Machine options - tornos.com · Machine options Description Description Adaptation for collet F30...

Machine optionsEvoDECO

EvoDECO 10 EvoDECO 16 EvoDECO 20 EvoDECO 32

505-0210


510-0210


510-0250


510-0268


505-0920

505-4020


505-4035


505-0930

505-4030


505-0925

505-4025

Options Machine2 3Options Machine

Machine options

Description

Guide bush holder for non-rotating guide bush, draw type Ø 10 mm

Guide bush holder for non-rotating, adjustable, drawn guide bushes collet including lubricating device. Max. capacity Ø 16 mm, collet o.d. 24 mm

Guide bush holder for for Habegger roller guide bushes including lubricating device. Max. capacity diam. 16 mm.

Guide bush holder for roller guide bushes Habegger

Adaptation for F10 (no. 76-86) collet. Max capacity : Ø 7 mm

Description



Watch industry/collet sleeve high precision paired and balanced sleeve for adaptation of a F10 collet (no. 76-86). Max capacity : Ø 7 mm


505-4040


505-4045


510-0937

510-4020


510-0938

510-4025


510-0939

510-4030


244-0920 245-0920

244-4020 245-4020


510-0941

510-4015


510-0940

510-4010


Machine options

Description Description



Adaptation for collets F13 (no. 76-357)




Adaptation for collet F25 (no.76-64) (max. capacity : 20 mm)



244-0930 245-0930

244-4030 245-4030


245-4035

245-0935


505-1002


505-1010


505-1011


505-1120


505-1100


505-1016


Machine options


Adaptation for collet F30 (no. 76-101) (max. capacity : 25.4 mm)

Adaptation for collet F37 (no. 76-740) (max. capacity : 32 mm)

Presettable turning tool holder long type, section 8x8 mm. Bar rotation to the right

Presettable turning tool holder short type, section 8x8 mm. Bar rotation to the left

Presettable turning tool holder long type, section 8x8 mm.Bar rotation to the left

Plate for 3 turning tools section 8x8 mm uses 2 tools position on tool plates 1 and 2. Bar rotation to the right

Removable tool holder with 2 positions for end drillings (small capacity with adaptation for collets B8) (used with machine 8 axes)

Removable tool holder with 2 positions for end drillings (small capacity with adaptation for collets B8) (used with machine 8 axes)


505-1130


505-1132


505-1134


505-1136


505-3100


505-3107


505-3105


505-3105


Machine options


Tool block with 3 bore holes Ø 16 mm including spacer plate 20 mm for stationary end working tools (uses 1,5 tool position on tool plate 1) (not compatible with option machine 10 axes)

Simple collet holder extension Ø 16 mm shank for ER11 type collet

Double collet holder extension Ø 16 mm shank for ER11 type collet

Simple collet holder extension Ø 16 mm shank for B8 type collet

Stationary end drilling spindle for ESX 12 collets (max. clamping capacity 7 mm)

Re-enforced support for stationary spindle (requires 3106 or 3107)

Removable spindle for an ESX 12 collet (used with 3105)

Removable long spindle for a B8 collet (used with 3105)


505-3110


505-3115


505-3117


505-4100


505-4110


510-1002


510-1001


Machine options


Stationary end drilling spindle for a B8 collet (max. clamping capacity 4 mm)

Stationary end drilling spindle for a B8 collet especially made for the watch industry (max. clamping capacity 4 mm)

Additional steady gun drill holder with sleeve and stationary spindle for high pressure drilling up to 120 bars (used wih 5038) (one spindle is already included with option 5038)

Stationary tool holder for counter operation. Including 2 supports with a Ø 20 mm bore for each position. (without collet holder or tools)


Long turning tool holder section 12x12 mm or 1/2 inch. Bar rotation to the right



510-1008


510-1133


510-1142


510-3100


510-3105


510-3112


510-3110


510-3117


Machine options


Plate for 3 turning tools section 12x12 mm (takes up 2 positions)

