Manual Push Stackers -...
1
MANUAL PUSH STACKERS CAPACITY • 2200 lb (1000 kg) at 24" (610 mm) load center LIFT HEIGHTS • 63" (1600 mm) • 98" (2489 mm) • 118" (2997 mm) OPERATION/CONTROLS • Up/Down lever control mounted on dash • Operator protection screen • Excellent forward visibility and pallet handling • Dual push handles mounted at comfort height level on mast • Ergonomic spring-loaded steering handle with comfort grip POWER/HYDRAULIC • 12 Volt powered lift system, manually propelled • 12 Volt minimum maintenance deep cycle battery and built-in charger , for 110/1/60 plug-in • Flow control valve at base of cylinder to regulate lowering speed • On/Off key switch • Battery gauge FORKS/CHASSIS • 42" (1067 mm) long forged forks, 31.5" (800 mm) OD adjustment on pin style carriage • Straddle legs adjust to three positions for varying pallet size s • Channel mast fitted with heavy-duty roller bearings and dual lift chains • Easy access battery compartment panel • Foot brake locks stacker from moving WHEELS • 3" (76 mm) diameter polyurethane load wheels FORKS/CHASSIS • 7" (178 mm) diameter nylon pivot steer wheels An ergonomic alternative to manual lifting, intermediate- duty stacking and pallet positioning applications. XPS Series Adjustable straddles Easy access controls WPS Series CAPACITY 2200 lb (998 kg) •Manually propelled with push button, lift/lower control mounted on dash •Adjustable straddles - 36" (914 mm) to 50" (1270 mm) ID •Straddle adjustment jack supports •Phenolic load rollers and easy swivel casters •12-volt system comes with minimum maintenance deep cycle battery •Built-in 10 AMP plug-in battery charger for 115/1/160 power supply •Digital battery discharge indicator •42" (1067 mm) long adjustable forged forks •Emergency power disconnect stop button •Operator protector screen •Ergonomic push/pull handles comes with spring pivot steering handle •On / Off key switch •Foot pedal parking brake A modern and highly versatile work positioning stacker for your material handling needs. Designation Model # WPS22-130 WPS22-150 Load Capacity 2200 lb 2200 lb Down Rating N/A 1320 lb over 130" Chassis Dimensions Fork Length 42" 42" Adjustable Fork Spread 8" - 30" OD 8" - 30" OD Minimum Overall Height 91" 101" Number of Mast Stages 2 2 Lift Height 130" 150" Ground Clearance 1" 1" Approximate Shipping Weight 1060 lb 1190 lb Rollers Steer Wheels 7" dia. x 2" 7" dia. x 2" Load Rollers 3.25" dia. x 4" 3.25" dia. x 4" Wheels and •Lifting Speed full load 11fpm •Push button type of pump control •52 3/4” Minimum turning radius •Lifting Speed no load 18 fpm 1-800-265-5117 MANUAL PUSH STACKERS METRIC AUTOMOTIVE www.metric-automotive.com
Transcript of Manual Push Stackers -...
MANUAL PUSH STACKERS
CAPACITY• 2200 lb (1000 kg) at 24" (610 mm) load center
LIFT HEIGHTS• 63" (1600 mm)• 98" (2489 mm)• 118" (2997 mm)
OPERATION/CONTROLS• Up/Down lever control mounted on dash• Operator protection screen• Excellent forward visibility and pallet handling• Dual push handles mounted at comfort height level on mast• Ergonomic spring-loaded steering handle with comfort grip
POWER/HYDRAULIC• 12 Volt powered lift system, manually propelled• 12 Volt minimum maintenance deep cycle battery and built-in
charger, for 110/1/60 plug-in• Flow control valve at base of cylinder to regulate lowering speed• On/Off key switch• Battery gaugeFORKS/CHASSIS• 42" (1067 mm) long forged forks, 31.5" (800 mm) OD adjustment
on pin style carriage• Straddle legs adjust to three positions for varying pallet size
s
• Channel mast fitted with heavy-duty roller bearings and dual
lift chains
• Easy access battery compartment panel• Foot brake locks stacker from moving
WHEELS• 3" (76 mm) diameter polyurethane load wheels
FORKS/CHASSIS• 7" (178 mm) diameter nylon pivot steer wheels
An ergonomic alternative to manual lifting, intermediate-
duty stacking and pallet positioning applications.
XPS Series
Adjustable straddles
Easy access controls
WPS Series
CAPACITY2200 lb (998 kg)
•Manually propelled with push button, lift/lower control
mounted on dash
•Adjustable straddles - 36" (914 mm) to 50" (1270 mm)
ID•Straddle adjustment jack supports•Phenolic load rollers and easy swivel casters•12-volt system comes with minimum maintenance deep
cycle battery
•Built-in 10 AMP plug-in battery charger for 115/1/160
power supply
•Digital battery discharge indicator•42" (1067 mm) long adjustable forged forks•Emergency power disconnect stop button•Operator protector screen•Ergonomic push/pull handles comes with spring pivot
steering handle•On / Off key switch•Foot pedal parking brake
A modern and highly versatile work positioning stacker for your material handling needs.
Designation
Model # WPS22-130 WPS22-150
Load Capacity 2200 lb 2200 lb
Down RatingN/A
1320 lb over130"
Chassis Dimensions
Fork Length 42" 42"
Adjustable Fork Spread 8" - 30" OD 8" - 30" OD
Minimum Overall Height 91" 101"
Number of Mast Stages 2 2
Lift Height 130" 150"
Ground Clearance 1" 1"
Approximate Shipping Weight 1060 lb 1190 lb
Rollers
Steer Wheels 7" dia. x 2" 7" dia. x 2"
Load Rollers 3.25" dia. x 4" 3.25" dia. x 4"Wheels and
•Lifting Speed full load 11fpm
•Push button type of pump control•52 3/4” Minimum turning radius
•Lifting Speed no load 18 fpm
1-800-265-5117
MANUAL PUSH STACKERS
METRICAUTOMOTIVE www.metric-automotive.com
