Manual Led Tv 19MT43D

8/10/2019 Manual Led Tv 19MT43D

1/24

www.lg.com

OWNERS MANUAL

LED TV*

Please read this manual carefully before operating the your TV andretain it for future reference.

*LG LED TV applies LCD screen with LED backlights.

19MT43D
http://www.lg.com/http://www.lg.com/


2/24

2

ENGLIS

H

TABLE OF CONTENTS

TABLE OF CONTENTS

3 LICENSES

3 OPEN SOURCE SOFTWARENOTICE

4 ASSEMBLING AND PREPARING

4 Unpacking

6 Parts and Buttons

7 Lifting and Moving the TV

8 Setting up the TV8 - Attaching the stand

9 - Mounting on a Table

10 - Tidying Cables

11 - Mounting on a Wall

13 MAKING CONNECTIONS

13 Connecting an Antenna

14 Other Connections

15 Connecting a PC

16 REMOTE CONTROL

17 SETTINGS

19 TO SEE WEB MANUAL

20MAINTENANCE

20 Cleaning your TV

20 Screen, Frame, Cabinet, and Stand

20 Power cord

20 Preventing image burn or burn-in on Your

TV screen

21 TROUBLESHOOTING

22 SPECIFICATIONS


3/24

ENGLIS

H

3LICENSES/OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories.

"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI

logo are trademarks or registered trademarks of HDMI Licensing LLC in the

United States and other countries.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this

product, please visit http://opensource.lge.com.In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are

available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of

performing such distribution (such as the cost of media, shipping and handling) upon email request to

[email protected]. This offer is valid for three (3) years from the date on which you purchased theproduct.


4/24

ENGLIS

H


ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual

product and accessories.

y Do not use any unapproved items to ensure the safety and product life span.

y Any damages or injuries by using unapproved or counterfeit parts or accessories are not covered

by the warranty.

y Some models appear to have a thin film on the screen. It is actually part of the screen, do not

remove it.

CAUTION

y The items supplied with your product may vary depending upon the model.

y Product specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions.

y For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB

flash drive does not fit into your TVs USB port.

NOTE

y Image shown may differ from your TV.

y Your TVs OSD (On Screen Display) may differ slightly from that shown in this manual.

y The available menus and options may differ from the input source or product model that you areusing.

y New features may be added to this TV in the future.

y The TV can be placed in standby mode in order to reduce the power consumption.

The TV should be turned off if it will not be watched for some time, as this will reduce energy

consumption.

y The energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

NOTE

A

B

A

B*A 10 mm

*B 18 mm


5/24

ENGLIS

H

5ASSEMBLING AND PREPARING

Remote Control and AAA

Batteries

CD (Owner's Manual)/

Cards

AC-DC Adapter

Stand Body

(See page 16)

(See page 9) (See page9)

(See page 8)

Cable Tie

(See page 10)

Power Cord AC-DC Adapter

or

(Depending upon model)

Stand Base

(See page 8)

(See page 9)

(Depending upon model)


6/24

ENGLIS

H


Parts and Buttons

y All of the buttons are touch sensitive and can be operated through simple touch with your finger.

NOTE

Touch button Description

Scrolls through the saved programmes.

Adjusts the volume level.

OK Selects the highlighted menu option or confirms an input.

SETTINGS Accesses the main menus, or saves your input and exits the menus.

INPUT Changes the input source.

Turns the power on or off.

Remote Control Sensor

Touch Buttons

Power Indicatory Red When the power is

turned off

y Off When the power is

turned on

y Amber When the power

is in power saving mode


7/24

ENGLIS

H


y When transporting the TV, do not expose the

TV to jolts or excessive vibration.

y When transporting the TV, keep the TV

upright, never turn the TV on its side, or tilt

towards the left or right.

Lifting and Moving the TV

When moving or lifting the TV, read the following

to prevent the TV from being scratched or

damaged and for safe transportation regardless of

its type and size.

Avoid touching the screen at all times, as

this may result in damage to the screen or

some of the pixels used to create images.

CAUTION

y It is recommended to move the TV in the

box or packing material that the TV originally

came in.

y Before moving or lifting the TV, disconnectthe power cord and all cables.

y When holding the TV, the screen should face

away from you to prevent the screen from

scratches.

y Hold the top and bottom of the TV frame

firmly. Make sure not to hold the transparent

part, speaker, or speaker grill area.


