Magic Bullet NutriBullet Outside Casing Replacement · 2019-09-17 · Magic Bullet NutriBullet...

6
Magic Bullet NutriBullet Outside Casing Replacement Replace the plastic casing which surrounds the NutriBullet powerbase. Written By: Angela Wong Magic Bullet NutriBullet Outside Casing Replacement Draft: 2016-03-01 Guide ID: 36402 - This document was generated on 2019-09-17 04:00:29 PM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 6

Transcript of Magic Bullet NutriBullet Outside Casing Replacement · 2019-09-17 · Magic Bullet NutriBullet...

Page 1: Magic Bullet NutriBullet Outside Casing Replacement · 2019-09-17 · Magic Bullet NutriBullet Outside Casing Replacement Replace the plastic casing which surrounds the NutriBullet

Magic Bullet NutriBullet Outside CasingReplacement

Replace the plastic casing which surrounds the NutriBullet powerbase.

Written By: Angela Wong

Magic Bullet NutriBullet Outside Casing Replacement Draft: 2016-03-01Guide ID: 36402 -

This document was generated on 2019-09-17 04:00:29 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 6

Page 2: Magic Bullet NutriBullet Outside Casing Replacement · 2019-09-17 · Magic Bullet NutriBullet Outside Casing Replacement Replace the plastic casing which surrounds the NutriBullet

INTRODUCTION

The exterior component of the NutriBullet’s powerbase consist of a silver, plastic shell casing. Usethis guide to replace the cylindrical shell to ensure no leakage, exposure of wires or spinningcomponents are showing through.

TOOLS:Phillips #2 Screwdriver (1)

Magic Bullet NutriBullet Outside Casing Replacement Draft: 2016-03-01Guide ID: 36402 -

This document was generated on 2019-09-17 04:00:29 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 6

Page 3: Magic Bullet NutriBullet Outside Casing Replacement · 2019-09-17 · Magic Bullet NutriBullet Outside Casing Replacement Replace the plastic casing which surrounds the NutriBullet

Step 1 — Curve Base

Unplug the device from the wall andturn the powerbase upside down.

Step 2

Use a #2 Phillips Head Screwdriver to unscrew the four 10 mm screws located on the bottom ofthe power base.

Magic Bullet NutriBullet Outside Casing Replacement Draft: 2016-03-01Guide ID: 36402 -

This document was generated on 2019-09-17 04:00:29 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 6

Page 4: Magic Bullet NutriBullet Outside Casing Replacement · 2019-09-17 · Magic Bullet NutriBullet Outside Casing Replacement Replace the plastic casing which surrounds the NutriBullet

Step 3

Use slight tension to remove theplastic base from the NutriBulletonce all of the screws are removed.

Once the plastic base is removed,there is a fan located in the center ofthe powerbase. Make sure the corddoes not get caught or frayed by thefan.

Step 4

Lift the power cord to remove it fromthe side slot on the curved base.

Magic Bullet NutriBullet Outside Casing Replacement Draft: 2016-03-01Guide ID: 36402 -

This document was generated on 2019-09-17 04:00:29 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 6

Page 5: Magic Bullet NutriBullet Outside Casing Replacement · 2019-09-17 · Magic Bullet NutriBullet Outside Casing Replacement Replace the plastic casing which surrounds the NutriBullet

Step 5

Use a #2 Phillips Head Screwdriver to remove the two 10 mm screws that secure the white bracketdown.

The white safety bracket holds the cord down. After removing it, the cord will be loosened.

Step 6

Use a #2 Phillips Head Screwdriverto remove the three 10mm screwsthat keep the base in place.

Magic Bullet NutriBullet Outside Casing Replacement Draft: 2016-03-01Guide ID: 36402 -

This document was generated on 2019-09-17 04:00:29 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 6

Page 6: Magic Bullet NutriBullet Outside Casing Replacement · 2019-09-17 · Magic Bullet NutriBullet Outside Casing Replacement Replace the plastic casing which surrounds the NutriBullet

To reassemble your device, follow these instructions in reverse order.

Step 7

Use slight tension to remove thecurved base by lifting it upward off ofthe outside casing.

Step 8 — Outside Casing

Wiggle the outside casing upwarduntil it separates from thepowerbase.

Hold the ring at the bottom of thepowerbase to receive a better grip.

Magic Bullet NutriBullet Outside Casing Replacement Draft: 2016-03-01Guide ID: 36402 -

This document was generated on 2019-09-17 04:00:29 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 6