Magnifiers - matedex.be · part of our business and we hold the ISO 14001 environmental approval....

Enlighten peoplewith the right light

MagnifiersLUXO (UK) Ltd

Connect House, 21 Willow Lane

Mitcham, Surrey, CR4 4NA

telephone: 00 44 (0) 20 8274 3500

Facsimile: 00 44 (0) 20 8274 3501

E-mail: [email protected]

Internet: www.luxo.co.uk

MAgNIFyINg LUMINAIRES – ENHANCE yOUR vISION. 2007.

Warranty:Mechanical components of LUXO products are warranted to provide the original owner 5 (five) years of free service from defects in material and workmanship. the warranty does not cover light-sources or transformers/ballasts, except in special circumstances with project lighting where ballasts may be eligible for the same warranty.

Conditions: 1. this condition will be granted only when the original invoice or sales receipt is presented together with the product. LUXO reserves the right to refuse free-of-charge warranty service if the above documentation cannot be presented or if the information contained is incomplete or illegible.

2. this warranty will not apply if the type sign or lot-number on the product has been altered, removed or made illegible. 3. this warranty does not cover alterations, adaptations or adjustments made to the product to conform to the national or local technical/safety standards in force in any country other than the ones for which the product was originally designed and manufactured.

4. Lights for service under warranty must be returned to the location instructed by your LUXO sales company or the authorized LUXO dealer where the product was purchased, where they will be replaced or repaired free of charge.

5. this warranty does not cover the following: Periodic maintenance and repair or replacement of parts due to normal wear and tear. Any adaptation or change to upgrade the product from its normal purpose without the written consensus of LUXO. Abuse or misuse of the product. Repair done by non-authorized service stations, dealers or the customer himself. Accidents, lightning, water, fire, improper ventilation or any cause beyond the control of LUXO. defects of the system into which the product is incorporated.

6. this warranty does not affect the customer’s statutory rights under applicable national laws in force, or the customer’s rights against the dealer arising from their sales/purchase contract.

A HIStORy OF qUALIty

Our history of lighting for the individual begins with our development of the L-1 task

light luminaire in 1937. The freedom of movement and the ability to place the light exactly

where it was needed changed the way task lights worked forever.

Luxo is committed to quality. Our products are made in our own factories in Scandinavia

and North-America. We specify, design and build our own products and control every step

of the process. Quality is not left to suppliers in another continent to define.

Our factories are ISO 13485 approved as a producer of medical equipment. Our

production system is ISO 9001 approved. Environmental considerations are an integrated

part of our business and we hold the ISO 14001 environmental approval.

All our medical products are approved according to IEC 60601-1 medical safety. They

are tested for electromagnetic interference and are approved according to IEC 60601-1-

2 electromagnetic compatibility. All our examination luminaries, diagnostic luminaires and

minor operating luminaries are approved according to EN 60601-2-41, safety of surgical

luminaires and luminaires for diagnosis. All products carry the medical CE mark.

Enlightening peoplewith the right light

The imporTance of lighTing

Light influences people. Good lighting solutions help create comfortable, flexible and

stimulating working environments. Not to mention the critical importance of the right

lighting for medical examinations and procedures.

At Luxo, we are committed to supply The Right Light.

Providing the right light takes a thorough understanding of the situation in question,

a solid knowledge of the importance of light on human well being as well as skills in

designing and manufacturing the best carriers of light.

Our range of illuminated magnifiers represents a specialized group of products, yet

their versatility and practical features have made them industry standard world-wide.

The unique flexibility of the arm and head allows for precise positioning. High quality

optics combined with efficient light sources and reflectors have made our magnifiers the

preferred tools for a wide range of applications. Their quality is recognized by users ranging

from consumers to doctors.

�

8330-8331 CircusDEsiGN: ALEksANDEr bOGENHOv / FOrmEL iNDusTriDEsiGN

circus is eminently suitable for demanding work in beauty parlours, clinics and laboratories or for people with impaired vision. circus has a large ø�65mm lens and patented spring balanced arm and highly flexible neck joint which can be positioned horizontally, vertically and laterally.

