m 003927

7/24/2019 m 003927

1/78

Release Notes 06/2014 M003927-06

7/24/2019 m 003927

2/78

2

ManufacturerEaton Automation GmbHSpinnereistrasse 8-14CH-9008 St. GallenSchweizwww.eaton-automation.comwww.eaton.eu

Support

Region North AmericaEaton Corporation

Electrical Sector1111 Superior Ave.Cleveland, OH 44114United States877-ETN-CARE (877-386-2273)www.eaton.com

Other regionsPlease contact your local distributor or send an

e-mail to:[email protected]

Original instructions

English

Redaction

Daniel Lenherr

Brand and product names

All brand and product names are trademarks or registered trademarks of the owner concerned.

Copyright

Eaton Automation GmbH, CH-9008 St. Gallen

All rights reserved, also for the translation.

None of this documents may be reproduced or processed, duplicated or distributed by electronic

systems in any form (print, photocopy, microfilm or any other process) without the written permission

of Eaton Automation GmbH, St. Gallen.

Subject to modifications.
http://www.eaton-automation.com/http://www.eaton.eu/http://www.eaton.eu/http://www.eaton.com/mailto:[email protected]:[email protected]://www.eaton.com/http://www.eaton.eu/http://www.eaton-automation.com/

7/24/2019 m 003927

3/78

3

Contents

1 XSOFT-CODESYS V2.3.9 SP4 .......................................................................................... 51.1

Release information ............................................................................................................ 5

1.2

Features and changes ........................................................................................................ 8

1.3 Documentation .................................................................................................................... 81.4 Known restrictions ............................................................................................................... 81.5 Addressed Defects and Changes ............. ...................... ...................... ..................... ......... 8

2

XSOFT-CODESYS V2.3.9 SP3 (Patch 2) ........................................................................ 13

2.1 Release information .......................................................................................................... 132.2 Version information ........................................................................................................... 142.3

Features and changes ...................................................................................................... 16

2.4

Documentation .................................................................................................................. 16

2.5 Known restrictions ............................................................................................................. 162.6

Addressed Defects and Changes ............. ...................... ...................... ..................... ....... 17

3 XSOFT-CODESYS V2.3.9 SP3 (Patch 1) ........................................................................ 223.1

Release information .......................................................................................................... 22

3.2 Version information ........................................................................................................... 233.3


3.4

Documentation .................................................................................................................. 25

3.5 Known restrictions ............................................................................................................. 253.6 Addressed Defects and Changes ............. ...................... ...................... ..................... ....... 26

4

XSOFT-CODESYS V2.3.9 SP3 ........................................................................................ 304.1


4.2

Version information ........................................................................................................... 31

4.3 Features and changes ...................................................................................................... 334.4 Documentation .................................................................................................................. 334.5

Known restrictions ............................................................................................................. 33

4.6 Addressed Defects and Changes ............. ...................... ...................... ..................... ....... 34

5 XSOFT-CODESYS V2.3.9 SP2 (Patch 1) ........................................................................ 445.1 Release information .......................................................................................................... 445.2


5.3 Features and changes ...................................................................................................... 455.4 Documentation .................................................................................................................. 45

5.5

Known restrictions ............................................................................................................. 465.6 Addressed Defects and Changes ............. ...................... ...................... ..................... ....... 46

6 XSOFT-CODESYS V2.3.9 SP2 ........................................................................................ 486.1 Release information .......................................................................................................... 486.2 Version information ........................................................................................................... 496.3


6.4 Documentation .................................................................................................................. 516.5 Known restrictions ............................................................................................................. 516.6


7

MXpro 2.3.9 SP1 .............................................................................................................. 58

7/24/2019 m 003927

4/78

4

7.1 Release information .......................................................................................................... 58

7.2




8 MXpro 2.3.9 (Patch 3) ...................................................................................................... 628.1


8.2 Version information ........................................................................................................... 638.3


8.4 Documentation .................................................................................................................. 648.5 Addressed Defects and Changes ............. ...................... ...................... ..................... ....... 65

9 MXpro 2.3.9 (Patch 2) ...................................................................................................... 66

9.1

Release information .......................................................................................................... 669.2




10 MXpro 2.3.9 (Patch 1) ...................................................................................................... 7010.1


11

MXpro 2.3.9 ...................................................................................................................... 71

11.1 Release information .......................................................................................................... 7111.2 Version information ........................................................................................................... 7211.3


11.4

Documentation .................................................................................................................. 74

11.5 Known restrictions ............................................................................................................. 7411.6


7/24/2019 m 003927

5/78

5

1 XSOFT-CODESYS V2.3.9 SP4

1.1 Release information

Product XSOFT-CODESYS-2

Release 2.3.9 SP4

Build 1858

Setup Setup_XSOFT_CODESYS_V2.3.9_SP4.exe

Product Management H. Heck

Test Management A. Schmid

Quality Management P. Zuber

7/24/2019 m 003927

6/78

6

1.1.1

Programming system

Component Actual Version

CoDeSys 2.3.9.44

CoDeSys Gateway 2.3.9.31

CoDeSys OPC 2.3.13.11

1.1.2

Target firmware

Firmware Actual Version

RTS for XV-1xx, XV-2xx, XV-4xx, XVS-4xx, MA2-450, XC-152TargetFirmwareWinCE_V2.4.13.exe 2.4.13

RTS for XVC-6xxTargetFirmwareVxWorks-V141.exe

1.41

RTS for XVC-100TargetFirmware166-V129.exe

1.29

RTS for XN-PLC-CANopenUpdate_XNPLCCANopen_V01_05_Build_1033.hex

1.05

RTS for XC-101Update_XC101_V04_02_Build_4002.hex

4.02

RTS for XC-121Update_XC121_V01_17_Build_1152.hex

1.17

RTS for XC-201btsxc201_v010515.nbk

1.05.15

RTS for XC-202TargetFirmwareWinCE_V2.4.13.exe (btsxc202_v020413.bin)

2.4.13 1)