Tool block with 3 bore holes Ø 20 mm for end operation (mounts on tool plate 2)

Short collet holder extension (total length about 96 mm) 20 mm shank for ESX20 collet (used with 1133)

Tool holder end unit, bore hole 25 mm for adaptation standard proprietary tooling

Tool holder end unit, bore hole 25 mm for adaptation of arbor with central coolant (used with 5014, 5038 or 5255) (requires 3134)

Additional HP drilling spindle and tool holder 120 bars operation requires 5038 (one spindle is included in option 5038)

Tool holder end unit, bore hole 20 mm for adaptation standard proprietary tooling

Unit with 3 bore holes Ø 16 mm for drilling stationary tools (mounting in OP and COUNTER-OP) (takes up 2 positions)


510-3118


244-1001 245-1001


244-1002 245-1002


244-1003 245-1003


244-1004 245-1004


244-3100 245-3100


244-2900 245-2900


244-1120 245-1120


Machine options


Additional HP drilling spindle and tool holder 340 bars operation requires 5014 (one spindle is included in option 5014)

Presettable turning tool holder low type, section 16x16 mm

Presettable turning tool holder high type, section 16x16 mm

Presettable turning tool holder high type, section 16x16 mmPlate for turning tools with 3 positions

Plate for turning tools with 4 positions

Removable tool holder with 2 bores 16 mm dia for end working operation. Includes mechanical adjustment in depth

Tool holders to clamp the barstock at the bushing when machining long parts (up to 600 mm) with multiple clampings. Includes 2 V type holders to be mounted like standard holders. (Used with option 4902)

Tool holder for end work, with a Ø 20 mm bore for adaptation of standard tooling.


244-3110 245-3110


244-3117


244-3118 245-3118


244-3140 245-3140


505-1600


505-1700


505-1692


505-1610


Machine options


Tool holder for end work, with a Ø 25 mm bore for adaptation of standard tooling

Additional tool holder for a gun drill. Used with the 120 bars high pressure pump, option 5038

Additional tool holder for a gun drill. Used with the 340 bars high pressure pump, option 5014

Tool holder for end work with 3 bores C516 20 mm for adaptation of standard tooling. Max 2 units

Cross drilling/milling/tapping attachment with spindle for collets ESX 12.

Supplementary set of bed plates thickness 2, 3, 5, 10 mm for mechanical offset of tool holders options 1001, 1002 and cross drilling attachment option 1600

3 spindles cross attachment with spindles for ESX12 collet for tool plate system 2. One spindle is offset to allow the mounting of a Ø 30 mm max. cutter (takes up 2.5 tool positions)

Radial polygon milling attachment. Maximum RPM : 16,000 (mounts on tool plate 2) (requires oilmist extraction device)


505-1720


505-1755


505-1770


505-1785


505-1795


505-1910


505-1900


505-3600


Machine options


Radial polygon milling attachment. Maximum RPM : 16,000 (mounts on tool plate 2) (requires oilmist extraction device)Milling attachment “Watch industry” for barrel arbor includes milling arbor Ø 5 H5. It can be used only in main operation (milling cutter Ø: min. 6 mm, max 15 mm)

Gear hobbing attachment in main operation for “Straight tangential hobbing” with single angling of ± 5º (in Z) with module from 0,04 to 0,3 mm. Mounting in T1204 Includes : 1 hobbing attachment, 2 milling arbors Ø 3,5 + Ø 4,5 mm, 1 set up arbor (requires 1795) (recommend 0210 and 5230)

Gear hobbing attachment in main operation for “Frontal hobbing” with single angling of ± 5º (in Y) with module from 0,04 to 0,3 mm. Mounting in T1201 and T1202. Includes : 1 hobbing attachment, 2 milling arbors Ø 3,5 + Ø 4,5 mm, 1 set up arbor (requires 1795) (recommend 0210)