�

3301000

115

270

Technical informaTion 8330-833� circus

arTicle number primary lens colour lighT source WaTTage sockeT arm lengTh kg

8330-122-1 3.5D White/blue FsCH 1x22 2Gx13 1000 3.6

8330-122-2 3.5D White/Grey FsCH 1x22 2Gx13 1000 3.6

8330-122-3 3.5D Grey/Grey FsCH 1x22 2Gx13 1000 3.6

8331-122-1 5D White/blue FsCH 1x22 2Gx13 1000 3.8

8331-122-2 5D White/Grey FsCH 1x22 2Gx13 1000 3.8

8331-122-3 5D Grey/Grey FsCH 1x22 2Gx13 1000 3.8

arTicle number accessories

06-969-016-00 replacement lamp

8970-001 Attachment lens CirCus 4D

8970-002 Attachment lens CirCus 6D

8990-011-1 C-bracket. surface mounted table bracket

8990-014-0 TE-bracket. Table bushing

8990-028-1 Trolley in white

DiopTers ToTal magnificaTion focal luX aT lens size (mm)primary aTTachmenT ToTal X % lengTh focal primary aTTachmenTlens lens (mm) lengTh lens lens

3,5 3,5 1,88 188% 286 3 500 ø165

3,5 4 7,5 2,88 288% 133 8 650 ø165 ø49

3,5 6 9,5 3,38 338% 105 8 720 ø165 ø49

5 5 2,25 225% 200 3 500 ø165

5 4 9 3,25 325% 111 8 850 ø165 ø49

5 6 11 3,75 375% 91 8 420 ø165 ø49

circus is the most advanced illuminated magnifier ever

designed. it utilizes the latest lamp technology using a high

intensity ��W circular T5 tube with very good colour

rendering capacity. The tube is operated by high frequency

ballast there by eliminating flicker and prolonging lamp life.

circus has a ”free floating” lens of ø�65mm giving a large field

of view with a very narrow frame around it. The substantial

lens permits comfortable viewing with both eyes.

a circular light source is the ideal way of illuminating an

object, virtually eliminating shadows.

carefully calculated reflector optics gives a very high light

intensity at focal distance.

The fully covered spring balanced arm makes it easy to

position the luminaire in the correct position and makes

cleaning easy. a hinged lens cover is standard. it protects the

lens from dust and prevents the lens from causing damage if

left in direct sunlight. � swing away attachment lenses of 4 and

6 dioptre are available. additional lenses swing out from lens

cover when needed. The clean design fits any interior.

3

8312 magnifique iiDEsiGN: suzANNE sCHurCH

magnifique is for commercial or domestic use and is ideally suited to people with impaired vision. a very thin, translucent lens frame ensures that eye contact with the object viewed is not lost in transition when switching from magnification to normal viewing and back again.

4

2251040

Technical informaTion 83�� magnifique ii


8312-111-23 3D White FsD-11-E 1x11 2G7 1040 2.5

8312-111-235 3.5D White FsD-11-E 1x11 2G7 1040 2.9

8312-111-24 4D White FsD-11-E 1x11 2G7 1040 2.6

8312-111-26 6D White FsD-11-E 1x11 2G7 1040 2.8



8970-003 replacement main lens 3D acrylic.

8970-004 replacement main lens 4D acrylic

8970-005 replacement main lens 6D acrylic

8970-006 replacement main lens 3.5D crown glass

8990-011-1 C-bracket. surface mounted table bracket.


