Tack Trunk Woodworking Plan - Kyserike Kraftsman Woodworking
Magswitch Woodworking Line - · PDF fileMagswitch Woodworking Line Sales Enquiries: Tel ......
Transcript of Magswitch Woodworking Line - · PDF fileMagswitch Woodworking Line Sales Enquiries: Tel ......
Magswitch Woodworking Line
Sales Enquiries:Tel: (303) 468-0662Fax: (303) 951-9912Email: [email protected]
Magswitch 2011 Product Offering
For 2011, Magswitch has some exciting new products and changes. We have enhanced our product offering around our Universal Base with 4 great new accessories for the base. We promote these individual tool attachments around the Universal Base as part of the “Magswitch Workholding System”. We strongly believe woodworkers will want to add many of these accessories once they buy the base.
The “Magswitch Workholding System” is a collection of clever and handy tools that combine the versatility of our “anywhere on the table, fast set up, strong, on off magnetic clamps” with tools that can hold, position or guide wood on all cast iron tables and fences. The value is drive by the flexibility of the tools for all tables, and the speed at which woodworkers can set up.
Magswitch 2011 Product Offering
For the “Magswitch Workholding System”, We added the following new attachments to be used with the Universal Base: 1. Reversible Featherboard, (that accepts our Vertical Featherboard Attachment), 2. The Ultimate Thin Stock Jig/Rip Guide – three tools in one, 3. Universal Track Walls Two sku’s 18” and 36”4. We will offer a starter kit sku as well, that features the Base, Jigs and Reversible
Featherboard. At a substantial introductory offer.
Also look for our new Automatic on Cabinet Latch with 25 lb of hold. This amazing new latch engages itself when it comes in contact with the striker plate. You simply turn the knob 180 degrees counter clockwise to release.
These products will be available to ship from Denver in the first week of October.
Magswitch Workholding System
One Universal Base + Two MagJigs= Hundreds Of Possibilities!
Easy And Quick Setups On Every Cast Iron Or Steel Top Tool In Your Shop
Fast And Precise Positioning With Powerful Magnets That Turn ON And OFF
Replaces Hundreds Of Dollars Worth Of Fences, Jigs And Devices That Are Usable On Only One Tool Each
Most Accessories Work On Cast Iron Fences For Hold Down Too!
Each Accessory Has Numerous Uses On Almost Every Tool You Own
Easy Conversion From One Tool To Another, Or Purchase Additional Bases And MagJigs To Use Multiple Tools At The Same Time
Exceptional Holding Power With Your Choice Of MagJig 95’s Or The More Powerful 150’s
Accepts Both Sizes Of MagJigs With The Included Adapters
Seven Tools Currently Available, Additional Tools To Follow
Part Number:Product Description:
8110134 Magswitch Workholding System Starter Kit
Woodworking - Product Specification
Features & Benefits:Perfect for the first time Magswitch System
Buyer. Complete with Universal Base, two
MagJig 150’s and the Reversible
Featherboard. Includes all items necessary to
enter the system. Accepts all Magswitch
Workholding System Accessories.
Reversible to work on either side of the blade.
Small footprint to work on Bandsaws, Fences
and small tables. Accepts the Vertical
Featherboard Attachment with Risers (sold
separately).
Parts Included:One Universal Base. Two MagJig 150’s.
One Reversible Featherboard. 2 MagJig 95
Adapters. 4 short mounting screws for
MagJigs. 4 longer mounting screws to attach
FB. 2 plastic washers for stacking when used
with the Vertical Attachment. 1 wrench
Pricing:
Suggested Retail: $ 69.00
(Shown with Vertical Featherboard Attachment with Risers– sold separately)
The Starter Kit is the practical way to get
started in the Magswitch
Workholding System!
Our Ultimate Birthday,
Christmas or Father’s Day
Gift.
Part Number:Product Description:
8110112
Magswitch Workholding System Universal Base
Woodworking - Product Specification
Features & Benefits:
Accepts both MagJig 95 and 150’s
w/included adapters. For use with each
attachment for all your shop needs.. Low
Profile to easily fit on Cast Iron Fences &
smaller machine tables. Can be used alone
as a fence or straight edge such as on a
Bandsaw, Drill Press, Oscillating Spindle
Sander, or Disc Sander. Contains Brass
Inserts for durability and long life.
