Manufacturer of Quality Farm Equipment - Roll-A-Cone · 2 40 45 4 42 9 20 6 44 34 44 35 35 35 20 38...

Phone: 806-668-4722 Fax: 806-668-4725 Web Page: www.roll-a-cone.com E-mail: [email protected]

YOU ARE ALWAYS WELCOME AT

Roll-A-Cone Mfg. 7655 Roll-A-Cone Rd Tulia, TX 79088

Roll-A-Cone Mfg. Arial View

Manufacturer of Quality Farm Equipment

2

40

45

4

42

9

20

6

44

34

44

35

35

35

20

38

38

31

31

41

14

10

11

14

38

22

32

32

33

4

28

31

39

45

44

9

34

34

8

31

39

25,26,27

25

28,29,40

3

16

26,27

3

6

7

29

21

32

38,41

33,35,36

6

29

7

9

43,44

21

22

4

41

47

36,37,38

3

5,8

21

35

7

30

10-13

12

39

45,46

8

5

13

40

23,24

14

15,16

4

43

26,27

Shaper Rings...................................

Single Bar Frames...........................

Single Bar HD Frames....................

Sliding Fender.................................

Spacers............................................

Spider Diker....................................

S-Shank...........................................

S-Shank Clamp...............................

Spring Load Basket........................

Spring Tine Clamp..........................

Spring Tine Plow............................

Spring Tine Shank..........................

Squirrel Cage..................................

Stalk Cutter Units...........................

Stalk Puller Row………..…..

Straight Shank Cultivator...............

Straps..............................................

Stubble Mulcher Plow....................

Stubble Mulcher.............................

Stubble Mulcher Blades..................

Stubble Mulcher Frog....................

Subsoil 3-Pt Plow...........................

Subsoil Shank.................................

Sweep Buffer Wing……………….

Sweepmaster Plow..........................

Sweeps............................................

T-Bar Plow Frames.........................

Tipper..............................................

Tool Bar Spacers............................

Tool Bars & Tubing........................

Track Filler.....................................

Track Packer...................................

Transporting Equip.........................

Trash Whippers..............................

Treaders..........................................

Triple Bar Plow Frames..................

Truss Rods......................................

Turn Row Plow…………………..

U Bolts............................................

Wire Weeder...................................

9

10

11

39

17

6

29

26

33

26

3

29

35

17,18,19

30

8

22

5

28

43

39

6

28

42

2

43

12

43

16,17

22

8

9

21

35

33

10,11,12

14

5

22

34

SWEEPMASTER DRAG PLOW

• Available with Single or Double Fold Wings

• Available from 17 to 41 Shanks

• 100# Average Weight on Frame per Foot

• 4x7-3/8 Front Bar & 4x7-3/8 Center Bar

• 4x4-3/8 Rear Bar & 4x4-1/4 Head Bar

• 8000# 8-Hole Hubs on Hyd. Gauge Wheels

• 1-1/2”x2”x30” Shanks 55401

• Heavy 5-Bolt Clamps — No U Bolts

• 26” Sweeps on 20” Centers

• Wide Spaced Frame Measures 86” Front to Rear

•Available up to 72’

•Level Plow from Cab

4 Bar Hoeme.................................

A-Frame Hitches...........................

Angle Clamps...............................

Back Packer..................................

Badger 3-Pt Plow..........................

Badger Bedder..............................

Badger Claws................................

Bale Haulers.................................

Bale Prongs & Holders…...……..

Barring Off Disc...........................

Baskets..........................................

Bedder Buster 8-Row Plow……..

Bedder Buster Shank Assembly...

Bed Master....................................

Bed Roller.....................................

Blades...........................................

Camel Back...................................

Caps..............................................

Coulter Chopper.............................

Cone Guide Wheel........................

Corn Lifters...................................

Coulters.........................................

Crumbler.......................................

Cultivators....................................

Cylinders......................................

Dirt Pusher....................................

Disc Bedder..................................

Disc Bedder Rows........................

Double Bar Frames.......................

Double T-Bar Frame.....................

Fenders..........................................

Fertilizer Equipment.....................

Fertilizer Rig.................................

Field Cultivator.............................

Folding Plow Frames....................

Footpieces.....................................

Gauge Wheels...............................

Heavy Hinges...............................

Hitches..........................................

Hoeme 3-Pt Plow..........................

Hoeme Chisels.............................

Hoeme Shank Holders ............

Hoeme Shank..........................

Hoeme Shank Wear Shin........

Hook Badger Plow .................

Hub Assemblies.......................

Hydraulic Rod Weeder............

Hydraulic Row Markers .........

Inner Row Ripper ...................

Knife Attachment....................

Knife Heads ............................

Lister Bottoms ........................

Marker Disc Assembly ...........

Marker Tire .............................

Marker Wheel .........................

Markers ...................................

Maxi Picker.............................

Mini Picker..............................

Offbar………………………..

Peel Off Disc………………..

Planter Guide...........................

Plow Extensions......................

Plow Frames (4x4)..................

Plow Frames (4x7)..................

Plow Hydraulics......................

Plow Stands.............................

Pull Pins ..................................

Rake Attachments....................

Rakes w/ Baskets.....................

Rake Teeth ..............................

Razor Plow..............................

Razor Plow Shank...................

Rear Stabilizer ........................

Replacement Jacks .................

Replacement Points................

Replacement Shins .................

Rod Weeder.............................

Rod Weeder Attachments.......

Rod Weeder Knife Head.........

Roll-A-Picker .........................

Rolling Cultivator Gang…….

S Crank....................................

Shank Holders .........................

Shank Holder Ext...................

Shanks.....................................

3

4 BAR HOEME

BACK PACKER

• Available with Gooseneck Hitch on 35’ rig or Less

• 4900# 8 hole Hubs Standard

• Most Sizes Available

• Packer Units Individually Spring Loaded w/Rubber

Torsion Axle

• Each Packer Unit is Made of 1-3/4” Solid Square

Rolled on a Diamond with a 2” Solid Shaft and 2”

Pillar Block Bearing on Each End

• Right and Left Hand Coils

• Packer Units Weigh Approximately 100 #s Per

Foot (excluding plow frame)

• Superior Heavy Duty Design

• Heavy Hinges Standard on all Folding Packers

• Uses One Remote to Fold and Raise Plow

•Available up to 49’ Single Fold or 65’ Double Fold

•4 Bar Frame

•1st & 2nd Bar 4x7-3/8”

•3rd & 4th Bar on Center Section 4x4-3/8

•3rd & 4th Bar on Wings 4x4-1/4

•18” Sweeps on 12” Centers

•1-1/4x2 Hoeme Shank Standard

•8000# 8-Hole Hubs on Hyd. Gauge Wheels

•Plow Utilizes Side by Side Gauge Wheels with 12.5L 16

Flotation Tires


CRUMBLER

• Available with Gooseneck Hitch on 35’ rig or Less

• 4900# 8 hole Hubs Standard

• Most Sizes Available

• Crumbler Units Individually Spring Loaded w/

Rubber Torsion Axle

• Each Crumbler unit is Made with 7/8” Rod on outside

diameter with 2” shaft in center

• Crumbler unit is 18-1/2” Diameter

• Crumbler units weigh Approximately 60 #s Per Foot

(excluding plow frame)

• Heavy Duty Design with Heavy Duty Hinges

•Available up to 65’

• Heavy Duty 4-Bar Frame with

•Front Bar: 4x4x.375

•2nd Bar: 4x7x.375

•3rd, 4th, & Head Bar: 4x4x.250

• 8-Bolt 8000# Hubs on Dual Gauge Wheels

• 9” Sweeps on 6” Centers Standard


•18 Ply Tires Rated at 6000 Lbs. Used on Double Fold Plows

• Other options available

SPRING TINE

DRAG PLOW

4

•Available up to 45’ Width

• 4 Bar Frame

• 1st & 2nd Bars 4x7-3/8

• 3rd & 4th Bars 4x4-3/8

• 8000 # Hubs on Hyd. Gauge Wheels

• Level Plow from Cab\

• Shank Clamps Tie to Two Bars

• Shanks are 1-1/4” Thick w/32” Clearance

•18 Ply Tires Rated at 6000 Lbs. Available As Upgrade

RAZOR PLOW HOOK BADGER

DRAG PLOW

•Available with Single or Double Fold Wings

•Available with 9, 11, 15 or17 Shanks

•4x7-3/8 Front Bar & 4x7-3/8 2nd Bar

•4x4-3/8 3rd Bar & 4x4-3/8 Rear Bar

•4x4-1/4 Headbar

•8000# 8-Hole Hubs on Hyd. Gauge Wheels

•C-1060 Shank Mat. Mounts with 1” Bolts to 4x6x1/2 Angle

Iron Clamps

•Heavy Duty 5-Hole Swivel Coulter in Front of Each Shank

•Shanks on 44” Centers with 48” Blades 6” Mat.


