MALAYSIA - KitchAVENTOS lift systems AVENTOS HF / SERVO-DRIVE for AVENTOS HF AVENTOS HK /...
Transcript of MALAYSIA - KitchAVENTOS lift systems AVENTOS HF / SERVO-DRIVE for AVENTOS HF AVENTOS HK /...
www.blum.com
A quick reference for Blum products and prices
Set price guide
MALAYSIA2018
Valid 2018 December 31st to September 1st from
Contents
TANDEMBOX antaro Standard drawers / High-fronted pull-outs Inner drawer / Inner pull-out sets Accessories, Design elements and Sink
unit
TANDEMBOX intivo Standard drawers / High-fronted pull-outs / Inner drawers and Inner pull-outs Accessories and Design elements Sink unit sets SPACE CORNER and Design elements
LEGRABOX pure LEGRABOX pure drawer / High-fronted pull-out / Inner pull-out Accessories / Sink unit
MOVENTO BLUMOTION for MOVENTO TIP-ON BLUMOTION for MOVENTO
TANDEM BLUMOTION for TANDEM (full extension)
SERVO-DRIVE for drawers SERVO-DRIVE for drawers
4456
88
91011
1212
13
141415
1616
1818
2020212223
2424
25
2627
28
2930313233
34
HINGE systems CLIP top hinges Mounting plates / Cover caps BLUMOTION for HINGES / Unsprung Hinges / TIP-ON for Doors
AVENTOS lift systems AVENTOS HF / SERVO-DRIVE for AVENTOS HF AVENTOS HK / SERVO-DRIVE for AVENTOS HK TIP-ON for AVENTOS HK Long / Short AVENTOS HK-S / TIP-ON for AVENTOS HK-S AVENTOS HK-XS / TIP-ON for AVENTOS HK-XS AVENTOS HL SERVO-DRIVE for AVENTOS HL AVENTOS HS SERVO-DRIVE for AVENTOS HS SERVO-DRIVE for AVENTOS
The company Blum
Disclaimer: • All prices are subject to change without prior notice.• Installation, carpentry fees and other material costs are
not included in this price list.• All prices include GST.
Design element
Design element
Drawer – height M
Article No. Min. height required Load Bearing Price / Set
TBX-S1-50-30
98.5 mm
30 kg RM 243.00
TBX-S1-50-65 65 kg RM 279.00
Dra
wer
/ H
igh
front
ed p
ull-o
ut S
ets
Reminders
▬ ▬ Applicable to cabinet width of 300-1200 mm.▬ ▬ Cabinet profiles are included in the set. ▬ ▬ Design elements are excluded in the set price, please see page 6.
High fronted pull-out, with single gallery – height C
Article No. Min. height required Load Bearing Price / Set
TBX-S2-50-30
192 mm
30 kg RM 293.00
TBX-S2-50-65 65 kg RM 329.00
High fronted pull-out, with double gallery – height D
Article No. Min. height required Load Bearing Price / Set
TBX-S3-50-30
224 mm
30 kg RM 336.00
TBX-S3-50-65 65 kg RM 372.00
High fronted pull-out, with single gallery and design element – height C
Article No. Min. height required Load Bearing Price / Set
TBX-S6-50-30
192 mm
30 kg RM 308.00
TBX-S6-50-65 65 kg RM 344.00
High fronted pull-out, with single gallery and design element – height D
Article No. Min. height required Load Bearing Price / Set
TBX-S7-50-30
224 mm
30 kg RM 310.00
TBX-S7-50-65 65 kg RM 346.00
4 5
TANDEMBOX antaro Drawer / High fronted pull-outs
500 mm nominal length (NL) AG : Aluminium Grey SW : Silk White TB : Terra Black
500 mm nominal length (NL)
Design element
Design element
Inne
r dra
wer
/ In
ner p
ull-o
ut S
ets
Reminders
▬ ▬ Applicable to cabinet width of 300-1200 mm.▬ ▬ Cabinet profile, front piece and cross gallery are included in the set price. Design elements are excluded, please see page 6.▬ ▬ Nylon front fixings.
Inner drawer
Drawer – height M
Article No. Min. height required Load Bearing Price / Set
TBX-i3-50-30
106 mm
30 kg RM 355.00
TBX-i3-50-65 65 kg RM 391.00
Inner pull-out, with single gallery – height C
Article No. Min. height required Load Bearing Price / Set
TBX-i4-50-30
192 mm
30 kg RM 464.00
TBX-i4-50-65 65 kg RM 500.00
Inner pull-out, with double gallery – height D
Article No. Min. height required Load Bearing Price / Set
TBX-i5-50-30
224 mm
30 kg AG 510 RM SW: / TB 514 RM :
TBX-i5-50-65 65 kg AG 546 RM SW: / TB 550 RM :
Inner pull-out, with single gallery and design element – height C
Article No. Min. height required Load Bearing Price / Set
TBX-i8-50-30
192 mm
30 kg RM 480.00
TBX-i8-50-65 65 kg RM 516.00
Inner pull-out, with single gallery and design element – height D
Article No. Min. height required Load Bearing Price / Set
TBX-i9-50-30
224 mm
30 kg AG 483 RM SW: / TB 487 RM :
TBX-i9-50-65 65 kg AG 519 RM SW: / TB 523 RM :
4 5
Inner drawer / Inner pull-outs TANDEMBOX antaro
AG : Aluminium Grey SW : Silk White TB : Terra Black
Inner drawer - handle
Order No. Article No. Description Colour Price / pc
04276837
ZIF.80M5 To use with Inner drawer - height M
AG
RM 28 08611682 SW
08611684 TB
Glass Set - 2 pcs (untreated)
Order No. Article No. Dimension Type Price / Set
07291705Z37R467C
For Height C NL 500 mm
(S6 & i8)
Clear RM 80.00
03964623 Frosted RM 98.00
02291585Z37R467D
For Height D NL 500 mm
(S7 & i9)
Clear RM 95.00
01699007 Frosted RM 112.00
