ONLINE AUCTION

Knife Grinders • Vertical Spindle Grinders • CNC MachineryMilling Machines • Vertical Band Saw • Heat Treat Furnaces

Misc. Support Equipment • Forklifts • Air Compressors

INSPECTION: By Appointment ONLY – Contact Andy Becker at 770-973-1372 or andybecker73@gmail.com

BID ONLINE: November 18 thru December 10, 2014 at 1:00pm EST

Andy BeckerAB & Associates, LLC

2169 Cedar Forks Drive Marietta, Georgia 30062Ph: 770-973-1372 Email: andybecker73@gmail.com

www.andy-becker.com

Triangle-T Corporation 351 Green Swamp RoadBrunswick, Georgia 31525

Major Industrial Knife ManufacturerDue to Complete Facility Closure:

Buyer’s Premium 18% Online

Place BidsOnline at

Andy Becker Georgia Auctioneer License No. AU004075

Andy Becker & Associates, LLC Phone: 770-973-1372 www.andy-becker.com

ONLINE AUCTION: November 18 thru December 10 at 1:00pm EST

KNIFE GRINDERSReform Model AR56 Type-11 Bevel Type Knife Grinder, S/N 3418-87, 244” Travel, (2) 18.5’ Magnetic Beds, 120 HP, Recirculating Coolant SystemReform Model AR60 Type 7 Surface Knife Grinder, S/N 6000 (1996), 6000mm (266.2”) Working Length, Recirculating Coolant SystemReform Model AR45 Type 71 Bevel Type Knife Grinder, S/N 6001 (1996), 4500mm (177”) Working Length, Mechanical ClampsMVM Model TU-4000 Knife Grinder, S/N N/A

VERTICAL SPINDLE GRINDERSMattison Model 400SS Surface Grinder, S/N 167, 30.5” x 96” Magnetic Bed, Vertical Spindle, 125 HP, Recirculating Coolant SystemMattison Model 400SS Surface Grinder, S/N 209, 28” x 104” Magnetic Bed, Vertical Spindle, 125 HP, Recirculating Coolant System (disassembled)Mattison Model 400SS Surface Grinder, S/N 221-6, 16” x 166” Magnetic Bed, Vertical Spindle, 125 HP, Recirculating Coolant System (disassembled)Grand Rapids Model A Surface Grinder, S/N 19144, 16” x 48” Magnetic Chuck

CNC MACHINERYMori Seiki Model MV65-50 CNC Dual Pallet Vertical Machining Center, S/N 365, 60” X-Axis, 25.6” Y-Axis, 25.6” Z-Axis, 6000 lb. Table Capacity, 30 Position Automatic Tool Changer, #50 Spindle Taper, 4000 RPM, with Dual 66.9” x 26” Pallets, Fanuc 11-M Control, with ToolingLeadwell /Ramco Model MCV-2000D CNC Vertical Machining Center, S/N 86806, 78.7” X-Axis, 23.6” Y-Axis, 36” Z-Axis, BT 50 Spindle Taper, 3000 RPM, 20 Position Automatic Tool Changer, 28” x 96” T-Slotted Table, Fanuc 10-MA ControlAmera Seiki Model DTM-40 CNC Drill & Tap Machine, S/N W970282 (1997), 12 Position Automatic Tool Changer, 20” X-Axis, 14” Y-Axis, 18” Z-Axis, 13” x 23” Table, with Mitsubishi CNC Control

Andy Becker & Associates, LLC Phone: 770-973-1372 www.andy-becker.com

COMPLETE FACILITY CLOSURE: Major Industrial Knife Manufacturer

MILLING MACHINES • VERTICAL BAND SAWCincinnati Model 650 Vercipower Vertical Milling Machine, S/N MSE567, 60 HP Motor, 20” x 104” T-Slotted Table, 50” Table Travel, 18” Saddle Cross Travel, 28” Vertical Head Travel, 50 HP MotorCincinnati Model 550 Vercipower Horizontal Milling Machine, S/N 311073H5V-1, 25” x 120” T-Slotted Table, with ToolingCincinnati Model 4 Vertical Milling Machine, S/N 4J4V1Y-26, Dial Type, 18” x 72” T-Slotted TableKasto Racine Model SSB 260 VA Vertical Band Saw, S/N 112-258-6510-78848, 10.28” x 10.28” Squares or Rounds Max. Cutting Width