•18 Ply Tires Rated at 6000 Lbs. Used on Double Fold Plows

Single Fold 11 Shank 40’ shown

• Standard 15-Shank 14’ Coulter Chopper

• 55401 Shanks 1-1/2x2 30” Clearance

• Heavy 5-Bolt Clamp — No U Bolts

• 8000# 8-Hole Hubs on Dual Gauge Wheels

• Spring Loaded Gang Coulter w/20” Blades

on 12” centers on Front

• 6 Blade Spring Loaded Heavy Duty

Stalk Cutter on Rear Bar

• 4-Bar Plow Frame w/4x7-3/8 1st & 2nd Bars and

4x4-3/8 3rd & 4th Bars with Double Head Bars


•Available with 5 Blade Stalk Cutters in Front

COULTER CHOPPER HOEME 3-POINT

Standard 21’ Rig

1 44321 21’ Plow Frame

21 H-26 1-1/4x2 Hoeme Shanks

26” Clearance

21 HSH-4 Shank Holders

2 G-446D Dual Gauge Wheels

Wide Spaced Frame Available

5

STUBBLE MULCHER

3-POINT PLOW

Standard 7-Shank Rig


7 SM-4 Stubble Mulchers

w/42” Blades

7 pr BSH-8XL Shank Holders

2 G-476D Dual Gauge Wheels

TURN ROW PLOW

• Available with Hydraulics for Simple Adjustment

• Available in 6’, 8’, and 10’ Sizes

• Double Basket with Peg Rake gives Superior Performance

• Shanks Spaced on 6” centers

• Available in Category 1, 2, and 3

• Spring Shanks with Spring Loaded Baskets

• See Roll-A-Cone or your Roll-A-Cone Dealer for more Information

6’ Plow with Turnbuckles 8’ Plow with Hydraulics

6’ Turn Row Plow Weighs 1300 Pounds



FIELD CULTIVATOR

Standard 21’ Rig


43 S-Shanks

43 SS-14 Shank Holders

2 G-446D Gauge Wheels

6

BADGER 3-POINT

PLOW

SUBSOIL SHANK

3-POINT PLOW

Standard 11-Shank Standard 7-Shank


11 Badgers

10 pr BSH-8XL Shank Holders Made out

of 4x4x1/2” Angle Iron

2 G-476DXL 678 Dual Gauge Wheels

1 47221 EB 21’ Plow Frame

7 Subsoil Shanks

7 pr BSH-8XL Heavy Shank Holders Made

out of 4x4x1/2” Angle Iron

2 G-476XL 678 Gauge Wheels

• Simple Depth Adjustment

• Heavy Duty

• Replaceable Hardfaced

Blades

• Simple Design for Easy

Bearing Replacement

• Each Wheel is Individually

Mounted Which Eliminates

Cross-Shafts Making Diking

In Taller Crops Possible

• Individual Mounting Makes

Changing to Skip-Row

Diking Simple

• Easily Adapts to All

Standard Bar Sizes

• All Parts May Be

Purchased Separately or

as a Complete Unit

SPIDER DIKER &

INNER ROW RIPPER

BEDDER BUSTER

• Heavy Duty Plow Frame

• 29” Clearance

• Clamps Tie to Both Bars for Superior Strength

• Clamps Available for Most Standard Bar Sizes

• Shank is Flame Cut Out of 1-1/4 Plate

• Uses Nichols N-346 Furrower with

15” Bottom and 17” Wing

• Uses Tipper for Furrower Support

• Rod Weeder Attachment Available

SHOWN: 8 ROW BEDDER BUSTER

7

DISC BEDDER

BADGER BEDDER

Standard 8-Row Standard 8-Row

Standard 6-Row Standard 12-Row

DISC BEDDER (SINGLE BAR)

DISC BEDDER (BED MASTER)


8 Rows Heavy Duty Double Disc Bedders

(18” & 20” or 20” & 22” Disc are available)

2 G-476XL OS 678 Gauge Wheels

1 47129 29’ Plow Frame W/ 7x4x3/8” Headbar

8 Rows Single Bar Heavy Duty Double Disc

Bedders (18” & 20” Disc are Standard)


1 4x7-3/8 Front Bar, 4sq. 3/8 Back Bar, 7x4-3/8 Head

Bar. Truss Rods.

12 Rows Bed Master Disc Bedder, Scallop Blades shown

2 G-476XLOS 678 Gauge Wheels

Same Bearings on Gauge Wheels, Stabilizer, and

Disc Bedder Units if Q-678 Hub is used

12 Dirt Shields

(Badgers Adjust 4 to 14” Deeper Than Disc)


6 Adjustable Height Hook Badgers — 1-1/4” Thick

6 pr BSH-8XL Heavy Shank Holders

2 G-476DXL 678 Dual Gauge Wheels

“Available with 6 rows of heavy duty double disc bedder or

with 6 rows of bed master disc bedders with 24” disc. Avail-

able with Hook Badgers or XL badger claw.

8

ROLL-A-PICKER (Bearing # 203KRR2)

STRAIGHT SHANK

CULTIVATOR

Standard 8-Row Rig


14 SK-2 w/FP-2 3/4x2-1/2 Shanks

2 SK-2 Offset with FP-2

16 SH-4x4-2 Shank Holders

9 SK-3w/FP-3 1x3 Shanks

9 R-443 Shank Holder/Replaceable Bolts


Wheels are on 3-1/2” Centers

20” Wheels with 16 Teeth per Wheel

Mounted on Heavy Duty 7x7x1/4” Bar

Available up to 60’

Rigid or Folding Frames Available

Each Wheel is Individually Mounted

And Spring Loaded

G-776 Standard w/9.5LTires

FERTILIZER RIG

1 44221 21’ Plow Frame 1 Connector Kit

13 AHSK-3 1x3 Fert. Shank 1 Metermatic

w/Manifold

13 R-443 Shank Holders 1 Metermatic Bracket

14 AH-172 Knives 1 Breakaway Bracket

2 G-446XLD 678 Dual Gw 1 Breakaway Coupler

1 Heavy Nurse Tank Hitch, Sliding

13 12’ Hose w/Barbs

TRACK FILLER


3 Rows Single Disc Bedder W/24” Disc

1 GW-50 Guide Wheel with Hydraulics

Bolt on Shanks and Spindles

Track packer available as attachment

(Shown on page 9)

Adds 570 lbs. 1690 lbs.

9

BED ROLLER HYDRAULIC ROD

WEEDER

Consists of:

Hydraulic Motor

Motor Mounting Bracket

1” Square to 1” Round Coupler

Extra Motor Seal

Hoses

1” Square Rod 3.4# per foot

Bearings & Flangettes

Bearing Brackets

Rod Retainers

6-R 30” 248 lbs.

6-R 40” 255 lbs.

8-R 30” 311 lbs.

8-R 40” 335 lbs.

Heavy 12-3/4” OD Pipe

.250 Wall Thickness

(Does not include frame or Shank Holders)

4-R w/154” Roller 493 lbs.

Pipe weight — 31 lbs. per foot

SHAPER RINGS FOR BED ROLLERS ABOVE

For Standard

12-3/4” O.D. Pipe

Weight 54 lbs. per pair

TRACK PACKER

Spring Loaded w/Rubber Torsion Axle

2-1/2’ wide coil

Adjustable Depth

Track Packer 570 lbs.

ROD WEEDER KNIFE

SLED

Available from 4 Row to 16 Row in any Width Rows

Heavy Duty Double Bar Clamp

Inline Hydraulic Drive

10

4 X 4 PLOW FRAMES

Priced With Hitch — Please Specify Category 2 or Category 3

SINGLE BARS Note: We are happy to build most special

sized frames. Please call for a price.

Cat. 2 Add 106 lbs. Cat. 3 Add 124 lbs.

Vertical Hitch Available

44114 8’8”Head Bar 14’4” Long 320 lbs.

44118 11’2” Head Bar 18’4” Long 399 lbs.

44121 14’4”HeadBar 21’4” Long 475 lbs.

44128 21’4”HeadBar 28’4”Long 669 lbs.

DOUBLE BARS Cat. 2 Add 140 lbs. Cat. 3 Add 200 lbs.

44214

44218

44221

44228

8’8” Head Bar

11’2” Head Bar

14’4” Head Bar

21’4” Head Bar

14’4” Long

18’4” Long

21’4” Long

28’4” Long

612 lbs.

740 lbs.

852 lbs.

1176 lbs.

TRIPLE BARS Cat. 2 Add 140 lbs. Cat. 3 Add 200 lbs.

44314

44318

44321

44328

8’8” Head Bar

11’2” Head Bar

14’4” Head Bar

21’4” Head Bar

14’4” Long

18’4” Long

21’4” Long

28’4” Long

878 lbs.

1055 lbs.

1203 lbs.

1649 lbs.

Standard Spacing

• 16” Between Bars

Wide Spaced


Standard Spacing


Wide Spaced


11

Priced with Hitch — Please Specify Category 2 or Category 3 — With 4x7x.375 Wall Front Bar

HEAVY DUTY PLOW FRAMES

SINGLE BARS Cat. 2 Add 118 lbs. Cat. 3 Add 144 lbs.

Also available with vertical hitch

DOUBLE BARS Cat. 2 Add 148 lbs. Cat. 3 Add 208 lbs.

TRIPLE BARS Cat. 2 Add 148 lbs. Cat. 3 Add 208 lbs.

47114 8’8” Head Bar 14’4” Long 502 lbs.

47118 11’2” Head Bar 18’4” Long 632 lbs.

47121 14’4” Head Bar 21’4” Long 742 lbs.

47128 21’4” Head Bar 28’4” Long 1029 lbs.

47214 8’8” Head Bar 14’4” Long 794 lbs.

47218 l1’2” Head Bar 18’4” Long 973 lbs.

47221 14’4” Head Bar 21’4” Long 1123 lbs.

47228 21’4” Head Bar 28’4” Long 1536 lbs.

47314 8’8” Head Bar 14’4” Long 1060 lbs.

47318 11’2” Head Bar 18’4” Long 1288 lbs.

47321 14’4” Head Bar 21’4” Long 1474 lbs.

47328 21’4” Head Bar 28’4” Long 2009 lbs.

Standard Spacing


Wide Spaced


Standard Spacing

• 13” Between Front Bars

• 16” Between Back Bars

Wide Spaced

• 17” Between Front Bars

• 20” Between Back Bars

12

47314T 8’8” Head Bar 14’4” Long 1204 lbs.




HEAVY DUTY TRIPLE BARS

HEAVY DUTY DOUBLE BARS

T-BAR PLOW FRAMES Prices with Hitch - Please Specify Category 2 or Category 3

STANDARD DOUBLE BARS All 4x4 Bars

20” Between Bars


STANDARD TRIPLE BARS

All 4x4 Bars

20” Between Bars






4x7x.375 Wall Front Bar

17” Between Bars






4x7x.375 Wall Front Bar

17” Between Front & Second Bar

20” Between Second & Third Bars






13

FOLDING PLOW FRAMES Prices with Hitch - Please Specify Category 2 or Category 3

NOTE:

Center Sections and

Wings can be used in

any combination

44214 with Hinges 14’4” Long Weight 900 lbs. 44242” Each Wing 42” Long Weight 275 lbs.




Center Sections

Head Bar Full Width

Pair of Wings

4x4 Double Bars

Standard Space 16” Between Bars

Wide Space

20” Between Bars

Frame shown above and Frames listed below are only a small fraction of the

Frames which are available. Please call us for quotes on any Frame not listed



44321 with Hinges 21’4” Long Weight 151l lbs. 44384” Each Wing 84” Long Weight 680 lbs.


