MAME Keyboard Commands
-
Upload
andrewpiano -
Category
Documents
-
view
213 -
download
0
Transcript of MAME Keyboard Commands
-
8/16/2019 MAME Keyboard Commands
1/2
Using a Keyboard
All keys are congurable in the user interface from the Conguration Menu. This list shows the default
keyboard conguration:
Main Keys
5, 6, 7, 8
Insert coin (players 1, 2, 3, 4)
1, 2, 3, 4
Start (players 1, 2, 3, 4)
Arrow keys
Move Joystick
Left ControlButton 1
Left Option
Button 2
Space
Button 3
ESC (Escape)
Quits the game
Button 1 usually represents a game's primary action, like "Fire" or "Jump." Button 2 is the secondary
action, like "Thrust" in Asteroids. Button 3 is used for "Hyperspace" in Asteroids. Some games won't use
any buttons, while others (such as Defender or Street Fighter) will use many buttons.
Games which use two joysticks simultaneously, such as Karate Champ, Robotron, Crazy Climber, or
Battle Zone, default to using the E/S/D/F keys for the left joystick and the I/J/K/L keys for the right
joystick
Other Keys
Tab
Toggles the Conguration Menu
~ (Tilde)
Toggles the On Screen Display. Use the up and down arrow keys to select which parameter to
modify (global volume, mixing level, gamma correction etc.) Use the left and right to arrow keys
to change modify the value. Some parameters adjust with ner or coarser control if you hold
down the CTRL or SHIFT keys while pressing the left/right arrows. Use the ENTER key to reset a
MAME OS X Manual > Contents > Using a Keyboard
Using a Keyboard http://mameosx.sourceforge.net/documentation/manual/keyboar...
of 2 11/2/15, 6:22
-
8/16/2019 MAME Keyboard Commands
2/2
P
Pauses the game
SHIFT+P
While paused, advances to next frame
F1
Toggle crosshairs for games that use them
F2
Service Mode
F3
Resets the game
F4
Shows the game palette, decoded GFX, and any tilemaps. Use the ENTER key to switch betweenthe three modes (palette, graphics, and tilemaps). Press F4 again to turn o ! the display.
F7
Load a save state. You will be requested to press a key to determine which save state you wish
to load. Note that the save state feature is not supported for a large number of drivers. If
support is not enabled for a given driver, you will receive a warning when attempting to save or
load.
SHIFT+F7
Create a save state. Requires an additional keypress to identify the state, similar to the load
option above.
F8
Decrease frame skip on the y
F9
Increase frame skip on the y
F10
Toggle speed throttling
F11
Toggles speed display
SHIFT+F11
Toggles proler display (debug builds only)
F12
Saves a screen snapshot
MAME OS X Manual > Contents > Using a Keyboard
Using a Keyboard http://mameosx.sourceforge.net/documentation/manual/keyboar...
of 2 11/2/15, 6:22