Machine Specification #A252 Used Horizontal oring Mill TOS ...Machine Specification #A252 Used...
4
Page 1 CanAmera Machine Tools Inc. Fine machinery for your shop! 99 Green Bank Drive, Cambridge, ON N1T 2B5 Tel: 905-878-0888 Cell: 905-691-6679, [email protected] www.CanAmeraMachineTools.com Machine Specificaon #CA252 Used Horizontal Boring Mill TOS Varnsdorf WHN-13.8 CNC Machine Type CNC Table Type Horizontal Boring Mill Manufacturer TOS Varnsdorf New in 2003 Control Heidenhani TNC 426 Origin Czech Republic Locaon Germany Terms of delivery Free loaded on truck Condion Excellent Descripon:
Transcript of Machine Specification #A252 Used Horizontal oring Mill TOS ...Machine Specification #A252 Used...
-
Page 1
CanAmera Machine Tools Inc. Fine machinery for your shop!
99 Green Bank Drive, Cambridge, ON N1T 2B5
Tel: 905-878-0888 Cell: 905-691-6679, [email protected]
www.CanAmeraMachineTools.com
Machine Specification #CA252
Used Horizontal Boring Mill
TOS Varnsdorf WHN-13.8 CNC
Machine Type CNC Table Type Horizontal Boring Mill
Manufacturer TOS Varnsdorf
New in 2003
Control Heidenhani TNC 426
Origin Czech Republic
Location Germany
Terms of delivery Free loaded on truck
Condition Excellent
Description:
-
Page 2
CanAmera Machine Tools Inc. Fine machinery for your shop!
Technical Details Spindle diameter 130 mm 5.12 inch
X-travel (Cross travel of the table) 3,500 mm 137.8 inch
Y-travel (Vertical travel of the headstock) 2,500 mm 97.4 inch
Z-Travel (Longitudinal travel of the column) 1,250 mm 49.2 inch
W-Travel (Quill) 800 mm 2.62 inch
Table size 1,800 x 2,200 mm 70.8 x 86.6 inch
Table load capacity 12000 kg 26455 lbs
Spindle speed range 10 - 2800 rpm 10 - 2800 rpm
Main spindle motor 37 kW 50 HP
spindle taper ISO 50 ISO 50
Table indexing Full axis Full axis
Working feeds of the machine groups X, Y, Z and W 4 - 6,000 mm/min 0.15—236 inch/min
Working feed of the machine group B 360 grad/min 360 grad/min
Max. torque of the spindle (up to the rated speed) 1,271 Nm 937 lbf/ft
Position feedback of the machine groups X, Y, Z and W Linear scale
Position feedback of the machine groups B and C Rotary encoder
Number of NC-controlled machine groups 5
Number of NC-positioned machine groups 2
Number of hydraulically clamped machine groups 4
Max. feed forces X, Y and W 30 kN
Max. feed force Z 40 kN
Max. lifting capacity of clamping B 25 kN
Weight of the Machine 38,650 kg 85,210 lbs
Other information
Electronic hand wheel Model HR 410 Oil-cooling unit SCHIMPKE Model TK28 Strengthened and additional coolant device User guide / Documentation Machine parameters on CD
DISCLAIMER: Prices written in this document are indicative only and not binding in judicial sense. All quotations are subject to prior sale, immediate acceptance or change without notice.
Technical details are provided in our best belief and are not binding. All quotations are subject to our General Terms and Conditions.
-
Page 3
CanAmera Machine Tools Inc. Fine machinery for your shop!
-
Page 4
CanAmera Machine Tools Inc. Fine machinery for your shop!