Acce
ssor
ies
Des
ign
elem
ent
Drawer – height M
Article No. Min. height required Load Bearing Price / Set
TBX-SU.S1-50-30
98.5 mm
30 kg AG 394 RM SW: / TB 412 RM :
TBX-SU.S1-50-65 65 kg AG 430 RM SW: / TB 448 RM :
High fronted pull-out, with double gallery – height D
Article No. Min. height required Load Bearing Price / Set
TBX-SU.S3-50-30
224 mm
30 kg AG 595 RM SW: / TB 612 RM :
TBX-SU.S3-50-65 65 kg AG 631 RM SW: / TB 648 RM :
6 7
Sink
uni
t Set
sTANDEMBOX antaro Accessories, Design elements and Sink units
▬ ▬ Applicable to cabinet width of 800-1200 mm.▬ ▬ Cabinet profiles are included in the set price.i
AG : Aluminium Grey SW : Silk White TB : Terra Black
TANDEMBOX antaro
6 7
500 mm nominal length (NL)
Sink unit Sets TANDEMBOX antaro
AG : Aluminium Grey SW : Silk White TB : Terra Black
Design element
BOXCAP
Dra
wer
/ H
igh
front
ed p
ull-o
ut S
ets
Inne
r dra
wer
/ In
ner p
ull-o
ut S
ets
Design element
Inner drawer
Drawer – height M
Article No. Min. height required Load Bearing Price / Set
TBX-S1-50-3098.5 mm
30 kg RM 243.00
TBX-S1-50-65 65 kg RM 279.00
High fronted pull-out, with BOXCAP – height D
Article No. Min. height required Load Bearing Price / Set
TBX-S4-50-30224 mm
30 kg RM 399.00
TBX-S4-50-65 65 kg RM 435.00
High fronted pull-out, with BOXCOVER and design element– height D
Article No. Min. height required Load Bearing Price / Set
TBX-S5-50-30224 mm
30 kg RM 351.00
TBX-S5-50-65 65 kg RM 387.00
Inner drawer – height M
Article No. Min. height required Load Bearing Price / Set
TBX-i3S-50-30106 mm
30 kg RM 407.00
TBX-i3S-50-65 65 kg RM 443.00
Inner pull-out, with BOXCAP – height D
Article No. Min. height required Load Bearing Price / Set
TBX-i6-50-30224 mm
30 kg RM 654.00
TBX-i6-50-65 65 kg RM 690.00
Inner pull-out, with BOXCOVER and design element – height D
Article No. Min. height required Load Bearing Price / Set
TBX-i7-50-30224 mm
30 kg RM 606.00
TBX-i7-50-65 65 kg RM 642.00
8 9
500 mm nominal length (NL)
BOXCAP
TANDEMBOX intivo Drawer / High fronted pull-outs andInner drawer / Inner pull-outs
AG : Aluminium Grey SW : Silk White TB : Terra Black
Reminders
▬ ▬ Applicable to cabinet width of 300-1200 mm.▬ ▬ Cabinet profile, front piece and cross gallery are included in the set price. Design elements are excluded, see below.▬ ▬ Metal front fixings.
8 9
Inner drawer - handle
Order No. Article No. Description Colour Price / pc
04276837
ZIF.80M5 To use with Inner drawer - height M
AG
RM 28.00 08611682 SW
08611684 TB
Acce
ssor
ies
Glass Set - 2 pcs (untreated)
Order No. Article No. Dimension Description Price / Set
06985304
Z37G440D For Height D NL 500 mm
Clear RM 101.00
02308700 Frosted RM 118.00 Des
ign
elem
ents
Accessories and Design elements TANDEMBOX intivo
AG : Aluminium Grey SW : Silk White TB : Terra Black
Reminders
▬ ▬ Applicable to cabinet width of 800-1200 mm.▬ ▬ Cabinet profiles are included in the set price. Design elements are excluded, see page 9.
BOXCAP
Drawer – height M
Article No. Min. height required Load Bearing Price / Set
TBX-SU.S1-50-30
98.5 mm
30 kg AG 394 RM SW: / TB 412 RM :
TBX-SU.S1-50-65 65 kg AG 430 RM SW: / TB 448 RM :
High fronted pull-out, with BOXCAP – height D
Article No. Min. height required Load Bearing Price / Set
TBX-SU.S4-50-30
224 mm
30 kg AG 656 RM SW: / TB 673 RM :
TBX-SU.S4-50-65 65 kg AG 692 RM SW: / TB 709 RM :
High fronted pull-out, with BOXCOVER – height D
Article No. Min. height required Load Bearing Price / Set
TBX-SU.S5-50-30
224 mm
30 kg AG 607 RM SW: / TB 624 RM :
TBX-SU.S5-50-65 65 kgAG 643 RM SW: / TB 660 RM :
10 11
Design element
500 mm nominal length (NL)
Sink
uni
t Set
sTANDEMBOX intivo Sink unit sets
AG : Aluminium Grey SW : Silk White TB : Terra Black
10 11
SPACE CORNER and Design elements
TANDEMBOX intivo
BOXCAP
Design element
650 mm nominal length (NL)
Drawer – height M
Article No. Min. height required Load Bearing Price / Set
TBX-CC.S1-65-65 101.5 mm 65 kgAG 426 RM : SW 427 RM : TB 421 RM :
High fronted pull-out, with BOXCAP – height D
Article No. Min. height required Load Bearing Price / Set
TBX-CC.S4-65-65 228 mm 65 kg AG 611 RM SW: / TB 619 RM :
High fronted pull-out, with BOXCOVER for design element – height D
Article No. Min. height required Load Bearing Price / Set
TBX-CC.S5-65-65 228 mm 65 kgAG 541 RM SW: / TB 535 RM :
SPAC
E C
OR
NER
Set
s
Glass Set - 2 pcs (untreated)
Order No. Article No. Dimension Description Price / Set
05285324
Z37G590D For Height D NL 650 mm
Clear RM 118
06152592 Frosted RM 170 Des
ign
elem
ents
AG : Aluminium Grey SW : Silk White TB : Terra Black
Reminders
▬ ▬ Cabinet profiles are included in the set price. Design elements are sold separately, see below for the prices.