4x4 Triple Bars

Standard Space 16” Between Bars

Wide Space

20” Between Bars



47221 with Hinges 21’4” Long Weight 1422# lbs. 47284” Each Wing 84” Long Weight 617 lbs.


Heavy Duty

Double Bars

(4x7x.375 Wall Front Bar)

Standard Space

13” Between Bars

Wide Space

17” Between Bars




47328 with Hinges 28’4” Long Weight 2305 lbs. 47396” Each Wing 96”Long Weight 995 lbs.

Heavy Duty Triple Bars

(4x7x.375 Wall Front Bar)

Standard Space

13” Between Front Bars

16” Between Back Bars

Wide Space

17” Between Front Bars

20” Between Back Bars

14

TRUSS RODS FOR PLOW FRAMES

Truss rods can be installed on any frame

for added strength. Call for quotes.

Consists of:

*4-1/2x36, 4x36” or 3x36” Cylinders

*Hoses Included

*Float Brackets

*Al1 Necessary Bolts and Pins

PLOW HYDRAULICS

HEAVY HINGES

These hinges have a 1-15/16” pin with

1x8” and 1x4” plates on front bar

and 3/4x6” and 1x4” plates with 1-15/16”

pins on back bars.

HD Hinge 94 lbs. Per Side

8” Extensions

12” Extensions

18” Extensions

24” Extensions

36” Extensions

Weight Per Pair 56 lbs.





PLOW EXTENSIONS

Floating Headbar Ears Allow Wing Flotation

HOW TO ORDER HINGES

1. Specify number of bars to be folded

(1,2,3,or 4 bars)

2. Specify vertical measurement of bars

(hinges available for 4” to 7” bar only)

3. Measure distance from front of front bar to

back of back bar

15

VERTICAL HITCH

DROP HITCH

WIDE HITCH

PLOW FRAME HITCHES

SINGLE BAR HITCH

DOUBLE BAR HITCH

Shown H-4412

Shown H-4422

Shown H-4423D

Shown H-4422V

These hitches comes in a variety of sizes.

Shown H-4423W

Please specify distance between bars

H-4422

H-4423

H-4722

H-4723

H-4422

H-4423

H-4722

H-4723

16” Between Bars—24” Overall Width








140 lbs.

200 lbs.

148 lbs.

208 lbs.

148 lbs.

212 lbs.

152 lbs.

216 lbs.

H-4412 106 lbs.

H-4413 124 lbs.

H-4712 118 lbs.

H-4713 144 lbs.

H-4413W 164 lbs.

H-4713W 168 lbs.

H-4423W 16” Between Bars—24” Overall Width 208 lbs.




This hitch will work on Category 3 Narrow

and Category 3 Wide

H-4422V 158 lbs.

H-4423V 160 lbs.

Please call us with your

special needs. H-4423D 212 lbs.

H-4723D 216 lbs.

HOW TO ORDER HITCHES

Please specify distance between bars

EXAMPLE: H -4 7 2 2

1. 1st number is vertical bar dimension

2. 2nd number is horizontal bar dimension

3. 3rd number tells 1 or 2 bar hitch

4. 4th number tells category 2, 3 or C for combination,

V for Vertical, W for Wide, SP for Spit, and D for Drop

16

A-FRAME HITCHES

Call Roll-A-Cone for

Any Special Hitches

QUICK HITCH For Square or Rectangular Bars

A-442 109 lbs.

A-443 127 lbs.

A-472 134 lbs.

A-473 160 lbs.

A-773 165 lbs.

COMBINATION HITCH Shown H-442C

H-442C 16” Between Bars—24” Overall Width 237 lbs.


H-442C 20” Between Bars—28”Overall Width 246 lbs.


HOW TO ORDER A-FRAME HITCHES

EXAMPLE: A-6 8 3

1. 1st number is vertical bar dimension

2. 2nd number is horizontal bar dimension

3 3rd number tells category 1, 2, or 3

SPLIT HITCH Split Hitches are Available in Single Bar, Double Bar,

And Vertical Hitches

H-4423 Split 16” Between Bars—24” Overall Width 278 lbs.

H-4423 Split 20” Between Bars—28” Overall Width 295 lbs.

QUICK HITCH For 2-1/4 Diamond Bar

A-103 QH-2 114 lbs.

A-103 QH-3 130 lbs.

17

For 4x4 or 4x7to 2-1/4 Diamond Bars

For 4” Square to 4” Square Bars

TOOL BAR SPACERS

For 2-1/4 Diamond Bars

Weight Centers

S-222 2 Bar 37 lbs. 22-3/16”

S-206 2Bar 19 lbs. 6”

This is a discontinued item so quantities are limited. Please call

for availability. All 2 bar spacers not available in this style are

available in tie rod type spacers shown to the right.

Distance Between

Weight the Bars

S-4x4-6 22 lbs. 6”

S-4x4-8 24 lbs. 8”

S-4x4-12 29 lbs. 12”

Distance Between

Weight the Bars

S-4x7-6 23 lbs. 6”

S-4x7-8 25 lbs. 8”

S-4x7-12 30 lbs. 12”

Distance Between

Weight The Bars

S-4x4-4x4-6 25 lbs. 6”

S-4x4-4x4-12 30 lbs. 12”

S-4x4-4x4-16 35 lbs. 16”

S-4x4-4x4-20 38 lbs. 20”

We have many more spacers not listed here.

Please call Roll-A-Cone or see your dealer for

any special tool bar spacers

Weight Centers

S-2-1/4x2-1/4-8 20 lbs. 8”

S-2-1/4x2/1/4-12 27 lbs. 12”

S-2-1/4x2-1/4-20 34 lbs. 20”

Many other sizes are available. Please call for sizes not listed.

18

SPRING LOADED UNITS

6 Blade 8 Blade

4’ 434 lbs. 480 lbs.

5’ 456 lbs. 504 lbs.

6’ 500 lbs. 564 lbs.

7’ 530 lbs. 598 lbs.

8’ 576 lbs. 658 lbs.

• Standard 7’ section

• Telescoping mounting arms

• Mounting arms are individually

spring loaded

• 1-7/16” chopper shaft

• Replaceable chopper blades

• Mounts to most standard bar

• Heavy duty flange mount ball

bearing NANFL2O7-23 R3

• 17” diameter

GANG STALK CUTTERS

6Blade 8 Blade

4’ 225 lbs. 271 lbs.

5’ 247 lbs. 295 lbs.

6’ 291 lbs. 355 lbs.

7’ 313 lbs. 381 lbs.

8’ 359 lbs. 441 lbs.

• 40” Rows have 70” blades

• 30” Rows have 50” blades

• 6-blade stalk cutter blades on

front bar

• 8-blade stalk cutter blades on

back bar

• 1-7/16” Chopper shaft

• 17” Diameter

• Bearing: NANFL2O7-23 R3

STALK CUTTER UNITS

RIGID MOUNT UNITS

• Standard 7’ section

• Mounted rigid on 1x3” shanks

• Replaceable chopper blades

• Heavy duty flange mount ball

bearing NANFL2O7-23 R3

• 17” Diameter

• Order clamps separately

6 Blade 8 Blade

4’ 225 lbs. 271 lbs.

5’ 247 lbs. 295 lbs.

6’ 291 lbs. 355 lbs.

7’ 313 lbs. 381 lbs.

8’ 359 lbs. 441 lbs.

19

SPRING LOADED ROW STALK

CUTTER Mounted on 1x3 w/Rubber Torsion Axle

ROW STALK CUTTERS

1-Row 6 Blade Stalk Cutter Shown

17” Diameter

Available with 12” or

18” Blade Length

1-7/16” Shaft

NANFL2O7-23 R3 Bearing

Available with 6 or 8 Blades

Mounted on 1x3 Shank

Order Shank Holder on Page 25

6 Blade 12” 130 lbs.


6 Blade 18” l50 lbs.


SHOWN: SC 1-R 6BLD 18”

OFFSET

1-Row 6 Blade Offset Shown

17” Diameter

Available with 12” or

18” Blade Length

1-7/16” Shaft




Shank is offset 3-1/2”






SHOWN: SC 1-R 6BLD OS 18”

1-Row 8 Blade Spring Loaded Stalk

Cutter Shown

17” Diameter

Available with 12” or 18”

Blade Length

1-7/16” Shaft prior to 2017

1-1/2” Shaft 2017 and on




Works as Centered or Offset

No Wear Joints

DOUBLE ROW STALK CUTTERS

Includes 1-6 blade and 1-8 blade unit

17” Diameter

Only Available with 18” Blade Length

1-7/16” Shaft

WPS-107-GRC Bearing

Fits Most Standard Double Bars

22” Clearance

SHOWN: 1-R 6&8 BLD SC 340 lbs.





SHOWN: SC 1-R 8BLD SLT

20

HYDRAULIC ROW MARKERS

STRAIGHT MARKER HM SERIES FOLDING

MARKER

OM SERIES FOLDING

MARKER M-7 & M-8 SERIES

FOLDING MARKER

• 3x6x10 Gauge main wings

• 1” Hinge pins

• Fits most standard tool bars

• Single acting cylinder or available with double

acting cylinder as single acting

• 3x8x10 Gauge main wings

• 1-1/4” Hinge pins

• Available with double or single acting cylinder


M-10 Min 5’ Max 13-1/2’ 332 lbs.

M-20 Min 9-1/2’ Max 19-1/2’ 396 lbs.

Measurements are from end of bar to disc

HM-00 Min 8-1/2’ Max11’ 536 lbs.

HM-0 Min 9-1/2’ Max13’ 554 lbs.

HM-1 Min 11-1/2’ Max17’ 590 lbs.

HM-2 Min 14-1/2’ Max21’ 626 lbs.

HM-3 Min 18-1/2’ Max25’ 661 lbs

• This marker folds over for better clearance

through gates, fences, etc.

• Safer transporting

• 3x8x10 Gauge main wing

• 1-1/4 Hinge pins

• Use only with double acting cylinder


• Simple, foolproof operation

• Highly successful marking disc

• Each wing uses one 2x16 cylinder

• Extreme rigidity with light weight

• Adaptable to almost any size toolbar

OM-00 Min 8-1/2’ Max 11’ 552 lbs.

OM-0 Min 9-1/2’ Max 13’ 570 lbs.

OM-1 Min 11-1/2’ Max 17’ 606 lbs.