8/24


9/24


10/24

ENGLIS

H


y Do not place the TV near or on sources ofheat, as this may result in fire or other damage.

yPlease be sure to connect the TV to the

AC/DC power adapter before connecting the

TVs power plug to a wall power outlet.

CAUTION

Adjusting the angle of the TV to suit view

y Image shown may differ from your TV.

Tilt from +20 to -5 degrees up or down to adjust

the angle of the TV to suit your view.

Front Rear

+20-5

yWhen you adjust the angle, do not hold

the bottom of the TV frame as shown on

the following illustration, as may injure your

fingers.

NOTE

Using the Kensington security system

The Kensington security system connector is

located at the back of the TV. For more information

of installation and using, refer to the manual

supplied with the Kensington security system orvisit http://www.kensington.com .

Connect the Kensington security system cable

between the TV and a table.

yThe Kensington security system is optional. You

can obtain additional accessories from mostelectronics stores.

NOTE

Tidying Cables

1 Attach the Cable Holderto the edge of stand bodysecurely.

2 Gather and bind the cables with the supplied

Cable Holder.

Cable Holder


11/24

ENGLIS

H


Mounting on a Wall

For proper ventilation, allow a clearance of 10 cm

on each side and from the wall. Detailed wall

mounting instructions will be included with the

optional wall mount you purchase.

If you intend to mount the TV to a wall, attach Wall

mounting interface (optional parts) to the back of

the TV.

When you install the TV using the wall mounting

interface (optional parts), attach it carefully so it

will not fall.

1 Use a wall mount interface in accordance withVESA Standards.

2 If you use screws longer than standard, the TVmight be damaged internally.

3 If you use improper screws, the product mightbe damaged and drop from mounted position.

In this case, LG Electronics is not responsible

for damage.

4 VESA compatible only with respect to screwmounting interface dimensions and mounting

screw specifications.

5 Please use a VESA standard wall mount padand screws. Please use a mount that supports

the VESA standard as below.

y 784.8 mm (30.9 inch) and under

* Wall Mount Pad Thickness : 2.6 mm

* Screw : 4.0 mm x Pitch 0.7 mm x

Length 10 mm

y 787.4 mm (31.0 inch) and above

y Please use VESA standard wall mount pad

and screws.

y VESA (A x B)

AB

10 cm

10 cm

10 cm

10 cm

Model 19MT43D

VESA (A x B) 75 x 75 (mm)

Standard screw M4 x L10

Number of screws 4

Wall mount bracket

(optional)

RW120

yUse the screws that are listed on the VESAstandard screw specifications.

yThe wall mount kit includes an installationmanual and necessary parts.

yThe wall mount bracket is optional. You canobtain additional accessories from your localdealer.

yThe length of screws may differ dependingupon the wall mount. Be sure to use theproper length.y For more information, refer to the instructionssupplied with the wall mount.

NOTE


12/24

ENGLIS

H


y Disconnect the power first, and then move

or install the TV. Otherwise electric shock

may occur.

y If you install the TV on a ceiling or slantedwall, it may fall and result in severe injury.

Use an authorized LG wall mount and

contact the local dealer or qualified

personnel.

y Do not over tighten the screws as this may

cause damage to the TV and void your

warranty.

y Use the screws and wall mounts that

meet the VESA standard. Any damages

or injuries by misuse or using an improper

accessory are not covered by the warranty.

y Screw length from outer surface of back

cover should be under 8mm.

Wall mount Pad

Back Cover

CAUTION

Wall mount Pad

Back Cover

Standards c r e w :M4 X L10

Max. 8mm


13/24

ENGLIS

H

13MAKING CONNECTIONS

Connect various external devices to the TV and switch input modes to select an external device. For more

information about an external devices connection, refer to the manual supplied with each device.

Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC,

camcorders or cameras, gaming devices, and other external devices.

y If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input

cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the

manual supplied with the connected device.

y The external device connection may differ from the drawing.

y Connect external devices to the TV regardless of the order of the TV port.

y If you connect a gaming device to the TV, use the cable supplied with the gaming device.

yRefer to the external equipments manual for operating instructions.

MAKING CONNECTIONS

Connecting an Antenna

Connect an antenna, cable, or cable box to watch TV referring to the following. The illustrations may differ

from the actual accessories and an RF cable is not supplied.