Drawer – height M
Article No. Min. height required Load Bearing Price / Set
LBX-S1-50-40
106 mm
40 kg RM 324.50
LBX-S1-50-70 70 kg RM 362.50
High fronted pull-out – height C
Article No. Min. height required Load Bearing Price / Set
LBX-S4-50-40
193 mm
40 kg RM 415.50
LBX-S4-50-70 70 kg RM 453.50
High fronted pull-out – height F
Article No. Min. height required Load Bearing Price / Set
LBX-S4XL-50-40
257 mm
40 kg RM 577.00
LBX-S4XL-50-70 70 kg RM 615.00
Inner drawer – height M
Article No. Min. height required Load Bearing Price / Set
LBX-i3-50-40109 mm
40 kg RM 490.00
LBX-i3-50-70 70 kg RM 528.00
Inner pull-out – height C
Article No. Min. height required Load Bearing Price / Set
LBX-i6-50-40191 mm
40 kg RM 657.00
LBX-i6-50-70 70 kg RM 695.00
12 13
OG : Orion Grey SW : Silk White500 mm nominal length (NL)
Inner drawer
▬ ▬ Applicable to cabinet width of 300-1200 mm.▬ ▬ Cabinet profile, front piece and cross gallery are included in the set price.i
Dra
wer
/ H
igh
front
ed p
ull-o
ut S
ets
Inne
r dra
wer
/ In
ner p
ull-o
ut S
ets
LEGRABOX pure Drawer / High fronted pull-out / Inner drawer / Inner pull-out
High fronted pull-out – height C
Article No. Min. height required Load Bearing Price / Set
LBX-SU.S4-50-40
193 mm
40 kg RM 675.50
LBX-SU.S4-50-70 70 kg RM 713.50
12 13
Inner drawer - latch
Order No. Article No. Colour Price / pc
05209105
ZI7.0M07
OG
RM 39.00
09717615 SW
Acce
ssor
ies
Sink
uni
t Set
▬ ▬ Applicable to cabinet width of 800-1200 mm.▬ ▬ Cabinet profiles are included in the set price.i
Accessories and Sink unit LEGRABOX pure
▬ ▬ Applicable to cabinet width of 300-1200 mm.i
14 15
BLU
MO
TIO
N fo
r MO
VEN
TO
760H - 40 kg
Article No. Nominal Length (mm) Price / Set
MOV-760-27-B 270
RM 214.00 MOV-760-30-B 300
MOV-760-35-B 350
MOV-760-40-B 400 RM 216.00
MOV-760-45-B 450 RM 218.00
MOV-760-50-B 500 RM 220.00
40 KG
60 KG
Reminders
▬ ▬ Applicable to cabinet width of 300-1200 mm.
Locking device included
Locking device included
MOVENTO BLUMOTION
766H - 60 kg
Article No. Nominal Length (mm) Price / Set
MOV-766-45-B 450 RM 254.00
MOV-766-50-B 500 RM 256.00
MOV-766-55-B 550 RM 267.00
MOV-766-60-B 600 RM 290.00
MOV-766-65-B 650 RM 301.00
MOV-766-70-B 700 RM 322.00
MOV-766-75-B 750 RM 349.00
14 15
766H - 60 kg
Article No. Nominal Length (mm) Price / Set
MOV-766-45-M 450 RM 256.00
MOV-766-50-M 500 RM 258.00
MOV-766-55-M 550 RM 269.00
TIP-ON BLUMOTION Set, unit with latch (NL: 350 - 750 mm)
Order No. Article No. Model Description Price / Set
02234802 T60L7340 L1 For 0 - 20 kg
RM 109.00 01365128 T60L7540 L3 For 5 - 40 kg
09133117 T60L7570 L5 For 25 - 70 kg
TIP-
ON
BLU
MO
TIO
N fo
r MO
VEN
TO
TIP-ON BLUMOTION Set, unit with latch (NL: 300 mm only)
Order No. Article No. Model Description Price / Set
02356190 T60L7040 S0 For 0 - 10 kgRM 109.00
03451357 T60L7140 S1 For 10 - 20 kg
TIP-ON BLUMOTION synchronisation linkage
Order No. Article No. Length Price / Set
02101757 T60.1125 1125 mm cut to size RM 25.50
40 KG
60 KG
Adapter & locking device included
Adapter & locking device included
TIP-ON BLUMOTION MOVENTO
POSISTOP and depth adjustment
Order No. Article No. Length Description Price / Set
07646995 298.7600 71.6 mm For MOVENTO locking device RM 28.00
760H - 40 kg
Article No. Nominal Length (mm) Price / Set
MOV-760-30-M 300RM 215.00
MOV-760-35-M 350
MOV-760-40-M 400 RM 217.00
MOV-760-45-M 450 RM 219.00
MOV-760-50-M 500 RM 221.00
BLU
MO
TIO
N fo
r TAN
DEM
(ful
l ext
ensi
on)
Reminders
▬ ▬ Applicable to cabinet width of 300 - 1200 mm.
