Making the Right Connection Again and Again EPC TECTITE_f… · benefits to the push fit system....
Transcript of Making the Right Connection Again and Again EPC TECTITE_f… · benefits to the push fit system....
Making the Right Connection Again and Again
ThE “PuSh-FIT” JOINING SySTEm FOR ½” – 2” L INES QQ
For PEX tube installations, the use of the included tube liner is required. The use of solder, flux, heat or special pressing tools is eliminated with TECTITE™ fittings. This reduces cost of materials (solder, flux, and torch fuel), insurance cost (due to “hot Work” permits) and time required on-site for adhesive curing and system flushing. TECTITE™ is a removable and reusable fitting system that provides the ultimate in flexibility in plumbing system assembly.
• Push fit
• Tool free
• Standard and low lead designs
• Ideal for service and repair
• ½" – 2" diameter potable water* systems
• Demounting sleeve/end cap acts as a guide ensuring straight insertion
• True “O-ring” design for leak free seals
• Pre-lubed for quick installation
The TEcTiTETm System Advantage
TECTITE™ fittings are a heat free method for joining
Copper, CPVC and PEX tube, are designed to save time
and money on installations. Installing a TECTITE™ joint is
simple and requires no extra materials beyond the fitting.
NO NO
NONO
NO NO
NONOHeat FreeReduces fire hazardUtilizes push fit technology
b e n e f i t s t o t h e p u s h f i t s y s t e m
TecTITe™ fittings provide plumbing sys-
tem design flexibility by allowing you to
join copper, cPVc or PeX lines with just
one fitting.
The fittings simply push together in seconds to create
a perfect joint. No torches and no solder are required.
They are designed to join lines from ½" to 2", meet
a wide variety of plumbing codes and can be used in
potable water* heating, chilled water systems and com-
pressed air applications.
And when your design specifications change, simply
remove the fitting and reuse it in any other part of the
system for a clean and efficient installation. What’s more
TECTITE™ fittings carry a 50-year warranty. So the next
time you need to make the right connection over and over
again, choose TECTITE™ fittings from Elkhart Products
Corporation. potable Water system installation* Total installation cost is calculated as copper, labor, and fittings. Actual savings may vary.
Labor
Copper
Fittings & Misc.
Reduce installation time by 1/3!
teCtite saves you time & money
Save 20% on total installation cost *
Labor
Copper
Fittings & Misc.
* 1¼” - 2” standard fittings must not be used in hot potable water applications.
Material compatibilityTECTITE™ fittings are designed to operate at temperatures from 0° to 250°F at a maximum
working pressure of 200 psi. TECTITE™ fittings are designed for use with ASTm B88 hard
drawn and annealed Copper tube, type K, L, or m, CPVC water tube per ASTm D2846/2846m,
and PEX tube per ASTm F876 & F877, in the 1/2” to 2” size range. All TECTITE™ fittings
carry a 50-year warranty against manufacturing defects.
Grips and Holds copper, cPVc and PEX.The fittings should be installed at a minimum of 2" apart to allow easy access should disassembly be required.
Typical Fluid ApplicationsPotable water*
Potable water* system flushing
Chilled water with corrosion inhibitors
Hydronic heating
Rainwater/greywater
Fitting Socket Depths
Tube Size Socket Depth½” 15⁄16”
¾” 1 1⁄8”
1” 1 5⁄16”
1¼" 2 ¼"
1½" 2 7⁄16"
2" 2 ¾"
NO NO
NONO NO NO
NONO
NO NO
NONOFast & simpleEasy installationReduce installation time by 1/3Connect in under 8 seconds
CleanNo glues, fluxes or solder needed
no Consumable materialsReduces material cost and storage
b e n e f i t s t o t h e p u s h f i t s y s t e m
-G
Grip ring holds tubing securely in place
Gasket seals tubing
Tubing is inserted to depth of fitting, turned slightly and is secured
Unique ring design allows TecTITe fittings to be removed and reused
Protective ring
end cap ensures straight insertion
Other joining technologies from Elkhart Products
When you want to join CPVC, PEX, or Copper supply lines, it’s easy to make a permanent joint with QTITE™
fittings. Design flexibility allows you to join dissimilar pipe materials and sizes with just one fitting. QTITE
fittings push together in seconds to create the perfect permanent joint, reducing labor and material costs.
Available in ½", ¾" and 1" Nominal Sizes.
A superior seal with the cleanest connection available. We’re not exaggerating when we say that our
XPRESS™ press fittings provide a clean, efficient joining method that leaves others in the dust. No torch!
No long preparation procedures! No adhesives and fluxes! No complicated clamping! Available in both
Gunmetal and Copper from ½" to 4" Nominal Sizes.
When you need solder joint fittings for any plumbing system application, look to Elkhart Products.
We have engineered and manufactured a wide variety of pressure, drainage, and flared fittings to
stringent specifications for over 60 years.
Elkhart Products CorporationFor the perfect �t For more information visit our website at www.elkhartproducts.com
1255 Oak St. | Elkhart, Indiana 46514 | 574-264-3181
GuaranteedOur 50-year warranty ensures that your push-fit connection will stay
perfect. Designed and manufactured to last for years on installations
ranging in size from 1/2" to 2".0500TT-BR-082010