MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils...
-
Upload
bartholomew-fields -
Category
Documents
-
view
221 -
download
4
Transcript of MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils...
![Page 1: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/1.jpg)
MAE 1202: AEROSPACE PRACTICUM
Lecture 6: Compressible and Isentropic Flow 2
Introduction to Airfoils
February 25, 2013
Mechanical and Aerospace Engineering Department
Florida Institute of Technology
D. R. Kirk
![Page 2: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/2.jpg)
READING AND HOMEWORK ASSIGNMENTS• Reading: Introduction to Flight, by John D. Anderson, Jr.
– For this week’s lecture: Chapter 5, Sections 5.1 - 5.5– Mid-Term Exam: Monday, March 18, 2013
• Exam will be given during laboratory session• Lecture material only (no MATLAB, CAD, etc.)• Covers Chapter 4 and 5 (through 5.5)• Mid-Term Exam Review: week after spring break during
evening
• Lecture-Based Homework Assignment:
– Problems: 5.2, 5.3, 5.4, 5.6
• DUE: Friday, March 1, 2013 by 5 PM
• Turn in hard copy of homework
– Also be sure to review and be familiar with textbook examples in Chapter 5
![Page 3: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/3.jpg)
ANSWERS TO LECTURE HOMEWORK• 5.2: L = 23.9 lb, D = 0.25 lb, Mc/4 = -2.68 lb ft
– Note 1: Two sets of lift and moment coefficient data are given for the NACA 1412 airfoil, with and without flap deflection. Make sure to read axis and legend properly, and use only flap retracted data.
– Note 2: The scale for cm,c/4 is different than that for cl, so be careful when reading the data
• 5.3: L = 308 N, D = 2.77 N, Mc/4 = - 0.925 N m
• 5.4: = 2°
• 5.6: (L/D)max ~ 112
![Page 4: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/4.jpg)
1st LAW OF THERMODYNAMICS (4.5)
• System (gas) composed of molecules moving in random motion• Energy of all molecular motion is called internal energy per unit mass, e, of
system
• Only two ways e can be increased (or decreased):1. Heat, q, added to (or removed from) system2. Work, w, is done on (or by) system
SYSTEM(unit mass of gas)
Boundary
SURROUNDINGS
q
wqde
e (J/kg)
![Page 5: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/5.jpg)
1st LAW IN MORE USEFUL FORM (4.5)
• 1st Law: de = q + w– Find more useful expression for w, in
terms of p and (or v = 1/)
• When volume varies → work is done• Work done on balloon, volume ↓• Work done by balloon, volume ↑
pdvqde
wqde
pdvw
sdAppsdAw
spdA
AA
ΔW
distanceforceΔW
Change inVolume (-)
![Page 6: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/6.jpg)
ENTHALPY: A USEFUL QUANTITY (4.5)
vdpdhq
vdpdedhdeq
pdvdeq
vdppdvdedh
RTepveh
Define a new quantitycalled enthalpy, h:(recall ideal gas law: pv = RT)
Differentiate
Substitute into 1st law(from previous slide)
Another version of 1st lawthat uses enthalpy, h:
![Page 7: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/7.jpg)
HEAT ADDITION AND SPECIFIC HEAT (4.5)
• Addition of q will cause a small change in temperature dT of system
• Specific heat is heat added per unit change in temperature of system
• Different materials have different specific heats
– Balloon filled with He, N2, Ar, water, lead, uranium, etc…
• ALSO, for a fixed dq, resulting dT depends on type of process…
Kkg
J
dT
qc
q
d
![Page 8: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/8.jpg)
SPECIFIC HEAT: CONSTANT PRESSURE• Addition of q will cause a small change in temperature dT of system• System pressure remains constant
Tch
dTcdh
dTcq
dT
qc
p
p
p
p
pressureconstant
q
d
Kkg
J
dT
qc
Extra Credit #1:Show this step
![Page 9: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/9.jpg)