OM-2 Min 14-1/2’ Max 21’ 650 lbs.

OM-3 Min 18-1/2’ Max 25’ 685 lbs.

OM-4 Min 20-1/2’ Max 27’ 700 lbs.

Measurements are from end of bar to disc

M-7 Min 8’ Max 14’ 584 lbs.

M-8 Min 10’8” Max 16’8” 624 lbs.

21

CYLINDERS 1 Bale Hauler Available Not Shown

TRANSPORTING EQUIPMENT

TRANSPORT WHEELS TRANSPORT TONGUE Used to transport plow end-ways. For Use with transport wheels

BALE HAULERS

2 BALE 3 BALE

1-15/16 Cold Rolled Prongs

Prongs Mounted on 2x4x.375 wall Tubing

Replaceable 58” Long Prongs

l0’4” Wide Frame

Bolt on Hitch

1-15/16 Cold Rolled Prongs

Prongs mounted on 2x4x.375 wall Tubing

Replaceable 58” Long Prongs

18’ Wide Frame

Bolt on Hitch

5-Bolt 2-Bar 174 lbs.

5-Bolt 3-Bar 192 lbs.

Trans Tongue Sgl Bar Specify Bar Size 84 lbs.

Trans Tongue Fits our plow frame 84 lbs.

We Stock a Wide Variety of

Cylinders From 2x8” (Shown) to

4-1/2x36” Including Many Rephase

Cylinders from 3-1/4x10” to 5x16”.

•82” Tall & 96” Wide

•33’ Long

•Wheel base centers 9’8”

•Axel is Front to Rear Adjustable

•Heavy duty 4900# 8-hole hubs

•New Cargo tires

•Hoist not included

•Available with goose neck hitch

•Available with hydraulic lift

•Shippable

CAMEL BACK Equipment Transportation Trailer

1 Bale Hauler Weighs 465 Pounds



22

ACCESSORIES TOOL BARS AND TUBING STRAPS

PULL PINS

CAPS

Weight

Per Foot

2-1/4x2-1/4 Solid 17.21#

2-l/2x2- 1/2x.250 7.l#

4x4x.250 12.51#

4x7x.250 18.8#

4x4x.375 17.27#

4x7x.375 24.9#

6x8x.375 33.3#

7x7x.375 33.3#

4” 3/4” Hole 5/8x2 Material

4” 1” Hole 5/8x3 Material

5” 1” Hole 5/8x2-1/2 Material





Please call us for any special pull pins

Wt 2#

Wt2.5#

Wt 3#

Wt 3#

Wt 5#

Wt 3.5#

Wt 7#

Size

3/4x5”

7/8x4- 1/2”

1x5”

l-1/8x5-1/2”

1-1/4x4- 1/2”

1-7/16x6-1/2”

1-7/16x 1-1/8x9-3/4”

Category

1

1

2

2

3

3

2&3

Position Weight

Top 1 lbs.

Bottom 1.5 lbs.

Top 2 lbs.

Bottom 2.5 lbs.

Top 2.5 lbs.

Bottom 5 lbs.

Combination Bottom 5.5 lbs.

U-BOLTS

We Stock a Variety of U-Bolts and Can

Make Many More to Your Specks.

SHOWN: 4” U-Bolt 6-1/2” Leg 3/4 Material

23

G-3 LIGHT DUTY

With Replaceable Spindle

GAUGE WHEELS

LIGHT DUTY

STANDARD

SHOWN: G-446

Consists of:

• 15x4-1/2” x 4-Hole Rim

• 4-Hole Hubs Rated at 1500 lbs. Capacity

• 5” Bolt Circle & 3.62” Pilot

• Axle made of 2x4x1/4” Wall Tubing

•Mounting Bracket is made of

3X3X1/2” Angle Iron

•Replacable Spindle

•Vertical Adjustment

Consists of:

•This Gauge Wheel will work with Q-719, Q-888, Q-783 Hubs

•Please see Page 42 for Hub Ratings and Descriptions

•Axle made of 2x4x1/4” wall tubing

•Mounting bracket made of 3x3x-1/2” angle iron

•15x5”x5-hole or 15x6”x6-hole wheel Standard

•6-hole 8” wide wheel also available

•Available with 2x4 axle extended 6”

•Replaceable Spindle


•Can be ordered as a Single or Dual Gauge Wheel

•Heavy 5-bolt Single 132 lbs. Heavy 5-bolt Dual 169 lbs.

•Heavy 6-bolt Single 134 lbs. Heavy 6-bolt Dual 173 lbs.

* Specify 15” or 16” Wheel

Single 89 lbs.

SHOWN: G-444

How to Order Gauge Wheels Example: G-4 7 6 D XL

1. 1st number is vertical bar size

2. 2nd number is horizontal bar size

3. 3rd number is the hub size (4, 5, 6 or 8 hole)

4. Add D for Dual

5. Add XL for Heavy Gauge Wheel

6: Add SD for Super Duty 8 Hole

7. Add OS for Offset

8. Pease see page 42 for Hub Description and Ratings

Consists of:

• 4.00x9 or 6.00x9 tire & tube

• 5-Hole, 4-1/2” bolt circle

• 3.28” Pilot hub rated at 1750 lbs.

• Spindle mounted on

1”x3”x30” shank

G-3 Weight 58 lbs.

G-3D (Dual) Weight 73 lbs.

HEAVY DUTY OFFSET With Replaceable Spindle

Add XL OS When Ordering This Gauge Wheel

SHOWN: G-446XLOS

Same as G-446XL

(on page 24) except

•4x4x1/4” tubing

offset to one side



•6-Hole Gauge Wheel

Available with Q-719,

Q-888, Q-783, Q-678,

Hub

•See page 42 for Hub

Ratings & Descriptions

•6” or 8” wheel available

G-6 LIGHT DUTY

• Available in 6 hole w/20.5 x 8 –10 Tire

• 6-Hole, Q-888, or Q-783 Hub

• Slide in Spindle mounted on

1”x3”x30” shank

G-6 Weight 64 lbs.

24

GAUGE WHEELS

HEAVY DUTY With Replaceable Spindle

Add XL When Ordering This Gauge Wheel

SHOWN: G-446XL

Consists of:

•5 or 6-bolt hubs


•Mounting bracket made of 4x4x1/2” angle iron

•5 or 6 Hole Wheel (6-Hole Wheels Available in 6” or 8” Wide)

•Available Hubs:Q-791, Q-888, Q-783, Q-678

•Please see Page 42 for Hub Ratings and Descriptions

•16x6”x 6-hole wheel also available

•Available with 4x4 axle extended 6”



* Specify on 6-hole wheel: 6” or 8” wide

XL 5-Bolt Single Wt 160#

XL 5-Bolt Dual Wt 196#

XL 6-Bolt Single Wt 170#

XL 6-Bolt Dual Wt 225#

HEAVY DUTY WIDE With Replaceable Spindle

Add DXLW When Ordering This Gauge Wheel

SHOWN: G-446DXLW

Same as G-446DXL except

•Extra wide tire centers

•Specify tire centers

when ordering (40” or 30”)

•Specify 15” or 16” Wheel

•Specify 6” or 8” Wheel

G-446DXLW 200 lbs.

SUPER DUTY

SHOWN: G-448SD

• Axle made of 4x7x.375 wall tubing

• Mounting brackets made of 4x4x1/2 Angle

• Available with 15x6 or 16x6 or 16x10 wheel

• Q-778 8-Hole hub rated at 4900 lbs.

• 6” Pilot with 8” bolt circle

• Replaceable Spindle

• Vertical Adjustment

STANDARD DUTY EXTENDED With Replaceable Spindle

Add EXT. ARM 48” CU When Ordering This Gauge Wheel

(For Use With Hooded Sprayer)

SHOWN: G-446 EXT ARM 48” CU

• Consists of:

• 5 or 6 bolt hubs


•Available with 2x4 straight or curved down as shown

• Mounting bracket made of 3x3x-1/2” angle iron

• 15x5”x5-hole or 15x6”x6-hole wheel Std

• Available Hubs: Q-719, Q-888, Q-783

• See Page 42 for Hub Ratings and Descriptions •6-hole 8” wide wheel also available



Heavy 5-bolt Single 155 lbs.

Heavy 6-bolt Single 163 lbs.

* Specify 15” or 16” Wheel

With Replaceable Spindle

G-448SD 230 lbs.

25

For Square or Rectangular Bar

Available for 1-1/4x3, 1x3, 3/4x2-1/2, or 5/8x2 Shanks

30 lbs.

34 lbs.

32 lbs.

36 lbs.

For 2-1/4” Diamond Bar

SH-3 Ext 8”

SH-3 Ext 12”

32 lbs.

35 lbs.

SHANK HOLDER EXTENSIONS

1x3 Pocket with Set Screws and Plate

For Use With John Deere Flex Planter

SHANK HOLDERS


SH-4x4-1

SH-4x4-2

SH-4x4-3

SH-4x7- 1

SH-4x7-2

SH-4x7-3

SH-4x7-4

14 lbs.

16 lbs.

19 lbs.

15 lbs.

18 lbs.

20 lbs.

25 lbs.

SH-5x7-2

SH-5x7-3

SH-6x8-2

SH-6x8-3

SH-7x7-2

SH-7x7-3

SH-7x5-2

SH-7x5-3

17 lbs.

21 lbs.

20 lbs.

25 lbs.

21 lbs.

25 lbs.

20 lbs.

24 lbs.

How to Order Shank Holders

Example: SH- 6 8 3 Shank Size

1=5/8x2”

2=3/4x2-1/2”

3=1x3”

4=1-1/4x3

5=1x4

6=1-1/2x3

7=1-1/4x4

1. lst number is vertical bar size

2. 2nd number is horizontal bar size

3. 3rd number is shank size

(Refer to chart at right)


WITH REPLACEABLE BOLTS

R-443

R-444

R-463

R-473

R-474

R-5734

R-6434

R-6634

R-6834

R-7534

R-7434

R-7734

1x7 Bolts

1-1/8x7-1/2 Bolts

1x9 Bolts

lxl0 Bolts

1-1/8x10-1/2 Bolts

lxl0 Bolts

1x7 Bolts

1x9 Bolts

lx11 Bolts

1x8 Bolts

1x7 Bolts

lxl0 Bolts

28 lbs.