566H - 50 kg
Article No. Nominal Length (mm) Price / Set
TAN-566-45-B 450 RM 212.00
TAN-566-50-B 500 RM 214.00
TAN-566-55-B 550 RM 221.00
30 KG
50 KG
Locking device included
Locking device included
16
TANDEM BLUMOTION (Full extension)
560H - 30 kg
Article No. Nominal Length (mm) Price / Set
TAN-560-27-B 270
RM 175.00 TAN-560-30-B 300
TAN-560-35-B 350
TAN-560-40-B 400 RM 177.00
TAN-560-45-B 450 RM 179.00
TAN-560-50-B 500 RM 181.00
17
TANDEM and MOVENTO assembly devices Runner systems
SERVO-DRIVE SERVO-DRIVE for drawers
18 19
5
3
2
6
4
1
5
3
1
2
6
4
3
1
4
2
1 drawer Set
Order No. Article No. Contents Qty Price / Set
33015813 SD1
1) Drive unit 1
RM 576
2) Distance bumper 4
3) 1-tier attachment bracket 1
4) Connecting node 1
Cable end protector 2
Cable clip 5
2 drawer Set
Order No. Article No. Contents Qty Price / Set
33011010 SD2
1) Drive unit 2
RM 1322
2) Distance bumper 8
3) Bracket profile without cable 1
4) Top bracket profile adapter 1
5) Bottom bracket profile adapter 1
6) Connecting node 1
Cable end protector 2
Cable clip 5
3 drawer Set
Order No. Article No. Contents Qty Price / Set
33011028 SD3
1) Drive unit 3
RM 1782
2) Distance bumper 123) Bracket profile without cable 14) Top bracket profile adapter 15) Bottom bracket profile adapter 16) Connecting node 1
Cable end protector 2Cable clip 5
5
3
2
6
4
1
4 drawer Set
Order No. Article No. Contents Qty Price / Set
33011036 SD4
1) Drive unit 4
RM 2215
2) Distance bumper 123) Bracket profile without cable 14) Top bracket profile adapter 15) Bottom bracket profile adapter 16) Connecting node 1
Cable end protector 2Cable clip 5
SER
VO-D
RIV
E fo
r dra
wer
s
SERVO-DRIVESERVO-DRIVESERVO-DRIVE for drawers
18 19
SPACE-TOWER 5 drawer Set
Order No. Article No. Contents Qty Price / Set
33007951 SD5
1) Drive unit 5
RM 2658
2) Bracket profile top adapter 1
3) Bracket profile bottom adapter 2
4) Bracket profile back adapter 1
5) Bracket profile cover cap 1
6) Connecting node 2
7) Bracket profile without cable 2
Cable end protector 4
Cable clip 5
1
6
4
3
1
4
3
25
Sink unit Set - 2 drawers
Order No. Article No. Contents Qty Price / Set
33014001 SDSU2
1) Drive unit 2
RM 1170
2) Distance bumper 8
3) 2-tier attachment bracket 1
4) 1-tier attachment bracket 1
5) Connecting node 2
Cable end protector 4
Cable clip 5
5
2
7
Reminders
▬ ▬ All set prices exclude Transformer set. See below.▬ ▬ One (1) Transformer set can operate a maximum of 50 drawer drive units.
SER
VO-D
RIV
E fo
r dra
wer
s
3
1
2
4
5
Transformer Set - wall mounted
Order No. Article No. Contents Qty Price / Set
33006547 SD-T-W
1) Blum transformer 1
2) Transformer
RM 907
housing 1
3) Flex cord UK 1
4) Distribution cable - 6m 1
5) Connecting node 1
Tran
sfor
mer
Set
Hinge systems CLIP top hinges
20 21
60° bi-fold hinge
Order No. Article No. Description Price / Pc
06466533 79T8500 CLIP top with spring RM 28.20
CLI
P to
p hi
nges
(Max
doo
r wid
th: 6
00 m
m)
155° wide angle hinge, 0 - protrusion
Order No. Article No. Description Price / Pc
09075903 71T7500N CLIP top with spring RM 33.83
01075843 71T7500N CLIP top with spring, onyx black RM 38.10
95° profile door hinge
Order No. Article No. Description Price / Pc
09349303 71B9550 CLIP top BLUMOTION RM 25.00
08701018 71B9550 CLIP top BLUMOTION, onyx black RM 26.70
03805303 71T9550 CLIP top with spring RM 12.71
170° wide angle hinge
Order No. Article No. Description Price / Pc
03703643 71T6550 CLIP top with spring RM 22.06
107° hinge
Order No. Article No. Description Price / Pc
04243508 75B1550 CLIP top BLUMOTION RM 18.44
04518926 75B1550 CLIP top BLUMOTION, onyx black
RM 20.14
03439793 75T1550 CLIP top with spring RM 7.03
Onyx black
20 21
Mounting plates with 0 mm spacing
Order No. Article No. Description Price / Pc
01037431 175H3100 Straight with cam height adjustment RM 3.62
09594813 175H3100 Straight with cam height adjustment, onyx black RM 3.98
02364043 173H7100 Cruciform with cam height adjustment RM 3.46
05308016 174H7100Cruciform with cam height adjustment
expando, onyx blackRM 4.55
01925383 173L6100Cruciform with height
adjustment (elongated hole)
RM 1.34
Mou
ntin
g pl
ates
Cov
er c
aps
?
?
Hinge boss cover cap
Order No. Article No. Description Price / Pc
09003173 70T3504 For 95°/107°CLIP TOP BLUMOTION RM 0.84
01220669 70T3504 For 95°/107°, onyx blackCLIP top BLUMOTION RM 1.30
04024443 70T1504 For 95°/107°CLIP top RM 0.84
?
Hinge arm cover cap
Order No. Article No. Description Price / Pc
03445333 70.1503 For 107°, BLUM stamped RM 0.57
06954352 70.1503 For 107°, onyx black, BLUM stamped RM 0.88
09238533 70.7503.BP For 155° BLUM stamped
RM 0.51
03460453 80.6507.BP For 170° BLUM stamped
Onyx black
Mounting plates and Cover caps Hinge systems
Reminders
▬ ▬ All hinge doors are applicable for maximum width of 600 mm.