SPECIFIC HEAT: CONSTANT VOLUME• Addition of q will cause a small change in temperature dT of system• System volume remains constant
Kkg
J
dT
qc
q
d
Tce
dTcde
dTcq
dT
qc
v
v
v
v
olumeconstant v
Extra Credit #2:Show this step
![Page 10: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/10.jpg)
HEAT ADDITION AND SPECIFIC HEAT (4.5)
• Addition of q will cause a small change in temperature dT of system
• Specific heat is heat added per unit change in temperature of system
Tch
dTcdh
dTcq
dT
qc
p
p
p
p
pressureconstant
• However, for a fixed dq, resulting dT depends on type of process:
Tce
dTcde
dTcq
dT
qc
v
v
v
v
olumeconstant v
Kkg
J
dT
qc
v
p
c
c
Specific heat ratioFor air, = 1.4
Constant Pressure Constant Volume
![Page 11: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/11.jpg)
ISENTROPIC FLOW (4.6)• Goal: Relate Thermodynamics to Compressible Flow
• Adiabatic Process: No heat is added or removed from system
– q = 0
– Note: Temperature can still change because of changing density
• Reversible Process: No friction (or other dissipative effects)
• Isentropic Process: (1) Adiabatic + (2) Reversible
– (1) No heat exchange + (2) no frictional losses
– Relevant for compressible flows only
– Provides important relationships among thermodynamic variables at two different points along a streamline
1
1
2
1
2
1
2
T
T
p
p = ratio of specific heats= cp/cv
air=1.4
![Page 12: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/12.jpg)
DERIVATION: ENERGY EQUATION (4.7)
022
0
0
0
0
0
21
22
12
2
1
2
1
VVhh
VdVdh
VdVdh
VdVvdh
VdVdp
vdpdhq
q
wqde
V
V
h
h
Energy can neither be created nor destroyedStart with 1st law
Adiabatic, q=01st law in terms of enthalpy
Recall Euler’s equation
Combine
Integrate
Result: frictionless + adiabatic flow
![Page 13: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/13.jpg)
ENERGY EQUATION SUMMARY (4.7)• Energy can neither be created nor destroyed; can only change physical form
– Same idea as 1st law of thermodynamics
constant2
222
22
2
21
1
Vh
Vh
Vh
constant2
222
22
2
21
1
VTc
VTc
VTc
p
pp
Energy equation for frictionless,adiabatic flow (isentropic)
h = enthalpy = e+p/= e+RTh = cpT for an ideal gas
Also energy equation forfrictionless, adiabatic flow
Relates T and V at two different points along a streamline
![Page 14: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/14.jpg)
SUMMARY OF GOVERNING EQUATIONS (4.8)STEADY AND INVISCID FLOW
222
211
2211
2
1
2
1VpVp
VAVA
222
111
222
211
1
2
1
2
1
2
1
222111
2
1
2
1
RTp
RTp
VTcVTc
T
T
p
p
VAVA
pp
• Incompressible flow of fluid along a streamline or in a stream tube of varying area
• Most important variables: p and V
• T and are constants throughout flow
• Compressible, isentropic (adiabatic and frictionless) flow along a streamline or in a stream tube of varying area
• T, p, , and V are all variables
continuity
Bernoulli
continuity
isentropic
energy
equation of stateat any point
![Page 15: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/15.jpg)
EXAMPLE: SPEED OF SOUND (4.9)• Sound waves travel through air at a finite speed
• Sound speed (information speed) has an important role in aerodynamics
• Combine conservation of mass, Euler’s equation and isentropic relations:
RTp
a
a
VM
• Speed of sound, a, in a perfect gas depends only on temperature of gas
• Mach number = flow velocity normalizes by speed of sound
– If M < 1 flow is subsonic
– If M = 1 flow is sonic
– If M > flow is supersonic
• If M < 0.3 flow may be considered incompressible
d
dpa 2
![Page 16: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/16.jpg)
KEY TERMS: CAN YOU DEFINE THEM?