34 lbs.

29 lbs.

29 lbs.

36 lbs.

28 lbs.

32 lbs.

33 lbs.

34 lbs.

40 lbs.

40 lbs.

41 lbs.

SH-7x7 EXT. 3-5FP 37 lbs.

1x3 Pocket 9 lbs.

1-1/4x3 Pocket 9 lbs.

1x3 Pocket 10 lbs.

1-1/4x3 Pocket 10 lbs.

1x3 Pocket with Set Screws and End Caps

SH-4x4 Ext. 3-8”

SH-4x4 Ext. 3-12”

SH-4x7 Ext. 3-8”

SH-4x7 Ext. 3-12”

Extensions for other bar sizes also available

26

HOEME SHANK HOLDERS

SPRING SHANK CLAMPS

AC-3-4x4

AC-3-4x7

AC-3-5x7

28 lbs.

29 lbs.

30 lbs.

AC-3 7x5

AC-3 7x7

AC-3 6x8

32 lbs.

33 lbs.

32 lbs.

ANGLE CLAMPS FOR 1X3 SHANKS

AC-3-2-1/4 Diamond

AC-3-4x4 Diamond

30 lbs.

30 lbs.

For 2-1/4” or 4” Diamond Bar

Please Specify Bar Size


SPRING TINE CLAMP SPRING SHANK CLAMP

For 4x4 Bar

SS-14 5 lbs.

8 lbs.

8.5 lbs.

STC-44

STC-47

For 2-1/4 Diamond Bar Standard for 4x4 or 4x7 Bars

HSH-1 l0 lbs.

Uses 1 7/8x7-1/2 Bolt

Uses 2 5/8x7-1/2 Bolts

HSH-4x4

HSH-4x7 12 lbs.

15 lbs.

HDH-4x4

HDH-4x7

21 lbs.

27 lbs.

Uses: 4 - 3/4x9-1/2” Bolts

1 - 5/8x3-1/2” Bolts

Heavy Duty for 4x4 or 4x7 Bar

SH-101 5/8x2” Shank

SH-22 3/4x2-1/2” Shank

SH-33 1x3”Shank

SH-44 1-1/4x3” Shank

12 lbs.

11 lbs.

15 lbs.

16 lbs.

SHANK HOLDERS For 2-1/4” Diamond Bar For 3-1/2” to 4” Diamond Bar

SH-101-1/2 5/8x2” Shank

SH-22-1/2 3/4x2-1/2” Shank

SH-33-1/2 1x3” Shank

SH-44-1/2 1-1/4x3” Shank

15 lbs.

14 lbs.

18 lbs.

18 lbs.

27

Holders for Hook Badgers with 1” Holes and Razor Shank Please Specify Bar Sizes and Spacing

Extra Heavy Duty Holder

BSH-8-4x6-27” (Fits Bars 24” Overall Width) 92 lbs.

BSH-8-4x6-31” (Fits Bars 28” Overall Width) 102 lbs.

4x6x1/2 Angles W/Bolts & Caps

Holder Uses 3/4” Bolts to Bolt Angles to the Bar

Holder Uses 1” Bolts to Bolt Shank to Angles

Please Specify Bar Sizes and Spacing

Standard Holders

BSH-8-3x3-27” (Fits bars 24” overall width) 82 lbs.



Uses 3/4” bolts to mount angles to bar

Uses 3/4” bolts to mount shank to angles

Heavy Duty Holders




Uses 3/4” bolts to mount angles to bar

Uses 3/4” bolts to mount shank to angles

Holders for Stubble Mulchers, Badgers,

Hook Badgers and Subsoil Shanks

HOEME SHANK HOLDERS Spring Loaded

SHSH-1

SHSH-4x4

SHSH-4x7

SHSH-5x7

SHSH-7x7

Fits 2-1/4 Diamond Bar

Fits 4” Square Bar

Fits 4x7 Bar

Fits 5x7 Bar

Fits 7x7 Bar

67 lbs.

61 lbs.

62 lbs.

64 lbs.

65 lbs.

SHSHHD-4X4

SHSHHD-4X7

SHSHHD-7x7


Fits 4x7 Bar


90 lbs.

91 lbs.

90 lbs.

•Fits 4” Square, 4x7,

or 7” Square Bar

•1200 lbs. of

Trip Force

•Super Heavy

Duty Design

•1-1/4” Bolts

•Heavy Duty Cast Cap

•Uncompressed Spring

is 12”x 3-7/8” O.D. x

2-5/8” I.D. w/5/8”

wire

•Fits a Wide Variety of

Bar Sizes

•650 lbs. of Trip Force

•1” Bolts

•Uncompressed spring

Is 14-1/2” x 3-1/2 O.D.

x 2-1/2 I.D. w/9/16”

wire

28

Razor Plow Shank

PLOW TOOLS Stubble Mulcher

Use clamp on Page 27

Stubble Mulcher For 2-1/4 Diamond Bar

SM-4

SM-4

W/36” Blade

W/42” Blade

95 lbs.

98 lbs.

SM-1

SM-1

W/36” Blade

W/42” Blade

123 lbs.

126 lbs.

RAZOR SHANK W/48” Blade 160 lbs.

Use BSH-8 XL on Page 27 Subsoil Shanks

SUB 84 lbs.

1” Thick Shank w/32” Clearance

Replaceable Points and Shin on Page 44,45

Use with BSH-8XL on Page 27

Use BSH-8-4x6 Angle clamp

Shown on page 26

1-1/4” x 8” Shank

Specify bar size and

distance between bars

Ripper Shank

SK-3RP 42 lbs.

SK-4RP 54 lbs.

SK-3RP shank is 1x3”— 36” overall length

SK-4RP shank is l-1/4x3”—40” overall length

Replaceable points &shins on page 44,45

Ripper Shank Available With Fertilizer Tube

SK-3RPF 42 lbs.

SK-4RPF 54 lbs.

SK-5RPF 53 lbs.

Sk-7RPF 63 lbs.

SK-3RPF shank is 1x3”— 38” overall length

SK-4RPF shank is l-1/4x3”—38” overall length

SK-5RPF shank is 1x4” —38” overall length

SK-7RPF shank is 1-1/4x4” —38” overall length

Available with or without Fertilizer Tubes

Replaceable points &shins on page 44,45

29

• 29” Clearance

• 7-1/4” Wide Mounting Bracket

for Superior Strength

• All Mounting Bolts are Standard 1” Grade 2

Bolts that are Widely Available

• Universal Mounting Bracket fits

Most Standard Bar Sizes

• Shank is Flame Cut Out of 1-1/4 Plate

• Uses Nichols N-346 Furrower with

15” Bottom and 17” Wing

• Uses Tripper for Furrower Support

• Rod Weeder Attachment Available

• Made in the U.S.A

SHOWN: BB-1 124 lbs.

Hook Badger

Hook Badger 102 lbs.

1-1/4” Shank with 32” Clearance

Available Drilled w/1” or 3/4” Holes

Replacement Points and Shin on Page 44,45

Use with BSH-8XL on Page 27

Adjustable Shank Available

PLOW TOOLS

SPRING SHANKS S-Shanks

Field Cultivator

Shanks Also Fits Crustbuster, Noble, & others

7/16x1-3/4” material

S-450 shank has 18” clearance 8 lbs.

Order Clamp From Page 26

Replacement tips on Page 43

Spring Tine

2 piece shank with 24” clearance

Shank is made of 1-3/4x5/8 material and

Spring is made of 1/2x3 material.

RC 1200 Shank 8 lbs.

RC 14751 Spring 14 lbs.

Order Clamp From Page 26

Shank Also fits other brands

BAD 62 lbs.

1” Thick Shank w/26” Clearance

Replaceable points on page 45

Use BSH-8 or BSH-8XL

XL Badger Claw

BAD XL (1” Thick) 94 lbs.

BAD XXL (1-1/4” Thick) 125 lbs.

32” Clearance

Replaceable points & shins

on page 44,45

Use BSH-8 or BSH-8XL Clamp

Adjustable Badger Claw Available

with 10” of depth adjustment

Available drilled for Big Ox Clamp

Badger Claws

Available w/ Double Bar Clamp BB-2

Bedder Buster

30

ATTACHMENTS

Bed Master Disc Bedder Row

24” Cupped Disc Standard on 40”, 38”, &36” rows

22” Cupped Disc Standard on 30” rows

Discs are Available in Smooth or Notched

Large Greasable Tapered Roller Bearings

Shank Mounted Behind Disc for Superior Trash Clearance

Angled Shank with Tilted Disc

Disk Easy to Replace

Small Bearing # 25877

Large Bearing # 25590

Small Race # 25821

Large Race # 25520

Seal # 20148

1 Row Bed Master Disc Bedder 228 lbs.

18” & 20” Cupped Discs

1-1/8 Square Shaft

Sealed Bearings

No Rights or Lefts on

any Part of Disc Bedder Row

Bearing # DC 208 TT5

1 Row NB Double Disc Bedder 252 lbs.

Heavy Duty Double

Disc Bedder Row

20” & 22” Cupped Discs

Notched Disc are Available

1-1/2 Square Shaft

Sealed Bearings

No Rights or Lefts on

any Part of Disc Bedder Row

Bearing # DC 211 TT5

1 Row HNB Heavy Duty

Double Disc Bedder 286 lbs.

Double Disc Bedder Row

28” Disc w/Welded Cleats


Clamp Included (specify bar size)

Slide in Spindle

Disc Easy to Replace



Small Race # 25821

Large Race # 25520

Seal # 20148

1 Row Root Rooter 245 lbs.

Root Rooter Row

31

Offbar Stabilizer Spring

Attachment Kit

Attaches on

ST-446

STSA-1 21 lbs.

ATTACHMENTS

Peel Off Disc Rolling Cultivator Gang

24” Disc


Clamp Not Included

SK-4 20” 1-1/4X3” Shank included

Slide in Spindle

Heavy Duty Hub

Disc Easy to Replace

Uses 5/8” Bolts to Attach to Shank

Adjustable Angle

Left & Right Side Price Separately



Small Race # 25821

Large Race # 25520

Seal # 20148

Weight 183 lbs.

16” 5 Spider Gang w/Hardfaced Teeth

Right & Left Hand Gangs Available

Replaces Lilliston Rolling Cultivator Gang

Ag Smart Brand

H165LH

H165RH 62 lbs.