8990-028-1 Floor stand/trolley in white

8970-017 replacement suncover


3 - 1,75 175% 333 2465 175x108

3,5 - 1,88 188% 286 3200 175x108

4 - 2,00 200% 250 4220 175x108

6 - 2,50 250% 167 6730 175x108

magnifique ii has a large rectangular lens, �75 x �08 mm,

which permits comfortable viewing with both eyes. The lens

frame is very thin and made of translucent polycarbonate. The

carefully designed optics project a high level of light onto the

object viewed through the lens. The built in electronic ballast

further improves viewing comfort. it offers instant start and

no flickering or stroboscopic effects. magnifique ii comes with

a choice of 4 main lenses, 3D, 4D and 6D acrylic lenses as well

as a 3.5D glass lens for maximum scratch resistance.

The lens has a unique snap on, snap off feature and may easily

be changed to suit. The power switch has been designed to

give good tactile feedback, making it easy to find and operate.

5

8315 Wave PlusDEsiGN: LuxO As / D sPrANGEr

WaVe plus is the ideal magnifier for industrial applications. it is the only magnifier to offer both shadow free magnification with light coming from both sides, as well as three dimensional magnifi-cation with light coming from the left or right. The 3D feature is especially welcome when work-ing with circuit boards or similar delicate objects.

6

240

285

700 / 1040

Technical informaTion 83�5 WaVe plus

approVals:

• ENEC


8315-27-2 3.5D White FsD 2x7 G23 1040 3.9

8315-27-2G 3.5D Gray FsD 2x7 G23 1040 3.9

8315-27-2b 3.5D black FsD 2x7 G23 1040 3.9



06-800-140-00 Attachment lens WAvE plus 4D

06-800-130-00 Attachment lens WAvE plus 8D

06-800-120-00 Attachment lens, swing away 10D





3,5 3,5 1,88 188% 286 1 420 175x108

3,5 4 7,5 2,88 288% 133 3 790 175x108 ø95

3,5 8 11,5 3,88 388% 87 4 320 175x108 ø74

3,5 10 13,5 4,38 438% 74 4 180 175x108 ø35

by illuminating from one side only, depth perception is

increased and positioning of objects is made easier. The large

rectangular lens, �75 x �08 mm, permits comfortable viewing

with both eyes. The slim edge in front of the lens ensures that

eye contact with the object viewed is not lost when switching

from magnification to normal viewing and back again. The

neck joint between the head and arm moves in three planes:

horizontally, vertically and laterally making exact positioning

easy.

a cloth cover is provided to protect the lens from dust and

prevent the lens from causing damage if left in direct sunlight.

for additional magnification, secondary 4 and 8 dioptre lens

can be fixed to WaVe plus in seconds. a �0D swing away

lens is also available. it clamps onto the head and swings into

action when needed.

7

8321 Wave EsDDEsiGN: LuxO As / D sPrANGEr

WaVe esD is especially made for the electronic industry where static discharges can prove fatal for electronic components. WaVe esD is designed to drain away static charges as they occur in a controlled manner.

8

240

285

700 / 1040

Technical informaTion 83�� WaVe esD


8321-27-2b 3.5D black FsD 2x7 G23 1040 3.9







3,5 3,5 1,88 188% 286 1 420 175x108

40% of failures in electronic components can be traced back

to static electricity, damages estimated to cost billions every

year! a human body hardly feels a 3000 Volt static discharge,

while only �0 volts can be lethal to a class � esD component.

To ensure against static build up the head has been treated

with a layer of dissipative polyurethane coating and all metal

parts have special epoxy powder coating. The lens has a

conductive layer, which also reduces unwanted reflections and

gives superior viewing comfort. The large rectangular lens, �75

x �08 mm, permits comfortable viewing with both eyes.

The slim edge in front of the lens ensures that eye contact

with the object viewed is not lost when switching from

magnification to normal viewing and back again. The neck joint

between the head and arm moves in three planes: horizontally,

vertically and laterally making exact positioning easy. WaVe

esD offers shadow free magnification with light coming from

both sides, as well as three dimensional magnification with

light coming from the left or right. The 3D feature is especially

welcome when working with circuit boards. by illuminating

from one side only, depth perception is increased, positioning

and soldering of components is easier.