Connect the TV to a wall antenna socket with an RF cable (75 ).

y Make sure not to bend the copper wire of

the RF cable.

y Complete all connections instructions

between devices, and then connect the

power cord to the power outlet to prevent

damages to your TV.

CAUTION

Copper wire

R/F Cable (75)

(Not Provided)

NOTE

VHF Antenna

UHF Antenna

Antenna

ANTENNA/CABLE IN

y Use a signal splitter to use more than 2 TVs.

y If the image quality is poor, install a signal

amplifier properly to improve the image

quality.

y If the image quality is poor with an antenna

connected, aim the antenna to the proper

direction.

NOTE

Terminal


14/24

ENGLIS

H

14 MAKING CONNECTIONS

Other Connections

Connect your TV to external devices. For the best picture and audio quality, connect the external

device and the TV with the HDMI cable as shown. Depending upon the model, a cable may be provided.

1 The USB port provides 0.5A electric current. . If you need more electric current in the case of an HDD,

use a separate power adaptor.


15/24


16/24

ENGLIS

H

16 REMOTE CONTROL

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control.

Please read this manual carefully and use the TV correctly.

To install batteries, open the battery cover, replace batteries (1.5 V AAA) matchingthe and ends to the label inside the compartment, and close the battery cover.

To remove the batteries, perform the installation actions in reverse.

y Do not mix old and new batteries, as this may damage the remote control.

CAUTION

Make sure to point the remote control to the remote control sensor on the TV.

(POWER) Turns the TV on or off.TV/PC Selects TV or PC mode.CAPTION Activates or deactivates the subtitles.AV MODE Selects an AV mode.RATIO Resizes an image.

INPUT Selects the input mode.

Number buttons Enters numbers.LIST Accesses the saved channel list.

FLASHBK Alternates between the two last channels selected

(pressing repeatedly).VOL Adjusts the volume level.

FAV Accesses your favorite channel list.AUDIODigital signal: Changes the audio language. Analog signal: Changes the MTS sound.MUTE Mutes all sounds.

CH Scrolls through the saved channels.PAGE Moves to the previous or next screen.

PICTURE Changes the image mode.INFO Shows information on the current program.SOUND Changes the sound mode.SETTINGS Accesses the main menu.Q.MENU Accesses the quick menu.

Navigation buttons (,,,) Scrolls through menus oroptions.OK Selects menus or options and confirms your input.

BACK Returns to the previous screen.EXIT Clears all on-screen displays and returns to TV viewing.

Not functional.SLEEP Sets the length of time until the TV to turns off.Control buttons ( , , , , ) Controls the compatible devices(USB).

These access special functions in some menus.Backlight ( )Adjusts the brightness of the screenby

controlling the screen backlight.


17/24

17SETTINGS

ENGLIS

H

ENGLIS

H

SETTINGS

To set up the channels automatically

SETTINGSCHANNELAuto Tuning

Memorizes automatically the channels being broadcast.

y The channels will not be memorized properly

if the antenna/cable is not installed correctly.

y Auto Tuningmemorizes the channels that are

currently being broadcast.

y If Lock Systemis turned on, a pop-up window

will appear asking for password.

To use Energy Saving feature

SETTINGSPICTUREEnergy Saving

Saves electric power by adjusting screen

brightness.

y Off Select if this feature is not necessary.

y Minimum/Medium/Maximum Applies the

pre-set Energy Saving.

y Screen off Screen is turned off and only

sound is played. Press any button except

Power button on the remote control to turn

the screen back on.

To select picture mode

SETTINGSPICTUREPicture Mode

Select the picture mode optimized for the

viewing environment or the program.

y Vivid Adjusts the video image for the retail

environment by enhancing the contrast,

brightness, color, and sharpness.

y Standard Adjusts the image for a normal

environment.

y APS The Energy Saver feature changes

settings on the TV to reduce power

consumption.

y CinemaOptimizes the video image for a

cinematic look to enjoy movies as if you are in

a movie theater.

y Game Optimizes the video image for fast

moving video such as PCs or games.

y Photo Displays the optimum picture for photo

(still image).

yExpert 1, 2 Adjusts the detailed video imagesettings for video experts as well as general

viewers.

y Pressing any button of the remote control will

turn on the screen again.