RTS for EC4P-221Update_EC4P221_V02_40_Build_2240.hex

2.40

RTS for EC4P-222Update_EC4P222_V02_40_Build_2240.hex

2.40

1)Format of version information (major.minor.revision.build) changed

7/24/2019 m 003927

7/78

7

1.1.3

Target systems

Target system Actual Version

XV-1xx 2.3.9 SP4

XV-2xx 2.3.9 SP4

XV-4xx 2.3.9 SP4

XVS-4xx 2.3.9 SP4

MA2-450 2.3.9 SP4

XVC-100 2.3.9 SP4

XVC-6xx 2.3.9 SP4

XN-PLC-CANopen 2.3.9 SP4

EC4P-200 2.3.9 SP4

XC-CPU101-C64K-8DI-6DO 2.3.9 SP4

XC-CPU101-C128K-8DI-6DO 2.3.9 SP4

XC-CPU101-C256K-8DI-6DO 2.3.9 SP4

XC-CPU121-2C256K 2.3.9 SP4

XC-CPU201-EC256K-8DI-6DO 2.3.9 SP4

XC-CPU201-EC256K-8DI-6DO-XV 2.3.9 SP4

XC-CPU201-EC512K-8DI-6DO 2.3.9 SP4

XC-CPU201-EC512K-8DI-6DO-XV 2.3.9 SP4

XC-CPU202-EC4M-8DI-6DO-XV 2.3.9 SP4

XC-152 2.3.9 SP4

All target systems can be installed additionally to previously installed versions. Previously

installed target systems are not affected.

7/24/2019 m 003927

8/78

8

1.2

Features and changes

Components of PLC programming system CoDeSys updated

Fixed security vulnerabilities

Components of PLC runtime system CoDeSys updated


Various firmware updates

Various library changes

Various GSD/EDS files for CAN, Profibus and SWD updated

GSD/EDS files for SWD functionality updated

Modules "EU5E-SWD-4PT-2", "DX-NET-SWD1", "DX-NET-SWD3", "SL4-SWD" and "SL7-

SWD" are now supported

1.3 Documentation

Various documentation changes

1.4 Known restrictions

-

1.5 Addressed Defects and Changes

1.5.1 XSOFT-CODESYS V2.3.9 SP4

Ticket Summary Status

642 Various GSD/EDS files for CAN, Profibus and SWD updated. Old versionsof various GSD/EDS files removed.

fixed

642 GSD/EDS files for SWD functionality updated.

Modules "EU5E-SWD-4PT-2", "DX-NET-SWD1", "DX-NET-SWD3", "SL4-SWD" and "SL7-SWD" are now supported.

fixed

641 Remote Client updated fixed

636 Components of PLC programming system CoDeSys updated.New basic version 2.3.9.44

fixed

631 Web visu: Java version > 7u51 needs signed applets. fixed

7/24/2019 m 003927

9/78

9

1.5.2 Target system XV-1xx


640 Firmware installation: The target system installation or the firmware updateis now reached in the PLC programming system via inthe 'Firmware' tab.

fixed

639 Library SysLibSockets.lib updated: No functional changes, data typeSOCKET_KEEPALIVE added

fixed

639 Library SysLibAlarmTrend.lib updated fixed

- Firmware updated (PLC runtime system / operating system) fixed

1.5.3

Target system XV-2xx



fixed


fixed


1.5.4




fixed


fixed



7/24/2019 m 003927

10/78

10

1.5.5

Target system MA2-450



fixed


fixed



1.5.6

Target system XVC-100



fixed

1.5.7 Target system XVC-6xx



fixed

1.5.8

Target system XVS-4xx



fixed


fixed



7/24/2019 m 003927

11/78

11

1.5.9

Target system XC-152



fixed


fixed



1.5.10



639 Library SysLibSockets.lib updated: no functional changes, data typeSOCKET_KEEPALIVE added

fixed

1.5.11




fixed



1.5.12




fixed


fixed


630 New firmware download functionality fixed


7/24/2019 m 003927

12/78

12

1.5.13 RTS for XV-1xx, XV-2xx, XV-4xx, XVS-4xx, MA2-450, XC-152


644 PLC runtime system updatedNew basic version 2.4.7.45

fixed

633 Operating system updatednew OS V2.26.7 (CE5.0) for XV-1xx, XV-2xx, XV-4xx, XVS-4xx, MA2-450and XC-152

fixed

628 User specific tcp/ip communication port number is now supported. Registryentry "TcpIp_Port" added.

fixed

1.5.14

RTS for XC202


643 PLC runtime system updatedNew basic version 2.4.7.45

fixed

634 Function AddIpAddress does not work fixed

630 Firmware download/update functionality changed. New functionality to getversion information of firmware component.

fixed

7/24/2019 m 003927

13/78

13

2 XSOFT-CODESYS V2.3.9 SP3 (Patch 2)



Release 2.3.9 SP3 (Patch 2)

Build 1794

Setup Setup_XSoft_CoDeSys_V2.3.9_SP3.exe




7/24/2019 m 003927

14/78

14

2.2

Version information

2.2.1

Programming system

Component Actual Version Previous Version

CoDeSys 2.3.9.35 2.3.9.35

CoDeSys Gateway 2.3.9.28 2.3.9.25

CoDeSys OPC 2.3.13.8 2.3.13.8

2.2.2

Target firmware

Firmware Actual Version Previous Version

TargetFirmwareWinCE_V2.4.12.exeRTS WinCE for XV-1xx, XV-2xx, XV-4xx, XVS-4xx, MA2-450,XC-152