�

8310 LFm 101DEsiGN: LuxO

The versatility and robust construction of the lfm is acknowledged around the world by a wide variety of users. it combines high specifications with functional design, resulting in a long product life and customer satisfaction.

�0

265700 / 1040

230

Technical informaTion 83�0 lfm �0�


8310-122-301 3D White FsC 1x22 G10q 1040 3.4

8310-122-3G01 3D Grey FsC 1x22 G10q 1040 3.4


06-969-304-00 replacement lamp cool white 4000k

06-800-081-00 Attachment lens LFm 4D

06-800-091-00 Attachment lens LFm 8D



8990-028-1 Floor stand/trolley in white

DiopTers ToTal magnificaTion focal luX aT lens size (mm) primary aTTachmenT ToTal X % lengTh focal primary aTTachmenT lens lens (mm) lengTh lens lens

3 3 1,75 175% 333 1 720 ø125

3 4 7 2,75 275% 143 7 500 ø125 ø95

3 8 11 3,75 375% 91 8 670 ø125 ø74

While primarily intended for industrial use, the lfm adapts

equally well for domestic use. The magnifying head is made of

abs polymer, combining lightness with high impact strength.

The �� Watt energy saving circular fluorescent lamp provides

a high light output with a minimum of heat. The ø��7 mm glass

lens is positioned in the middle of the circular tube, the ideal

way of illuminating an object and virtually eliminating shadows.

a hinged lens cover is standard; it acts like a dust cover

and prevents the lens from causing damage if left in direct

sunlight. it is removable when not required. a transparent tube

protection cover, made from rigid polycarbonate is standard.

for additional magnification, secondary lenses can be fixed to

lfm in seconds.

��

8332 Circus medicalDEsiGN: ALEksANDEr bOGENHOF/FOrmEL iNDusTriDEsiGN

circus is eminently suitable for demanding work in hospitals, clinics, laboratories or as a tool for people with impaired vision. a large lens, self balancing arm and highly flexible shade neck makes it ideal for examinations.

��

3301000

115

270

Technical informaTion 833� circus meDical

approVals:

• Class 1 medical device. 93/42 EEC.

• EN 60601-1 medical electrical equipment, safety requirements.

• EN 60601-1-2 Electromagnetic compatibility

arTicle number colour lighT source WaTTage arm lengTh

for Table/floor sTanD

8332-122-1 White/blue T5-C 1x22 1000

8332-122-2 White/grey T5-C 1x22 1000

arTicle number accessories & alTernaTiVes

8970-001 Lens attachement CirCus-4D

8970-002 Lens attachement CirCus-6D

8990-011-1 C-bracket white

8990-014-0 TE-bracket (tablebushing)


lighT source WaTTage ilcos sockeT colour renDering lumen

Circular fluorescent lamp 22W FsCH 2Gx13 ra 85 1800 lumen

DiopTers ToTal magnificaTion focal luX aT lens size (mm)primary aTTachmenT ToTal X % lenghT focal primary aTTacmenTlens lens (mm) lenghT lens lens

3,5 3,5 1,88 188% 286 3 500 Ø165

3,5 4 7,5 2,88 288% 133 8 650 Ø165 Ø49

3,5 6 9,5 3,38 338% 105 8 720 Ø165 Ø49

circus is approved as a medical device according to iec

6060�-� and iec 6060�-�-�. it is a great tool for examinations

and outpatient treatment and as a supplementary luminaire in

any doctor’s office.

it is the most advanced illuminated magnifier ever designed. it

utilises the latest lamp technology using a high intensity ��W

circular T5 tube with very good color rendering capacity. The

tube is operated by high frequency ballast eliminating flickering

and prolonging lamp life.

circus has a very large “free floating” lens of ø�65mm giving

a large field of view with a very narrow frame around it. The

large lens permits comfortable viewing with both eyes.

a circular light source is the ideal way of illuminating an

object, virtually eliminating shadows.

carefully calculated reflector optics gives a very high light

intensity at focal distance.

circus has patented highly flexible self balancing shade neck.