To set advanced control


Advanced Control/Expert Control

For each picture mode, screen can be calibrated or for a

special screen, picture settings can be adjusted.

Select the desired Picture Mode.

y Dynamic Contrast Adjusts the contrast to

the optimal level according to the images

brightness.

y Dynamic Color Adjusts colors to make the

image appear in more natural colors.

y Skin ColorSkin color spectrum can be

separately set to implement the skin color as

defined by the user.

y Grass ColorNatural color spectrum (meadows,hills, etc.) can be separately set.

y Sky ColorSky color is set separately.

y GammaSets the gradation curve according to

the output of picture signal in relation to the

input signal.

y Color GamutSelects the range of colors that

can be expressed.

y Edge EnhancerShows clearer and distinctive

yet natural edges of the video.

y Color FilterFilters a specific color spectrum in

RGB colors to fine-tune color saturation andhue accurately.

y Color TemperatureAdjusts the overall tone

of the screen as desired. In Expert mode,

detailed fine-tuning can be set via Gamma

method, etc.

y Color Management SystemThis system is

used by experts to adjust color with a test

pattern. They can select from six color areas

(Red/ Green/Blue/ Cyan/Magenta/Yellow)

without affecting other colors. For normal

images, adjustments may not result in

noticeable color changes.

y Depending upon input signal or other picture

settings, the range of detailed items for

adjustment may differ.


18/24

18 SETTINGS

ENGLIS

H

To set additional picture options


Picture Option

Adjusts detailed setting for images.

y Noise ReductionEliminates noise in thepicture.

y MPEG Noise ReductionEliminates noise

generated while creating digital picture signals.

y Black LevelAdjusts the brightness and

contrast of the screen to suit the black level.

y Real CinemaOptimizes the screen for movie

viewing.

y Motion Eye Care(Depending upon the model)

Saves power consumption by adjusting the

brightness corresponding to the movement of

the image on the screen.

y Depending upon input signal or other picture

settings, the range of detailed items for

adjustment may differ.

To use TV speaker

SETTINGSAUDIOTV Speaker

Sound is output through the TV speaker.

To set the password

SETTINGSLOCKSet Password

Set or change the TV password.

y The initial password is set to 0000.

To set the caption

SETTINGSOPTIONCaption

View captions when the TV station provides captioned

programming. Program captions work only on digital/

analog broadcasts or external input.

Change Captionto Onand select caption settings.

y Mode

CC 1-4(Closed Captioning) / Text 1-4Displays

the audio portion of a TV program as text

on the TV screen. CC1 is the most common

mode in use. Field 1 data channels: two

Captions (CC1, CC2), two Text (T1, T2). Field 2

data channels: two Captions (CC3, CC4), two

Text (T3, T4).

Service 1-6This is only available for the digitalbroadcasting system.

y Digital OptionSet up the size and color of

the captions on Digital Option. Please select

Set by Programor Custom.Select Customto

adjust minute options such as the captions

size and color.

To return to initial settings

SETTINGSOPTIONInitial Setting

Returns to initial default mode by deleting all optionalsetup. Once initialization is completed, the TV will turn

off and on by itself.

y When Lock Systemis in place, a pop-up

window appears and asks for password.

y Do not turn off the power during initialization.


19/24


20/24

ENGLIS

H

20 MAINTENANCE

MAINTENANCE

Cleaning your TV

Clean your TV regularly to keep it at peak performance and to extend the product lifespan.

CAUTION

y Before cleaning, turn the power off and disconnect the power cord and all other cables.

y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall

outlet to prevent possible damage from lightning or power surges.

Screen, Frame, Cabinet, and Stand

To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent.

Then wipe immediately with a dry cloth.

CAUTION

y Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in

scratches on the screen and image distortions.

y Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, or

lubricants, as these may damage the screens finish and cause discoloration.

y Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or

malfunction.

Power cord

Remove the accumulated dust or dirt on the power cord regularly.

y If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become

a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the

warranty.

y If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on theletterboxed area of the screen.

y Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD)

to prevent image burn.

Preventing image burn or burn-in on Your TV screen


21/24

ENGLIS

H

21TROUBLESHOOTING

TROUBLESHOOTING

Problem Solution

Cannot control the TV with theremote control.

y Check the remote control sensor on the product and try again.y Check if there is any obstacle between the product and the remotecontrol.

y Check if the batteries are still working and properly installed ( to ,to ).

