m3 - NAUE Steel P
-
Upload
oanaariadna -
Category
Documents
-
view
5 -
download
1
description
Transcript of m3 - NAUE Steel P
![Page 1: m3 - NAUE Steel P](https://reader038.fdocuments.in/reader038/viewer/2022110204/563dba6e550346aa9aa58fd3/html5/thumbnails/1.jpg)
NAU
E ST
EEL
P
NAUE m³SECUGRID® REINFORCED
SLOPE AND RETAINING WALL SYSTEMS
![Page 2: m3 - NAUE Steel P](https://reader038.fdocuments.in/reader038/viewer/2022110204/563dba6e550346aa9aa58fd3/html5/thumbnails/2.jpg)
NAUE STEEL PDESCRIPTION
The NAUE STEEL P system combines Secu-grid® geogrid reinforcement with long-term (permanent) steel-skin facings tocreate reinforced earth structures amen-able to numerous slope shapes. Vegetationis allowed on slopes up to 70°. For stee-per slopes on which vegetation is desired,special plantings and irrigation are neces-sary. For NAUE STEEL P, the Secugrid® pri-mary reinforcement is fastened to the steelshells (e.g., L-shaped wire forms) to createa strong interface. To prevent soil erosionalong the galvanized steel facing, Secu-tex® nonwoven filter geotextiles or Secu-mat® erosion control mats are used. Thesystem is highly adaptable to project-spe-cific requirements and geometries, resul-ting in economical solutions supportingnatural vegetation.
Applications:- Landslide and slope restoration- Slope reinforcement of
gradients up to 90°- Vegetated slopes with gradients
between 45° and 70° - Embankment constructions- Road and rail noise barriers
System Components:- Secugrid® PET geogrid
reinforcement - Secumat® erosion control
mat and/or nonwoven Secu-tex® filter geotextile
- Fasteers- Hydroseeding- Galvanized steel facings
NAUE Secugrid® GeogridsSecugrid® geogrids are produced with anew dimension of manufacturing tech-nology. The reinforcement element is ahighly-oriented flat bar that is uniformlyextruded and drawn, ensuring a conti-nuous homogeneous molecular structure,to achieve a high modulus and highstrength at low elongations. The long-itudinal and transverse reinforcement bars are firmly joined with the NAUE-
patented welding technology to pro-vide a structurally sound and stable geo-grid for reinforcement applications. Secugrid® is used for base reinforcement,mechanically stabilised earth (MSE) wallconstruction including veneer stabilisa-tion, the segmental retaining wall (SRW) market, embankment reinforce-ment, load transfer platforms over pilecaps, sinkhole coverage, construction onsoft soils and other soil reinforcement applications.
![Page 3: m3 - NAUE Steel P](https://reader038.fdocuments.in/reader038/viewer/2022110204/563dba6e550346aa9aa58fd3/html5/thumbnails/3.jpg)
Advantages:- Permanent stability even on slopes up to 90°- Green solution- High load capacity- Variable spacers allow site-specific slope face adjustment- Quick and easy construction- Site soils (including cohesive soils) can be used
- Extremely economical, due to the ability to utilise more-afford-able cohesive soils rather than dispose of or replace them withnon-cohesive soils
- Secugrid® geogrids can be used with cement- and lime-stabilized soils
- Ecological benefits associated with the use of local soils include decreased transportation pollution (and cost) and conservation of natural resources
![Page 4: m3 - NAUE Steel P](https://reader038.fdocuments.in/reader038/viewer/2022110204/563dba6e550346aa9aa58fd3/html5/thumbnails/4.jpg)
The information contained herein is to the best of our knowledge, true and accurate. There is no implied or expressed warranty.© 2011 by NAUE GmbH & Co. KG, Espelkamp-Fiestel, Germany · All rights reserved. · No. 167 · Status 10.02.2011
®
, Secugrid®, Secutex® and Secumat® are registered trademarks of NAUE GmbH & Co. KG.
NAUE GmbH & Co. KGGewerbestrasse 232339 Espelkamp-FiestelGermany
Phone +49 5743 41-0Fax +49 5743 41-240E-Mail [email protected] www.naue.com
Memberships of the NAUE Group
Member
Member
Member Member
Member MemberMember Member
Member
Member
Member Member MemberMember
Member Member Member
Member
Member
Secugrid® Q6 and R6Bentofix® BFG 5000
NAUE Group approvals / certifications
Member