MANUAL / AUTOMATED

SIDE LOADER

FLEXIBLE. DEPENDABLE. EFFICIENT.

MANUAL /AUTOMATED SIDE LOADER

PERFORMANCE SPECIFICATIONS (in seconds)*

WORKING RPM @ IDLEArm In 4Arm Out 4-1/2Arm Up 2-1/2Arm Down 2Grabber Open 1Grabber Closed 1Packer Extend 11Packer Retract 5Pack Assist Up 4-1/2Pack Assist Down 3Tailgate Open 17Tailgate Closed 20Body Up 58Body Down 68

*Cycle times may vary slightly

ARM ASSEMBLYArm Reach 6 ftArm Lifting Capacity 500 lb

HOPPER SPECIFICATIONSHopper Capacity 2.7 cu ydHopper Floor 3/16 in. grade 50 steelHopper Floor Wear Area 1/4 in. AR Hardox 400

PACKER/EJECTOR SPECIFICATIONSPacking Face 1/4 in. AR200Wear Strips X-Wear and AR400Follower Panels 3/16 in. AR200

BODY SPECIFICATIONSBody Floor 10-gauge AR200Side Walls 11-gauge AR200Roof 11-gauge AR200

TAILGATE SPECIFICATIONSTailgate Side Walls 1/8 in. AR200Tailgate Rear Wall 1/8 in. AR450

HYDRAULICSPump Tandem pump with HOC and

pack-on-the-go flow control systemPacker Valve Parker VA35 x 2 work sections—

pneumatic operating with pre-coalescing filter

Arm Valve Parker P70 x 5 work sections—electric proportional coils

Oil Reservoir 50 gallonFilter 100 mesh suction filter5 Micron Medium-Pressure Return Line

CYLINDERSPacker Cylinder 4 in. bore x 3 in. rod x 39-1/2

in. strokeTailgate Cylinder 2-1/2 in. bore x 1-1/2 in. rod x 38

in. strokeArm In/Out Cylinders 2 in. bore x 1-1/4 in. rod x 67 in. strokeGrabber Cylinder 2 in. bore x 1 in. rod x 6-1/4 in. stroke

PAINTINGPacker and components steel shot blasted, then primed and painted separeately to provide complete top coat coverage to all areasFinish: Sikkens’ Autocoat BT LV650 Topcoat, a high-performance, high solids polyurethane

McNEILUS WARRANTIESContact your McNeilus representative on warranty details. For more information, go to www.mcneiluscompanies.com

OPERATIONSMultiplexed and distributed CAN-based controls offering the best technology in the business (sealed keypads, backlit screens, operator status lights and diagnostic display)

DESCRIPTION 26 YD (19.9 M) 28 YD (21.4 M) 31 YD (23.7 M)

(A) Overall Length, Tailgate Open 347 in. 8814 mm 361 in. 9169 mm 347 in. 8814 mm

(B) Overall Length, Tailgate Closed 279 in. 7087 mm 299 in. 7595 mm 296 in. 7518 mm

(C) Height: Tailgate Open 145 in. 3683 mm 145 in. 3683 mm 163 in. 4140 mm

(D) Height: Tailgate Closed 100 in. 2540 mm 100 in. 2540 mm 108 in. 2743 mm

Overall Width: Arm Stowed 96 in. 2438 mm 96 in. 2438 mm 96 in. 2438 mm

Minimum Dump Radius 42 in. 1067 mm 42 in. 1067 mm 42 in. 1067 mm

Minimum Alley Width 152 in. 3861 mm 152 in. 3861 mm 152 in. 3861 mm

Grabber Height from Ground 10 in. 254 mm 10 in. 254 mm 10 in. 254 mm

Manual and Automated Routes? This Truck Does Both.

Up to 80% of hydraulic contaminants can enter through the packing cylinders. McNeilus-exclusive Excalibre™ cylinders help prevent hydraulic contamination with a patented tool steel shaver and field-proven seal that significantly minimize problem-causing debris.

FLEXIBLE: Collection routes can be unpredictable

when it comes to what’s sitting next to the curb. The

McNeilus Manual/Automated (MA) Side Loader takes

out some of the guesswork with an automated arm,

plus a manual loading mechanism.

EFFICIENT: WIth a simple-to-operate arm, the Manual/

Automated (MA) Side Loader handles residential cans

efficiently. The low-height hopper sill also allows the

operator to manually throw in the “little extras” that

often come with residential routes. Adding a cart tipper

allows collection from both sides of the street.

This vehicle can also be ordered without the arm as a

strictly manual side loader. The drop frame and lower

hopper sill make it ideal for single-man collection or

recycling routes, allowing the operator to easily and

efficiently dump totes.