Parts Included:1-Universal Base,1 ea Left & Right adapters
for MagJig 95, 4-screws and 1-wrench
Pricing:
Suggested Retail: $ 18.99
(Shown w/Optional attachments & MagJigs – sold separately)
Part Number:Product Description:
8110005MagJig 150
Woodworking - Product Specification
Features & Benefits:
Instant on/off Magnetic Clamp. For use
with the Magswitch Workholding
System or on your homemade jigs. Up
to 150 lbs of hold down force for
securing custom made jigs and fixtures.
Precise positioning. Fast set ups.
Exceptional strength. Drill as many
holes as you need in your jig or fixture,
add more MagJigs for the holding force
you require. Install two or more to
prevent pivoting action. Exceptional
shear force to resist sliding.
Requires 40m hole to be drilled in 3/4
inch thick material for installation. Has
two #8 size holes in top for securing the
MagJig to the fixture (not required
though)
Parts Included:1-MagJig 150
Pricing:
Suggested Retail: $ 29.99(Customer Designed Jigs)Shown with Workholding System
Part Number:Product Description:
8110004MagJig 95
Woodworking - Product Specification
Features & Benefits:
Instant on/off Magnetic Clamp. For use
with the Magswitch Workholding
System or on your homemade jigs. Up
to 95 lbs of hold down force for securing
custom made jigs and fixtures. Precise
positioning. Fast Positioning.
Exceptional strength-up to. Drill as
many holes as you need in your jig
fixture & add more MagJigs for the
holding force you require. Install two or
more to prevent pivoting. Exceptional
shear force to resist sliding Requires
30mm hole to be drilled in 3/4 inch thick
material for installation. Has two #8 size
holes in top for securing the MagJig to
the fixture (not required though)
Parts Included:1-MagJig 95
Pricing:
Suggested Retail: $ 19.99
(Customer designed jigs shown)Shown with Workholding System
Part Number:Product Description:
8110125
Magswitch Workholding System Resaw Guide
Woodworking - Product Specification
Features & Benefits:
Firm Ball Bearing support for passing wood through a
blade with less effort & damage. Angled in/out feed to
allow for blade drift adjustment. Ball Bearings can be
removed & repositioned for extra support in one location,
or when working with smaller stock. Provides a
measured & consistent gap for use when passing wood
into a Spindle Sander. Reduce Burning and increase
sanding quality. Helps reduce kickback by providing firm
support and control of the work piece. To be used in
conjunction with all safety devices as provided by the
machine manufacturer. Fits on Universal Base (sold
separately). Ideal for resawing on Band Saws, as well as
out feed on many woodworking machines. Low Profile to
easily fit on to Cast Iron Fences and smaller machine
tables. Can be used by itself as a fence or straight edge
such as on a Band saw, Drill Press, Oscillating Spindle
Sander, or Disc Sander
Parts Included:1-Resaw Guide, 2-support bracket mounting screws
(installed), 4 knobs, 4 mounting screws, 2 adjustment
shims, 2 thumb screws, 2 carriage bolts, 1-wrench
Pricing:
Suggested Retail: $ 22.99(Shown w/Universal Mounting Base & MagJigs – sold separately)
Part Number:
Product Description:8110130Magswitch Workholding System Dual Roller Guide
Woodworking - Product Specification
Features & Benefits:
Firm Ball Bearing support for passing wood
through a blade w/less effort & damage. Dual sets
of ball bearings for extra firm support & control of
tall panels. Ball Bearings can be removed &
repositioned for extra support in one location, or
when working with smaller stock. Helps reduce
kickback by providing firm support and control of
the work piece. To be used in conjunction with all
safety devices as provided by the machine
manufacturer. Fits onto Universal Base (sold
separately). Ideal for resawing on Band Saws,
Raised Panels on Table saws, as a second hand
to control long/large/tall pieces. Low Profile to