The shade neck can be positioned horizontally, vertically

and laterally making the luminaire very flexible for most

examinations.

The fully covered spring balanced arm makes it easy to

position the luminaire in the correct position and makes

cleaning easy. a hinged lens cover is standard. it protects the

lens from dust and prevents the luminaire from inadvertently

turning into a burning glass. � different swing away attachment

lenses of 4 and 6 diopter are available.

�3

8318 Wave medicalDEsiGN: LuxO As / D sPrANGEr

The low heat output of WaVe medical is especially welcome for patient examination. The slim edge in front of the lens ensures that eye contact with the object viewed is not lost when swit-ching from magnification to normal viewing and back again.

�4

240

285

700 / 1040

Technical informaTion 83�8 WaVe meDical

approVals:






8318-27-2 White FsC 2x7 1040


06-800-140-00 Attachm. lens Wave+/4D

06-800-130-00 Attachm. lens Wave+/8D

06-800-120-00 secondary lens 10 diopter swing





Compact fluorescent lamp 7W FsD G23 ra 85 400 lumen

DiopTers ToTal magnificaTion focal luX aT lens size (mm)primary aTTachmenT ToTal X % lenghT focal primary aTTachmenTlens lens (mm) lenghT lens lens

3,5 3,5 1,88 188% 286 1 420 175x108

3,5 4 7,5 2,88 288% 133 3 790 175x108 Ø95

3,5 8 11,5 3,88 388% 87 4 320 175x108 Ø74

3,5 10 13,5 4,38 438% 74 4 180 175x108 Ø35

The large rectangular lens, �75 x �08 mm, permits

comfortable viewing with both eyes. for additional

magnification, secondary lenses can be fixed to WaVe plus in

seconds. a �0D swing way lens is also available.

WaVe medical is approved as a medical device according to

iec 6060�-�-� and ieD 6060�-�-�. it is the only magnifier to

offer both shadow free magnification with light coming from

both sides, as well as three dimensional magnification with

light coming from the left or right.

by illuminating from one side only, depth perception is

increased and positioning of tools in the magnified area is

made easier. The neck joint between the head and arm moves

in three planes: horizontally, vertically and laterally making

exact positioning easy. a cloth cover is provided to protect

the lens from dust and prevent the lens from inadvertently

turning into a burning glass.

�5

8306 LFm medicalDEsiGN: LuxO

The low heat output of the lamp and the versatility and robust construction of lfm medical makes it a great tool for patient examination and treatment at a very competitive cost.

�6

265

1040

230

Technical informaTion 8306 lfm meDical

approVals:




• EN 60601-2-41 safety of surgical luminaires and luminaires for diagnosis.



8306-122 White FsC 1x22 1040


06-800-081-00 Attachm. lens no 1 (4 diopter)

06-800-091-00 Attachm. lens no 2 (8 diopter)





Circular fluorescent lamp 22W FsCH G10q ra 80 1350 lumen

DiopTers ToTal magnificaTion focal luX aT lens size (mm) primary aTTachmenT ToTal X % lenghT focal primary aTTachmenT lens lens (mm) lenghT lens lens

3 3 1,75 175% 333 1 720 Ø125

3 4 7 2,75 275% 143 7 500 Ø125 Ø95

3 8 11 3,75 375% 91 8 670 Ø125 Ø74

lfm has several features for additional patient safety including

safety fuses on the primary side. lfm medical is approved as

a medical device according to iec 6060�-� and iec 6060�-�-�.

The magnifying head is made of abs polymer, combining light

weight design with high impact strength. The ø��7 mm glass

lens is positioned in the middle of the circular tube, the ideal

way of illuminating an object, virtually eliminating shadows.

a hinged lens cover is standard; it acts as a dust cover and

prevents the lens from inadvertently turning into a burning

glass. it is removable when not required. a transparent tube

protection cover, made from rigid polycarbonate is standard.

for additional magnification, secondary lenses can be fixed to

lfm medical in seconds.

