Maharaja GS-100 Garment Steamer - Instruction Manual - Page 06
description
Transcript of Maharaja GS-100 Garment Steamer - Instruction Manual - Page 06
.During operation, the steamer hose maymake a gurgling noise.This is a normal resultoI condensation. lf lt begins to gurgle, extendhose up and out to allow any excessmoisture back into the base.
Before using any of the accessories onupholstery or garments, be sure to consult themanufacturer regarding their recommendations.We also recommend testing on aninconspicuous area.
U pholstery brushxThe upholstery brush is used to aid steampenetration into difficult, heaw fabrics,Ior fasterresults.
. Attach the upholstery brush to the steam headby lining up the bottom of the brush with thebottom ofthe steam head. Gently push the topofthe brush into place on the steam head untilit clicks into place - fig.7.
. Gently brush the area to be steamed with thegrain or nap of the fabric.
. Femove the upholstery brush once the unit isunplugged and completeJy cool, Remove it bypressing on the tab on top of brush whilepulling it forward.
Fabric brush*The fabric brush opens the weave of the fabrics,or better steam penetrati6n.
. Attach the fabric brush to the steam head bylining up the bottom of the brush with thebottom of the steam head. Gently push the topoI the brush into place on the steam head untilit clicks into place,
. Gently brush the area to be steamed with thegrain or nap of the fabric.
. Remove the fabric brush once unit isunplugged and iompletely cool. Remove it bypressing on the release tab on top of brushwhile pulling it forward.
Crease attachment*The crease attachment allows you to maketrouser creases easily and remove stubborncreases.
. Fasten the crease attachment io the steamhead by inserting it into the slide under thesteam brush -fig.8.
. Gently push into place.
. Push on the handle to open out the creaseattachment - fig.9.
.Put your fabric in the space between thecrease attachment and the steam brush -fis.10.
. Release the handle.
. Move the crease attachment in a downwardsmotion staning from the top - fig.11.
. Once unit is unplugged and completely cool,remove the crease attachment by sliding it outof the steam brush.
Lint padxThe lint pad removes hair, lint and animal furfo. a professional finish.
. To use the lint pad, slowly brush the clothingwith ihe grain or nap of the fabric.
.The pad can be cleaned by brushing it in theopposite direction. We recommend cleaningthe pad onto an old cloth that can bediscarded.
*depending on moclel: those accessoties arc eithet equipment specific to cenain models ot avaitabte as anoptional accessory-
Accessories (depending on modet)' Reminder: When using accessories steam lonly in an up and down vertical motion.Never use the steam head in a horizontalposition and never sieam with thesteamhead ups;de down.
the base of your garment steamer onthe lloor. Ensure the floor is a tlat, stable,heat-resistant surface. Never carry or lift thisproduct over tloor heiqht while in use.
Do not allow steamer to run dry.
Be sure unit is unplugged andcool before attaching accessories.
Be sure unit is unplugged and completelycool before attaching accessories.
'ethe unitcool before attaching acressories-