Machine - greub-stock.comgreub-stock.com/updf/ fileMachine Inventory N° Description Brand Model...
8
HD pictures and videos on request. All data such as technical specifications, weight, dimensions, illustrations are indicative and subject to change without notice. Greub Machines SA 39, bd des Eplatures CH - 2300 La Chaux-de-Fonds Tél, + 41 32 925 95 40 Fax +41 32 925 95 45 TVA: CHE-107.032.881 Site : www.greub.ch E-mail : [email protected] Machine Inventory N° Description Brand Model Year Serial No 7252 Cnc turning lathe 350 687 2003 SCHAUBLIN 225 Heading Control Fanuc basic unite Mate 0 Number hours (working process) Number hours (under power) Turning diameter 200 mm Maximum swing over carriage 115 mm Height of centres over carriage 60 mm Maximum swing over bed 200 mm Turning length 400 mm Headstock Spindle speed 5000 t/min With quick clamping 4000 min-1 Spindle motor 4 kW Torque 26 Nm( min-1) Work piece spindle nose camlock D1-3" Spindle hole 32 mm Spindle for « schaublin » collets B32 Maximum bore through chuck 24 mm Maximum throughbore with 3 jaws chuck 27 mm Tailstock Taper size Morse 2 CM Max. drill unit travel 100 mm Carriage Transversal strocke (x axis) 140 mm Ac motor drive 2.9Nm Ball screw, Ø x pitch 20x5 mm Resolution on radius 0.0005 mm Longitudinal stroke, z-axis 400 mm
Transcript of Machine - greub-stock.comgreub-stock.com/updf/ fileMachine Inventory N° Description Brand Model...
HD pictures and videos on request.
All data such as technical specifications, weight, dimensions, illustrations are indicative and subject to change without notice.
Greub Machines SA
39, bd des Eplatures
CH - 2300 La Chaux-de-Fonds
Tél, + 41 32 925 95 40
Fax +41 32 925 95 45
TVA: CHE-107.032.881
Site : www.greub.ch
E-mail : [email protected]
Machine
Inventory N°
Description
Brand
Model
Year
Serial No
7252
Cnc turning lathe
350 687
2003
SCHAUBLIN
225
Heading
Control Fanuc basic uniteMate 0
Number hours (working process)
Number hours (under power)
Turning diameter 200 mm
Maximum swing over carriage 115 mm
Height of centres over carriage 60 mm
Maximum swing over bed 200 mm
Turning length 400 mm
Headstock
Spindle speed 5000 t/min
With quick clamping 4000 min-1
Spindle motor 4 kW
Torque 26 Nm( min-1)
Work piece spindle nose camlock D1-3"
Spindle hole 32 mm
Spindle for « schaublin » collets B32
Maximum bore through chuck 24 mm
Maximum throughbore with 3 jaws chuck 27 mm
Tailstock
Taper size Morse 2 CM
Max. drill unit travel 100 mm
Carriage
Transversal strocke (x axis) 140 mm
Ac motor drive 2.9Nm
Ball screw, Ø x pitch 20x5 mm
Resolution on radius 0.0005 mm
Longitudinal stroke, z-axis 400 mm
HD pictures and videos on request.
All data such as technical specifications, weight, dimensions, illustrations are indicative and subject to change without notice.
Greub Machines SA
39, bd des Eplatures
CH - 2300 La Chaux-de-Fonds
Tél, + 41 32 925 95 40
Fax +41 32 925 95 45
TVA: CHE-107.032.881
Site : www.greub.ch
E-mail : [email protected]
Inventory N° 7252
Ac motor drive 2.9Nm
Resolution on radius 0.001 mm
Feeds
Working feeds, x- and z-axis, stepless 0-5 m/min
Rapid feed, x- and z-axis 10 m/min
Feed power, x-/z-axis 360 daN
Tooling system: linear
Number of radial toolholder (according to Ø of the piece) 2
Number of frontals toolholder (according to Ø of thepiece)
2 - 5
Maximum tool size (multifix system) 16x16 mm
Clamping tools for collets ESX 20
Bar holder Ø 20 mm
Flushing
Tank contenance 55 L
Pump capacity 40 l/min
Pressure 1.7 bar
Control
Rs-232 interface
Interface pcmcia
Iso
Overall dimensions length x height x depht 1480x1490x1200 mm
Netweight 1120 kg
Load floor 700 kg/m2
Pneumatic consumption
Min 4 bar
Max. pressure 6 bar
Average consumption 0.5 m3/h
Connection 380 / 50 V,Hz
Accessories
Tool cabinet 1
Steady 2
Set of jaws 3
Closer for stepped collets 1
Set collet chucks 1
Stepped collets b 32 Ø 110 1
3 jaw chuck 1
HD pictures and videos on request.
All data such as technical specifications, weight, dimensions, illustrations are indicative and subject to change without notice.
Greub Machines SA
39, bd des Eplatures
CH - 2300 La Chaux-de-Fonds
Tél, + 41 32 925 95 40
Fax +41 32 925 95 45
TVA: CHE-107.032.881
Site : www.greub.ch
E-mail : [email protected]
Inventory N° 7252
Set of jaws 6
Rotary tail centre 1
Pictures
HD pictures and videos on request.
All data such as technical specifications, weight, dimensions, illustrations are indicative and subject to change without notice.
Greub Machines SA
39, bd des Eplatures
CH - 2300 La Chaux-de-Fonds
Tél, + 41 32 925 95 40
Fax +41 32 925 95 45
TVA: CHE-107.032.881
Site : www.greub.ch
E-mail : [email protected]
Inventory N° 7252
HD pictures and videos on request.
All data such as technical specifications, weight, dimensions, illustrations are indicative and subject to change without notice.
Greub Machines SA
39, bd des Eplatures
CH - 2300 La Chaux-de-Fonds
Tél, + 41 32 925 95 40
Fax +41 32 925 95 45
TVA: CHE-107.032.881
Site : www.greub.ch
E-mail : [email protected]
Inventory N° 7252
HD pictures and videos on request.
All data such as technical specifications, weight, dimensions, illustrations are indicative and subject to change without notice.
Greub Machines SA
39, bd des Eplatures
CH - 2300 La Chaux-de-Fonds
Tél, + 41 32 925 95 40
Fax +41 32 925 95 45
TVA: CHE-107.032.881
Site : www.greub.ch
E-mail : [email protected]
Inventory N° 7252
HD pictures and videos on request.
All data such as technical specifications, weight, dimensions, illustrations are indicative and subject to change without notice.
Greub Machines SA
39, bd des Eplatures
CH - 2300 La Chaux-de-Fonds
Tél, + 41 32 925 95 40
Fax +41 32 925 95 45
TVA: CHE-107.032.881
Site : www.greub.ch
E-mail : [email protected]
Inventory N° 7252
HD pictures and videos on request.
All data such as technical specifications, weight, dimensions, illustrations are indicative and subject to change without notice.
Greub Machines SA
39, bd des Eplatures
CH - 2300 La Chaux-de-Fonds
Tél, + 41 32 925 95 40
Fax +41 32 925 95 45
TVA: CHE-107.032.881
Site : www.greub.ch
E-mail : [email protected]
Inventory N° 7252