2.4.12 2.4.11

TargetFirmwareVxWorks-V141.exeRTS VxWorks for XVC-6xx

1.41 1.39

TargetFirmware166-V129.exeRTS for XVC-100

1.29 1.29

Update_XNPLCCANopen_V01_05_Build_1033.hexRTS XN for XN-PLC-CANopen

1.05 1.05

Update_XC101_V04_02_Build_4002.hex

for XC-101

4.02 4.02

Update_XC121_V01_17_Build_1152.hexfor XC-121

1.17 1.17

btsxc201_v010510.nbkfor XC-201

1.05.10 1.05.10

btsxc202_v010015.binfor XC-202

1.00.15 1.00.13

Update_EC4P221_V02_40_Build_2240.hexfor EC4P-221

2.40 2.39


2.40 2.39

7/24/2019 m 003927

15/78

15

2.2.3

Target systems

Target system Actual Version Previous Version

XV-1xx 2.3.9 SP3 2.3.9 SP3

XV-2xx 2.3.9 SP3 2.3.9 SP3

XV-4xx 2.3.9 SP3 2.3.9 SP3

XVS-4xx 2.3.9 SP3 2.3.9 SP3

MA2-450 2.3.9 SP3 2.3.9 SP3

XVC-100 2.3.9 SP3 2.3.9 SP3

XVC-6xx 2.3.9 SP3 2.3.9 SP3

XN-PLC-CANopen 2.3.9 SP3 2.3.9 SP3

EC4P-200 2.3.9 SP3 2.3.9 SP3

XC-CPU101-C64K-8DI-6DO 2.3.9 SP3 2.3.9 SP3



XC-CPU121-2C256K 2.3.9 SP3 2.3.9 SP3

XC-CPU201-EC256K-8DI-6DO 2.3.9 SP3 2.3.9 SP3

XC-CPU201-EC256K-8DI-6DO-XV 2.3.9 SP3 2.3.9 SP3



XC-CPU202-EC4M-8DI-6DO-XV 2.3.9 SP3 2.3.9 SP3

XC-152 2.3.9 SP3 2.3.9 SP3



7/24/2019 m 003927

16/78

16

2.3


Gateway Server components updated



GSD/EDS files for SWD functionality updated

Modules "WOE-SWD-ECS3D2D" and "WOE-SWD-MOTUS" are now supported

2.4 Documentation

-


-

7/24/2019 m 003927

17/78

17

2.6

Addressed Defects and Changes

2.6.1

XSOFT-CODESYS V2.3.9 SP3

Ticket Summary Type Status

619 Remote Client updated change fixed

614

CDS-11040CDS-11041

Gateway Server components of PLC programming systemCoDeSys updated: Fixed security vulnerabilities

change fixed

- GSD/EDS files for SWD functionality updatedModules "WOE-SWD-ECS3D2D" and "WOE-SWD-MOTUS" are

now supported.

changed fixed



624 Target settings: UDINT_TO_REAL() returns wrong value. Fixedin target settings (SupportULongToReal=1)

bug fixed

621 Library 3S_CANopenMaster.lib changed: Node guarding with lifetime factor 2 leads to problems after node restart => Fixed errorin guarding functions. After node restart, each value of guarding

toggle bit is accepted.

bug fixed

607 Library 3S_CANopenManager.lib changed: Independent oftransmission type and data content of TX-PDOs, TX-PDOs aresent after "node start" once.

change fixed

- RTS WinCE / Firmware updated change fixed

2.6.3



624 Target settings: UDINT_TO_REAL() returns wrong value. Fixed

in target settings (SupportULongToReal=1)

bug fixed

621 Library 3S_CANopenMaster.lib changed: Node guarding with lifetime factor 2 leads to problems after node restart => Fixed errorin guarding functions. After node restart, each value of guardingtoggle bit is accepted.

bug fixed


change fixed


7/24/2019 m 003927

18/78

18

2.6.4




bug fixed


bug fixed


change fixed


2.6.5




bug fixed


bug fixed


change fixed


2.6.6 Target system XVS-4xx



bug fixed


7/24/2019 m 003927

19/78

19

2.6.7




bug fixed


bug fixed


change fixed


2.6.8

Target system XVC-6xx


- RTS VxWorks / Firmware updated change fixed

2.6.9



- Library WSAFunction.lib changed:New function "WSA_SSL_PERFORM_HANDSHAKE()" added.

new feature fixed

- Firmware updated change fixed

2.6.10

Target system EC4P-2xx



7/24/2019 m 003927

20/78

20

2.6.11

RTS WinCE V2.4.12


620 Installation: Operating system updatedNew OS V2.26.6 (CE5.0) for XV-1xx, XV-2xx, XV-4xx, XVS-4xx,XC-152 and MA2-450

change fixed

613 Firmware download: FTP download with optional port number isnow supported.

new feature fixed

611 RTS WinCE: ProfibusDPV1 Read/Write on EU5C-SWD-DP does not work.

bug fixed

609 RTS WinCE: ProfibusDPV1 Read/Write with baud rate 9.6/19.2 kBaud does not work.

bug fixed

605 Library SysLibFile, function SysFileGetSize(): At network fileaccess the file size is always 0.

bug fixed

605 Library SysLibFileAsync, function block SysFileGetSizeAsync():At network file access the f ile size is always 0.

bug fixed

601 RTS WinCE: PLC browser commands "setpwd" and "delpwd"are now supported.

new fixed

598 RTS WinCE: EasyNetIf port 10001 is blocked (by SWD-Driver), port 10002 will beused.

change fixed

- RTS WinCE: PLC runtime system updatedNew basic version 2.4.7.42

change fixed

2.6.12 RTS VxWorks V1.41


604 RTS VxWorks: CstUDPTx fails with new Ethernet-Driver for RTL 8103EL

bug fixed

600 RTS VxWorks: Additions for new Board SOM4463NSupport for Realtek RTL8103EL Ethernet

new feature fixed

- Installation: EPAM runtime system updatedNew basic version 3.5.0190

change fixed

7/24/2019 m 003927

21/78

21

2.6.13

RTS btsxc202_v010015.bin


- CODESYS vulnerability issue bug fixed

- CAN direct: send TX-telegrams in state"SYSCAN_OUTPUTQUEUE_FULL" as well

bug fixed

- RTS WinCE: PLC runtime system updatedNew basic version 2.4.7.42

change fixed

2.6.14 RTS Update_EC4P221_V02_40_Build_2240.hex


- New firmware build, no functional changes



00000330 Modbus TCP slave communication sometime stops bug fixed

7/24/2019 m 003927

22/78

22





Build 1710





7/24/2019 m 003927

23/78

23

3.2

Version information

3.2.1

Programming system


CoDeSys 2.3.9.35 2.3.9.35


CoDeSys OPC 2.3.13.8 2.3.13.8

3.2.2

Target firmware



2.4.11 2.4.10


1.39 1.39


1.29 1.29


1.05 1.05


for XC-101

4.02 4.01


1.17 1.17


1.05.10 1.05.10


1.00.13 1.00.12


2.39 2.38


2.39 2.38

7/24/2019 m 003927

24/78

24

3.2.3

Target systems


XV-1xx 2.3.9 SP3 2.3.9 SP3

XV-2xx 2.3.9 SP3 2.3.9 SP3

XV-4xx 2.3.9 SP3 2.3.9 SP3

XVS-4xx 2.3.9 SP3 2.3.9 SP3

MA2-450 2.3.9 SP3 2.3.9 SP3

XVC-100 2.3.9 SP3 2.3.9 SP3

XVC-6xx 2.3.9 SP3 2.3.9 SP3


EC4P-200 2.3.9 SP3 2.3.9 SP3




XC-CPU121-2C256K 2.3.9 SP3 2.3.9 SP3






XC-152 2.3.9 SP3 2.3.9 SP3



7/24/2019 m 003927

25/78

25

3.3



3.4 Documentation

Documentation for EC4E added



-

7/24/2019 m 003927

26/78

26

3.6


3.6.1



- - - -

3.6.2



590 PLC configuration, EasyNet: Target does not support "daisy-chain" functionality => removed button "Configure easyNet"