• Streamline
• Stream tube
• Steady flow
• Unsteady flow
• Viscid flow
• Inviscid flow
• Compressible flow
• Incompressible flow
• Laminar flow
• Turbulent flow
• Constant pressure process
• Constant volume process
• Adiabatic
• Reversible
• Isentropic
• Enthalpy
![Page 17: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/17.jpg)
EXAMPLES AND APPLICATIONS
Measurement of AirspeedShock Waves
Supersonic Wind Tunnels and Rocket Nozzles
![Page 18: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/18.jpg)
MEASUREMENT OF AIRSPEED:SUBSONIC COMRESSIBLE FLOW
• If M > 0.3, flow is compressible (density changes are important)
• Need to introduce energy equation and isentropic relations
21
1
0
1
21
1
0
02
11
2
11
21
2
1
MT
T
Tc
V
T
T
TcVTc
p
pp
11
21
1
0
12
11
0
2
11
2
11
M
Mp
p
cp: specific heat at constant pressureM1=V1/a1
air=1.4
![Page 19: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/19.jpg)
MEASUREMENT OF AIRSPEED:SUBSONIC COMRESSIBLE FLOW
• So, how do we use these results to measure airspeed
111
2
111
2
11
2
11
2
1
102
2
1
1
10212
1
1
1
0212
1
1
1
021
s
scal p
ppaV
p
ppaV
p
paV
p
pM
p0 and p1 giveFlight Mach numberMach meter
M1=V1/a1
Actual Flight Speed
Actual Flight Speedusing pressure difference
What is T1 and a1?Again use sea-level conditions Ts, as, ps (a1=340.3 m/s)
![Page 20: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/20.jpg)
EXAMPLE: TOTAL TEMPERATURE
• A rocket is flying at Mach 6 through a portion of the atmosphere where the static temperature is 200 K
• What temperature does the nose of the rocket ‘feel’?
• T0 = 200(1+ 0.2(36)) = 1,640 K!
21
1
0
2
11 M
T
T
Total temperature
Static temperature Vehicle flightMach number
![Page 21: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/21.jpg)
MEASUREMENT OF AIRSPEED:SUPERSONIC FLOW
• What can happen in supersonic flows?
• Supersonic flows (M > 1) are qualitatively and quantitatively different from subsonic flows (M < 1)
![Page 22: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/22.jpg)
HOW AND WHY DOES A SHOCK WAVE FORM?
• Think of a as ‘information speed’ and M=V/a as ratio of flow speed to information speed
• If M < 1 information available throughout flow field
• If M > 1 information confined to some region of flow field
![Page 23: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/23.jpg)
MEASUREMENT OF AIRSPEED:SUPERSONIC FLOW
1
21
124
1 21
1
21
21
2
1
02
M
M
M
p
p
Notice how different this expression is from previous expressionsYou will learn a lot more about shock wave in compressible flow course
![Page 24: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/24.jpg)
SUMMARY OF AIR SPEED MEASUREMENT
• Subsonic, incompressible
• Subsonic, compressible
• Supersonic
1
21
124
1 21
1
21
21
2
1
02
M
M
M
p
p
111
21
102
2
s
scal p
ppaV
s
e
ppV
02
![Page 25: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/25.jpg)
HOW ARE ROCKET NOZZLES SHAPPED?
![Page 26: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/26.jpg)
MORE ON SUPERSONIC FLOWS (4.13)
V
dVM
A
dAV
dV
A
dA
a
VdV
V
dV
A
dA
dp
VdVd
VdVdp
V
dV
A
dAd
AV
1
0
0
0
constantlnlnVlnAln
constant
2
2
Isentropic flow in a streamtube
Differentiate
Euler’s Equation
Since flow is isentropica2=dp/d
Area-Velocity Relation
![Page 27: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/27.jpg)
CONSEQUENCES OF AREA-VELOCITY RELATION
V
dVM
A
dA12
• IF Flow is Subsonic (M < 1)
– For V to increase (dV positive) area must decrease (dA negative)
– Note that this is consistent with Euler’s equation for dV and dp
• IF Flow is Supersonic (M > 1)
– For V to increase (dV positive) area must increase (dA positive)
• IF Flow is Sonic (M = 1)
– M = 1 occurs at a minimum area of cross-section
– Minimum area is called a throat (dA/A = 0)
![Page 28: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/28.jpg)
TRENDS: CONTRACTION
M1 < 1
M1 > 1
V2 > V1
V2 < V1
1: INLET 2: OUTLET
![Page 29: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/29.jpg)
TRENDS: EXPANSION
M1 < 1
M1 > 1
V2 < V1
V2 > V1
1: INLET 2: OUTLET
![Page 30: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/30.jpg)
PUT IT TOGETHER: C-D NOZZLE
1: INLET 2: OUTLET
![Page 31: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/31.jpg)
MORE ON SUPERSONIC FLOWS (4.13)
• A converging-diverging, with a minimum area throat, is necessary to produce a supersonic flow from rest
Supersonic wind tunnel section Rocket nozzle
![Page 32: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/32.jpg)
Chapter 5 Overview
![Page 33: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/33.jpg)
HOW DOES AN AIRFOIL GENERATE LIFT?• Lift due to imbalance of pressure distribution over top and bottom surfaces of
airfoil (or wing)
– If pressure on top is lower than pressure on bottom surface, lift is generated
– Why is pressure lower on top surface?