Gear hobbing attachment in main operation for “Frontal hobbing” with double angling of ± 5º (in Z) and - 1º/+ 5º (in Y) with module from 0,04 to 0,3 mm. Mounting in T1204 and T1203. Includes : 1 hobbing attachment 2 milling arbors Ø 3,5 + Ø 4,5 mm, 1 set up arbor (requires 1795) (recommend 0210)

Lubrication device for gear hobbing attachement in main operation and counter operation. (options 1755, 1770, 1785 and 4780) (1 device for max. 2 attachments) (no necessary if already installed on the machine)

External thread whirling attachment with high speed rotation (whirling). Max. setting 15° (Takes up 2 tool positions) (requires 1910, 1920) (requires oilmist extraction device) (recommend 5035)

Milling head and system for the centering of the cutters for max. threading Ø of 6 mm (supplied without cutters)

Rotating end drilling/milling attachment for ESX12 collets (max. clamping capacity 7 mm)


505-3610


505-4600


505-4700


505-4780


510-1600


510-1630


510-1620


510-1640


Machine options


Long rotating end drilling/milling attachment for ESX 12 collets. (max. clamping capacity 7 mm)

Rotating end drilling/milling attachment for collets ESX 12. Includes spindle holder (can be mounted on the 4 positions)

Milling/slotting/and cross drilling attachment with spindle for ESX12 collets. Includes spindle holder. Maximum circular milling cutter : 50 mm dia (can be set at 0° and 90°)

Gear hobbing attachment in counter operation for “Frontal hobbing” with single angling of ± 10º (in Y) with module from 0,04 to 0,3 mm.

Unit with rotating drilling/milling spindle for ESX 20 collet

Unit with rotating drilling/milling spindle for ESX 20 collet. (Milling cutter max. Ø 20 mm)

Unit with rotating milling/slotting spindle for ESX 20 collet (Milling cutter max. Ø 40 mm)

Unit with rotating milling/slotting spindle for ESX 20 collet (Milling cutter max. Ø 63 mm)


510-1692


510-1700


510-1730


510-1900


510-1917


510-3310


510-3300


510-4600


Machine options


3 spindles rotating unit for collet ESX 11 (mounting in main operation and counter operation) (takes up 2 positions)

Radial polygon milling attachment. Max. rotation speed 8,000 RPM

Drilling/milling attachment adjustable from 0° to 90° with a spindle for ER11 collet Max. RPM : 8,000. Max. clamping Ø of a ER11 collet : 7 mm Also used for milling of angled implants in main operation. (takes up 2 positions) (to be mounted on tool plate 2)

External thread whirling attachment with high speed rotation (uses 2 tool positions) (requires 1910 and/or 1917, or 5035) (not compatible with 1133) (requires oilmist extraction device)

Milling head and system for the centering of the blades for max. threading dia. of 5 mm. New version (supplied without blades)

Unit with long rotating drilling/milling spindle for collet ESX 20

Rotating drilling unit with through the spindle coolant. Coolant pressure : up to 120 bars (2000 PSI) Accepts tools with a shank type WELDON Ø 10 mm. Ratio : 1:1.5/max.RPM : 12,000. End working and/or counter operation. Supplied with the mechanical adaptation (requires 5038)

Drilling/milling attachment adjustable from 0° to 90° with a spindle for ER 11 collet. Max. RPM : 8,000. Max. clamping Ø 7 mm (collet ER 11). Also used for the milling of the angled dental implants in counter operation (requires 4610)


510-4605


510-4610


510-4620


244-1505 245-1505


244-1600 245-1600


244-1670 245-1670


244-1650 245-1650


244-1692 245-1692


Machine options


Double drilling/milling attachment adjustable from ± 30° with a spindle for ER11 collet includes support. Max. RPM : 8,000. Max. clamping Ø of a ER11 collet : 7 mm. Also used for milling of angled implants in counter-operation. (takes up 3 positions)

Hardware needed for the machining of the angled dental implants in counter operation

Toolholder with 3 bores Ø 8 mm to receive end working tools (extension) (supplied without extension) (used mainly when machining complex angled implants)