Hinge systems BLUMOTION for hinges andUnsprung hinges
22 23
155° wide angle hinge, 0 - protrusion
Order No. Article No. Description Price / Pc
09141613 70T7500N CLIP top w/o spring RM 34.51
02060031 70T7500N CLIP top w/o spring, onyx black RM 40.37
95° profile door hinge
Order No. Article No. Description Price / Pc
07655043 70T9550 CLIP top w/o spring RM 13.36
07387474 70T9550 CLIP top w/o spring, onyx black RM 15.07
Uns
prun
g hi
nges
107 ° hinge
Order No. Article No. Description Price / Pc
07657333 74T1550 CLIP top w/o spring RM 7.62
170° wide angle hinge
Order No. Article No. Description Price / Pc
03733983 70T6550 CLIP top w/o spring RM 22.65
BLU
MO
TIO
N fo
r hin
ges
BLUMOTION for hinges
Order No. Article No. Description Price / Pc
07196933 973A0500.01 For CLIP top 95° and 107°
RM 10.45
08975873 973A7000 For CLIP top 155°
09522369 973A7000 For CLIP top 155°, onyx black RM 11.24
07085783 973A6000 For CLIP top 170° MR 33.61
06823663 971A0500 Cruciform BLUMOTION RM 18.90
Onyx black
TIP-ON for doors Hinge systems
22 23
TIP-
ON
for
doo
rs
TIP-ON sets straight, short
Order No. Article No. Description Colour Price / Set
33009864
956.1200S
▬ ▬ For use with unsprung Blum hinges PG
RM 30.00 33009856 ▬ ▬ For overlaping doors up to 1300 mm SW
33009872 ▬ ▬ Output path approx. 18 mm TB
TIP-ON sets straight, long
Order No. Article No. Description Colour Price / Set
33009899
956A1200S
▬ ▬ For use with unsprung Blum hinges PG
RM 36.00 33009881 ▬ ▬ For front height above 1300 mm SW
33009902 ▬ ▬ Output path approx. 38 mm TB
TIP-ON sets cruciform, short
Order No. Article No. Description Colour Price / Set
33013501 956.1500S
▬ ▬ For use with unsprung Blum hinges
PG RM 28.00 ▬ ▬ For front height up to 1300 mm
▬ ▬ Output path approx. 18 mm
TIP-ON sets cruciform, long
Order No. Article No. Description Colour Price / Set
33013497 956A1500S
▬ ▬ For use with unsprung Blum hinges
PG RM 34.00 ▬ ▬ For front height above 1300 mm
▬ ▬ Output path approx. 38 mm
PG : Platinum grey SW : Silk White TB : Terra Black
Cruciform adapter plate
Cruciform adapter plate
24 25
AVEN
TOS
HF
Set
Power factor = front height [mm] x front weight bottom and top incl. handle [kg] i
AVT-HF-28
AVT-HF-25
AVT-HF-22
2600 5350 5500 172509000 10150
Pow
er fa
ctor
Reminders
▬ ▬ Front height : 480 - 1040 mm, front width: up to 1800 mm.▬ ▬ It is recommended to use a stronger lift mechanism if power factor range is overlapping.▬ ▬ Set prices for SERVO-DRIVE exclude Transformer set. See page 33.
LG : Light GreySW : Silk White
AVENTOS lift systems AVENTOS HF / SERVO-DRIVE for AVENTOS HF
AVENTOS HF
Power FactorCabinet height
480 - 570 mm 456 - 710 mm 700 - 900 mm 760 - 1040 mm
2600 - 5500AVT-HF-22-32 AVT-HF-22-35 AVT-HF-22-38 AVT-HF-22-39
LG: 553.00 RM SW: 558.00 RM
LG: 569.00 RM SW: 574.00 RM
LG: 601.00 RM SW: 606.00 RM
LG: 625.00 RM SW: 630.00 RM
5350 - 10150 AVT-HF-25-32 AVT-HF-25-35 AVT-HF-25-38 AVT-HF-25-39
LG: 576.00 RM SW: 581.00 RM
LG: 592.00 RM SW: 597.00 RM
LG: 624.00 RM SW: 629.00 RM
LG: 648.00 RM SW: 653.00 RM
9000 - 17250AVT-HF-28-32 AVT-HF-28-35 AVT-HF-28-38 AVT-HF-28-39LG: 608.00 RM SW: 612.00 RM
LG: 624.00 RM SW: 628.00 RM
LG: 656.00 RM SW: 660.00 RM
LG: 680.00 RM SW: 684.00 RM
SERVO-DRIVE for AVENTOS HF
Power FactorCabinet height
480 - 570 mm 456 - 710 mm 700 - 900 mm 760 - 1040 mm
2600 - 5500AVT-HF-22-32-SD AVT-HF-22-35-SD AVT-HF-22-38-SD AVT-HF-22-39-SDLG: 2443.00 RM SW: 2467.00 RM
LG: 2459.00 RM SW: 2483.00 RM
LG: 2491.00 RM SW: 2515.00 RM
5350 - 10150 AVT-HF-25-32-SD AVT-HF-25-35-SD AVT-HF-25-38-SD AVT-HF-25-39-SD
LG: 2515.00 RM SW: 2539.00 RM
LG: 2466.00 RM SW: 2490.00 RM
LG: 2482.00 RM SW: 2506.00 RM
LG: 2514.00 RM SW: 2538.00 RM
9000 - 17250AVT-HF-28-32-SD AVT-HF-28-35-SD AVT-HF-28-38-SD AVT-HF-28-39-SD
LG: 2538.00 RM SW: 2562.00 RM
LG: 2498.00 RM SW: 2521.00 RM
LG: 2514.00 RM SW: 2537.00 RM
LG: 2546.00 RM SW: 2569.00 RM
LG: 2570.00 RM SW: 2593.00 RM
SER
VO-D
RIV
E fo
r AVE
NTO
S H
F
24 25
LG : Light GreySW : Silk White
AVENTOS HK / SERVO-DRIVE for AVENTOS HK AVENTOS lift systems
Reminders
▬ ▬ Front height: Up to 600 mm. Front width: Up to 1800 mm.▬ ▬ It is recommend to use a stronger lift mechanism if power factor range is overlapping.▬ ▬ Set prices for SERVO-DRIVE exclude Transformer set. See page 33.
