Magnetic Particle Testing (MPT) & Liquid Penetrant Testing (LPT) Products & Accessories

ISO 9001: 2015 Certied Company

Battery Operated Yoke

We offer full range of magnetic yokes like permanent magnets, AC/DC, Battery Operated etc. All these yokes are

designed to meet the highest standards (ASTM E1444) & operating conditions in the eld. All these yokes are portable,

light-weight & water resistant.

Salient Features of Yoke• DC led Intensity potentiometer• Articulated legs with span of 300mm

• Input single phase 110-250 VAC 50/60 Hz• Can be used for AC demagnetization

• No risk of sparking or “hot spots” on the job

AC Electromagnetic Yoke

Technical Specications

Weight

Leg Span

Lifting Capacity

Cord Length

Duty Cycle

Electrical Requirements

: 2.1 kg

: 4.5 Kg

: 0–11 in / 0–28 cm

: 10 ft. / 3 m

: 50%, max on time is 90 sec

: 230V – 50/60 Hz: 2.6 A 110V – 60 Hz: 1.2 A

AC/DC Electromagnetic Yoke

Technical Specications

Lifting Capacity

Leg Span

Cord Length

Duty Cycle

Electrical Requirements

Weight

DC mode : 18.1 Kg: AC mode : 4.5 Kg

2.2 Amps: 220V, 50Hz, 1 Phase

: 3.5 kg

: 0–11 in / 0–30 cm

: 10 ft. / 3 m

: 23% (3sec On followed by 10sec Off)

Technical Specications

Leg Span

Full Force

Duty Cycle

Yoke /Battery weight

Electrical Requirements

: 2 min “ON” and 4 min “OFF” at max output

: 12V DC, 2.0A at max load

100mm pole spacing

in DC, 2.2 Amps in AC

: Approx. 27 Kg max at

: 4 kg / 2.5 kg

: 0–11 in / 0–30 cm

Permanent Magnetic Yoke

Technical Specications

Poles Adjustment

Full Force

Weight

150mm pole spacing.

: 0 – 200 mm

: Approx. 19 Kgs max. at

: 2.2 Kgs

Electromagnetic Yokes

Power Packs

MPI Bench Machine

• Input single phase 220 VAC 50 Hz

Salient Features of APP Series Mobile Power Packs:

• Output: AC or Half Wave DC

• Inbuilt demagnetization function

• Find surface defects with AC current; switch

cable connection to half wave DC (HWDC) for

near-surface aws

• Locate defects in any direction using prods,

central conductor, coil (wrap part with 3-5 turns

of cable).

• Available in 1000, 1500, 2000, 3000, 4000 & 5000

& 6000 Amps

• Complied with ASTM standards

• Duty Cycle: 2-min ON/ 2-min OFF (50%)

• Thyristorised step less power control

• Output: AC or Half Wave DC

• Pneumatically operated head & manual operated

tail stock

• Complied with ASTM standards

• Main unit powder coated, SS tank & grill

• Available in 2000, 3000, 4000, 5000 & 6000 Amps

• Input three phase 440 VAC 50 Hz

• Versatile and durable for industrial environments

• Hood frame and black cloth with exhaust fan

Salient Features of ABM Series MPI Benches:

• LED Flood Lamps (optional)

We offer full range of mobile power packs or commonly known as prod type machine which are ideal for inspecting

large or heavy parts, in-service equipments or job-site weld testing with magnetic particle inspection.

The APP Series of mobile power packs are convenient and economical inspection units to meet a variety of magnetic

particle inspection needs. These units feature AC or Half Wave DC output.

The ABM Series of MPI Benches can be sized for specic test parts and to accommodate almost any size part. These benches are suitable for detecting surface as well as subsurface cracks in Longitudinal/ Horizontal direction.

We offer full range of magnetic particle inspection (MPI) benches which are designed for fast and reliable inspection needs.