Motorization for rotating tool on the front tool platen. Max. RPM : 5,000. Max number rotating att. 2 units type 1600

Rotating drilling/milling attachment with a spindle for ER 25 collet. (max of circular saw : 50 mm (2.00”)

Rotating drilling/milling attachment with a spindle for ER 25 collet. (max of circular saw : 63 mm (2.50”)

3 spindles rotating attachment with spindles for ER 11 collet. Ratio : 1:1.5 (16 teeth pulley) Max clamping capacity of an ER 11 : 7 mm. Max RPM : 10,000 wit S2 and 9,000 t/min. with S6 (takes up 2 positions)

Rotating drilling/milling attachment, mid length, with a spindle for ER/ESX 25 collet. Ratio 1:1


244-1695 245-1695


244-1696 245-1696


244-1700 245-1700


510-1710 244-1710 245-1710


244-1730 245-1730


244-1900 245-1900


244-1800 245-1800


510-1910 244-1910 245-1910


Machine options


Rotating drilling/milling attachment, mid length, with a spindle for ER/ESX 25 collet. Ratio 1:1

Guide support for heavy duty drilling/milling attachment

Radial polygon milling attachment. Max RPM : 8,000

Insert type polygon cutter type BIMU 320R Diameter : 80 mm with a bore of 16 mm. Accepts max 4 inserts. (Inserts not included)

Drilling/milling attachment with a spindle for ER11/ESX12 with adjustment from 0° to 90°. Max. RPM : 8,000. Max clamping capacity of an ER 11:7 mm. Used in Main operation (takes up 2 positions)

Gear hobbing attachment for straight profile gears. Angular adjustment : +/- 10 degrees. Max. RPM : 8,000

External thread whirling attachment with high speed rotation (whirling head not included) (takes up 2 positions)

Thread whirling head and centering device for the cutters. (cutters are not included)


244-3300 245-3300


244-3305 245-3305


244-3350 245-3350


244-4600 245-4600


244-4650 245-4650


505-2000 510-2000


244-4655 245-4655


505-2010


Machine options


Rotating drilling/milling spindle, long type, with a spindle for ESX25 collet. (Max. cutter Ø 50 mm)

Rotating drilling/milling spindle, long type, with a spindle for quick change system (supplied with 1 standard holder type BMRC 20 for ESX16 collet) (used in counter operation)

Rotating spindle for differential tapping or threading with a spindle for ESX 16

Adjustable angle drilling attachment with setting every 15 degrees. 0-90 degrees, with spindle for ER 11 collet. Max RPM : 8,000 (ratio 1:1)

External thread whirling attachment with high speed rotation for the counter operation (takes up 2 positions) (Requires 4655) (cannot be used with water soluble) (Not compatible with 4902)

Thread whirling head and centering device for the cutters. Max thread Ø 15 mm. Min thread Ø 8 mm and radial cutting depth of 3 mm (sold without cutting tools)

High frequency spindle Ø 22 mm, 60,000 RPM

Axial support for a Ø 22 mm HF spindle. Possible to mount on platen 1 or 2 (used with option 2000)


505-2100 510-2100


505-2110


505-2120


505-2130


505-2200 510-2200


510-2010


505-2210 510-2210


510-2110


Machine options


High frequency spindle, Ø 25 mm, 60,000 RPM

Transversal support for a Ø 25 mm HF spindle. Possible to mount on platen 1 or 2 (used with 2100)

Axial support for a Ø 25 mm HF spindle. Can be mounted on the end work attachment (used with 2100)

Axial support for a Ø 25 mm HF spindle. Can be mounted in counter operation (counter operation) (used with 2100)

Frequency converter for Ø 22 mm and/or Ø 25 mm HF spindle including connecting cable with 9 poles plug. (used with 2000 and/or 2100) (max. 4 converters)

HF spindle Ø 22 and/or Ø 25 adaptation. Including : Air conditioning unit with support and pneumatic connections (used with 2000 and/or 2100) (max. 1 per machine)

