MACPAC REFUSE BODIES - Stewart Commercials · General Description. MacPac Refuse Bodies Ltd have...
10
www.macpacrefusebodies.co.uk MACPAC REFUSE BODIES Food Waste Vehicles
Transcript of MACPAC REFUSE BODIES - Stewart Commercials · General Description. MacPac Refuse Bodies Ltd have...
www.macpacrefusebodies.co.uk
MACPAC REFUSE BODIES
Food Waste Vehicles
www.macpacrefusebodies.co.uk
General Description.
MacPac Refuse Bodies Ltd have been working to extend the capability of the range of
products offered & now includes Food Waste Vehicles that will assist both existing & new
customers deal with the demands of the Food Waste Regulations in Northern Ireland and
beyond. (http://www.legislation.gov.uk/nisr/2015/14/pdfs/nisr_20150014_en.pdf).
This means we can now offer Refuse Vehicle solutions that are capable of facilitating the
safe & controlled collection / transport of food waste whilst offering key benefits such as:
Varying Payload options from 2.5t – 8t .
Double Sealed Rear Door- reducing spillages & losses during collection & transport.
Fully Enclosed Body –allowing for safe & controlled collection / transport of waste.
Enclosed Ejector Blade – ensuring waste product is not trapped in body/ blade.
Non Tipping Eject Procedure- enabling low mess during emptying & reducing
spillages & splashback.
4 Ram Hydraulic Operation- assisting low maintenance & ease of operation.
Manufactured using High Wear & High Corrosion Resistance Steel – increasing
vehicle service life.
Plastic Waste Trap Plate- can be replaced easily during vehicle life, ensuring all
waste is ejected.
Bin Weighing & Vehicle Weighing options.
Non Compaction Blade options.
www.macpacrefusebodies.co.uk
MACPAC 65s SPECIFICATION
MAKE AND TYPE MACPAC 65s CAPACITY 6.5 cubic metres
MATERIAL High tensile steel A53 OVERALL WIDTH OF VEHICLE 2.2 Metres
HEIGHT OF VEHICLE 2.7 Metres (chassis dependant)
COMPACTION RATIO 3:1 HOW IS COMPACTION CYCLE
CONTROLLED Hydraulic pressure signal to return
Solenoid operated hydraulic control HOW IS EJECTION CYCLE CONTROLLED Solenoid operated hydraulic control
SAFETY FEATURES Fully interlocked on loading doors, bin lifter and tailgate
LOCATION OF MANUAL LOADING APERTURE
Front near side and off side of body
LOADING Side loading body
BIN LIFTER Manual lifter capable of lifting all bins up to 1100 litres
HOPPER Fully enclosed hopper PAYLOAD Up to 2.7 TONNE (chassis dependant)
Secondary rear door lock to ensure
better seal
Optional bin weighing system VWS
www.macpacrefusebodies.co.uk
MACPAC 65s SPECIFICATION
HIGH COMPACTION RATIO HELPING REDUCE COSTS
Compaction ratio of 3:1 allows smaller body, lowers the centre of gravity, reducing wind
drag in turn lower fuel costs and lower volume of waste to landfill
UP TO 2.7 TONNE PAYLOAD ON 7.5 TONNE CHASSIS.(chassis dependant)
BODY SIZE OF 6.5M3
More collections per route
HIGH COMPACTION FROM LOW REVS
reducing engine wear
AVERAGE 12 SECOND CYCLE PER BIN
MULTIFUNCTIONAL
Non- compaction mode at the touch of a button
DESIGNED FOR MAXIMUM SAFETY
Operatives work at side of vehicle clear from the rear impact zone and easily visible to driver
at all times
BUILT IN SAFETY FEATURES INCLUDING EASY LOAD EJECTION FROM CAB
The loading doors cannot be opened while compaction is in operation, any attempt to do so
stops the operation
FULLY ENCLOSED HOPPER AND SEALED BODY
Can also be used for food waste collections
ROBUST DESIGN
Made from high “Grade A” Steel” spec steel
www.macpacrefusebodies.co.uk
MACPAC 65s Dimensions:
11 SPRINGFARM INDUSTRIAL ESTATE,
ANTRIM, BT41 4NZ
TEL: 028 9446 3752
600
2700
6500
4700
800
3800
1600
1800
www.macpacrefusebodies.co.uk
MACPAC 110S REFUSE BODY
www.macpacrefusebodies.co.uk
MACPAC 110s SPECIFICATION
HIGH COMPACTION RATIO HELPING REDUCE COSTS
Compaction ratio of 3:1, lowers the centre of gravity, reducing wind drag in turn lower fuel
costs and lower volume of waste to landfill
UP TO 5.5 TONNE PAYLOAD for 12 Ton Chassis .(chassis dependant)
BODY SIZE OF 11M3
More collections per route
HIGH COMPACTION FROM LOW REVS
reducing engine wear
MULTIFUNCTIONAL
Non- compaction mode at the touch of a button
DESIGNED FOR MAXIMUM SAFETY
Operatives work at side of vehicle clear from the rear impact zone and easily visible to driver
at all times
BUILT IN SAFETY FEATURES INCLUDING EASY LOAD EJECTION FROM CAB
The loading doors cannot be opened while compaction is in operation, any attempt to do so
stops the operation
FULLY ENCLOSED HOPPER AND SEALED BODY
Can also be used for food waste collections
ROBUST DESIGN
Made from high spec steel
www.macpacrefusebodies.co.uk
MACPAC 110s SPECIFICATION
MAKE AND TYPE MACPAC 110s
CAPACITY 11 cubic metres
MATERIAL High tensile steel Grade A Steel OVERALL WIDTH OF VEHICLE 2.3 Metres
HEIGHT OF VEHICLE 3.3 Metres
WHEEL BASE 3.8 Metres -4.3 Metres COMPACTION RATIO 3:1
HOW IS COMPACTION CYCLE CONTROLLED
Adjustable timer for half pack Hydraulic pressure signal to return
Solenoid operated hydraulic control HOW IS EJECTION CYCLE CONTROLLED Solenoid operated hydraulic control
SAFETY FEATURES Fully interlocked on loading doors, bin lifter and tailgate
LOCATION OF MANUAL LOADING APERTURE
Front near side and off side of body
LOADING Side loading body BIN LIFTER Manual lifter capable of lifting all
bins up to 1100 litres HOPPER Fully enclosed hopper
PAYLOAD (subject to chassis choice) UP TO 8.0 TONNE.(chassis
dependant)
Secondary rear door lock to ensure
better seal Optional bin weighing system VWS
www.macpacrefusebodies.co.uk
MACPAC 110s Dimensions:
11 SPRINGFARM INDUSTRIAL ESTATE,
ANTRIM, BT41 4NZ
TEL: 028 9446 3752
3300
7400
5600
600
4300
600
1800
1700
www.macpacrefusebodies.co.uk
CONTACT DETAILS
Sales:
Jason Stewart
T: 07850602727
Service:
Macpac refuse bodies
Stewart Commercials Ltd
11 Springfarm Industrial Estate
Antrim
Bt41 4nz
T: 028 9446 3752
Tech Support:
Drew Stewart
T: 078665119832
T: 028 9446 3752
http://www.youtube.com/channel/UCiVlMZBvAZF83YJAnwnNKkQ
Product/ Customer Feedback:
Eoin Regan