• We can understand answer from basic physics:
– Continuity (Mass Conservation)
– Newton’s 2nd law (Euler or Bernoulli Equation)
Lift = PA
![Page 34: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/34.jpg)
HOW DOES AN AIRFOIL GENERATE LIFT?1. Flow velocity over top of airfoil is faster than over bottom surface
– Streamtube A senses upper portion of airfoil as an obstruction
– Streamtube A is squashed to smaller cross-sectional area
– Mass continuity AV=constant: IF A↓ THEN V↑
Streamtube A is squashedmost in nose region(ahead of maximum thickness)
AB
![Page 35: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/35.jpg)
HOW DOES AN AIRFOIL GENERATE LIFT?2. As V ↑ p↓
– Incompressible: Bernoulli’s Equation
– Compressible: Euler’s Equation
– Called Bernoulli Effect
3. With lower pressure over upper surface and higher pressure over bottom surface, airfoil feels a net force in upward direction → Lift
VdVdp
Vp
constant2
1 2
Most of lift is producedin first 20-30% of wing(just downstream of leading edge)
Can you express these ideas in your own words?
![Page 36: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/36.jpg)
AIRFOILS VERSUS WINGS
Why do airfoils have such a shape?
How are lift and drag produced?
NACA airfoil performance data
How do we design?What is limit of behavior?
![Page 37: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/37.jpg)
AIRFOIL THICKNESS: WWI AIRPLANES
English Sopwith Camel
German Fokker Dr-1
Higher maximum CL
Internal wing structureHigher rates of climbImproved maneuverability
Thin wing, lower maximum CL
Bracing wires required – high drag
![Page 38: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/38.jpg)
AIRFOIL NOMENCLATURE
• Mean Chamber Line: Set of points halfway between upper and lower surfaces
– Measured perpendicular to mean chamber line itself
• Leading Edge: Most forward point of mean chamber line
• Trailing Edge: Most reward point of mean chamber line
• Chord Line: Straight line connecting the leading and trailing edges
• Chord, c: Distance along the chord line from leading to trailing edge
• Chamber: Maximum distance between mean chamber line and chord line
– Measured perpendicular to chord line
![Page 39: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/39.jpg)
NACA FOUR-DIGIT SERIES• First digit specifies maximum camber in percentage of chord
• Second digit indicates position of maximum camber in tenths of chord
• Last two digits provide maximum thickness of airfoil in percentage of chord
Example: NACA 2415• Airfoil has maximum thickness of 15%
of chord (0.15c)
• Camber of 2% (0.02c) located 40%
back from airfoil leading edge (0.4c)
NACA 2415
![Page 40: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/40.jpg)
WHAT CREATES AERODYNAMIC FORCES? (2.2)• Aerodynamic forces exerted by airflow comes from only two sources:
1. Pressure, p, distribution on surface• Acts normal to surface
2. Shear stress, w, (friction) on surface• Acts tangentially to surface
• Pressure and shear are in units of force per unit area (N/m2)• Net unbalance creates an aerodynamic force
“No matter how complex the flow field, and no matter how complex the shape of the body, the only way nature has of communicating an aerodynamic force to a solid object or surface is through the pressure and shear stress distributions that exist on the surface.”