easily fit on to Cast Iron Fences & smaller
machine tables. Can be used by itself as a fence
or straight edge such as on a Band saw, Drill
Press, Oscillating Spindle Sander, or Disc Sander
Parts Included:1-Dual Roller Guide, 2-support bracket mounting
screws (installed), 4 knobs, 4 mounting screws, 2
adjustment shims, 2 thumb screws, 2 carriage
bolts, 1-wrench
Pricing:
Suggested Retail: $ 24.99(Shown w/Universal Mounting Base & MagJigs – sold separately)
Part Number:Product Description:
8110131 Magswitch Workholding System Reversible Featherboard
Woodworking - Product Specification
Features & Benefits:Designed for use with and attachment to
the Universal Base and MagJigs (sold
separately) Reversible Featherboard
works on either right or left side of the
blade. Perfect for small tables,
Bandsaws, Shapers Tablesaws etc…
Accepts the Vertical Featherboard
Attachment with Risers (sold separately)
to become three tools in one! Converts
to dual action Featherboard, or
Adjustable Stackable Featherboard. Also
fits on to the Universal Track for custom
hold downs (sold separately)
Parts Included:1-Reversible Featherboard, 2 mounting
screws, 1-wrench
Pricing:
Suggested Retail: $ 14.99
(Shown w/Universal Mounting Base & MagJigs – sold separately)
(Shown w/Vertical Attachment With Risers—sold separately)
Part Number:Product Description:
8110178
Vertical Featherboard Attachment w/Risers
Woodworking - Product Specification
Features & Benefits:
For use with the Magswitch Workholding
System Reversible Featherboard and the
Pro Table Featherboard, each sold
separately. Offers safety against kickbacks
in both vertical and horizontal positions.
Versatile-Allows for vertical use and
horizontal stacking. Includes all hardware to
create vertical hold down, single or double
stackable Featherboard. Add additional kits
and use your own carriage bolts to create
taller or custom stacks
Parts Included:1-Vertical Featherboard Attachment
4 riser blocks (to create single or double tall
stack), 2-90 degree support brackets,
4 knobs, 8 carriage bolts, 4 nylon spacers
Pricing:
Suggested Retail: $ 16.99Shown with 1. Pro Table Featherboard
2. Reversible Featherboard and Universal Base with MagJigs
Part Number:Product Description:
8110362 Magswitch Workholding System Ultimate Thin Stock Jig/Rip Guide
Woodworking - Product Specification
Features & Benefits:Like nothing else in the industry today!
Three tools in one! Stepped side safely
holds 1/8”, 1/4” and 3/8” stock down near
the blade. Sloped side holds all
thicknesses from 1/16 to 3/4" freeing your
hands and saving your fingers. Adjustable
Ball Bearing -Thin Rip Guide in the center
retracts out of the way, or extends for
accurate repetitive ripping of your stock.
Designed for attachment to and use with
the Universal Base and MagJigs (sold
separately).
Parts Included:1-Ultimate Thin Stock Jig/Rip Guide,
2-Screws, 1-Wrench
Pricing:
Suggested Retail: $ 19.99
(Shown w/Universal Mounting Base & MagJigs – sold separately)
Part Number:Product Description:
8110132 = 18” , 8110370 = 36”
Magswitch Workholding System Universal Track
Woodworking - Product Specification
Features & Benefits:Bring your T-Track accessories and jigs out of the miter slots! Designed fro use with the Magswitch Universal Base and MagJigs (sold separately). Make your own Jigs, Fixtures, Stops, Fences, Zero Clearance Fences and more! Mounts to miter gauges fences too! Accepts all standard mounting hardware! One side accepts all standard t-bolts and all ¼” hex. The other side accepts Kreg’s clamps, all standard t-bolts and all 5/16” hex.. Joiner bars and 90 degree brackets are coming soon to join these track segments to create longer fences as well as 90 degree angles for box work and measuring. Join Universal Tracks together to form solid straight edges and saw guides. Add clamps to the underside slots to ensure no obstacles when sawing or marking.