No image display and no soundis produced.

y Check if the product is turned on.y Check if the power cord is connected to a wall outlet.y Check if there is a problem in the wall outlet by connecting otherproducts.

Image appears slowly when the

TV turns on.

y The image is muted during the product startup process. This is

normal. If the image does not appear in a few minutes, unplug theTV for 30 seconds and try again. If the image still does not appear,contact the authorized service center in your local area.

Cannot connect externaldevices.

y Refer to the Connection Overviewand connect an external device.

The TV turns off suddenly. y Check the power control settings. The power supply may beinterrupted.

y Check if the Sleep Timeror Off Timefeature is activated in the TIMEsettings.

y If there is no signal while the TV is on, the TV will turn off automaticallyafter 15 minutes of inactivity.

Vertical and horizontal lines

with net patterns appear on thescreen momentarily that areshaking.

y Refrain from using electronic devices, such as cordless telephones,

hair dryers, or electrical drills near the product. The problem is a resultof high-frequencies and strong electro-magnetic fields caused bythese devices.

y The product may power off if you continue to use it near thesedevices.


22/24

ENGLIS

H

22 SPECIFICATIONS

SPECIFICATIONS

Product specifications may be changed without prior notice due to upgrade of product functions.

Television System NTSC-M, ATSC, 64 & 256 QAMProgram Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135

External Antenna Impedance 75

Environmentcondition

Operating Temperature 10 C to 35 C

Operating Humidity 20 % to 80 %

Storage Temperature -10 C to 60 C

Storage Humidity 5% to 90%

MODELS19MT43D

(19MT43D-PUS)

Dimensions(W x H x D)

With stand (mm) 441.7 x 350.9 x 167.8

Without stand(mm) 441.7 x 277.7 x 62.9

WeightWith stand (kg) 2.5

Without stand (kg) 2.3

Power rating 19 V 1.6 A

AC/DC Adapter

Manufacturer: Lien ChangModel: LCAP16A-A, LCAP25AManufacturer: HonorModel: ADS-40FSG-19 19032GPCU, ADS-40SG-19-2 19032G

Adapter (DC Power) In: AC 100 - 240 V ~ 50/60 HzOut: DC 19 V 1.7 A


23/24

ENGLIS

H

23SPECIFICATIONS

RGB (PC) / HDMI (PC) supported mode

ResolutionHorizontal

Frequency(kHz)Vertical

Frequency(Hz)

720 x 400 31.468 70.080

640 x 480 31.46937.500

59.94075.000

800 x 60037.87946.875

60.31775.000

1024 x 76848.36360.023

60.00475.029

1280 x 800 49.702 59.810

1366 x 768 47.717 59.790

y The optimal display resolution is

1366 X 768@60Hz.

y The optimal timing is vertical frequency

60Hz in each mode.

NOTE

Component port connecting information

Component ports on the

TVY PB PR

Video output portson DVD player

Y PB PR

Y B-Y R-Y

Y Cb Cr

Y Pb Pr

HDMI (DTV) supported mode



Frequency(Hz)

720 x 480p 31.469

31.500

59.940

60.000

720 x 576p 31.250 50.000

1280 x 720p 37.500

44.960

45.000

50.000

59.940

60.000

1920 x 1080i 33.720

33.750

28.125

59.940

60.000

50.000

1920 x 1080p 27.000

33.750

56.25067.430

67.500

24.000

30.000

50.00059.940

60.000

Component supported mode



Frequency(Hz)

720 x 480i15.730

15.730

59.940

60.000

720 x 480p31.470

31.500

59.940

60.000

1280 x 720p44.960

45.000

59.940

60.000

1920 x 1080i33.720

33.750

59.940

60.000

1920 x 1080p

26.970

27.000

33.710

33.750

67.432

67.500

23.976

24.000

29.970

30.000

59.940

60.000


24/24

Make sure to read the Safety Precautionsbefore using the product.Keep the Owners Manual (CD) in anaccessible place for future reference.The model and serial number of the TV arelocated on the back and one side of the TV.

Record them below should you ever needservice.

MODEL

Manual Led Tv 19MT43D

Documents

Transcript of Manual Led Tv 19MT43D