�7

Accessoriesluxo supplies a wide variety of brackets to suit most applications.

please contact luxo for further information.

standard brackets

arTicle number name DescripTion

8990-010-1 AH-bracket white Our standard table clamp included

8990-010-2 AH-bracket black with all our table mount luminaires.

8990-010-3 AH-bracket light grey

8990-028-1 Trolley/Floorstand This trolley/floorstand works with all

our table mounted luminaires. This is

the ideal sollution when luminaires

might be used in several locations.

special purpose brackets

8990-011-1 C-bracket white A surface mounted table bracket.

8990-011-3 C-bracket l.grey Works with our table version

luminaires

8990-014-0 TE-bracket (tablebushing) Works with all our table mount

luminaires.

�8

normal �00%

magnification �75%

3 diopter primary lens

4 diopter attachment lens


3,5 diopter primary lens



magnification 375%



magnification 3�5%



magnification ��5%


magnification 338%






magnification 388%



magnification 438%





magnification 375%



magnificaTion

��

Prod

uct

num

ber

Prod

uct

dio

pter

sto

tal

mag

nific

atio

nFo

cal

leng

ht

(mm

)

LUX

at

foca

l le

nght

Lens

siz

e (m

m)

Lens

mat

eria

lLi

ght

sour

ceA

rm-

leng

ht

(mm

)