HEAT TREAT FURNACESLindberg Direct Fired Natural Gas Box Furnace, S/N 19682, 24” x 48” x 24” Opening, 1025°F Operating Temperature, with Updated PLC Temperature Controls & Circulating Fan with DuctworkSunbeam Direct Fired Natural Gas Box Furnace, S/N N/A, 24” x 48” x 24” Opening, 1025°F Operating Temperature, with Updated PLC Temperature Controls & Circulating Fan with DuctworkHeavy Duty HD-244818-CU Electric Furnace, S/N 94808 • Lindberg 11-RO-304820-20 Electric Annealing Furnace, S/N 23336, 51 kw, 2000°F(2) Lindberg Natural Gas Direct Fired Box Furnaces, S/Ns 20010, 23217, 24” x 48” x 14” (est.) Opening, 2150°F, Custom Load/Unload HandlerThermal Basic Specially Designed Dual Heat Natural Gas Fired Hardening Furnace, S/N 496-4495 (est. 1995), 460,000 BTUs, 2000°F, 100” BedPillar Model MK11 Induction Heating System, S/N 6456, 10 kHz, 150 kw, with Power Supply, Chiller & Control Panel

MISC. SUPPORT EQUIPMENTP&G Model DH60 2-Hole Reach-in Blast Cabinet, S/N 442, 5’ x 4’ x 3’ Tall, with Shot Blast Recovery UnitDake Model 905150 150 Ton Hyd. Shop Press, S/N 204002, 48” Between Housings • MSC Model 9512922 Mill & Drill Machine, S/N 633422Newage Model AT130-RDE Hardness Tester, S/N 5467, Mounted on Steel Stand • Rockwell Model AccuPro Hardness Tester, S/N 0194Dake #6 Wheel Press • Uline Model H-959 Semi-Automatic Banding Machine, S/N 801122162 (2008) • Wall Colmonoy Model J-3 Spray WelderCustom Designed Knife Straightening Press, 12-Blade Capacity, Water Cooled Platens, 1000 PSI, Complete with Hydraulic Power UnitWilton Model 4400 12” Vertical Grinder, S/N 30127 • Besly Model 205 Double End Grinder, S/N 205-18-049Franz Kuhlmann K500 Drill Bit Sharpener, S/N 02002 • Crane Magnet, 10,000 lb. Cap. • Fairbanks 4’ x 4’ Floor Scale, 5000 lb. Cap., DROMfr. Unknown Specially Designed Oil Quench Tank, with 2-Axis Rotator & Control Panel • Bishamon Portable Lift • Ryobi Miter Saw(2) 1000 gal. (est.) Water Tanks • Shaw Box 3 Ton Pendant Controlled Cable Hoist, Mounted on Steel Monorail • (2) Abrasive Cut-off Saws

FORKLIFTS • AIR COMPRESSORSHyster Model S50XL LP Gas Lift Truck, S/N C187V11899S (1995), 4750 lb. Capacity, 189” Reach, 3-Stage Mast, Side ShiftPrime Mover Model SC-20 Electric Hi-Lift Walkie, S/N 207445, 2000 lb. Capacity, 106” LiftMfr. Unknown 2-Stage Air Compressor, 25 HP Motor, Air Cooled, Mounted on Horizontal Receiver TankKellogg Model 452TVX 2-Stage Air Compressor, S/N V19123052, 10 HP Motor, Air Cooled, Mounted on Horizontal Receiver Tank

All of the above is sold “as is – where is” to the highest bidder for cash in accordance with the auctioneers CustomaryTerms of Sale. All payments are required in cash, certified or cashier’s check, made payable to Andy Becker &Associates, LLC. Company or personal checks are accepted only if accompanied by your bank letter of creditguaranteeing your funds. Balance due at conclusion of sale. All sales are subject to state and/or local sales tax, unlessa signed exemption form is presented at the time of purchase. No assets can be removed while the sale is in progressor without full payment. BUYERS PREMIUM 18% Andy Becker Georgia Auctioneer License No. AU004075

Partial Auction Terms & Conditions

ONLINE BIDDING ONLYPlace Your Bids at

ON-LINE BIDS SUBJECT TO 18% BUYER’S PREMIUM

BID ONLINE: Nov. 18 thru Dec. 10 at 1:00pm ESTINSPECTION: By Appointment - Call Andy at 770-973-1372Triangle-T Corporation

ONLINE AUCTION

Andy BeckerAB & Associates, LLC

BID ONLINE ONLY: Nov. 18 thru Dec. 10 at 1:00pm EST

INSPECTION: By Appointment Only - Call Andy at 770-973-1372

ATTENTION: PLANT MANAGEROR MACHINERY BUYER

2169 Cedar Forks Drive Marietta, Georgia 30062

Industrial Knife Manufacturer

ONLINE AUCTIONTriangle-T Corporation 351 Green Swamp Road

Brunswick, Georgia 31525

Andy BeckerAB & Associates, LLC

2169 Cedar Forks Drive Marietta, Georgia 30062Ph: 770-973-1372 Email: andybecker73@gmail.com

www.andy-becker.com

Directions to Auction• I-95 to Exit 42, GA99• Turn Right onto Hwy 99• Follow 6 Miles, Turn Right on US25/US 341

• Turn Right onto Green Swamp Road