change fixed


3.6.3




change fixed


3.6.4




change fixed


3.6.5




change fixed


7/24/2019 m 003927

27/78

27




3.6.7 Target system XC-152



change fixed

583 RTS WinCE: In an online connection with the SWD-Assist thetarget is shown as "XV100".

Bug fixed


3.6.8




3.6.9




3.6.10 Target system EC4P-2xx



7/24/2019 m 003927

28/78

28

3.6.11

RTS WinCE V2.4.11


599 RTS WinCE, SWD: Error due to incorrect swd conformance testfixed.

bug fixed

595 RTS WinCE, Profibus DP-Master CMM-MPI: Error "Wrong HSA"changed to correction of HSA. Instead of error set HSA to nextvalid value.

change fixed

587 RTSWinCE, Profibus: Fixed problem with "Intel/Motorola" Word-Swap on "special configuration"

bug fixed

586 RTS WinCE: The SWD-Assist should show the firmware versionof running PLC runtime system.

change fixed

585 RTS WinCE: Possible wrong detection of swd configuration onpower on is fixed

bug fixed

583 RTS WinCE: In an online connection with the SWD-Assist thetarget is shown as "XV100".

bug fixed

581 RTS WinCE, SWD: LED shows wrong status for "No targetconfiguration available" => Fixed error in SWD coordinator.

bug fixed

- Installation: Operating system updatedNew OS V2.26.1 (CE5.0) for XV-1xx, XV-2xx, XV-4xx, XVS-4xx,XC-152 and MA2-450

change fixed

3.6.12



- Interrupts some time freezed bug fixed

- CANOpen: No guarding during STOP bug fixed

- Library xSysLibCom200.lib handles local RS232 new feature fixed

3.6.13

RTS Update_EC4P221_V02_39_Build_2239.hex


00000198 Routing with XC200 and MFD57 sometimes failed bug fixed

3.6.14

RTS Update_EC4P222_V02_39_Build_2239.hex


00000198 Routing with XC200 and MFD57 sometimes failed bug fixed

- Ethernet connection works faster change fixed

7/24/2019 m 003927

29/78

29

3.6.15

RTS Update_XC101_V04_02_Build_4002.hex


00001484 XIOC Modules with parameters does not work on XIOC-Extension Slots

bug fixed

7/24/2019 m 003927

30/78

30




Release 2.3.9 SP3

Build 1664


Product Management I. Hengartner



7/24/2019 m 003927

31/78

31

4.2

Version information

4.2.1

Programming system


CoDeSys 2.3.9.35 2.3.9.25


CoDeSys OPC 2.3.13.8 2.3.13.7

4.2.2

Target firmware



2.4.10 2.4.9


1.39 1.39


1.29 1.29


1.05 1.05


for XC-101

4.01 3.15


1.17 1.14


1.05.10 1.05.04


1.00.12 1.00.08


2.38 2.32


2.38 2.32

7/24/2019 m 003927

32/78

32

4.2.3

Target systems


XV-1xx 2.3.9 SP3 2.3.9 SP2 (Patch 1)

XV-2xx 2.3.9 SP3 2.3.9 SP2 (Patch 1)

XV-4xx 2.3.9 SP3 2.3.9 SP2 (Patch 1)

XVS-4xx 2.3.9 SP3 2.3.9 SP2 (Patch 1)

MA2-450 2.3.9 SP3 2.3.9 SP2 (Patch 1)

XVC-100 2.3.9 SP3 2.3.9 SP2

XVC-6xx 2.3.9 SP3 2.3.9 SP2


EC4P-200 2.3.9 SP3 2.3.9 SP2




XC-CPU121-2C256K 2.3.9 SP3 2.3.9 SP2






XC-152 2.3.9 SP3 -



7/24/2019 m 003927

33/78

33

4.3


Components of PLC programming system CoDeSys updated

Following target system is now supported

XC-152

Following target systems are no longer supported

XC-CPU101-64K-8DI-6DO-XV





new libraries added

various libraries changed and updated

New GSD/EDS files for SWD functionality

Problems with the installation of target systems on operating system Windows 7 are fixed.

4.4 Documentation

Documentation for XIOC and SWD added



-

7/24/2019 m 003927

34/78

34

4.6


4.6.1



426 Web visu: format string %i is not working. CoDeSys-Bugfix#8617

bug fixed

443 Target visu: Dynamic texts are not working in table header.CoDeSys-Bugfix: #5886: Translation: Visu table header aremissing in translation fileCoDeSys-Bugfix: #7476: Webvisu: Problems of visu elementswith option Best-Fit

bug fixed

501 Documentation for XIOC and SWD added new feature fixed

540 Setup: On operating system Windows 7, the target systems arenot installed and uninstalled correctly.

The name, version and location strings are not terminatedcorrectly. Long texts containing uninitialized strings aredisplayed after the correct values. This leads to problems whenusing or uninstalling the target systems.

bug fixed

553 Components of PLC programming system CoDeSys updated change fixed

562 Setup: Remote Client added new feature fixed

579 Setup: Executable installation files signed with a trusted software

certificate

new feature fixed

7/24/2019 m 003927

35/78

35

4.6.2



436 Web visu: Extended monitoring service (complex data types) isnow supported

new feature fixed

491 Export and import of Profibus slaves is now supported.CoDeSys-Bugfix #10139: Error on Import of exported Profibusslaves

bug fixed

531 Library WSAFunctions.lib added:Used for mail delivery over Secure Sockets (SSL)

new feature fixed

539 Library3S_CANopenNetVar.lib changed: Event triggered CANnetwork variables are no longer sent when starting the plc

project.

bug fixed

542 The Profibus Master (Hilscher/Onboard) supports automaticchange of the byte order (Intel / Motorola) with an additionalconfiguration switch

new feature fixed

543 Target visu: The output of password text in hidden format is nowsupported

bug fixed

555 Library 3S_CANopenMaster.lib changed: Startup behavior ofCAN master changed => Fixed error in CAN startup if manynodes are configured but not connected.