Parts Included:1-18” universal Track, 2-90 degree support brackets, 4-1/4” bolts, 2-5/16” bolts, 2-adjustment shims, 4-knobs 2-Mounting Screws, 1-Wrench
Pricing:
Suggested Retail: 18” = $ 29.99 ; 36” = $58.99
Part Number:Product Description:
8110015Universal Featherboard
Woodworking - Product Specification
Features & Benefits:
Fast set up, strong hold, precise
positioning. Double Sided for use
on either side of the blade
Low Profile to work on Steel and
Cast Iron fences
Compact Footprint to work on
small and large tables
Features 2-20mm Magswitches
(each with 95 lb of hold force) for
secure hold
Magswitches are titanium coated
for greater hold in shear.
Parts Included:1 Universal Featherboard
Pricing:
Suggested Retail: $ 39.99
Part Number:Product Description:
8110328Pro Table Featherboard
Woodworking - Product Specification
Features & Benefits:
WOOD Magazine tool of the year -
2007. Fast Set up - makes using a
Featherboard easy. Instant on off.
Super strong – Precise positioning.
Not limited to Miter slot.
2 Powerful 30mm Magswitches
(each with 150lbs of hold force) for
extra secure holding power
Includes slots to accept the Vertical
Featherboard Attachment
(sold separately)
Converts to Adjustable Stackable
Featherboard with the Vertical
Featherboard Attachment
(sold Separately)
Parts Included:1-30mm Pro Table Featherboard
Pricing:
Suggested Retail: $ 49.99(Shown w/Vertical Featherboard Attachment)
Part Number:Product Description:
8110178
Vertical Featherboard Attachment w/Risers
Woodworking - Product Specification
Features & Benefits:
For use with Pro Table Featherboard and
the Magswitch Workholding System
Reversible Featherboard, each sold
separately. Offers safety against kickbacks
in both vertical and horizontal positions.
Versatile-Allows for vertical use and
horizontal stacking. Includes all hardware to
create vertical hold down, single or double
stackable Featherboard. Add additional kits
and use your own carriage bolts to create
taller or custom stacks
Parts Included:1-Vertical Featherboard Attachment
4 riser blocks (to create single or double tall
stack), 2-90 degree support brackets,
4 knobs, 8 carriage bolts, 4 nylon spacers
Pricing:
Suggested Retail: $ 16.99Shown with 1. Pro Table Featherboard
2. Reversible Featherboard and Universal Base with MagJigs
Part Number:Product Description:
8110155Risers for Vertical Featherboard Attachment
Woodworking - Product Specification
Features & Benefits:
For use with Vertical Featherboard
Attachment (sold separately).
Includes 4 riser blocks and all
hardware to create single or double
stackable Featherboard. Add
additional risers and vertical
attachments with your own carriage
bolts to create taller and custom
stacks.
Parts Included:
4 riser blocks (to create single or
double tall stack), 2 knobs, 4
carriage bolts, 2 nylon spacers
Pricing:
Suggested Retail: $ 8.99(Shown with Pro Table Featherboard).
(Shown with longer bolts & extra Vertical Attachment)
Part Number:Product Description:
8110329Pro Fence Featherboard
Woodworking - Product Specification
Features & Benefits:
Super strong grip. Easy on & off.
Fast set up. Precise Positioning.
Not dependent on Miter Slot.
Includes 2-30mm Magswitches
(each with150 lbs of hold force) for
extra secure hold. Low Profile for
use on Steel and Cast Iron Fences.
Also ideal for use on the right hand
side of a blade. Used on Band
Saws, Table Saws, Joiner Planers,
Shapers and more
Parts Included:1-Pro Fence Featherboard
Pricing:
Suggested Retail: $ 49.99
Part Number:Product Description:
8110054MagSquare 150
Woodworking - Product Specification
Features & Benefits:
Up to 150 lbs of hold down force for
securing custom made jigs and fixtures.
Locking lid for greater security, push
down & turn counterclockwise to turn
off. Exceptional shear force for resisting
sliding sideways. Includes M5 holes on
all four sides for mounting to fixtures, or
attaching jigs, fences etc… Precision
machined to 90 degrees on all sides for
use when assembling drawers, frames
etc… Also use as a stop for repetitive
cuts.
Parts Included:1-MagSquare 150
Pricing:
Suggested Retail: $ 39.99
Part Number:Product Description:
8110043
25 lb. Automatic-On Cabinet Latch
Woodworking - Product Specification
Features & Benefits:
Magnetic latch engages itself when in comes in
contact with striker plate, and hold with 25 lbs of
force. You simple turn 180 degrees counter
clockwise to release the magnet. When you let
go, the magnet is ready to self engage again.