“The pressure and shear stress distributions are the two hands of nature that reach out and grab the body, exerting a force on the body – the aerodynamic force”
![Page 41: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/41.jpg)
RESOLVING THE AERODYNAMIC FORCE• Relative Wind: Direction of V∞
– We use subscript ∞ to indicate far upstream conditions• Angle of Attack, Angle between relative wind (V∞) and chord line
• Total aerodynamic force, R, can be resolved into two force components– Lift, L: Component of aerodynamic force perpendicular to relative wind– Drag, D: Component of aerodynamic force parallel to relative wind
![Page 42: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/42.jpg)
MORE DEFINITIONS• Total aerodynamic force on airfoil is summation of F1 and F2
• Lift is obtained when F2 > F1
• Misalignment of F1 and F2 creates Moments, M, which tend to rotate airfoil/wing
– A moment (torque) is a force times a distance
• Value of induced moment depends on point about which moments are taken
– Moments about leading edge, MLE, or quarter-chord point, c/4, Mc/4
– In general MLE ≠ Mc/4
F1
F2
![Page 43: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/43.jpg)
VARIATION OF L, D, AND M WITH • Lift, Drag, and Moments on a airfoil or wing will change as changes
• Variations of these quantities are some of most important information that an airplane designer needs to know
• Aerodynamic Center
– Point about which moments essentially do not vary with – Mac=constant (independent of )
– For low speed airfoils aerodynamic center is near quarter-chord point, c/4
![Page 44: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/44.jpg)
AOA = 2°
![Page 45: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/45.jpg)
AOA = 3°
![Page 46: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/46.jpg)
AOA = 6°
![Page 47: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/47.jpg)
AOA = 9°
![Page 48: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/48.jpg)
AOA = 12°
![Page 49: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/49.jpg)
AOA = 20°
![Page 50: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/50.jpg)
AOA = 60°
![Page 51: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/51.jpg)
AOA = 90°
![Page 52: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/52.jpg)
SAMPLE DATA: SYMMETRIC AIRFOIL
Lif
t (fo
r no
w)
Angle of Attack,
A symmetric airfoil generates zero lift at zero
![Page 53: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/53.jpg)
SAMPLE DATA: CAMBERED AIRFOIL
Lif
t (fo
r no
w)
Angle of Attack,
A cambered airfoil generates positive lift at zero
![Page 54: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/54.jpg)
SAMPLE DATA• Lift coefficient (or lift) linear
variation with angle of attack, a
– Cambered airfoils have positive lift when = 0
– Symmetric airfoils have zero lift when = 0
• At high enough angle of attack, the performance of the airfoil rapidly degrades → stall
Lif
t (fo
r no
w)
Cambered airfoil haslift at =0At negative airfoilwill have zero lift
![Page 55: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/55.jpg)
SAMPLE DATA: STALL BEHAVIORL
ift (
for
now
)
What is really going on here
What is stall?
Can we predict it?
Can we design for it?
![Page 56: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/56.jpg)
WHY DOES LIFT CURVE BEND OVER?
http://www.soton.ac.uk/Racing/Greenpower/BoundaryLayers/
Low
Moderate
High
![Page 57: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/57.jpg)
REAL EFFECTS: VISCOSITY ()• To understand drag and actual airfoil/wing behavior we need an understanding of
viscous flows (all real flows have friction)
• Inviscid (frictionless) flow around a body will result in zero drag!
– This is called d’Alembert’s paradox
– Must include friction (viscosity, ) in theory
• Flow adheres to surface because of friction between gas and solid boundary
– At surface flow velocity is zero, called ‘No-Slip Condition’
– Thin region of retarded flow in vicinity of surface, called a ‘Boundary Layer’
• At outer edge of B.L., V∞
• At solid boundary, V=0
“The presence of friction in the flow causes a shear stress at the surface of a body, which, in turn contributes to the aerodynamic drag of the body: skin friction drag” p.219, Section 4.20
![Page 58: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/58.jpg)
TYPES OF FLOWS: FRICTION VS. NO-FRICTION
Flow very close to surface of airfoil isInfluenced by friction and is viscous(boundary layer flow)Stall (separation) is a viscous phenomena
Flow away from airfoil is not influencedby friction and is wholly inviscid
![Page 59: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/59.jpg)
COMMENTS ON VISCOUS FLOWS (4.15)
![Page 60: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/60.jpg)
THE REYNOLDS NUMBER, Re• One of most important dimensionless numbers in fluid mechanics/ aerodynamics• Reynolds number is ratio of two forces:
– Inertial Forces– Viscous Forces– c is length scale (chord)
• Reynolds number tells you when viscous forces are important and when viscosity may be neglected
cVRe
Within B.L. flowhighly viscous(low Re)
Outside B.L. flowInviscid (high Re)
![Page 61: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/61.jpg)
LAMINAR VS. TURBULENT FLOW• Two types of viscous flows
– Laminar: streamlines are smooth and regular and a fluid element moves smoothly along a streamline
– Turbulent: streamlines break up and fluid elements move in a random, irregular, and chaotic fashion
![Page 62: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/62.jpg)
LAMINAR VS. TURBULENT FLOW
All B.L.’s transition from laminar to turbulent
cf,turb > cf,lam
Turbulent velocityprofiles are ‘fuller’
![Page 63: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/63.jpg)
FLOW SEPARATION• Key to understanding: Friction causes flow separation within boundary layer
• Separation then creates another form of drag called pressure drag due to separation
![Page 64: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/64.jpg)
REVIEW: AIRFOIL STALL (4.20, 5.4)• Key to understanding: Friction causes flow separation within boundary layer