Prim

ary

brac

kets

Opt

iona

l br

acke

tsC

olor

sA

ppro

vals

Prim

ary

lens

Att

ach-

men

t le

ns

tota

lX

%Pr

imar

y le

nsA

ttac

h-m

ent

lens

Prim

ary

lens

Att

achm

ent

lens

8310

-122

LF

M3

31,

7517

5%33

316

25Ø

125

Gla

ss1x

22W

Circ

ular

T-8

1040

AH

-tab

le b

rack

et

Trol

ley

C-b

rack

etW

hite

RA

L 90

10,

Ligh

t gr

ey R

AL

7035

ENEC

34

72,

7527

5%14

375

00Ø

95G

lass

Gla

ss

38

113,

7537

5%91

8670

Ø74

Gla

ssG

lass

8306

-122

LF

M

med

ical

33

1,75

175%

333

1625

Ø12

5G

lass

1x22

W C

ircul

ar T-

810

40A

H-t

able

bra

cket

Tr

olle

yC

-bra

cket

Whi

te R

AL

9010

EN 6

0601

-1 E

N

6060

1-1-

23

47

2,75

275%

143

7500

Ø95

Gla

ssG

lass

38

113,

7537

5%91

8670

Ø74

Gla

ssG

lass

8312

-111

Mag

nifi

qu

e II

33

1,75

175%

333

2465

175x

108

Acr

ylic

1x11

W T

C-S

C

ompa

ct fl

uore

cent

1040

AH

-tab

le b

rack

et

Trol

ley

C-b

rack

etW

hite

RA

L 90

10EN

EC

3,5

3,5

1,88

188%

286

3200

Cro

wn

glas

s

44

2,00

200%

250

4220

Acr

ylic

66

2,50

250%

167

6730

Acr

ylic

8315

-27

WA

VE

Plu

s3,

53,

51,

8818

8%28

613

9017

5x10

8C

row

n gl

ass

2x7W

TC

-S

Com

pact

fluo

rece

nt10

40A

H-t

able

bra

cket

Tr

olle

yC

-bra

cket

Whi

te R

AL

9010

, Li

ght

grey

RA

L 70

35EN

EC

3,5

47,

52,

8828

8%13

337

90Ø

95C

row

n gl

ass

Cro

wn

glas

s

3,5

811

,53,

8838

8%87

4320

Ø74

Cro

wn

glas

sC

row

n gl

ass

3,5

1013

,54,

3843

8%74

4180

Ø35

Cro

wn

glas

sC

row

n gl

ass

8318

-27

WA

VE

m

edic

al3,

53,

51,

8818

8%28

613

9017

5x10

8C

row

n gl

ass

2x7W

TC

-S

Com

pact

fluo

rece

nt10

40A

H-t

able

bra

cket

Tr

olle

yC

-bra

cket

Whi

te R

AL

9010

EN 6

0601

-1 E

N

6060

1-1-

23,

54

7,5

2,88

288%

133

3790

Ø95

Cro

wn

glas

sC

row

n gl

ass

3,5

811

,53,

8838

8%87

4320

Ø74

Cro

wn

glas

sC

row

n gl

ass

3,5

1013

,54,

3843

8%74

4180

Ø35

Cro

wn

glas

sC

row

n gl

ass

8321

-27

WA

VE

ES

D3,

53,

51,

8818

8%28

613

9017

5x10

8C

row

n gl

ass

2x7W

TC

-S

Com

pact

fluo

rece

nt10

40A

H-t

able

bra

cket

Tr

olle

yC

-bra

cket

Whi

te R

AL

9010

ENEC

8330

-122

CIR

CU

S3,

53,

51,

8818

8%28

635

00Ø

165

Cro

wn

glas

s1x

22W

Circ

ular

T-5

1000

AH

-tab

le b

rack

etC

-bra

cket

Whi

te R

AL

9010

, Li

ght

grey

RA

L 70

35EN

EC

3,5

47,

52,

8828

8%13

386

50Ø

49C

row

n gl

ass

Cro

wn

glas

s

3,5

69,

53,

3833

8%10

587

20Ø

49C

row

n gl

ass

Cro

wn

glas

s

8331

-122

CIR

CU

S5

52,

2522

5%20

035

00Ø

165

Cro

wn

glas

s1x

22W

Circ

ular

T-5

1000

AH

-tab

le b

rack

etC

-bra

cket

Whi

te R

AL

9010

, Li

ght

grey

RA

L 70

35EN

EC

54

93,

2532

5%11

188

50Ø

49C

row

n gl

ass

Cro

wn

glas

s

56

113,

7537

5%91

8420

Ø49

Cro

wn

glas

sC

row

n gl

ass

8332

-122

CIR

CU

S

med

ical

3,5

3,5

1,88

188%

286

3500

Ø16

5C

row

n gl

ass

1x22

W C

ircul

ar T-

510

00A

H-t

able

bra

cket

C-b

rack

etW

hite

RA

L 90

10,

Ligh

t gr

ey R

AL

7035

EN 6

0601

-1 E

N

6060

1-1-

23,

54

7,5

2,88

288%

133

8650

Ø49

Cro

wn

glas

sC

row

n gl

ass

3,5

69,

53,

3833

8%10

587

20Ø

49C

row

n gl

ass

Cro

wn

glas

s

8333

-122

CIR

CU

S

med

ical

55

2,25

225%

200

3500

Ø16

5C

row

n gl

ass

1x22

W C

ircul

ar T-

510

00A

H-t

able

bra

cket

C-b

rack

etW

hite

RA

L 90

10,

Ligh

t gr

ey R

AL

7035

EN 6

0601

-1 E

N

6060

1-1-

25

49

3,25

325%

111

8850

Ø49

Cro

wn

glas

sC

row

n gl

ass

56

113,

7537

5%91

8420

Ø49

Cro

wn

glas

sC

row

n gl

ass

LUXO (UK) Ltd

Connect House, 21 Willow Lane

Mitcham, Surrey, CR4 4NA

telephone: 00 44 (0) 20 8274 3500

Facsimile: 00 44 (0) 20 8274 3501

E-mail: [email protected]

Internet: www.luxo.co.uk

Magnifiers - matedex.be · part of our business and we hold the ISO 14001 environmental approval....

Documents

Transcript of Magnifiers - matedex.be · part of our business and we hold the ISO 14001 environmental approval....