AVEN
TOS
HK
Set
Power factor = front height [mm] x front weight incl. double handle weight [kg] i
AVT-HK-23
AVT-HK-25
AVT-HK-27
AVT-HK-29
480 750 1500 2500 3200 4900 9000
Pow
er F
acto
r
AVENTOS HK
Article No. Power Factor Price / Set
AVT-HK-23 480 - 1500 LG: 301.00 RM SW: 305.00 RM
AVT-HK-25 750 - 2500 LG: 301.00 RM SW: 305.00 RM
AVT-HK-27 1500 - 4900 LG: 314.00 RM SW: 319.00 RM
AVT-HK-29 3200 - 9000LG: 462.00 RM SW: 466.00 RM
SER
VO-D
RIV
E fo
r AVE
NTO
S H
K SERVO-DRIVE for AVENTOS HK
Article No. Power Factor Price / Set
AVT-HK-23-SD 480 - 1500
AVT-HK-25-SD 750 - 2500
LG: 2355.00 RM SW: 2378.00 RM
AVT-HK-27-SD 1500 - 4900
LG: 2355.00 RM SW: 2378.00 RM
AVT-HK-29-SD 3200 - 9000
LG: 2368.00 RM SW: 2392.00 RM
LG: 2516.00 RM SW: 2539.00 RM
26 27
TIP-
ON
for A
VEN
TOS
HK
Reminders▬ ▬ Front height: Up to 600 mm. Front width up to 1800 mm.▬ ▬ It is recommend to use a stronger lift mechanism if power factor range is overlapping.▬ ▬ TIP-ON set is included in the above set prices.
Power factor = front height [mm] x front weight [kg]i
AVT-HK-29
AVT-HK-27
AVT-HK-25
AVT-HK-23
480 750 1500 2500 3200 4900 9000
Pow
er F
acto
rAVENTOS lift systems TIP-ON for AVENTOS HK
LG : Light GreySW : Silk White
TIP-ON for AVENTOS HK - Long
Article No. Power Factor Price / Set
AVT-HK-23-TL 480 - 1500LG: 360.00 RM SW: 365.00 RM
AVT-HK-25-TL 750 - 2500
AVT-HK-27-TL 1500 - 4900 LG: 412.00 RM SW: 417.00 RM
AVT-HK-29-TL 3200 - 9000 LG: 560.00 RM SW: 564.00 RM
TIP-ON for AVENTOS HK - Short
Article No. Power Factor Price / Set
AVT-HK-23-TS 480 - 1500LG: 354.00 RM SW: 359.00 RM
AVT-HK-25-TS 750 - 2500
AVT-HK-27-TS 1500 - 4900 LG: 406.00 RM SW: 411.00 RM
AVT-HK-29-TS 3200 - 9000LG: 554.00 RM SW: 558.00 RM
26 27
AVENTOS HK-S AVENTOS lift systems
LG : Light GreySW : Silk White
Reminders▬ ▬ Maximum front height: 600 mm.▬ ▬ It is recommend to use a stronger lift mechanism if power factor range is overlapping.
AVT-HKS-2E
AVT-HKS-2D
AVT-HKS-2C
AVT-HKS-2B
Power factor = front height [mm] x front weight bottom and top incl. handle [kg]i
220 400 500 680 960 1000 22151520
Pow
er F
acto
rAV
ENTO
S H
K-S
AVENTOS HK-S Set
Article No. Power Factor Price / Set
AVT-HKS-2B 220 - 500 LG: 156.00 RM SW: 161.00 RM
AVT-HKS-2C 400 - 1000
LG: 172.00 RM SW: 177.00 RM AVT-HKS-2D 680 - 1520
AVT-HKS-2E 960 - 2215
TIP-ON for AVENTOS HK-S - Short
Article No. Power Factor Price / Set
AVT-HKS-2B-TS 220 - 500 LG: 185.00 RM SW: 190.00 RM
AVT-HKS-2C-TS 400 - 1000
LG: 203.00 RM SW: 208.00 RM
AVT-HKS-2D-TS 680 - 1520
AVT-HKS-2E-TS 960 - 2215
TIP-ON for AVENTOS HK-S - Long
Article No. Power Factor Price / Set
AVT-HKS-2B-TL 220 - 500 LG: 191.00 RM SW: 196.00 RM
AVT-HKS-2C-TL 400 - 1000
LG: 209.00 RM SW: 214.00 RM
AVT-HKS-2D-TL 680 - 1520
AVT-HKS-2E-TL 960 - 2215
TIP-
ON
for A
VEN
TOS
HK-
S
28 29
Reminders
▬ ▬ Front height: 240 - 600 mm. Minimum interior depth: 125 mm▬ ▬ It is recommend to use a stronger lift mechanism if power factor range is overlapping.▬ ▬ TIP-ON set is included in the TIP-ON for AVENTOS HK-XS set price.
