Mac 1000 Hr Maintenance
-
Upload
viijaay-nehra -
Category
Documents
-
view
214 -
download
0
Transcript of Mac 1000 Hr Maintenance
-
8/19/2019 Mac 1000 Hr Maintenance
1/3
MAC Replace lubricating oil and lub. oil flter.
2. Remove the valves rom both cylinders. Check or carbon deposits.
Dismantle the valve or cleaning & repair i necessary. se spare part kit no.
!"2"M#2$ !"2%M#2$ !"'M#2 and !"%2M#2 to overhaul valves.
All valve gaskets should be replaced (ith ne( parts at assembly.
!. )nspect the *e+ible coupling bet(een compressor and motor.
. Check all bolts and nuts or proper tightness. Also check vibration dampers and
hose connections i the unit is *e+ibly mounted.
Check that no oil has come in contact (ith the rubber elements in the vibration
dampers.
,. )nspect cylinder suraces through valve apertures.
-. unction/test the saety valve. 0tart the compressor$ and slo(ly close the stop
valve on the compressed air line.
1he air pressure should not e+ceed ma+. orking pressure 3 %"4. 1he saety
valves are sealed and the setting should not be ad5usted.
) the valves are malunctioning or open at (rong pressure$ the saety valves
should be replaced.
6. )nspect all pipe connections 7compressor running8.
9. Check that all automatic e:uipment is unctioning properly.
'. Clean air flter.
1;
-
8/19/2019 Mac 1000 Hr Maintenance
2/3
2. Remove the valves rom both cylinders. Check or carbon deposits. ;verhaul
valves. se spare part kit no. !"!9M#2 and !"!,M#2 to overhaul valves. All valve
gaskets should be replaced (ith ne( parts at assembly.
!. )nspect the *e+ible coupling bet(een compressor and motor.
. Check all bolts and nuts or proper tightness. Also check vibration dampers and
hose connections i the unit is *e+ibly mounted.
Check that no oil has come in contact (ith the rubber elements in the vibration
dampers.
,. unction/test the saety valve. 0tart the compressor$ and slo(ly close the stop
valve on the compressed air line.
1he air pressure should not e+ceed ma+. (orking pressure 3 %"4. 1he saety
valves are sealed and the setting should not be ad5usted.
) the valves are malunctining or open at (rong pressure$ the saety valves
should be replaced.
-. Check all pipe connections 7compressor running8.
6. Check that all automatic e:uipment is unctioning correctly.
9. Clean suction air flter.
0@R)C@ A)R C;M
-
8/19/2019 Mac 1000 Hr Maintenance
3/3
%,"" BR0
Reer Manual section -.2
Change oil.
Change oil flter cartridge
Clean cooler.
Check operation o saety valve
Check condition o hoses.
Check drive belt tension