ST-446 26 678 170 lbs.

Please Specify Tool Bar Size

4x4x1/4 44” Long

Available Extended 12” or 20”

5-Hole Available with 22”, 24” or 26” Blade

6-Hole Available with 22”, 24”, 26” or 28”

Blade

Available Hubs: Q-719, Q-888, Q-783, Q-678

Q-783 or Q-678 Recommended for this Coul-

ter

See Page 42 for Hub Ratings

Works Well on Listers, Planters and Cultivators

Will Also Work on Deep Furrows

This will work as an offset.

Rear Stabilizer

• 1-1/4 x 3 Shank

• Two 1-1/8 Bearings

#DC208TT5

• Adjustable Angle

• Available with or without

discs

• 18” or 20” Disc are

available

• 1 Row Includes a left and

right hand gang

Offbar Row 250 lbs.

32

Bale Prongs Holders Sold Separately

Roll-A-Cone Prong is Made out of 1-15/16” 1018 Cold Roll Shaft & is 58” Long

Forged Prong w/Hole in End is Made out of 1-5/8” Forged Steel & is 47” Long

Forged Prong w/Tapered End is Made out of 1-3/4” Forged Steel & is 49.5” Long

Rake Attachments

16” & 32” Extensions Available

Double Arms

Recommended

6’8” & Longer

Teeth are made of 7/16” spring wire

Available Lengths 2 Bar 3 Bar

Weight Weight

5’4”

6’8”

8’

9’4”

10’8”

12’

13’4”

14’8”

226 lbs.

252 lbs.

274 lbs.

296 lbs.

312 lbs.

336 lbs.

352 lbs.

260 lbs.

296 lbs.

328 lbs.

358 lbs.

382 lbs.

416 lbs.

440 lbs.

484 LBS

ATTACHMENTS

FEATURES

•Heavy Duty Spring

Loaded Mounting Arms

•Baskets Adjust Separately from rakes

•Simple Turnbuckle Adjustment

on Rakes and Baskets

•1-7/16 Pillar Block Bearings

•Provides Smoother Finish than Rakes Alone

•Helps Break Clods and

Conserve Moisture

•Fits Most Brands of Implement (Specify Bar Size)

AVAILABLE

SIZES 5’4”

6’8”

8’

9’4”

10’8”

12’

13’4”

Rakes With Baskets

33

(Bearing FD209RA)

Wheels can be

replaced individually

5’ Treader

6’ Treader

7’ Treader

8’ Treader

9’ Treader

10’ Treader

388 lbs.

426 lbs.

458 lbs.

490 lbs.

520 lbs.

554 lbs.

ATTACHMENTS

Rotary Treaders

Spring Loaded Baskets

• Heavy Duty Spring Loaded Mounting Arms

• 1-7/16 Pillar Block Bearings

• Simple Turnbuckle Adjustment

• Helps Break Clods and Conserve Moisture

• Fits Most Brands of Implement

• Specify Bar Size

AVAILABLE

SIZES

5’ 400 lbs.

6’4” 435 lbs.

7’8” 470 lbs.

9’ 505 lbs.

10’4” 540 lbs.

11’8” 570 lbs.

13” 610 lbs.

R-501T Rake Teeth NGH-17 Rake Teeth RK-2 Rake Teeth

•19” Overall Length

•Clamp Sold Separately

•7/16” Wire

R-501T 3.5 lbs.

•19” Overall Length.


•3/8” Wire

NGH-17 2.75 lbs.

•19” Overall Length


•3/8” Wire

RK-2 2.75 lbs.

34

ATTACHMENTS

Rod Weeder Attachment

Bracket For Bedder Buster

•Attaches to Bedder Buster or Other

High Clearance Lister Shanks

•Slotted to Allow Variable

Depth Adjustment

BBRW-1 9 lbs.

Rod Weeder Motor

Hanger Bracket

•Allows Hydraulic Motor to be

Ran Inline with Rod Weeder Rod

•Mounts on a 1x3 Shank

•Available in a Right Hand or Left

Hand Mount

•Motor Mount Plate Sold

Separately

NRW-18 27 lbs.

Rod Weeder Motor Hanger

Bracket 12” Extension

Rod Weeder Bearing Bracket

•Used to Mount Rod Weeder Rod

to 1x3 Shank

•Can be Used Inline with NRW-18

Motor Hanger Bracket

RW-8 19 lbs.

• Places the Rod Weeder

Rod Approximately

12” from Rear of 1x3

Shank

• Motor Mount Plate

Sold Separately

NRW-18B 39 lbs.

Rake Extension

Available in 1 Tooth

and 2 Tooth extensions

1 Tooth 19 lbs.

2 Tooth 25 lbs.

Wire Weeder

Mounting Bracket

Not Available

Rights and Lefts

Wire Weeder Pair 1 lbs.

Rod Weeder Knife Head

Used to Adapt BS-28

Knives To Rod Weeder

Will Fit 1x3 Shank or

1-1/4x3 Shank

KHRW-1 Large 38 lbs.

KHRW-2 Small 26 lbs.

Knife Heads

Used to Adapt

BS-28 Knives

To Straight

Shanks

KH-3 Fits 1x3 Shank

KH-4 Fits 1-1/4x3 Shank

22 lbs.

23 lbs.

BKH-1

BKH-2

BKH-1 Offset

BKH-2 Offset

12 lbs.

16 lbs.

12 lbs.

16 lbs.

Beet Knife Holders

5/8x2” Shank

3/4x2-1/2” Shank

5/8x2” Shank

3/4x2-1/2” Shank

Large Shown

35

Squirrel Cages

SQ CAGE 110 lbs.

• Used for bed firming

Before planting.

• 15” Width

• 12” Diameter

• 37-1/2” Circumference

• Bearing: NPS 100 RP

Single Basket on 1x3 Shank Spring Loaded on Rubber Torsion Axle

•Mounts to Bar with 1x3 Shank Holder

•Available with 15” or 19” Slats

•33” Circumference

•SA208-20 Bearing

•Available with Squirrel Cage •No Wear Points

•1-1/4” Shaft

SINGLE BASKET

15” SLT 59 lbs.

ATTACHMENTS Rod Weeder Bearing Bracket

12” Extension

•Rod Weeder Bearing

Bracket Extended

12” Behind Rear

of Shank

•Used with 12”

Extended Motor

Hanger Bracket

RW-8B 23 lbs.

• Mounted on

3/4x2-1/2 Shank

• 20” Wide, 8” Tall Wings

Dirt Pusher

DIRT PUSHER 24 lbs.

Marker Disc Assembly

Marker Gauge Wheel

•Mounted on 1” Shaft

•Disc Measures 12” Diameter

•Used on All

Roll-A-Cone Markers

•Bearing: 205PP11 or NCP100RPC

MP-12 15 lbs.

• Use Clamp SH-2x2-1 to

Mount tire on marker

•Light duty tire wheel

& hub mounted on

5/8x2 Shank

• 4.80x8 Tubeless Tire

Marker Wheel •Acts as a Small Gauge

Wheel to relieve strain

• Uses same clamps as

Disc assembly

•This Tire Measures 14” Diameter

By 2” Wide V Shaped

•Also makes a mark

• Mounted on 1” shaft

Bearing: 205PP11 or NCP100RPC

MP-12W 16 lbs.

G-5 26 lbs.

Trash Whipper

•3/4 x 2-1/2” Shank 26” Long

•205PP11 Triple Seal Bearings

•Order Clamp from Page 25

Sk-2 TW 37 lbs.

36

Single Curved Basket Single Rubber Torsion Basket

ATTACHMENTS Single Baskets Double Baskets

SINGLE BASKET 96 lbs.

Baskets are used for incorporating and bed firming before planting

12”, 15” or 19” Blades— 10-1/2 Diameter— 33” Circumference

Bearings: NPS 100 RP

The Single Basket has The Double Basket has

27” of Clearance from 16” of Clearance from

The Back of the Bar the Back of the Bar to

To the Front of the Basket the Front of the Basket

•10-1/2” Diameter

•33” Circumference

•12” Curved Blades

•Adjustable Height

•NPS 100 RP Bearings

•Great for Strip Till

Single Curved Basket 90 lbs.

DOUBLE BASKET 138 lbs.

Curved Shank Adjustable Spindle Ridged Coulter

• Complete with 17 or 20” Blade

• Q 719 5-Bolt Hub (see page 42 for Specs.)

• 30” 1x3” Shank

• Adjustable Offset

• Order Clamp from Page 25

SK-3C-A 5-Hole 17” 53 lbs.

SK-3C-A 5-Hole 20” 59 lbs.

• Single curved lx3” shank

• 5-Bolt hub rated at 2760 lbs.

• 5-1/2” Bolt circle, 4” pilot

• Can be used for Gauge

Wheel, Coulter or Stabilizer

SK-3C Weight 48 lbs.

CURVED SHANK

Consists of:

• 14” Diameter Basket

• Spring Loaded w/Rubber Torsion Axle

• Can be used as Offset

• 1-1/4” Flange Bearing #FTFH206-20

• Adjust Height w/Turnbuckle

• 24” & 42” Extension Available

Basket SLT 15 EXT 24 130 lbs.

37

Straight Shank Adjustable Spindle Ridged Coulter

Offset Shank Spring Loaded Swivel Coulter

Straight Shank Angle Shaft Spring Loaded Swivel Coulter

CBS-1SSLA 4-Hole 17” 57 lbs.



CBS-1SSL Offset 4-Hole 17” 65 lbs.



ATTACHMENTS

Straight Shank Angle Shaft Swivel Coulter

CBS-1SA 4-Hole 17” 49 lbs.

CBS-1SA 5-Hole 20” 75 lbs.

Offset Shank Swivel Coulter


• Q 719 5-Bolt Hub (see page 42

for Specs.)

• 20” 1x3” Shank

• Clamp Not Included

Order Clamp from Page 25


• Q 719 5-Bolt Hub

(see page 42 for Specs.)

• 20” 1x3” Shank



CBS-1S Offset 4-Hole 17” 57 lbs.

CBS-1S Offset 5-Hole 20” 84 lbs.




• 20” 1x3” Shank






• 20” 1x3” Shank

• Clamp not Included

Order from Page 25

CBS-1SSLF 5-Hole 17” 94 lbs.