bug fixed

556 Library SysLibAlarmTrend.lib updated change fixed

556 Library SysLibTargetVisu.lib updated change fixed

567 Library 3S_CANopenMaster.lib changed:After expiration of the guard time, the guard timer is not restartedimmediately. The guard timer is started again until the next call=> Fixed error in CAN monitoring

bug fixed

558 Library Syslib_Add.lib changed:New function "Sys_IpMaskAddr2" added. Function to read the IPaddress, mask address and gateway address.

new feature fixed

559 Library CanUser.lib and 3S_CanDrv.lib changed:New function "CanUser_Busload" added

new feature fixed

- Library SysLibSockets.lib updated change fixed

- Library SysLibFileStream.lib updated change fixed

- Target settings: local library variables in function blocks are now

invisible

new feature fixed





new feature fixed

491 Export and import of Profibus slaves is now supported. bug fixed
https://chsscm001/projects/XSoft-CoDeSys-2/browser/trunk/PlcProjects/Libraries/CANopen/3S_CANopenNetVar.lib?rev=1622https://chsscm001/projects/XSoft-CoDeSys-2/browser/trunk/PlcProjects/Libraries/CANopen/3S_CANopenNetVar.lib?rev=1622

7/24/2019 m 003927

36/78

36

CoDeSys-Bugfix #10139: Error on Import of exported Profibus

slaves531 Library WSAFunctions.lib added:

Used for mail delivery over Secure Sockets (SSL)new feature fixed

539 Library3S_CANopenNetVar.lib changed: Event triggered CANnetwork variables are no longer sent when starting the plcproject.

bug fixed


new feature fixed


bug fixed

555 Library 3S_CANopenMaster.lib changed: Startup behavior of

CAN master changed => Fixed error in CAN startup if manynodes are configured but not connected.

bug fixed


bug fixed


new feature fixed


new feature fixed



- Target settings: local library variables in function blocks are nowinvisible

new feature fixed


4.6.4



436 Web visu: Extended monitoring service (complex data types) is

now supported

new feature fixed


bug fixed


new feature fixed


bug fixed

542 The Profibus Master (Hilscher/Onboard) supports automaticchange of the byte order (Intel / Motorola) with an additional

new feature fixed
https://chsscm001/projects/XSoft-CoDeSys-2/browser/trunk/PlcProjects/Libraries/CANopen/3S_CANopenNetVar.lib?rev=1622https://chsscm001/projects/XSoft-CoDeSys-2/browser/trunk/PlcProjects/Libraries/CANopen/3S_CANopenNetVar.lib?rev=1622https://chsscm001/projects/XSoft-CoDeSys-2/browser/trunk/PlcProjects/Libraries/CANopen/3S_CANopenNetVar.lib?rev=1622https://chsscm001/projects/XSoft-CoDeSys-2/browser/trunk/PlcProjects/Libraries/CANopen/3S_CANopenNetVar.lib?rev=1622

7/24/2019 m 003927

37/78

37

configuration switch


bug fixed


bug fixed




bug fixed


new feature fixed


new feature fixed




new feature fixed


4.6.5




new feature fixed


bug fixed


new feature fixed


bug fixed


new feature fixed


bug fixed


bug fixed
https://chsscm001/projects/XSoft-CoDeSys-2/browser/trunk/PlcProjects/Libraries/CANopen/3S_CANopenNetVar.lib?rev=1622https://chsscm001/projects/XSoft-CoDeSys-2/browser/trunk/PlcProjects/Libraries/CANopen/3S_CANopenNetVar.lib?rev=1622

7/24/2019 m 003927

38/78

38




bug fixed


new feature fixed


new feature fixed


- Library SysLibFileStream.lib updated change fixed- Target settings: local library variables in function blocks are now

invisiblenew feature fixed





new feature fixed


bug fixed


new feature fixed


new feature fixed




new feature fixed




new feature fixed


7/24/2019 m 003927

39/78

39

4.6.7



- Library CANUser.lib changed:FB CanUser_ReadQueue not restricted to 8 Telegramsanymore. In one FB instance max. 25 CAN telegrams will beread from CAN driver.

change fixed


bug fixed

- Corrected timer tick bug fixed





change fixed

- Possible loss of Retain Data during Power Down bug fixed


4.6.9




change fixed

- Library SysLibPlcCtrl.lib changed:Function SysSaveRetains has new return value

change fixed

- Library DNP3_V20.lib and DNP3_V22 added new feature fixed- Library XC200_UTIL2_V24.lib added new feature fixed


new feature fixed


bug fixed


7/24/2019 m 003927

40/78

40

4.6.10




new feature fixed


change fixed

- Library DNP3_V20.lib and DNP3_V22.lib added new feature fixed

- Library XC200_UTIL2_V24.lib added new feature fixed

436 Web visu: Extended monitoring service (complex data types) is

now supported

new feature fixed


bug fixed

566 Target settings: the update of unused IOs is now supported new feature fixed


4.6.11 Target system EC4P-2xx



change fixed

- Enhanced stability of Ethernet-Stack change fixed

- Faster access to MMC change fixed

- Library EC_File.lib changed: Directories can be created new feature fixed

- Library SysLibSockets.lib added new feature fixed


7/24/2019 m 003927

41/78

41

4.6.12

RTS WinCE V2.4.10


- RTS WinCE: Basic version 2.4.7.32 of runtime system integrated change fixed

433 RTS WinCE: Target visu supports long texts (Strings up to 255Bytes

change fixed

530 SmartWire-DT functionality:IO update of SmartWire-DT units with addressed arrays orstructures is now supported

bug fixed

531 RTS WinCE: Mail delivery over Secure Sockets (SSL) is nowsupported

new feature fixed

538 RTS WinCE: PLC runtime system crashes if target visu used jpg

files

bug fixed

541 RTS WinCE: The shutdown of the PLC runtime system registersno longer license points.

bug fixed

548 RTS WinCE: New PLC browser command 'wdgshow' is nowsupported

new feature fixed

552 RTS WinCE: Based on display resolution and displayorientation, an automatic scaling of the dialog is now supported.

new feature fixed

557 RTS WinCE: WEB server updated (V1.1.9.10) change fixed

561 RTS WinCE: ProfibusIf communication errors occur, DPV1 messages are not sent =>Fixed error and set DPV1 state to idle

bug fixed

578 RTS WinCE: Default value of TCPIP_BLOCK_READ_TIMEOUTset to 40 seconds (Value can be changed in file PlcRts.reg)

change fixed

579 Installation: Executable installation file signed with a trustedsoftware certificate

new feature fixed

- SWD online functionality is now supported new feature fixed

- Installation: Operating system updatedNew OS V2.26.0 (CE5.0) for XV-1xx, XV-2xx, XV-4xx, XVS-4xxand MA2-450

change fixed

- Installation: Target system XC-152 is now supported new feature fixed

4.6.13



- Possible loss of Retain Data during Power Down bug fixed

- No bootproject created if CAN is active change fixed

7/24/2019 m 003927

42/78

42

4.6.14

RTS btsxc201_v010510.nbk


- WEB server updated (V1.1.9.10) change fixed

- Additional UTIL functions new feature fixed

- Additional DNP3 functions new feature fixed

4.6.15



- WEB server updated (V1.1.9.10) change fixed- Additional UTIL functions new feature fixed

