COATING FEED OPTIOCOATING FEED OPTIOCOATING FEED OPTIOCOATING FEED OPTIONS:NS:NS:NS: Cartridge or Pressure Vessel feed

FACILITIES REQUIREMENTS:FACILITIES REQUIREMENTS:FACILITIES REQUIREMENTS:FACILITIES REQUIREMENTS: System Footprint:

L: 1325 W: 1065 H: 1760 mm

(L: 52.1” W: 41.9” H: 69.2”)

Air Supply: 80 PSI dry, clean air

Extraction: 600 CFM

Power (Mains): 120/220 VAC, 50/60 Hz

System Weight: 450 Kg’s

Standards Compliance: CE

OPTIONAL FEATURES:OPTIONAL FEATURES:OPTIONAL FEATURES:OPTIONAL FEATURES: Low level material sensor

Built-in exhaust fan with air flow indicator

Bar code reader

Viscosity control of fluid

Multiple head configuration

Laser pointer

In situ camera for manual alignment

DESIGNED AND MANUDESIGNED AND MANUDESIGNED AND MANUDESIGNED AND MANUFACTURED IN FACTURED IN FACTURED IN FACTURED IN

THE UNITED KINGDOMTHE UNITED KINGDOMTHE UNITED KINGDOMTHE UNITED KINGDOM

ACR Model 400 ACR Model 400 ACR Model 400 ACR Model 400 Multi Axis Conformal Coating System Multi Axis Conformal Coating System Multi Axis Conformal Coating System Multi Axis Conformal Coating System

SCH reserves the right to make design changes to products to improve their

function. These changes may occur between publishing.

The ACR Multi-Axis Conformal Coating System (MACCS) provides a reliable robotic conformal coating application platform for low, medium and high volume batch and inline conformal coating processing.

Equipped with programmable software and servo motor control, the straightforward design means ease of application and maintenance at all levels of the conformal coating cycle.

MACCS 400 SPECMACCS 400 SPECMACCS 400 SPECMACCS 400 SPECIFICATIONSIFICATIONSIFICATIONSIFICATIONS

MOTION CONTROL:MOTION CONTROL:MOTION CONTROL:MOTION CONTROL: Type: Servo motors, slides on XYZ axes, 560 degree rotation axis

and 20 degree valve tilt mechanism

XYZ Repeatability: 25 microns (0.001”)

XYZ Resolution: 25 microns (0.001”)

X-Y Velocity: up to 800 mm/s (32”/s) max

COATING ACOATING ACOATING ACOATING AREA: REA: REA: REA: XYZ travel: 500mm x 480mm x 90mm (19.6” x 18.9” x 3.5”)

PCB HANDLING:PCB HANDLING:PCB HANDLING:PCB HANDLING: BATCH

PCB Fixture: 500mm x 480mm x 90mm (19.6” x 18.9” x 3.5”)

INLINE

PCB/pallet size:500mm x 480mm x 90mm (19.6”x 18.9”x 3.5”)

Conveyor Type: Chain

Min Conveyor Width: 50mm (1.97”)

Max Conveyor Width: 480 mm (18”)

Edge Clearance: 4.7mm (0.185”)

Transport Height: 940mm - 965mm (37” – 38”)

Communication: SMEMA

STANDARD FEATURES:STANDARD FEATURES:STANDARD FEATURES:STANDARD FEATURES: Front toughened glass for ease of viewing and maintenance

Door Interlock controls for safety

Purge and solvent cups for flushing

Coating software, XP based, On-Board PC

Remote teach pendant

Internal UV and white light

FLUID DELIVERY METHOD:FLUID DELIVERY METHOD:FLUID DELIVERY METHOD:FLUID DELIVERY METHOD: Standard Options:

1. Dual Atomised Spray & Needle Valve

2. Non-Atomised Film Coating Valve

SCH Technologies Ltd • Newburgh Building, McLinctock Way, Barnsley, South Yorkshire S70 6BF • UK Tel: +44(1226) 249 019 Fax: +44 (0) 1226 770 809 www.conformalcoating.co.uk