CBS-1SSLF 5-Hole 20” 100 lbs.

Spring Loaded Swivel Coulter

With Fertilizer Knife Shown with back swept knife




• 20” 1x3” Shank

• Order Clamp from Page 25

• Order with Back Swept

or Forward Swept Knife



for Specs.)

• 30” 1x3” Shank

• Adjustable Offset

• Order Clamp from page 25

CBS-1 ADJ 5-Hole 17” 52 lbs.

CBS-1 ADJ 5-Hole 20” 58 lbs.

38

ATTACHMENTS

Straight Shank Angle Clamp Swivel Coulter

• Mounted On 1x3 Shank

• Uses Angle Clamp

(Not Included)

• Available with 4 Hole or

5 Hole Hub

Complete with

17” or 20” Blade

CBS-1S 4-Hole 17” Wt 49#

CBS-1S 5-Hole 20” Wt 75#

Order Shank Holder From Page 26

Straight Shank Angle Clamp Spring Loaded Swivel Coulter

• Mounted On 1x3 Shank

• Uses Angle Clamp

(Not Included)

• Available with 4 Hole or

5 Hole Hub

Complete with

17” or 20” Blade

CBS-1SSL 4-Hole 17” Wt 57#

CBS-1SSL 5-Hole 20” Wt 80#

Order Shank Holder From Page 26

Single Plow Stands Double Plow Stands

• 2x2x.188 wall Tube is 48” Long

• Clamp is included


• Can be Raised and Pined out of

the way when not in use

• Adjustable Height

Single Plow Stand Wt 34#

• 2x2x.188 wall Tube is 48” Long

• Great for Single Bar Plows


• Can be Raised and Pined out of

the way when not in use

• Adjustable Height

Double Plow Stand Wt 70#

CBS-1 4-Hole 17” 48 lbs.






for Specs.)

• 30” 1x3” Shank

• 7” Offset from Shank to Blade

• Clamp not Included Order from Page 25

Straight Shank Welded Spindle Ridged Coulter

Barring Off Disc

14” Disc

Greasable Hub with Tappered

Roller Bearings

VDH-1S 17 lbs.

Order Straight Shank from

Page 30

39

Mini Picker Maxi Picker

Wt 82#

20” Diameter Wheels

•2 arms w/4 wheels

•8” wide, 2-1/2” centers

•Available with centered or

Offset Shank

•Mounted on 3/4x2-1/2

Shank

Bearing: 203KRR2

MINI PICKER

• 20” Diameter Wheels

• 4 Arms with 4 Wheels

• Unit is 15” Wide

•Available with centered

or Offset Shank

• Mounted on 1x3 Shank

Bearing: 203 KRR2

MAXI PICKER Wt 103#

Order Shank Holders From Page 25

ATTACHMENTS Stubble Mulcher

Frog

Replacement Jacks

Rolling Fender

SM-5 43 lbs.

Fits SK-3

Order Straight Shank from Page 30

J-1 17” Closed Pin Centers 9 lbs.

3/4” Pin Holes, 1” Screws

J-2 20” Closed Pin Centers 12 lbs.

1” Pin Holes, 1-1/8” Screws

*J-3 20” Closed Pin Centers 16 lbs.

1” Pin Holes, 1-1/4” Screws

*This Jack has an adjustment lock

Mounted on

5/8x2” Shank

Also Available

with 3-1/2”

Offset Shank

ROLLING FENDER 44 lbs.

Sliding Fender Available with Offset Shank

S-Crank

Crank used on Early

Model

Roll-A-Cone Gauge

Wheels

S-5 11.5 lbs.

Mounted on

5/8x2” Shank

Length: 36”

Height: 9”

Width: 6-1/2”

SLIDING FENDER 42 lbs.

40

SHANKS Straight Shanks

5” Rear Offset Shank (or Forward Offset)

Drilled 1/2” Holes

3-1/2” Side

Offset Shanks Drilled 1/2” Holes

Footpieces

SK-1

SK-2

SK-3 30”

SK-3 36”

SK-4 34”

SK-5 34”

SK-7 34”

5/8x2x30”

3/4x2-1/2x30” drilled 1/2”

1x3x30” drilled 1/2” & 5/8”

1x3x36” drilled 1/2” & 5/8”

1-1/4x3x34” drilled 1/2” & 5/8”

1x4X34” drilled 5/8”

1-1/4x4X34” drilled 5/8”

10 lbs.

16 lbs.

25 lbs.

30 lbs.

36 lbs.

40 lbs.

51 lbs.

SK-1 Rear Offset

SK-2 Rear Offset

SK-3 Rear Offset

SK-4 Rear Offset

10 lbs.

16 lbs.

30 lbs.

38 lbs.

SK-3 5” Offset 1x3x36” 35 lbs.

SK-3 7” Offset 1x3x36” 35 lbs.

SK-1 Offset 5/8x2x30”

SK-2 Offset 3/4x2-l/2x30”

SK-3 Offset 1x3x36”

SK-4 Offset l-l/4x3x34”

10 lbs.

17 lbs.

30 lbs.

38 lbs.

FP-1

FP-2

FP-3

FP-3HD

FP-3AHD

FP-3HDT

FP-4

FP-4A

FP-4T

1/4” Thick, Fits SK-1 4.5 lbs.

5/16” Thick, Fits SK-2 5.5 lbs.

3/8” Thick, Fits SK-3 6 lbs.



Set Screw Adjuster




Set Screw Adjuster


Slotted out to Trip (Avail. 1/2” or 5/8” Bolts) FPA-23 1/4 lbs.

Allows use of 1/2” Sweep bolt

Takes Place of Washer

Foot Piece

Adaptor

5/8x2x27”

3/4x2-1/2x30”

1x3x36”

1-1/4x3x34”

All Footpieces use 1/2” Bolts but the FP-3HDT and FP-4T

Are available with 1/2” or 5/8” Blots

Hoeme Shank

5” & 7” Side

Offset Shank Drilled 1/2” Holes

SHOWN:

G-9 1x2x22” Clearance 21 lbs.

29” O.D. Diagonal

41” O.D. Around the Back

H-26 1-1/4x2x26” Clearance 26 lbs.

29” O.D. Diagonal


3110 1-1/4x2x30” Clearance 30 lbs.

33” O.D. Diagonal

46.25” O.D. Around the Back

55401 1-1/2x2x30” Clearance 36 lbs.

33.5” O.D. Diagonal


C3490 1-1/4x2x32” Clearance 33 lbs.

36” O.D. Diagonal

48-3/4” O.D. Around the Back

All Shanks Have 15/16” Hole in top

to fit SHSH on pg. 27

41

Planter Guide Heavy Duty

Planter Guide

Spring Loaded Heavy

Duty Planter Guide

Cone Guide Wheel Double Cone

Guide Wheel

GW-40 122 lbs.

Please Specify

Bar Size

When Ordering

Comes Complete

With Clamps

Available with wide or narrow

mounting bracket.

5-Hole Hubs

GW-50 207 lbs.

Please Specify

Bar Size

When Ordering

Comes Complete

With Clamps

Available with wide or narrow

mounting bracket

5 Hole Hubs

GW-50S 202 lbs.

Mounted on

1x3 Shank

Order Angle Clamp

for GW-20 From

Page 26.

Order Straight Clamp

For GW-22 from

Page 25.

5-Hole Hub

GW-20 66 lbs.

GW-22 66 lbs.

Mounted on

1x3 Shank

Order Clamp from

Page 25.

Bearing: HCFTS

206-20

GW-20D 116 lbs.

Mounted On

1x3 Shank

Order Angle or

Straight Clamp

From Page 25 or 26.

5-Hole Hubs

GW-40 (Front Bar Mount w/ Angle Clamp)

GW-41 (Rear Bar Mount w/ Angle Clamp)

GW-42 (Front or Rear Bar Mount w/

Straight Clamp)

GW-40 Shown

Double Cone Guide

Wheel Angled Down

ATTACHMENTS

GW-50 Narrow

Bracket Shown

GW-50S Wide

Bracket Shown


Spring Loaded w/Rubber

Torsion Axle

1-1/4” Shaft & Bearing

Order Clamp from Page

25

Bearing: HCTFS 206-20

GW-20DASLT 114 lbs.

Heavy Duty Barring Off Disc

•Mounted on 1x3 Shank

•360 Degrees Adjustment

•16” Disc Standard

•18” Disc Available

•2 1-1/8 Square Bore Bearings

•Bearing #DC 208 TT5

•Clamp Not Included

VDH-1 HD 51 lbs.

Double Barring Off Disc

•Available with 14” Notched

Discs or 14” Plain Disc

•Mounted on 20” 1x3” Shank

•Disc Bracket Slide In and Out

•Discs Rotate 360 Degrees

•Uses a Hub with 2 Tapered

Roller Bearings on Each Disc

•Wide & Narrow Bracket

Available

VDH-1D 86 lbs.

Order Shank Holder from Page 25

42

ATTACHMENTS

6 Hole Stub Assembly Q 783 (6” Bolt Circle & 4.62” Pilot)

Capacity 4570#

Spindle Diameter 1-3/4

Small Bearing LM 67048

Large Bearing LM 501349

Small Race LM 67010

Large Race LM 501310

Seal C/R 17702

T-3-783 24 lbs.

8 Hole Stub Assembly

Q 778 (8” Bolt Circle & 6” Pilot)

Capacity 4910#

Spindle Diameter 2-1/ 8

Small Bearing 25877

Large Bearing 25590

Small Race 25821

Large Race 25520

Seal C/R 20148

T-3-778 37 lbs.

Heavy 8 Hole

Stub Assembly

Q 848 (8” Bolt Circle & 6” Pilot)

Capacity 8000#

Spindle Diameter 3” or 3-5/8” (Please

Specify)

Also Available w/2-1/4” Spindle to Fit a

Sunflower Disc

Small Bearing 3585

Large Bearing 39581

Small Race 3525

Large Race 39520

Seal C/R 35062

T-3-848 65 lbs.

4 Hole Stub Assembly 5 Hole Stub Assembly 6 Hole Stub Assembly Q 669 (5” Bolt Circle & 3.62” Pilot)

Capacity 1500#


Available Slide in or Bolt on



Small Race LM 11910

Large Race LM 67010

Seal C/R 14975

T-3-669-S (Slide in) 12 lbs.