- Additional DNP3 functions new feature fixed

- RestoreRetain function fixed bug fixed



- Signal data overflow bug fixed

- Load Bootproject from MMC is signalised by LEDred/yellow/green

new feature fixed

- Faster MMC access change fixed



- Signal data overflow bug fixed

- MAC Address bug bug fixed

- Load Bootproject from MMC is signalised by LED

red/yellow/green

new feature fixed

- Faster MMC access change fixed

- Enhanced stability of Ethernet sockets,compatible with XC-PLCs

change fixed

7/24/2019 m 003927

43/78

43

4.6.18



- Support for new flash devices on hardware change fixed

- System tick for Timer function blocks corrected bug fixed

7/24/2019 m 003927

44/78

44





Build 1504

Setup Setup_XC_XV_Targets_V2.3.9_SP2_Patch_1.exe




This version is not released as typical full installation.

It includes a specific installation of some PLC target systems.

7/24/2019 m 003927

45/78

45

5.2

Version information

5.2.1

Programming system

No part of the current release

5.2.2 Target firmware


TargetFirmwareWinCE_V2.4.9.exeRTS WinCE for XV-1xx, XV-2xx, XV-4xx, XVS-4xx, MA2-450

2.4.9 2.4.8

5.2.3 Target systems


XV-1xx 2.3.9 SP2 (Patch 1) 2.3.9 SP2

XV-2xx 2.3.9 SP2 (Patch 1) 2.3.9 SP2

XV-4xx 2.3.9 SP2 (Patch 1) 2.3.9 SP2

XVS-4xx 2.3.9 SP2 (Patch 1) 2.3.9 SP2

MA2-450 2.3.9 SP2 (Patch 1) 2.3.9 SP2



5.3 Features and changes

SmartWire-DT functionality for XV-1xx is now supported.



new libraries added


5.4 Documentation

No documentation changes

7/24/2019 m 003927

46/78

46

5.5

Known restrictions

SmartWire-DT functionality

IO update of SmartWire-DT units with addressed arrays or structures does not work.

abyDPout AT %QB0: ARRAY [1..10] OF BYTE;

abyDPin AT %IB0: ARRAY [1..10] OF BYTE;

5.6 Addressed Defects and Changes



495 Library 3S_CANopenMaster.lib changed:The fast startup of can nodes does not work => Fixed error in CANinitialization

change fixed

497 Target visu: Colored buttons are now supported new feature fixed

502 PLC configuration: SmartWire-DT functionality is now supported new feature fixed

RTS WinCE / Firmware updated change fixed

5.6.2 Target system XV-2xx, XV-4xx and MA2-450


495 Library 3S_CANopenMaster.lib changed:The fast startup of can nodes does not work => Fixed error in CANinitialization

change fixed



5.6.3





7/24/2019 m 003927

47/78

47

5.6.4

RTS WinCE V2.4.9


493 RTS WinCE: Target visuWhen a button (Tip mode ) is pressed while a touch error isdetected, the button was not released => Fixed behaviour intouch handling

bug fixed

497 RTS WinCE: Target visuColored buttons are now supported (CE5.0)

new feature fixed

498 RTS WinCE: WEB serverMultipurpose Internet Mail Extensions (MIME) xlsm / xlsx arenow supported

new feature fixed

499 RTS WinCE: EasyNetSimultaneous operation of EasyNet- and CAN-Master does notwork => Fixed error in CAN Initialization

bug fixed

502 RTS WinCE: SmartWire-DT functionalityThe use of SmartWire-DT interface is now supported

new feature fixed

503 TargetFirmwareWinCE: FTP console application replaced withnew FTP application

change fixed

505 TargetFirmwareWinCE: Operating system updatedNew OS V2.24.5 (CE5.0) for XV-1xx, XV-2xx, XV-4xx, XVS-4xxand MA2-450

change fixed

509 RTS WinCE: Target visuBasic version 2.4.7.27 integrated

change fixed

529 RTS WinCE: After changing the IP address, the functionSys_IpMaskAddr() returned wrong values.

bug fixed

7/24/2019 m 003927

48/78

48




Release 2.3.9 SP2

Build 1384





7/24/2019 m 003927

49/78

49

6.2

Version information

6.2.1

Programming system


CoDeSys 2.3.9.25 2.3.9.5


CoDeSys OPC 2.3.13.7 2.3.12.2

6.2.2

Target firmware


TargetFirmwareWinCE_V2.4.8.exeRTS WinCE for XV-1xx, XV-2xx, XV-4xx, XVS-4xx, MA2-450

2.4.8 2.4.7


1.39 1.39


1.29 1.29


1.05 1.05


3.15 3.15


1.15 1.14


1.05.06 1.05.04


1.00.08 -


2.32 2.31


2.32 2.31

7/24/2019 m 003927

50/78

50

6.2.3

Target systems


XV-1xx 2.3.9 SP2 2.3.9 SP1

XV-2xx 2.3.9 SP2 2.3.9 SP1

XV-4xx 2.3.9 SP2 2.3.9 SP1

XVS-4xx 2.3.9 SP2 2.3.9 SP1

MA2-450 2.3.9 SP2 2.3.9 SP1

XVC-100 2.3.9 SP2 2.3.9 SP1

XVC-6xx 2.3.9 SP2 2.3.9 SP1


EC4P-200 2.3.9 SP2 2.3.9

XC-CPU101-C64K-8DI-6DO 2.3.9 SP2 2.3.9

XC-CPU101-C64K-8DI-6DO-XV 2.3.9 SP2 2.3.9

XC-CPU101-C128K-8DI-6DO 2.3.9 SP2 2.3.9


XC-CPU101-C256K-8DI-6DO 2.3.9 SP2 2.3.9


XC-CPU121-2C256K 2.3.9 SP2 2.3.9

XC-CPU201-EC256K-8DI-6DO 2.3.9 SP2 2.3.9

XC-CPU201-EC256K-8DI-6DO-XV 2.3.9 SP2 2.3.9

XC-CPU201-EC512K-8DI-6DO 2.3.9 SP2 2.3.9XC-CPU201-EC512K-8DI-6DO-XV 2.3.9 SP2 2.3.9

XC-CPU202-EC4M-8DI-6DO-XV 2.3.9 SP2 -



7/24/2019 m 003927

51/78

51

6.3


Replaces the existing software products MXpro and easy Soft CoDeSys.