1. B.L. either laminar or turbulent
2. All laminar B.L. → turbulent B.L.
3. Turbulent B.L. ‘fuller’ than laminar B.L., more resistant to separation
• Separation creates another form of drag called pressure drag due to separation
– Dramatic loss of lift and increase in drag
![Page 65: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/65.jpg)
SUMMARY OF VISCOUS EFFECTS ON DRAG (4.21)
• Friction has two effects:
1. Skin friction due to shear stress at wall
2. Pressure drag due to flow separation
pressurefriction DDD Total drag due toviscous effectsCalled Profile Drag
Drag due toskin friction
Drag due toseparation= +
Less for laminarMore for turbulent
More for laminarLess for turbulent
So how do you design?Depends on case by case basis, no definitive answer!
![Page 66: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/66.jpg)
COMPARISON OF DRAG FORCES
d
d
Same total drag as airfoil
![Page 67: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/67.jpg)
TRUCK SPOILER EXAMPLE• Note ‘messy’ or
turbulent flow pattern
• High drag
• Lower fuel efficiency
• Spoiler angle increased by + 5°
• Flow behavior more closely resembles a laminar flow
• Tremendous savings (< $10,000/yr) on Miami-NYC route
![Page 68: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/68.jpg)
LIFT, DRAG, AND MOMENT COEFFICIENTS (5.3)• Behavior of L, D, and M depend on , but also on velocity and altitude
– V∞, ∞, Wing Area (S), Wing Shape, ∞, compressibility
• Characterize behavior of L, D, M with coefficients (cl, cd, cm)
Re,,21
2
1
2
2
Mfc
Sq
L
SV
Lc
ScVL
l
l
l
Matching Mach and Reynolds(called similarity parameters)
M∞, Re
M∞, Re
cl, cd, cm identical
![Page 69: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/69.jpg)
LIFT, DRAG, AND MOMENT COEFFICIENTS (5.3)• Behavior of L, D, and M depend on , but also on velocity and altitude
– V∞, ∞, Wing Area (S), Wing Shape, ∞, compressibility
• Characterize behavior of L, D, M with coefficients (cl, cd, cm)
Re,,21
2
1
3
2
2
Mfc
Scq
L
ScV
Mc
SccVM
m
m
m
Re,,21
2
1
2
2
2
Mfc
Sq
D
SV
Dc
ScVD
d
d
d
Re,,21
2
1
1
2
2
Mfc
Sq
L
SV
Lc
ScVL
l
l
l
Note on Notation:We use lower case, cl, cd, and cm for infinite wings (airfoils)We use upper case, CL, CD, and CM for finite wings
![Page 70: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/70.jpg)
SAMPLE DATA: NACA 23012 AIRFOIL
Lift Coefficientcl
Moment Coefficientcm, c/4
Flow separationStall
![Page 71: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/71.jpg)
AIRFOIL DATA (5.4 AND APPENDIX D)NACA 23012 WING SECTION
c l
c m,c
/4
Re dependence at high Separation and Stall
cl
c dc m
,a.c
.
cl vs. Independent of Re
cd vs. Dependent on Re
cm,a.c. vs. cl very flat
R=Re
![Page 72: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/72.jpg)
EXAMPLE: SLATS AND FLAPS
![Page 73: MAE 1202: AEROSPACE PRACTICUM Lecture 6: Compressible and Isentropic Flow 2 Introduction to Airfoils February 25, 2013 Mechanical and Aerospace Engineering.](https://reader037.fdocuments.in/reader037/viewer/2022102909/56649e925503460f94b983f8/html5/thumbnails/73.jpg)
Flap extended
Flap retracted
AIRFOIL DATA (5.4 AND APPENDIX D)NACA 1408 WING SECTION