AUL-150AUT-70 AUL-150B

Technical Specications

90-270VAC/ battery

operated

4 UV-A LED

AUL-150

≥8,000

≤ 10

≥ Ø200 mm

3 - 4 Hours

Anodized Aluminium

2 Hours

220 x Ø110 (LxD)

(1Kg)2.2lb

NA

AC Mains 90V - 270V, 50-60 Hz

≤ 10

≥ 300 mm x 200 mm

Continuous

10 UV-A LED

(3Kg)

AUF-350

300 x 150 x 65 (LxWxD)

Anodized Aluminium

6.61lb

≥6,000

Charge Time

Beam Coverage Area

Power Requirement

UV-A 365 Intensity at a distance of 15"(µw/cm²)

White Light Emission [Lux (0.92 fc)]

Light Source

Run Time

Housing Material

Housing

Weight

Dimensions (mm)

AUT-70

1 UV-A LED

≥2,000

≤10

≥ Ø80 mm

Battery operated

2 - 3 Hours

1 Hour

Anodized Aluminium

132mm x Ø32mm

(0.13Kg)0.28lb

AUL-100

1 UV-A LED

≤10

≥3,000

≥ Ø100 mm

Anodized Aluminium

battery operated

90-270VAC/

2 - 3 Hours

1 Hour

1.76lb(0.8Kg)

220 x Ø110 (LxD)

AUL-100D

≥ Ø150 mm

2 Hours

≥4,500

2 UV-A & 1 White LED

≤10

90-270VAC/ battery

operated

4 - 5 Hours

Anodized Aluminium

220 x Ø110 (LxD)

1.76lb(0.8Kg)

AUL-150D

≥8,000

≥ Ø200 mm

90-270VAC/ battery

operated

Anodized Aluminium

220 x Ø110 (LxD)

2.2lb(1Kg)

4 UV-A LED & 1 White LED

≤ 10

3 - 4 Hours

2 Hours

(0.43Kg)

AC Mains 100V - 264V,

50-60 Hz

Continuous

≤ 10

ABS Plastic

3 UV-A LED

≥6,000

AUB-150

≥ Ø150 mm

140 x Ø120 (LxD)

NA

0.94lb

Technical Specications

Salient Features

• Rechargeable Li-Po Battery

• Wavelength(peak): 365 nm ±5 nm

• As per ASTM E 3022-18

• Ergonomically Designed Robust Housing

• Mechanical Cooling System

• Constant Intensity

AUF-350

AUL-100D AUL-150AUT-70 AUB-150

LED UV Lamps

FlawGloRange of MPI Chemicals

Technical Data:

FlawGlo WV 20

ARDP-07/ABDP-01/ AGDP-08

FlawGlo WF 10

Model

FlawGlo CF 01

FlawGlo OF 01

FlawGlo OV 08

WCP - 04

BMI - 03

FMI - 06

(Aerosol Can)

Water Visible Powder

Black Magnetic Ink

Fluorescent Magnetic Ink (Aerosol Can)

White Contrast Paint

Oil Fluorescent Powder

Oil Visible Powder

(Aerosol Can)

ConcentrateFluorescent Liquid

Description

Water Fluorescent Powder

Red/Black/Grey Dry Powder

Dilution

10gm/litre

N A

1%

1gm/litre

20gm/litre

N A

N A

8gm/litre

N A

Approval & Specications:

NF EN ISO 9934-2, ASME BPVC, Section V,ASTM SE-709, ASTM E1444 - Section 5.8

NF EN ISO 9934-2, ASME BPVC, Section V,

NF EN ISO 9934-2, ASME BPVC, Section V,ASTM SE-709, ASTM E1444 - Section 5.8

ASTM E-1444, ASME BPVC, Sec V, AMS 2641, AMS 3041, EN ISO 9934-2

AMS 3044 Code RCC-M Tome III

ASTM SE-709, ASTM E1444, AMS 3040

NF EN ISO 9934-2, ASME BPVC, Section V,

AMS 3042

ASTM E-1444, ASME BPVC, Sec V, AMS 2641, AMS 3041, EN ISO 9934-2

NF EN ISO 9934-2, ASME BPVC, Section V,

ASTM SE-709, ASTM E1444 - Section 5.8

ASTM SE-709, ASTM E1444 - Section 5.8

NF EN ISO 9934-2, ASME BPVC, Section V,

ASTM SE-709, ASTM E1444 - Section 5.8

AMS 3041

ASTM E-1444, ASME BPVC, Sec V, AMS 2641, AMS 3041, EN ISO 9934-2

50 Ltrs.

420 ml

1/5/20/

1/5/20/50 Kgs

420 ml

1/5/20 Kgs

50 Kgs

420 ml

StandardPacking

1/5/20/50 Kgs

50/200 Kgs1/5/20/

1/5/20/

0• Temperature range 0 to 50 C

• Highly Sensitive Fluorescent as well as Visual• Low in Sulphur & Halogens• Superior Flaw Resolution

Salient Features

• Oil as well as Water Suspendable

• Wet particles: In the form of Powder & Liquid Concentrate

Magnetic Particle Testing Accessories

Ketos Ring Pie Gauge Gauss Meter - Analogue

Gauss Meter - Digital Centrifugal Tube with Stand Rubber Blower

Burmah Castrol Strips White/UV Light Meter MTU Test Block

Lifting Blocks Copper Braided PadsQuantitative Quality Indicators

FlawGloRange of LPT Chemicals

Technical Data:

WP - 125

Model

SP - 125

SD - 175

SC - 190

WFP - 578

SFP - 578

Description

Solvent Cleaner(Aerosol Can)

Solvent Penetrant

Solvent Suspendable

(Aerosol Can)

Developer (Aerosol Can)

Solvent Fluorescent

(Aerosol Can)

Penetrant (Aerosol Can)Water Washable Fluorescent

Penetrant (Aerosol Can)

Water Washable Penetrant

Sec V, IS-3658, AMS 2644, EN ISO 3452-2

Sec V, IS-3658, AMS 2644, EN ISO 3452-2

Sec V, IS-3658, AMS 2644, EN ISO 3452-2

Approval & Specications:

ASTM E-165, ASTM E-1417, ASME BPVC, Sec V, IS-3658, AMS 2644, EN ISO 3452-2

ASTM E-165, ASTM E-1417, ASME BPVC,

ASTM E-165, ASTM E-1417, ASME BPVC,

ASTM E-165, ASTM E-1417, ASME BPVC, Sec V, IS-3658, AMS 2644, EN ISO 3452-2

ASTM E-165, ASTM E-1417, ASME BPVC,

ASTM E-165, ASTM E-1417, ASME BPVC, Sec V, IS-3658, AMS 2644, EN ISO 3452-2

420 ml

420 ml

StandardPacking

420 ml

420 ml

420 ml

420 ml

• Excellent Reliability• Temperature range 10 to

050 C

Salient Features• Vivid, high contrast colour• Low in Sulphur & Halogens

• Water washable & Solvent type penetrant

• Superior Flaw Resolution

Aluminium Comparator BlockTAM/KDS Twin Test Panel Ni-Cr Test Block Reference Block Type 2

Liquid Penetrent Testing Accessories

About UsKeeping the vision of “Make in India”, M/s Arora Technologies (P) Limited (ATPL) is focussing on Manufacturing and

Distribution of NDT Products & Accessories.

We are committed to build long-term relationship with our customers by offering reliable products & accessories. We

pursue our business through innovation, latest technology & unrelenting quest for excellence.

Arora Technologies (P) Limited

619 & 620 The Great Eastern Galleria, Plot No. 20, Sector 4, Nerul, Navi Mumbai 400 706, Maharashtra, India

T: +91-22 6138 0600, 2770 3913, 2770 3923 | F: +91-22 2770 3903 | E: info@arorandt.com | W: www.arorandt.com

Spe

ci

ca

tio

ns

are

su

bje

cte

d t

o c

ha

ng

e w

ith

ou

t n

otic

e

ATP

L B

roc

hu

re M

PT/

LPT

20

19

/04

Re

v.

00

ISO 9001: 2015 Certied Company