Available in 8/32 Thread. Accepts any standard
knob (not included). Specially designed to hold
glass panel doors closed & allow them to open
without shaking. Installs in any 3/4" thick door, stile
or rail. Requires drill press or equivalent to install.
For use in any custom woodworking project.
Includes Three reversible striker plates for
installation in most any situation. Perfect for custom
boxes, chests, lids and doors, etc…
Parts Included:1-8/32 cabinet latch, 3-reversible striker plates, 4-
mounting screws, 2-thick spacers for use with both
striker plates, 2-Thin washers for use with ‘T’
shaped striker plate
Pricing:
Suggested Retail: $ 9.99
Part Number:Product Description:
8110082 = M4 ; or 8110007 = 8/3212 lb. Cabinet Latch
Woodworking - Product Specification
Features & Benefits:
Manual on/off Magnetic Cabinet Latch.
Available in M4 or 8/32 Thread. Accepts any
knob of your choice (not included). Specially
designed to hold glass panel doors closed &
allow them to open without shaking. Installs
in any 3/4" thick door stile or rail. Requires
drill press or equivalent to install. For use in
any custom woodworking project. Includes
two reversible striker plates for installation in
most any situation.
Parts Included:M4 or 8/32 cabinet latch, 2-reversible striker
plates, 4-mounting screws, 2-thick spacers
for use with both striker plates, 2-Thin
washers for use with ‘T’ shaped striker plate
Pricing:
Suggested Retail: $ 7.99
Industry Reviews
Family Handyman Magazine, Dec/Jan 2010
‘The theory is so simple, but the practicality is awesome. You can position your featherboard virtually anywhere and lock it down quickly and easily. ‘‘The Magswitch featherboards offer safety and convenience in a single package. Plus there is no learning curve and no technical assembly.’
‘Perhaps best of all … when not in use they attach very securely to any metal cabinet, contractors table saw, router table cabinet, or even a bandsaw cabinet.’
‘I use featherboards regularly, they are invaluable to me, and having magnetic versions such as these make them all the more easier to use.’Dean Bielanowski Online tool review .com.
“This is amazing technology that is sure to
increase safety on your tablesaw, bandsaw,
shaper and other machines”
H. Varju, Canadian Home Woodworking Winter 2009.
‘Before trying this product, I was concerned about its magnets being sufficiently strong …not a problem. Those magnets hold onto a cast iron table as though they were locked in place. This feather board stays put as the wood piece slides by.’
‘This product is made tough, for frequent use in a workshop. Simple design, effectively executed, in a quality product. ‘
‘For decades I've been using the type of feather boards that tighten in the 3/4" wide table slot. Their fatal flaw is, if the piece to be cut is too wide to leave room to mount that feather board in the slot, it can't be used. That's not an issue with this product, as all it needs is a few inches of flat cast iron (or steel) to stick. Plus it works on either side of the blade. Setting it in place takes about two seconds.’Victor Agresti “Remodeling-guy“, Gaithersburg, MD United States
Industry Reviews
Fine Woodworking December 2009
WOOD MagazineTop Shop Tip
May 2009
British Woodworking December 2009
What our customers say about…
SAFETY
‘Although it is a wide unit, my saws andjointer can take it just fine. TheMagnetic hold is powerful and quicklyadjustable. Our main focus in the shopis safety first (there are four of us) andwe all like the ease and strength of theproduct!’‘Swede’, from Floyd, VA 1/27/2008
‘Another top-notch item fromMagswitch. Really improvessafety on a table saw, jointer
andbandsaw. Great design’R. Hempe, Narragansett, RI
“This is a truly amazing addition to theworkshop. Not only does it assist with thesafety aspects, it assists with accuratecutting….A Big advantage is that it can be setup very easily and quickly. The Magswitchmeets my 5-star rating’“Grumpy”, a blogger on LumberJocks Website
‘It performs just like I thought. I feel alot safer in my shop knowing myhelper will have no reason to get hishands anywhere close to any blades orcutters. I will order another one soon.Handier than a shirt pocket!’G. Levander, Bismarck, ND 7/12/2009
and ….FUNCTIONALITY
‘Once you've used this you will wonderhow you got along without it! Its Soooo
simple to attach and it's amazinglystrong. Works better than I had hoped
for. Along with the vertical attachment it makes all power tool operations far safer. One of the best shopaids I've ever bought.’
