MULTI-STANDARDPROGRAMMABLEHIGH POWER (*)

CB MOBILE TRANSCEIVERM-550 POWER

MULTI-STANDARD PROGRAMMABLEHIGH POWER CB MOBILE TRANSCEIVER

A new series of state-of-the-art CB (27 MHz) mobile transceivers, withadvanced software and hardware design, specifically conceived for CitizenBand operators and for car & truck drivers. 8 bands programmable multistandard circuit design, matching frequency & operating moderequirements of various countries. The new POWER SERIES family of CBradios is based on a new high power MOSFET transmitter circuit, rated at12W RF maximum (International version) or at 4W RF maximum (Europeanversion). This new and exclusive circuit design makes this radio one ofthe most advanced and sofisticated mobile CB transceiver in the market.One radio only, ready for use in all the European countries !

featurePACKED

see reverse for full details

MULTI-STANDARDPROGRAMMABLE

TECHNOLOGY

MOSFET TRANSMITTER

8BANDS

ANALOGUEMETER

MOSFETTRANSMITTER

ROTARY CHSWITCH ECHO (1)

EMGCH9/19

MICGAIN

RFGAINPANOISE

LIMITERROGERBEEP

QUICK UP/DNLOCKAM/FM

ELECTRETMIC

POWER SERIESM-550POWER

TRANSMITTER MAXIMUMRF OUTPUT POWER (*)RATED AT 4W MAXIMUMFOR EUROPEAN VERSION

MULTI-STANDARD PROGRAMMABLE HIGH POWER CB MOBILE TRANSCEIVER

0678 CH

Main features :

MULTI STANDARD CIRCUIT DESIGN

8 BANDS PROGRAMMABLE

ANALOGUE S/RF METER

RF GAIN CONTROL

MIC GAIN CONTROL

HIGH POWER MOSFET TRANSMITTER

ROGER BEEP TONE

ECHO (WITH OPTIONAL ECHO CARD)

CH9 / CH19

ANL (AUTOMATIC NOISE LIMITER)

PA (PUBLIC ADDRESS)

QUICK UP / QUICK DOWN KEYS

LOCK

HIGH QUALITY MICROPHONEWITH 6-PIN RING CONNECTOR

OPTIONAL DIN SIZE CAR MOUNT

M-550 POWER

RECOMMENDED BY INTEK !

LEADER IN CB 27 MHzCAR & TRUCK MOBILE ANTENNA

State-of-the-art CB (27 MHz) high power mobile transceiver, with advanced software & hardware design, specifically conceived for Citizen Band operators and for truck / car drivers

MULTI-STANDARDPROGRAMMABLE

TECHNOLOGY

One radio only, ready for use in all the European countries !

SPECIFICATIONS

GENERALChannels Refer to programmed bandModes (AM, FM) Refer to programmed bandOperating Temp. -10°/+55°CDC Input Voltage 13.2Vdc ±15%Size 153(L) x 50(H) x 190(D) mmWeight 940 gr.

RECEIVERSystem CPU Controlled Double

Conversion Super Heterodyne

IF 1° 10.695 MHz / 2° 455 KHzSensitivity 0.5µV for 20dB SINAD (FM)

0.5µV for 20dB SINAD (AM)Audio Output Power @10% THD 2.5W at 8 OhmAudio Distorsion <8% at 1 KHzImage Rejection 65dBAdjacent Ch. Rejec. 65dBSignal/Noise Ratio 45dBCurrent Drain 400mA (stand-by)

E. & O. E.

TRANSMITTERSystem CPU Controlled PLL

SynthesizerMax Output Power 4W at 13.2VdcModulation AM (from 85% to 95%)

FM (1.8 KHz ±0.2 KHz)Output Impedanced 50 Ohm unbalancedCurrent Drain 1500 mA (at no modulation)

IMPORTANT ! All radios for the European countries (European version) have been factory pre-programmed onthe CE frequency band 06 (CEPT 40CH FM 4W). This product is subject to national restrictions. Before operatingthe radio, please check that the frequency band has been correctly programmed according to the regulations ofthe country where radio is used. Please read carefully the instruction manual before using this product.

ANALOGUES/RF METERTraditional analoguemeter for precisereading of receivingsignal strenght andtransmitter power.

MICROPHONECONNECTORHigh qualityc o n d e n s e rm i c r o p h o n e ,with channelUP/DN andLock keys.

DISPLAYL E D d i s p l a yshows theselected bandcode and theoperating channelnumber.

MIC GAINMic gain controlto set the desiredmicrophone gain.

CHANNELR o t a r ym e c h a n i c a lchannel switchselects theo p e r a t i n gchannel.

OFF / VOLOFF / Volumecontrol knob.

PA / SQLSquelch control knoband PA (PublicAddress) switch.

ECHOThis key wil lactivate theEcho function (ifthe optionalEcho card isinstalled).

TX LEDRed LEDconfirms iftransceiver isin transmittingmode.

AM / FM MODEIt selects the operatingmode AM/FM (only ifal lowed by theprogrammed band).

CH9 / CH19Three position switchselects the twoemergency channels(CH9 or CH19) or thenormal operatingchannels.

RF GAINRF gain control to set thedesired receiver gain.

ANL LEDGreen LEDconfirms if ANLis active.

R. BEEP LEDGreen LEDconfirms ifRoger Beepfunction isactive.

ECHO LEDGreen LEDconfirms ifEcho functionis active.

ROGER BEEPThis key wil lactivate the RogerBeep tone function.

ANLAutomatic NoiseLimiter reduceselectrical and electro-magnetic interferencesand noise.

RoHS2002/95/EC

MOSFET TRANSMITTER

(*) The transmitter RF output power is factory set at 4.0W RF maximum, for all theradios for the European countries (European version), in accordance with thecurrent CE/R&TTE regulations. The transmitter RF output power is factory set at12.0W RF maximum, for all the radios for other countries (International version).THESE FACTORY SETTINGS CANNOT BE MODIFIED BY THE USER !

MITSUBISHI RF POWER MOS FET RD16HHF1RoHS Compliance, Silicon MOSFET Power Transistor 30MHz, 16W

ECHO-550P (ECHO CARD)Optional ECHO card, can be very easilyinstalled and connected to the main boardthrough a plug-in connector. Electronic ECHOfunction, with adjustable ECHO level andECHO repeat rate.

FREQUENCY BAND / MODE PROGRAM (EUROPEAN VERSION)

01 ITALY 40CH AM / FM 4WSPAIN 40CH AM / FM 4W

02 ITALY 36CH AM / FM 4W03 GERMANY 80CH FM 4W / 12CH AM 1W04 GERMANY 40CH FM 4W / 12CH AM 1W

05 EUROPE 40CH FM 4W / 40CH AM 1WFRANCE 40CH FM 4W / 40CH AM 1W

06 CEPT 40CH FM 4W (DEFAULT)07 ENGLAND 40CH + CEPT 40CH FM 4W08 POLAND 40CH AM / FM 4W (-5 KHz)

ELECTRETMICROPHONEwith UP/DN andLOCK keys

(1) The ECHO function can beenabled only if the optional ECHOcard (model ECHO-550P) has beeninstalled.