Axial support for a Ø 22 mm HF spindle. Possible to mount on platen 1 or 2 (used with option 2000)

Transversal support for a Ø 25 mm HF spindle. Possible to mount on platen 1 or 2 (used with 2100)


510-2120

510-2130


244-2300 245-2300


505-5900 510-5911 244-5911 245-5911

505-5911 510-5912 244-5912 245-5912

505-5912


244-2305 245-2305


244-2310 245-2310


505-5120 510-5120 244-5120 245-5120


505-5125 510-5125 244-5125 245-5125


505-5215


Machine options


Axial support for a Ø 25 mm HF spindle. Can be mounted on the end work attachment (used with 2100)

Drilling/milling HF spindle, Ø 25 mm, 9 poles. Type HF 25 S 50 C for light machining. Max RPM : 80,000 Includes a high frequency converter and a clean compressed air supply kit.

Adaptation of the presetter provided for EvoDECO 16, EvoDECO 20 and EvoDECO 32a for the presetting of tool holders EvoDECO 10 (includes 2 fixing plates for tool holders DECO 7/10a) (valid for presetter type 1996-2002 only)

Receptacle for frequency converter possible to mount 2 converters in 1 receptacle. (Used with 2300) (ex-works)

Support Ø 25 mm for HF drilling/milling spindle. Used in any positions (used with 2300)

Sensor for the checking of tool breakage type mini-detector including : swing sensor type mini-detector electrical interface pneumatic control equipment (control end tools) (maxi 3 sensors)

Work lamp with a magnetic base (used in the work area) (12 Vac and 24 Vac plug in the outside)

Vacuum type part separator includes interface. Can be used at the bushing or at the counter spindle for max. part size : Ø 3 mm, length 6 mm. (Ex-works)


505-5230


244-5272 245-5272


510-5270


510-5001 244-5001 245-5001 EvoDECO 10 EvoDECO 16 EvoDECO 20 EvoDECO 32

244-4104 245-4104


244-4105 245-4105


244-4110 245-4110


244-4111 245-4111


Machine options


Specific customer function including : 4 inputs and 4 outputs, terminal holder for connection, software and operating manual

Parts conveyor belt (delivered without receptacle)

Part conveyor instead of the standard pan (supplied without the part recovery basket)

Pneumatic parts separator at the bushing (mounts only on the front gang slide 1) (Ex-works)

Rotating part extractor with adjustable pneumatic ejector. Includes cleaning of the collet and counter spindle with oil (travel of 150 mm)

Pneumatic part ejector (100 mm travel)

Parts recovery basket max part length : 100 mm

Parts recovery basket max part length : 135 mm


505-5038 510-5038 244-5038 245-5038


505-5035 510-5035 244-5035 245-5014

244-5014 245-5035


244-4902 245-4902


244-4112 245-4112


244-5014 245-5014


505-5462 510-5462 244-5462 245-5464

510-5464 244-5464


244-5462 245-5462


505-5483 510-5483 244-5483 245-5483


Machine options


Parts recovery basketMax part length : 180 mm

Parts extraction, evacuation (through the C’spindle). ***An recovery system for long parts (max. 700 mm).Pneumatic part ejector. Evacuation of the part is through the counter spindle. Recovery of the parts is outside themachine (not compatible with 4650)

Deep drilling system HP -60 -l. with pressure up to 60 bars unit is independent from the machine and mounted on a base with casters. Max pressure : 60 bars. Max output : 30 l/min. Pressure and output can be manually adjusted. Min drilling diameter : 3.0 mm. Compatible with thread whirling heads with up 12 cutters. 4 independent outputs con-trolled by M codes. Coolant tank : 150 liters. 1 pre-filter at 0.15 mm and an exit filter at 0.010 mm. Return pump. Check of coolant level (requires 5020). (5462, 5436 or 5438 recommended). (not compatible with 5038)