Components of PLC programming system CoDeSys updated.

Operating system Windows 7 now supported

The import of SmartWire-DT configuration data into the PLC configuration is now supported.

The use of additional CAN interface is now supported.

New target system XC-CPU202-EC4M-8DI-6DO-XV



new libraries added


various libraries removed

PLC libraries of targets XC-CPU-101, XC-CPU-201 and EC4P-200:

As a result of internal migration all PLC libraries were new time stamps . Information about

effective libraries changes are listed in chap. "Addressed Defects and Changes".

6.4 Documentation



System events / call of POUs

If you compile existing PLC projects with the new version, the system event-based calls of POUs,

which are defined in the task configuration do not work. However it is possible to resolve the problem

with a workaround. Define an input variable in each POU

Sample:

PROGRAM

VAR_INPUT

xDummy: BOOL;

END_VAR

7/24/2019 m 003927

52/78

52

6.6


6.6.1



458 Components of PLC programming system CoDeSys updated change fixed

- Library Util.lib changed:CoDeSys-Bugfix #9780: Too complex expression for SH removed

change fixed

6.6.2

Target system XV-1xx, XV-2xx, XV-4xx and MA2-450


457 CAN libraries changed: The use of additional CAN interface is nowsupported

change fixed

457 Library CanUser_Sync.lib added:Replaces the library CanSync_Lib.lib. The libraryCanUser_Sync.lib supports the use of additional CAN interfaces

new feature fixed

459 Library SysLibCallback.lib changed: events added change fixed

459 Library SysLibFileAsync.lib changed:CoDeSys-Bugfix #8336: Some defines for error codes missing

change fixed

459 Library SysLibMem.lib changed: No functional changes.

Comments changed

change fixed

462 RTS WinCE / Firmware updated change fixed

463 PLC configuration: The import of SmartWire-DT configuration datais now supported

new feature fixed

470 PLC configuration: Export and import of IO modules is nowsupported

new feature fixed

472 Library NetVarUdp_LIB_V23.lib changed:CoDeSys-Bugfix #8909: Memory overwrite using the FBNetVarSDO_Udp

change fixed

483 Library 3S_CANopenMaster.lib changed:If a boot-up object is received in state 97 (optional node notdetected), the can master will not initiate a node-reset command.

Solves problems with slow boot-up sequences of optional nodes.

change fixed

485 Target settings: Checkbox Load bootproject automatically is nowsupported

new feature fixed

7/24/2019 m 003927

53/78

53

6.6.3



459 Library SysLibCallback.lib changed: events added change fixed

459 Library SysLibFileAsync.lib changed:CoDeSys-Bugfix #8336: Some defines for error codes missing

change fixed

459 Library SysLibMem.lib changed: No functional changes.Comments changed

change fixed

462 RTS WinCE / Firmware updated change fixed


new feature fixed

472 Library NetVarUdp_LIB_V23.lib changed:

CoDeSys-Bugfix #8909: Memory overwrite using the FBNetVarSDO_Udp

change fixed

485 Target settings: Checkbox Load bootproject automatically isnow supported

new feature fixed

6.6.4 Target system XVC-100


463 PLC configuration: The import of SmartWire-DT configurationdata is now supported

new feature fixed


new feature fixed

6.6.5 Target system XVC-6xx



new feature fixed


new feature fixed

7/24/2019 m 003927

54/78

54

6.6.6

Target system XN-PLC-CANopen



new feature fixed

- CAN system libraries updated change fixed

- Library CanUser_Master.lib changed:FB CanUser_SdoTransfer: Filtered COB-ID will be released byreset

change fixed

- Library CanUser_Master.lib changed:FB CanUser_DiagNode: Compare entire EMCY-Telegram tocheck xNodeEmergencyError

change fixed




change fixed


change fixed

466/480 Checkers.dll added additionally into specific target systemdirectories change fixed





change fixed


change fixed

466/480 Checkers.dll added additionally into specific target systemdirectories

change fixed


7/24/2019 m 003927

55/78

55

6.6.9




change fixed


change fixed

472 Library NetVarUdp_LIB_V23.lib changed:CoDeSys-Bugfix #8909: Memory overwrite using the FBNetVarSDO_Udp

change fixed

466/480 Checkers.dll added additionally into specific target systemdirectories change fixed


6.6.10

Target system EC4P-2xx



change fixed


change fixed

- Library EC_Util2.lib changed:New function "PlcIdGetMacAddress" added

new feature fixed

- New Library: EC_Lib Sockets.libEthernet socket handling comes with demo in export fileEC_UDPcom.exp located in Library directory

new feature fixed


7/24/2019 m 003927

56/78

56

6.6.11

RTS WinCE V2.4.8


456 RTS WinCE: Refactoring CAN interfaceThe use of additional CAN interface is now supported

new feature fixed

464 RTS WinCE: Eaton labelingMicro Innovation and MXpro names removed. Registry keychanged

change fixed

465 TargetFirmwareWinCE: Eaton labelingMicro Innovation and MXpro names removed. Batch- andregistry files changed

change fixed

465 TargetFirmwareWinCE: Operating system updated

New OS V2.20.5 (CE3.0) for XV-2xx, XV-4xx, XVS-4xx andMA2-450

change fixed

465 TargetFirmwareWinCE: Operating system updatedNew OS V2.24.1 (CE5.0) for XV-1xx, XV-2xx, XV-4xx, XVS-4xxand MA2-450

change fixed

467 TargetFirmwareWinCE: Verify and compare the operatingsystem version before download

new feature fixed

467 TargetFirmwareWinCE: The dialog for selection of the targetsystem does not appear, if the firmware download is started intothe PLC programming tool

new feature fixed

451/468 RTS WinCE: Licensing of Target-/WEB visualisation correctedAlarm an trend function in combination with WEB visualisation

may request no license points

bug fixed

481 RTS WinCE: THC initialisation without DLL name is nowsupported

change fixed

486 RTS WinCE: Profibus CMM-MPIDue to a timing-problem the restart of a Siemens-PLC as DP-Slave is sometimes not successful (Input-Queue-Problem).