S. Karshna, Park Falls, WI 4/30/2009
‘I would buy this againand recommend it. 5
stars.’Ron, Smithville, NJ
‘I am very impressed. It is far easierto set up, and as it attaches to the
table via magnets it accommodatesmuch wider stock than my miter
gage slot feather board.’John, Barnhart, MO 2/25/2009
‘Easy and quick set up, very
handy to use.’L. Kinney, Port Byron, IL
11/7/2009
Magswitch Mag-Jig 30mm:‘ Used this to fabricate a blade guard
that can be easily attached to sawtable top. I saw this on Charles Neilwoodworking site. It works! Bottom
line yes, I would recommend this to afriend’
"Very useful tool and it can be set up inseconds because of the magnets. I
always use this now for the saw bench,whenever possible."
Mr. David Jackson, CO, 2010
‘I just received this yesterday and I put iton my jointer, wow what a difference. Itis almost amazing as to how this works, I
love it and I will probably buy anotherone for my table saw.’
Shawn, Greencastle, PA 2/21/2007
‘Love this Featherboard on my cabinetsaw (lots of room to mount it). I bought
the vertical attachment as well and usingboth together is really nice. I stick it to
the side of the saw when not in use so it'salways handy. ‘
Mike, Fort Collins, CO 12/31/2007
MAGSWITCH
…IN USE
Magswitch Mag-Jig 30mm: ‘4 stars’
‘These little magnets are great for making custom jigs
to clamp down to the cast iron tabletops on table saws,
band saws, drill presses, etc. They are magnificently
strong magnets and won't easily move once turned on.
The really great thing is that you don't need to
permanently attach them to your jig- a precise hole is
enough. This allows you to create bunches of jigs and
just move the magnets from one to another. ’
Seth Welty, New Orleans, 2010
‘I have the Pro version (30mm) and it is one of my favorite
accessories and the first featherboard I reach for when
Ripping anything. The holding power, the convenience, and even the on the-fly adjustment makes it a
truly wondrous tool.
If you have a cast iron topped table saw, this is such a great
accessory I couldn't recommend more fervently. With the
Vertical hold down attachment, it becomes even more useful. With the new double-stack attachment it works for tall stock or if you're beveling panels.
Robert, Madison, WI 4/6/2009
‘I was so impressed at Magswitch's performance on mytable saw that it swayed me to get the Bench Dog ironrouter table. Yes, you can get it to slide if you really try,but I have put it on top of sawdust and it still held undernormal use. I have put the magnets on top of the miter
groove where I thought it would slip, and it held. It workson rips that are too wide for my old featherboard to
work. I also have made great use of it as a magnet to pickup screws and nails that I have spilled..So easy to use.’
Tim Weis, Athens, TN , 11/10/2009
‘Extremely versatile. I've already found so manyuses for them in my shop. I use them for smallfences on the drill press and band saw, to hold
down bench top tools on the table saw or on any other metal-top table. They're really easy to use. Totally recommend
them to any woodworker.’K Ryan, TN, June 2009
‘ It is also a good value kit – if you take the $200 price tag, and then realize that the
two MagJigs that it comes with are worth $100 on their own ($50 each). And these MagJigs can be used anywhere – switch them from task to task (and jig to jig) as
needed.J. Villemaire, October 30, 2009
Using the Featherboards as wood holding pieces
‘Once I cut out the first side, and shaped it, it became the template for the rest of the sides. After using a combination of the table saw and the band saw to produce the initial shape, I then held it in place using some of the Magswitch featherboards so I could hit it with the drill-mounted Blowfly to smooth the curves out.
Stu’s Shed, Posted 11/6/09
The MagWall‘Didn’t get all my jigs in the
photo but this is my MagWall (or more precisely, MagDoor),where I store the various
MagProducts until needed. Stu’s Shed 10/29/09
IN THE WORKSHOP