AVENTOS HK-XS
Article No. Power Factor Price / Set
AVT-HKXS-11 200 - 1000
RM 119.00 AVT-HKXS-13 500 - 1500
AVT-HKXS-15 800 - 1800
AVEN
TOS
HK-
XS
Power factor = front height [mm] x front weight bottom and top incl. handle [kg]i
AVT-HKXS-15
AVT-HKXS-13
AVT-HKXS-11
200 500 800 1000 1500 1800
Pow
er F
acto
rAVENTOS lift systems AVENTOS HK-XS /
TIP-ON for AVENTOS HK-XS
TIP-
ON
for A
VEN
TOS
HK-
XS TIP-ON for AVENTOS HK-XS
Article No. Power Factor Price / Set
AVT-HKXS-11-TS 200 - 1000
RM 134.00 AVT-HKXS-13-TS 500 - 1500
AVT-HKXS-15-TS 800 - 1800
LG : Light GreySW : Silk White
28 29
AVENTOS HL AVENTOS lift systems
LG : Light GreySW : Silk White
Reminders
▬ ▬ Front height: 300 - 580 mm. Front width: Up to 1800 mm.▬ ▬ For cabinet width 1219 mm and above, additional cross stabilizer rod and connection piece are required.▬ ▬ Lever arms and cross stabiliser are included in the set price.
AVEN
TOS
HL
Cabinet Height300 - 349 mm 350 - 399 mm 400 - 550 mm 450 - 580 mm
Lever arm set20L3200.06 20L3500.06 20L3800.06 20L3900.06
21L3200.01 21L3500.01 21L3800.01 21L3900.01
1.25 – 4.25 kg 1.25 – 2.50 kg - -
3.50 – 7.25 kg 1.75 – 5.00 kg 1.75 – 3.50 kg -
6.50 – 12.00 kg 4.25 – 9.00 kg 2.75 – 6.75 kg 2.00 – 5.25 kg
11.00 – 20.00 kg 8.00 – 14.75 kg 5.75 – 11.75 kg 4.25 – 9.25 kg
- 13.50 – 20.00 kg 10.50 – 20.00 kg 8.25 – 16.50 kg
Lift mechanism set20L2101
20L2301
20L2501
20L2701
20L2901
: SERVO-DRIVE
: Standard
AVENTOS HL
Lift mechanism set
Article No.
Price
20L2101AVT-HL-21-32 AVT-HL-21-35 - -
LG:SW: 647 RM
642 RM LG: 652 RM SW: 657 RM - -
20L2301AVT-HL-23-32 AVT-HL-23-35 AVT-HL-23-38 AVT-HL-23-39
LG: 642 RM SW: 647 RM
LG: 652 RM SW: 657 RM
LG: 662 RM SW: 667 RM
LG: 687 RM SW: 692 RM
20L2501AVT-HL-25-32 AVT-HL-25-35 AVT-HL-25-38 AVT-HL-25-39
LG: 674 RM SW: 679 RM
LG: 684 RM SW: 689 RM
LG: 694 RM SW: 699 RM
LG: 719 RM SW: 724 RM
20L2701AVT-HL-27-32 AVT-HL-27-35 AVT-HL-27-38 AVT-HL-27-39
LG: 674 RM SW: 679 RM
LG: 684 RM SW: 689 RM
LG: 694 RM SW: 699 RM
LG: 719 RM SW: 724 RM
20L2901AVT-HL-29-32 AVT-HL-29-35 AVT-HL-29-38 AVT-HL-29-39
LG: 903 RM SW: 908 RM
LG: 913 RM SW: 918 RM
LG: 923 RM SW: 928 RM
LG: 948 RM SW: 953 RM
30 31
LG : Light GreySW : Silk White
AVENTOS lift systems SERVO-DRIVE for AVENTOS HL
Reminders
▬ ▬ Set prices exclude Transformer set, see page 33
SE
RV
O-D
RIV
E fo
r AV
EN
TOS
HL
SERVO-DRIVE for AVENTOS HL
Lift mechanism set
Article No.
Price
20L2100.05AVT-HL-21-32-SD AVT-HL-21-35-SD - -
LG: 2613 RM SW: 2637 RM
- -
20L2300.05 AVT-HL-23-32-SD AVT-HL-23-35-SD AVT-HL-23-38-SD AVT-HL-23-39-SD
LG: 2623 RM SW: 2647 RM
LG: 2613 RM SW: 2637 RM
LG: 2623 RM SW: 2647 RM
LG: 2632 RM SW: 2651 RM
20L2500.05AVT-HL-25-32-SD AVT-HL-25-35-SD AVT-HL-25-38-SD AVT-HL-25-39-SD
LG: 2658 RM SW: 2682 RM
LG: 2645 RM SW: 2669 RM
LG: 2655 RM SW: 2679 RM
LG: 2664 RM SW: 2688 RM
20L2700.05AVT-HL-27-32-SD AVT-HL-27-35-SD AVT-HL-27-38-SD AVT-HL-27-39-SD
LG: 2690 RM SW: 2714 RM
LG: 2645 RM SW: 2669 RM
LG: 2655 RM SW: 2679 RM
LG: 2664 RM SW: 2688 RM
20L2900.05AVT-HL-29-32-SD AVT-HL-29-35-SD AVT-HL-29-38-SD AVT-HL-29-39-SD
LG: 2690 RM SW: 2714 RM
LG: 2874 RM SW: 2898 RM
LG: 2884 RM SW: 2908 RM
LG: 2893 RM SW: 2917 RM
LG: 2919 RM SW: 2943 RM
30 31
AVENTOS HS AVENTOS lift systems
AVENTOS HS
Cabinet Front height (mm)
Cabinet front weight (kg) Article No. Price / Set
350 - 525
2.5 - 5.0 AVT-HS-2ALG: 643 RM SW: 648 RM 3.25 - 9.5 AVT-HS-2B
7.25 - 10.5 AVT-HS-2C LG: 675 RM SW: 680 RM
526 - 675
3.0 - 6.75 AVT-HS-2D LG: 643 RM SW: 648 RM
5.0 - 13 AVT-HS-2E LG: 675 RM SW: 680 RM
9.75 - 16.5 AVT-HS-2F LG: 904 RM SW: 909 RM
676 - 800
4.0 - 8.0 AVT-HS-2G LG: 675 RM SW: 680 RM
6.0 - 13.5 AVT-HS-2H
10.5 - 21.5 AVT-HS-2I LG: 904 RM SW: 909 RM
AVEN
TOS
HS
Reminders
▬ ▬ Front height: 350 - 800 mm. Front width: Up to 1800 mm.▬ ▬ For cabinet width 1219 mm and above, additional cross stabilizer rod and connection piece are required.▬ ▬ Lever arms and cross stabiliser are included in the set price.