Body sizes: 20, 22, 26, 28 and 31 cubic yards

A

B

CD

E

F

B

ALow sill height for easier loading of the “extras”, optional cart tippers allow collection from both sides of the street. Plus, a simple-to-operate tilt dump body.

Arm and packer operation at idle speed keeps noise to a minimum and lowers fuel consumption.

C

With an arm reach of 6-feet, lift capacity of 500 pounds, smooth operation and one-button pickup, it can handle cans of almost any size.

Combining a side arm for automated collection and a low-height hopper for easier manual loading makes this refuse vehicle the most flexible on the market.

Multiplexed and distributed CAN-based controls offer the best technology in the business (sealed keypads, backlit screens, operator status lights and diagnostic display).

D

E

F

G

G

McNeilus is a member of these national purchasing programs.

Quality OEM parts for all makes and models

www.StreetSmartParts.com or 888.686.7278

CONTRACT #112014-MCN

MANUAL / AUTOMATED

SIDE LOADER

FLEXIBLE. DEPENDABLE. EFFICIENT.

MANUAL /AUTOMATED SIDE LOADER

PERFORMANCE SPECIFICATIONS (in seconds)*

WORKING RPM @ IDLEArm In 4Arm Out 4-1/2Arm Up 2-1/2Arm Down 2Grabber Open 1Grabber Closed 1Packer Extend 11Packer Retract 5Pack Assist Up 4-1/2Pack Assist Down 3Tailgate Open 17Tailgate Closed 20Body Up 58Body Down 68

*Cycle times may vary slightly

ARM ASSEMBLYArm Reach 6 ftArm Lifting Capacity 500 lb

HOPPER SPECIFICATIONSHopper Capacity 2.7 cu ydHopper Floor 3/16 in. grade 50 steelHopper Floor Wear Area 1/4 in. AR Hardox 400

PACKER/EJECTOR SPECIFICATIONSPacking Face 1/4 in. AR200Wear Strips X-Wear and AR400Follower Panels 3/16 in. AR200

BODY SPECIFICATIONSBody Floor 10-gauge AR200Side Walls 11-gauge AR200Roof 11-gauge AR200

TAILGATE SPECIFICATIONSTailgate Side Walls 1/8 in. AR200Tailgate Rear Wall 1/8 in. AR450

HYDRAULICSPump Tandem pump with HOC and

pack-on-the-go flow control systemPacker Valve Parker VA35 x 2 work sections—

pneumatic operating with pre-coalescing filter

Arm Valve Parker P70 x 5 work sections—electric proportional coils

Oil Reservoir 50 gallonFilter 100 mesh suction filter5 Micron Medium-Pressure Return Line

CYLINDERSPacker Cylinder 4 in. bore x 3 in. rod x 39-1/2

in. strokeTailgate Cylinder 2-1/2 in. bore x 1-1/2 in. rod x 38

in. strokeArm In/Out Cylinders 2 in. bore x 1-1/4 in. rod x 67 in. strokeGrabber Cylinder 2 in. bore x 1 in. rod x 6-1/4 in. stroke

PAINTINGPacker and components steel shot blasted, then primed and painted separeately to provide complete top coat coverage to all areasFinish: Sikkens’ Autocoat BT LV650 Topcoat, a high-performance, high solids polyurethane

McNEILUS WARRANTIESContact your McNeilus representative on warranty details. For more information, go to www.mcneiluscompanies.com

OPERATIONSMultiplexed and distributed CAN-based controls offering the best technology in the business (sealed keypads, backlit screens, operator status lights and diagnostic display)

DESCRIPTION 26 YD (19.9 M) 28 YD (21.4 M) 31 YD (23.7 M)

(A) Overall Length, Tailgate Open 347 in. 8814 mm 361 in. 9169 mm 347 in. 8814 mm

(B) Overall Length, Tailgate Closed 279 in. 7087 mm 299 in. 7595 mm 296 in. 7518 mm

(C) Height: Tailgate Open 145 in. 3683 mm 145 in. 3683 mm 163 in. 4140 mm

(D) Height: Tailgate Closed 100 in. 2540 mm 100 in. 2540 mm 108 in. 2743 mm

Overall Width: Arm Stowed 96 in. 2438 mm 96 in. 2438 mm 96 in. 2438 mm

Minimum Dump Radius 42 in. 1067 mm 42 in. 1067 mm 42 in. 1067 mm

Minimum Alley Width 152 in. 3861 mm 152 in. 3861 mm 152 in. 3861 mm

Grabber Height from Ground 10 in. 254 mm 10 in. 254 mm 10 in. 254 mm

Manual and Automated Routes? This Truck Does Both.