Machine Safety Equipments
-
Upload
ef-society -
Category
Education
-
view
449 -
download
2
description
Transcript of Machine Safety Equipments
Machine Safety Product
Locating a Safety Product
EZ-SCREEN (Light Curtain)
EZ-SCREEN® - Point 1 Beam
RANGE
– 0.8-20 m
– 15-70 m
EZ-SCREEN® - Grids 2,3,4 Beam
RANGE
– 0.8-20 m
– 15-70 m
EZ-SCREEN® – Type 4
Two Resolutions
14 mm models 0.1 m to 6 m (4" to 20')
30 mm models 0.1 m to 18 m (4" to 60')
Lengths150 mm to 1800 mm
Response Times30 mm models = 9 ms to 32 ms 14 mm models = 11 ms to 56 ms
EZ-SCREEN® Type 2
Type 2 is NOT “half-as-safe” as a Type 4, but:
EZ-SCREEN® Type 2
“Type 2” versus “Type 4”
Type 4 CommentsType 2
Two microprocessorsTwo Safety Outputs
± 2.5° EAA
Faults detected byself-TEST
Maintains response time or issues stop
command
Less redundancyOne microprocessorTwo Safety Outputs
± 5.0° EAA
Faults detected byself-TEST or byexternal TEST
Periodic external TEST may be needed
to maintain safety
Less resistance to faults and maintain the safety function
Low to moderate riskapplications further
reduce the possibility of harm
> chance of Optical Short Circuits
EZ-SCREEN® Family
AG4 Safety Laser Scanner
ConveyorConveyorRobot Base
Monitored Area
(Yellow)
Protective Field(Red) Warning
Field(Green)AG4
Entry
AG4 Safety Laser Scanner
Protective and Warning Fields – Field Pairs
Material transfer (robot) cell
Area behind robot requires additional
safeguarding (example, fencing,
hard guarding, presence sensing device)
AG4 Safety Laser Scanner
Protective and Warning Fields – Field Pairs
Material transfer (robot) cell
Display of AG4soft program
Installation Considerations
AG4 Safety Laser Scanner
At a minimum, a risk assessment must address: Unmonitored Areas
– Behind and to the sides of the scanner– "Shadowing" within the Protective Field– Needle-shaped and cone-shaped contours
Adjacent Scanners– Could add 40 ms to
response time
Application Examples
AG4 Application Overview
Two-Hand Control
Diverse redundant and self-checking
– Dual microcontrollers
– Multiple optical paths The patented diverse-redundant,
self-checking design will detect an internal safety-critical circuit fault and immediately switch its outputs to the OFF state.
Self-Checking Optical Touch Button
STB Design
Patented Multiple Optical Paths
Self-Checking Optical Touch Button
Self-Checking Optical Touch Button
Patented Multiple Optical Paths
PrimaryEmitter
SecondaryEmitter
SecondaryReceiver
PrimaryReceiver
The secondary circuit ensures that a failure in the primary is detected while a finger is present.
QUESTIONS?
Safety Interlock Switch
Safety Interlock Switchs
Safety Limit Switch
Plastic type
Metal type
Metal type Locking Style
Safety Interlock Switchs
Magnet Style
Hinge Style
Emergency Stop Devices
Rope Pull Switchs
Latch Trip
Rope Pull Switchs 6m
Rope Pull Switchs 6-75m
Rope Pull Switchs 50+50m
Summary
Application Overview
Multiple scanners eliminate unmonitored areas and preventing reset of the interlock gate circuit.
Area Guarding – Interior Cell Monitoring
Application Overview
Two hand control & EZ-screen