LG : Light GreySW : Silk White
32 33
AVENTOS lift systems SERVO-DRIVE for AVENTOS HS
SERVO-DRIVE for AVENTOS HS
Cabinet Front height (mm)
Cabinet front weight (kg) Article No. Price / Set
350 - 525
2.5 - 5.0 AVT-HS-2A-SD
3.25 - 9.5 AVT-HS-2B-SD
7.25 - 10.5 AVT-HS-2C-SD
LG: 2667 RM SW: 2691 RM
LG: 2699 RM SW: 2723 RM
526 - 675
3.0 - 6.75 AVT-HS-2D-SD LG: 2667 RM SW: 2691 RM
5.0 - 13 AVT-HS-2E-SD LG: 2699 RM SW: 2723 RM
9.75 - 16.5 AVT-HS-2F-SD LG: 2928 RM SW: 2952 RM
676 - 800
4.0 - 8.0 AVT-HS-2G-SD
6.0 - 13.5 AVT-HS-2H-SD
10.5 - 21.5 AVT-HS-2I-SD
LG: 2699 RM SW: 2723 RM
LG: 2928 RM SW: 2952 RM
Reminders
▬ ▬ Set prices exclude Transformer set, see page 33. ▬ ▬ Lever arms and cross stabiliser are included in the set price.
SER
VO-D
RIV
E fo
r AVE
NTO
S H
S
LG : Light GreySW : Silk White
32 33
SERVO-DRIVE for AVENTOS AVENTOS lift systems
Distance bumper
Order No. Article No. Description Pcs Price / Pc
07402930 993.0830.01
AVENTOS HF 6
RM 5.00 AVENTOS HS 4
AVENTOS HL 4
AVENTOS HK 4
SERVO-DRIVE switch
Order No. Article No. Colour Price / Pc
08978398
21P5020
LGLG: 200 RM SW: 208 RM
08978392 SW
5
2
1
3
4
SER
VO-D
RIV
E fo
r AVE
NTO
S
Transformer Set - wall mounted
Order No. Article No. Contents Quantity Price / Set
33006547 SD-T-W
1) Blum transformer 1
RM 907.00
2) Transformer housing 1
3) Flex cord UK 1
4) Distribution cable - 6m 1
5) Connecting node 1
Reminders
▬ ▬ One transformer can be used for up to 16 SERVO-DRIVE AVENTOS units.
LG : Light GreySW : Silk White
BlumFounded over 60 years ago by Julius Blum, today Blum is an internationally active family-owned company. Its strategic business segments include lift, hinge and pull-out systems. All our product developments focus on perfecting motion.
Blum in Austria and around the world
The company has seven plants in Vorarlberg, Austria, additional production sites in Poland, the USA and Brazil and 28 subsidia-ries/representative offices. Blum supplies more than 120 markets. The Blum Group employs 6,900 people in total, 5,300 of whom work in Vorarlberg.
Innovations
To support customers with innovative fittings solutions and secure long-term success for the company, we need to consistently invest in research and develop-ment, in plants and facilities and in employee training. With more than 2,600 patents worldwide, Blum is one of Austria‘s most innovative companies.
DYNAMIC SPACE
Good workflows, optimum use of storage space and high quality of motion are important features of a practical kitchen. Blum's ideas for practical kitchen are designed to bring function, convenience and ergonomics to furniture interiors.
Environment
At Blum, we believe that respon-sible ecological behaviour has long-term economic benefits. The longevity of products is just one of many important aspects. Other important measures include the use of environmentally friendly processes, the intelligent use of materials and prudent energy management.
Quality
At Blum, the comprehensive concept of quality does not only apply to products. Services and our cooperation with customers and partners should also meet the same quality requirements.
Global customer benefits
"Whether manufacturer, distribu-tor, fitter or kitchen user – every-body should personally enjoy the benefits of Blum products" – that is Blum's philosophy on global customer benefits.
All content is copyrighted by Blum
. Su
bject to modifications and changes without notice.
Prin
ted
in S
inga
pore
.ID
NR
019
5086
9 E
P-41
3/EN
-SG
SET
PRIC
EGU
IDEM
Y
Kitch (M) Sdn Bhd (566346-V)Head Office:8 Jalan Industri PBP 5, Taman IndustriPusat Bandar Puchong47100 Selangor, MalaysiaTel.: (603) 5882 5533 Fax: (603) 5882 6267
Showroom – PJ:11 Jalan Dato Abu Bakar (16/1)46350 Petaling JayaTel.: (603) 7954 2522 Fax: (603) 7954 2521
Showroom – Old Klang Road:85 Jalan Klang Lama, Batu 358000 Kuala Lumpur, MalaysiaTel.: (603) 7982 8233 Fax: (603) 7981 4102
Showroom – Penang:170 Jalan Kelawai10250 PenangTel.: (604) 226 3232Fax: (604) 226 3636
Showroom – JB:28 Jalan Pertama 3Pusat Perdagangan Danga Utama81300 Johor Bahru, JohorTel.: (607) 557 7988 Fax: (607) 557 7488