Macalloy CHS Fork End - CMD Group CHS Fork End... · Macalloy CHS Fork End Apr 13 The Macalloy CHS...
Transcript of Macalloy CHS Fork End - CMD Group CHS Fork End... · Macalloy CHS Fork End Apr 13 The Macalloy CHS...
Macalloy CHS Fork End
Apr 13
The Macalloy CHS Fork End can save time and cost compared to laser cutting and
welding T-piece connections.
The Macalloy CHS Fork End provides an
architectural, cost effective, alternative to
standard industry solutions for securing circular
hollow sections (CHS).
• Simple installation — fork end that can be welded
directly to a CHS with full penetration butt weld
• Cost and time savings compared to current CHS
fixing solutions
• Same profile as forks used on Macalloy tension
bars, stainless cables and adjustable
compression struts
• Can be supplied with standard Macalloy
architectural pin
• Common sizes available from stock, details
shown below
• Custom sizes and custom sizes including
different wall thicknesses available to order. See
over for details
• Can be galvanised and/or painted for corrosion
protection
For further information please contact your Macalloy
sales representative or contact Macalloy direct on
+44 1909 519200 or [email protected]
CHS Fork End welded to CHS, painted and with pin
Stock Sizes
macalloy.com
Material is minimum 54,300 psi yield strength with max CEV of 0.55%.
Standard sizes available for special order
Non standard sizes available to special order. Please contact Macalloy for details.
Component Dimensions
macalloy.com