Not good
Deployment Excellent control Combing effects
Cost High Low
Recyclability Difficult Easier
![Page 15: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/15.jpg)
QUALITY CONTROL
• Propellants, before being inserted into inflators, are first subjected to ballistic tests to predict their behavior
• Testing is done for inflator system's ability to produce an amount of gas at a given rate, ensuring proper air bag inflation
• The air bags themselves are inspected for fabric and seam imperfections and then tested for leaks
![Page 16: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/16.jpg)
OUR IDEA
![Page 17: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/17.jpg)
CONCLUSION
• The market for airbags has reached the maturity level in the developed nations and has also been established in the developing nations like INDIA
• We as a Textile Technologists should contribute in development of such a products to make them economical for our nation.
![Page 18: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/18.jpg)
REFERENCES
• Mukhopadhyay S.K. and Patridge J.F., Automotive Textiles, Textile Progress, The Textile Institute, 29(172), 1997.
• Journal of COATED FABRICS, Jan 1995• S.Adanur, Wellington series "Handbook of industrial
textiles", Technomic publishing,1995Walter Fung And Mike Hardcastle ‘Textiles in automotive engineering’ Woodhead Publishing Limited
![Page 19: MANUFACTURING OF AIR BAGS](https://reader036.fdocuments.in/reader036/viewer/2022062522/5871bb031a28ab55058b57e5/html5/thumbnails/19.jpg)