T-3-669-B (Bolt on) 15 lbs.

Q 719 (5-1/2” Bolt Circle & 4” Pilot)

Capacity 2760#





Small Race LM 67010

Large Race LM 48510

Seal C/R 15190



Q 888 (6” Bolt Circle & 4.62” Pilot)

Capacity 3600#




Large Bearing JL 69349

Small Race LM 67010

Large Race JL 69310

Seal C/R 16289



Heavy 6 Hole Stub Assembly

Q 678 (6” Bolt Circle & 4.62” Pilot)

Capacity 5500#

Spindle Diameter 2-1/16”

Small Bearing 25877

Large Bearing 25590

Small Race 25821

Large Race 25520

Seal C/R 20148

Dust Cap & Seal Retaining Washer

Grease Zerk is on Dust Cap

Same Bearings as 8-hole Q-778

T-3-678 30 lbs.

Sweep Buffer Wing

Sweep BW LRG 2.5 lbs

43

Use a 2-1/4 Tipper

w/15SQ Lister Bottom

or a 346 Tipper w/ 346

Lister Bottom

(Helps Support

Lister Bottom)

2-1/4 Tipper 3 lbs.

346 Tipper 3 lbs.

Tipper

REPLACEMENT SWEEPS AND BLADES Hoeme Chisels

Chromed Cap Chisel

H342CP 6.7 lbs.

HS13CP 6 lbs.

Double Ended Chisel

28 Plain 5 lbs.

Twisted Chisel Hard faced

SL124HF left hand 13 lbs.

SR124HF right hand 13 lbs.

Duckfoot Sweeps

CS-6 1/2x2-2-l/2 Bolts 3.5 lbs.

HC8-2HF 8” Duckfoot 4.0 lbs.

Stubble Mulcher Blades

We also Stock

Blades for S&S

and Hamby

SMS 36” 17 lbs.

SMS 42” 20 lbs. Razor Sweep 48” Shown 40 lbs.

We also Stock 5’,5-

1/2’, 6’, and 7’

Blade Plow Blades

Fluted Coulter Blades Plain Blades

Each Blade

Available in

4 or 5 Hole

17” Blade 9 lbs.

20” Blade 15 lbs.

4-Hole blades have 5” bolt circle & 3.62” pilot

5-Hole blades have 5.5” bolt circle & 4”pilot

22” Blade 4 or 5 Hole 20 lbs.



28” Blade 6 Hole 39 lbs.

4-Hole blades have 5” bolt circle & 3.62” pilot

5-Hole blades have 5.5” bolt circle & 4” pilot

6-Hole blades have 6” bolt circle & 4.62 pilot

HC26F-2HF 26” 1/2x3” Bolts 16 lbs.

HC16AA-2HF 1/2x2-1/2” Bolts 7 lbs.

HC18AA-2HF 1/2x2-1/2” Bolts 8 lbs.

4718-2HF 1/2x2-1/2” Bolts 8 lbs.

HC12-2HF 1/2x2-1/2” Bolts 6 lbs.

S-Shank Sweep S-Shank, Spring Tine

Replacement Points

STS-4 4” Sweep 2 lbs.

CC9A7HF 9” Sweep 2.5 lbs.

CB-1 for S-Shank 2 lbs.

CC37 for Spring Tine Shank 2 lbs.

Hoeme Sweeps

44

Attaches to

•Subsoil Shank

•Badger Claws

•Hook Badger

•9/32” Thick is

Standard

•1/2” Thick

Heavy Duty

Available

Please Specify

Roll-A-Cone

Or Hamby

Chisel Point Attachment

For Stubble Mulcher

Replacement Shins

For Standard or XL Badgers

Chromium Carbide

Replacement Shins For All Curved Ripper Shanks

Replace-Shin-ST 1”x20” (Hardfaced)

3 lbs.

Replace-Shin-XL 1”x26” (Hardfaced)

4 lbs.

REPLACEMENT SWEEPS AND BLADES

1-3/8”x14” (will cover up to 19”) 2 lbs.

1-5/8”x14” (will cover up to 19”) 2.5 lbs.

Lister Bottoms

11WSQ 11” 7 lbs.

15SQ 15” 13 lbs.

346 15” 13 lbs.

GW Cone Only

5-Hole Blades have 5.5” bolt circle & 4” Pilot 27 lbs.

6-Hole Blades have 6” bolt circle & 4.62” Pilot 27 lbs.

Guide Wheel Replacement

Blade

Available in 5 and 6 Hole

1/4” material on 5 and 6 hole

20- 1/2” Diameter

Knife Attachments For Badger

BS-28 13 lbs. per Pair

Replace-Shin-Sub

Chromium Carbide

1-1/2”x14-3/4”

3.5 lbs.

Replace-Shin-Razor

Chromium Carbide

1-1/2”x7”

2 lbs.

SMR-1 20 lbs.

Bolts to Stubble

Mulcher Frog

Shown on Page 28

Replacement Shins For Razor and Subsoil Shank

REPLACEMENT SHINS

Use 346 with Tipper on

Bedder Buster on Page

29

This will fit the

Standard Badger

XL Badger

Hook Badger

45

Hoeme Shank

Wear Shield

Light Duty Nurse

Tank Hitch

M-8001(Poured Chromium

Carbide 2-1/4” wide) 3.5 lbs.

M-8001DF (Poured Chromium

Carbide with Dorsal Fin 2” wide) 5 lbs.

FERTILIZER EQUIPMENT

Fertilizer Knife

Adapters

Adapters bolted on

1x3x20” shank or

1-1/4x3x20” shank

Adapters also fit our

30” shank

Fertilizer Knifes Fits AHSK-3 Shank

AHSK-3 (Adapter w/ Shank) 27 lbs.

AHAD-3 (Adapter Only) 10 lbs.

AH-172 (on left) 5 lbs.

AH-172BS (on right) 5 lbs.

REPLACEMENT POINTS For 1” Thick Shank For Big Ox

M-30 Big Ox (2-1/4” Wide with

Chromium Carbide Cap) 4.5 lbs.

For Hook Badger Fits 1-1/4” Thick Shank

Will Fit Some John Deere Shanks

M-60 (2-1/2” Wide w/Chromium

Carbide Cap) 9 lbs.

Replacement Points For 1” Thick Badger Shanks

M-30 Plain (1-1/2” Wide) 3 lbs.

M-30 Hardfaced (1-1/2” Wide) 3 lbs.

M-30 CC Narrow (1-7/8” Wide

With Chromium Carbide Cap) 3.8 lbs.

M-30 CC (2-1/4” Wide with

Chromium Carbide Cap) 4.5 lbs.

M-30 CCWA (2-1/4” Wide with Wrap

Around Nose Chromium Carbide Cap) 5 lbs.

RT-1 Badger 3 lbs.

RT-2 Big Ox 6.5 lbs.

RT-3 Subsoil 5 lbs.

RT-4 Hook Badger 4 lbs.

RT-5 Sk-3Rp 4 lbs.

Badger Weld On

Repair Tips

NH 52 lbs.

21” In between Legs

25-1/5 Overall Width

H-26 Wear Shield 1/3 lbs.

46

FERTILIZER EQUIPMENT

•Multi Direction:

Forward & sideways movement

•18” Between mounting arms

•28” Wide at bar

•8” of slide 31” Pin center to bar

in pull position

•Available in 4”, 5”, and 7” vertical bar

size (Horizontal bar size determined

by bolt length)

HNH 118 lbs.

B-9500 Metermatic C-4103 RPR Metermatic

Shown with Bracket

Hydraulic Actuator

Breakaway Coupler Shown with bracket

Connector Kit Used to connect Metermatic

To quick coupler

Manifold For Metermatic —

Specify # of outlets

Shown with Bracket

Super Flow

•Built in Hydraulic

Actuator

• Single Dial Setting

•Dial Calibrated in lbs.

N per hour

• Up to 6500 lbs per hour

•Calibrated @ 100#

tank pressure

Order Bracket Separately

B-9500 13 lbs.

B-9500 Bracket 9 lbs.

• Single Dial Setting

•Dial Calibrated in lbs.

N per hour

• Up to 4000 lbs. per hour

•Calibrated @ l00 lbs.

tank pressure

Order Bracket Separately

C-4103 10 lbs.

C-4103 Bracket 9 lbs.

Hydraulic Actuator 3 lbs. Manifold 6 lbs.

Consists of:

3’ of 1” Hoses

2 1” Hose Ends

1 Tank Adapter

1 1” Heavy Duty

Coupling

Connect Kit 6 lbs.

Breakaway Coupler 7 lbs.

Breakaway Bracket 6 lbs.

Heavy Nurse Tank Hitch Ridged Tongue with Swivel Ball

Heavy Nurse Tank Hitch With Floppy Tongue

HNHF 118 lbs.

47

HARVESTING ATTACHMENTS

Corn Lifters

• Very effective in down corn

• Works virtually in all conditions

• Does not interfere with standing crops

• Field tested

• Beater attachment available

• Light weight, but strong

• Attaches to most headers

• Simple to operate

Corn lifter End Cones

• Lifts and separates tangled outside rows

• Hydraulically driven with motor on each end

• Attaches to most headers

48

7655 Roll-A-Cone Rd.

Tulia, TX 79088

Phone: 806-668-4722 Fax: 806-668-4725 Web Page: www.roll-a-cone.com E-mail: [email protected]

If Taking I-27 South From Amarillo

• Take exit 83 (FM 2698) and cross back

over the over-pass heading east

• Go East 4 miles on FM 2698

• Turn right (South) onto FM 146

and go 3 miles

• Turn left (East) at the Roll-A-Cone sign and

go 2-1/2 miles on Roll-A-Cone Road

If Taking I-27 North From Lubbock

• Take exit 74 and go East on Hwy 86 to FM

146

• Turn left (North) on FM 146 and go 4 Miles

• Turn right (East) at the Roll-A-Cone sign and

go 2-1/2 miles

Manufacturer of Quality Farm Equipment - Roll-A-Cone · 2 40 45 4 42 9 20 6 44 34 44 35 35 35 20 38...

Documents

Transcript of Manufacturer of Quality Farm Equipment - Roll-A-Cone · 2 40 45 4 42 9 20 6 44 34 44 35 35 35 20 38...