PRESSURE VS TEMPERATURE PACKING RATING COLOR CODED OPTIONS

PTFE

6K / 10K PSI

GRAPHOIL

I.T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES WITHOUT NOTICE.

www.ite-srl.comDWG NAME: NEEDLE.dft - REV.: - DATE: 16/04/2018 - I .T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES W ITHOUT NOTICE.

Standard Valve - Pressure rating up to 10,000 psig

STANDARD VALVE

MODEL:

NEEDLE

LIST OF MATERIAL

POS DESCRIPTION AISI 316L A105 LF2 F51 F55 ALLOY 400 ALLOY C276 ALLOY A625 6MO

1 BODY BONNET M18x1 AISI 316L A105 A350 LF2 F51 F55 A400 C276 A625 6MO

2 GLAND PACKING PTFE - - - - - - - -

3 THRUST BUSH AISI 316L - - - - - - - -

4 NEEDLE AISI 316L AISI 316L AISI 316L F51 F55 A400 C276 A625 6MO

5 STEM AISI 316L - - - - - - - -

6 GLAND PACKING ADJUSTER AISI 303 - - - - - - - -

7 GLAND ADJUSTER LOCK NUT AISI 303 - - - - - - - -

8 DUST CUP HYTREL BLU - - - - - - - -

9 T HANDLE 50mm AISI 303 - - - - - - - -

10 PIN 4X12 - ISO 8741 A2 - - - - - - - -

11 NO HEAD SCREW M6x10 - 45H - DIN 915 A2 - - - - - - - -

9

8

6

7

11

10

5

1

3

2

4

Equalise

Vent/test

Isolate

Locking Plate Anti-Tamper Head Anti-Tamper Headwith padlock

FEATURES

1 Metal to Metal Seal to Valve Body.

2Adjustable packing installed below operating threads to preventmedium contamination or lubrificant washout of operatingthreads.

3 Metal to Metal secondary needle seal.

4Non-rotating lower stem for smooth operation and minimumwear of sealing elements. The lower stem is antiblow-out/non-removable for your safety.

5Stem with cold rolled threads for high strength and smoothoperation. Stem incorporated back stop design.

6 Gland packing adjuster with easy acces.

7 Gland adjuster lock nut for vibration protection.

8Close dust cup for operating thread protection and providingcolour coded functional identification

9Operating handle for low torque function. Operating options areAnti-Tamper or lcoking device features. Standard lenght forapplication up to 6.000 psi are 50mm.

10 Eliminates unauthorized removal of the bonnet.

www.ite-srl.comDWG NAME: LADM20.001.dft - REV.: - DATE: 10/07/2017 - I .T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES W ITHOUT NOTICE.

This manifold are designed for mounting to Pressure Gaueges, PressureTransmitters or Pressure Switches. Composed of primary block valve

and secondary valve for instrument venting or calibrating.

REMOTE MOUNTED MANIFOLD

MODEL:

MODEL SELECTION

MODEL RATING MATERIAL PACKING IN OUT VENT CODE WEIGHT NOTE

M20

6K psi

AISI 316L

PTFE 1/2" NPT-F 1/2" NPT-F 1/4" NPT-F

M20-06ST8N8N4

0,9 Kg

ASTM A105 M20-06AT8N8N4

F51 M20-06DT8N8N4

F55 M20-06ET8N8N4

ALLOY 400 M20-06FT8N8N4

C276 M20-06GT8N8N4

6MO M20-06HT8N8N4

I625 M20-06IT8N8N4

10K psi

AISI 316L M20-10ST8N8N4

ASTM A105 M20-10AT8N8N4

F51 M20-10DT8N8N4

F55 M20-10ET8N8N4

ALLOY 400 M20-10FT8N8N4

C276 M20-10GT8N8N4

6MO M20-10HT8N8N4

I625 M20-10IT8N8N4

I.T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES WITHOUT NOTICE.

M20

Packing material PTFE as standardmax temperature 180 °C.

The dimensions shown apply onlyto the illustrated valve – if you needthe dimensions for your individual

type or should you still not find youroptions at all please contact the

factory.

60

30

169

O7

2x

35

47

IN

OUT

DRAIN

www.ite-srl.comDWG NAME: LADM20.020.dft - REV.: - DATE: 10/07/2017 - I .T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES W ITHOUT NOTICE.

This manifold are designed for mounting to Pressure Gaueges, PressureTransmitters or Pressure Switches. Composed of primary block valve

and secondary valve for instrument venting or calibrating.

REMOTE MOUNTED MANIFOLD

MODEL:

MODEL SELECTION

MODEL RATING MATERIAL PACKING IN OUT VENT CODE WEIGHT NOTE

M20

6K psi

AISI 316L

PTFE 3/4" NPT-F 3/4" NPT-F 1/4" NPT-F

M20-06ST12N12N4

1,4 Kg

ASTM A105 M20-06AT12N12N4

F51 M20-06DT12N12N4

F55 M20-06ET12N12N4

ALLOY 400 M20-06FT12N12N4

C276 M20-06GT12N12N4

6MO M20-06HT12N12N4

I625 M20-06IT12N12N4

10K psi

AISI 316L M20-10ST12N12N4

ASTM A105 M20-10AT12N12N4

F51 M20-10DT12N12N4

F55 M20-10ET12N12N4

ALLOY 400 M20-10FT12N12N4

C276 M20-10GT12N12N4

6MO M20-10HT12N12N4

I625 M20-10IT12N12N4

I.T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES WITHOUT NOTICE.

M20

Packing material PTFE as standardmax temperature 180 °C.

The dimensions shown apply onlyto the illustrated valve – if you needthe dimensions for your individual

type or should you still not find youroptions at all please contact the

factory.

70

40

179

O7

2x

35

47

IN

OUT

DRAIN

REMOTE MANIFOLD - CODIFICA 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

ESEMPIO: M 2 0 - 0 6 S T 8 N 8 N 4

M20 REMOTE MANIFOLD 2 VLV 50x30 I/O 180°

06 Serie 600010 Serie 10000

S Aisi 316LA A105D F51E F55F Monel 400G C276 HastelloyH 6 Mo/F44I Inconel 625

T TeflonG Graphoil

4 1/4"6 3/8"8 1/2"

12 3/4"20 M20 x 1,5

N NPTI BSPP GAS (ISO 1179)K BSPT R/RC (ISO 7)B Butt weldS Socket WeldM Metrico

4 1/4"6 3/8"8 1/2"

12 3/4"20 M20 x 1,5

THREAD (Same as "IN" standard)N NPTI BSPP GAS (ISO 1179)K BSPT R/RC (ISO 7)B Butt weldS Socket WeldM Metrico

/4 1/4 NPT 8 1/2 NPT

OPTIONS/

B All component 316LC Special TestingD Custom markingE T-Bar 316LL Lox cleaningTI Isolate Anti-tamperK Padlock for all anti tamper bonnetT Mounted plug drain

KT Padlock for all T-bar bonnetCR Criogenic Version

OUT (Same as "IN" standard)

DRAIN

MODEL

RATING

MATERIAL

PACKING

IN

THREAD