Deep drilling system HP 120 -II with pressure up to 120 bars unit is independent from the machine and mounted on a base with casters. Can be installed under a SBF-216 or a SBF-532. Max output pressure : 120 bars. Max output : 25 l/min. Self adjustable flow and pressure. Min drill-ing diameter : 2.0 mm. Max. drilling diameter : 12.0 mm.4 independent outputs controlled by M codes. Coolant tank : 220 liters. 2 pre-filters at 0.15 mm and an exit filter at 0.010 mm. Return pump. Sight level control (requires 5020). (5462, 5436 or 5438 recommended)

Deep drilling system high pressure 340 bars. Max pressure : 340 bars Unit is independent from the machine and mounted on a base with casters. Coolant tank capacity : 80 liters, 4 independent outputs, pre-filter of 0.15 mm and exit filter of 0.025 mm, return pump, coolant level check, adaptable flow and pressure (see indicative table), min. drilling Ø 0.8 mm, max. drilling Ø 3.0 mm (requires 5020) (5462 recommended)

Cutting oil regulator, max. working temperature = 40° C. Cooling power of 3.6 kW for an ambient temperature of 32° C. Power supply : 400 V - 3 - 50 Hz/460 V - 3 - 60 Hz. Refrigerant fluid R407C (CFC free) (requires 5020)

Cutting oil regulator, 7.4 kW. Max. working temperature : 40° C. Cooling power : 7.4 kW in an ambient temperature of 32° C. Power supply : 400 V - 3 - 50 Hz/460 V - 3 - 60 Hz. Refrigerant fluid : R407C (CFC free), (requires 5020)

Automatic fire fighting device type KRAFT & BAUER/FB703


244-5500 245-5500


510-5500


505-5500


244-5422 245-5422


244-5436 245-5436


244-5440 245-5440


505-6512 510-5436


505-6514 510-5438


Machine options


Longitudinal chip conveyor with scrapers for any type of chips type IND’ASS (Requires 5300). Incompatible with short shavings stainless steel/titanium

Plate for oil recovery under the machine



Oilmist extractor with mechanical filter. Filtering capacity : 1,500 m3/h. Advised for general use (i.e. 1x 15 bars high pressure pump and a HF spindle) Centrifugal aspiration box with post filter media class H13 (efficiency at 99.97 %). (not compatible with 5438 and/or 5440) (ex -works)

Device for hooking up a centralized oilmist extractor. Flange dimension : Internal Ø 160, External Ø: 164 Requires a centralize air flow of 1,500 m3/h. Mechanical interface machine/aspiration Cover plate for upper opening of protection (not compatible with 5436 and/or 5438) (Ex -works)

Oilmist extraction device 500 m3/h, mechanic filter (includes motor with brake) (adapted for 50/60 Hz networks) (not compatible with 5438 and/or 5440) (factory mounted)

Oilmist extraction device 500 m3/h, electrostatic filter (includes motor with brake) (adapted for 50/60 Hz networks) (not compatible with 5436 and/or 5440) (factory mounted)

We keep you turning

Edit

ion

Mai

20

18 –

© T

orno

s 20

18, A

ll rig

hts

rese

rved

cm

TornosTORNOS SA throughout the worldRue Industrielle 111 CH-2740 MoutierPhone +41 (0)32 494 44 44Fax +41 (0)32 494 44 [email protected]

Conforms to the European CE / CEM Safety StandardsThis document is based on information available at the time of publication. While every effort has been made to be accurate, the information contained herein does not purport to cover all details or variations in hardware and software, nor to provide for every pos-sible contingency in connection with installation, operation and maintenance. TORNOS SA assumes no obligation of notice to holders of this document with respect to changes sub-sequently made. TORNOS SA makes no representation or warranty, expressed, implied, or statutory with respect to, and assumes no responsibility for the accuracy, completeness, sufficiency or usefulness of the information contained herein. No warranties of merchant-ability nor fitness for purpose shall apply.tornos.com

Machine options - tornos.com · Machine options Description Description Adaptation for collet F30...

Documents

Transcript of Machine options - tornos.com · Machine options Description Description Adaptation for collet F30...