bug fixed

281 RTS WinCE: Profibus CMM-MPIPLC browser commands 'hilshow', 'dpsshow' and 'ioshow'removed (commands are not supported)

bug fixed

492 RTS WinCE: WEB server updated (V1.1.9.7) change fixed

6.6.12 RTS Update_XC121_V01_15_Build_1150.hex


- Support for new flash devices on hardware new feature fixed

7/24/2019 m 003927

57/78

57

6.6.13

RTS btsxc201_v010506.nbk


- Deadlock when setting RTC bug fixed

6.6.14 RTS btsxc202_v010008.bin


- 1stOS for a new device - -



- RS232 and CAN configuration were displayed new feature fixed



- RS232 and CAN configuration were displayed new feature fixed

00000319 OPC communication stopped bug fixed

7/24/2019 m 003927

58/78

58

7 MXpro 2.3.9 SP1


Product MXpro

Release 2.3.9 SP1

Build 1122

Setup Setup_MXpro_V2.3.9_SP1.exe




7/24/2019 m 003927

59/78

59

7.2

Version information

7.2.1

Programming system


CoDeSys 2.3.9.5 2.3.9.5


CoDeSys OPC 2.3.12.2 2.3.12.2

7.2.2

Target firmware

Target firmware Actual Version Previous Version

TargetFirmwareWinCE_V2.4.7.exefor XV-1xx, XV-2xx, XV-4xx, XVS-4xx, MA2-450

2.4.7 2.4.6

SetupTargetFirmwareVxWorks-V139.exefor XVC-6xx

1.39 1.39

SetupTargetFirmware166-V129.exefor XVC-100

1.29 1.29

Update_XNPLCCANopen_V01_05_Build_1033.hexfor XN-PLC-CANopen

1.05 1.05



XV-1xx 2.3.9 SP1 2.3.9

XV-2xx 2.3.9 SP1 2.3.9

XV-4xx 2.3.9 SP1 2.3.9

XVS-4xx 2.3.9 SP1 2.3.9

MA2-450 2.3.9 SP1 2.3.9

XVC-100 2.3.9 SP1 2.3.9

XVC-6xx 2.3.9 SP1 2.3.9

XN-PLC-CANopen 2.3.9 SP1 2.3.9



No functional changes on targets XVC-100, XVC-6xx and XN-PLC-CANopen. There were

only changed the descriptions.

7/24/2019 m 003927

60/78

60

7.3


Target visualization and Web visualization are now supported

Functionality to disable configured Profibus stations before initialization is now supported

New library

IO_Add.lib: User library with additional functions for IO configuration (disable configured

Profibus stations before initialization)

TargetFirmwareWinCE

New OS-Version V2.22.0 (CE5.0)

7.4 Documentation

New:

Documentation for target visualization

Changed:

M002381.pdf - User manual MXpro: MXpro/PLCWinCE (German)

M002382.pdf - User manual MXpro: MXpro/PLCWinCE (English)

7/24/2019 m 003927

61/78

61

7.5


7.5.1

MXpro V2.3.9 SP1


423 MXpro: Problems solved if MXpro is started by user with limitedaccount type. Location of general configuration directorieschanged (Compile, Upload, etc.).

bug fixed

7.5.2 RTS WinCE V2.4.7


110 Input-/Outputpuffer of Ethernet/IP function SYSEIP_Init enlarged bug fixed

400/403 XV-1xx: Management of retain data changed change fixed

402 System crash due incompatible SymARTIClient and ARTIClientdriver between PLC runtime system and other applications.Name of SymARTIClient and ARTIClient driver of PLC runtimesystem renamed.

bug fixed

404 Functionality to disable configured Profibus stations beforeinitialization is now supported

new feature fixed

406 Target visualization and Web visualization are now supported new feature fixed

413 TargetFirmwareWinCE: New OS (WinCE 5.0) change fixed416 Taskbar icon implemented. Hide-, minimize- and close button in

system bar of PLC application window implemented.new feature fixed

420 In case of unknown hardware identification, the diagnosis/textoutput will displayed in a message box.

new feature fixed

7/24/2019 m 003927

62/78

62

8 MXpro 2.3.9 (Patch 3)


Product MXpro

Release 2.3.9 (Patch 3)

Build 1017

Setup Setup_MXpro_V2.3.9.exe


Test Management I. Hengartner


7/24/2019 m 003927

63/78

63

8.2

Version information

8.2.1

Programming system


CoDeSys 2.3.9.5 2.3.9.5


CoDeSys OPC 2.3.12.2 2.3.12.2

8.2.2

Target firmware



2.4.6 2.4.6


1.39 1.39


1.29 1.29


1.05 1.05



XV-1xx 2.3.9 2.3.9

XV-2xx 2.3.9 2.3.9

XV-4xx 2.3.9 2.3.9

XVS-4xx 2.3.9 2.3.9

MA2-450 2.3.9 2.3.9

XVC-100 2.3.9 2.3.9

XVC-6xx 2.3.9 2.3.9

XN-PLC-CANopen 2.3.9 2.3.9



7/24/2019 m 003927

64/78

64

8.3


TargetFirmwareWinCE

New OS-Version V2.21.2 for XV-1xx

8.4 Documentation

New:

-

Changed:

-

7/24/2019 m 003927

65/78

65

8.5


8.5.1

RTS WinCE V2.4.6


401 TargetFirmwareWinCE: New OS for XV-1xx change fixed

7/24/2019 m 003927

66/78

66



Product MXpro

Release 2.3.9 (Patch 2)

Build 990





7/24/2019 m 003927

67/78

67

9.2

Version information

9.2.1

Programming system


CoDeSys 2.3.9.5 2.3.9.5


CoDeSys OPC 2.3.12.2 2.3.12.2

9.2.2

Target firmware



2.4.6 2.4.5


1.39 1.39


1.29 1.29


1.05 1.05



XV-1xx 2.3.9 -

XV-2xx 2.3.9 2.3.9

XV-4xx 2.3.9 2.3.9

XVS-4xx 2.3.9 2.3.9

MA2-450 2.3.9 2.3.9

XVC-100 2.3.9 2.3.9

XVC-6xx 2.3.9 2.3.9

XN-PLC-CANopen 2.3.9 2.3.9



7/24/2019 m 003927

68/78

68

9.3


Following target system is now supported

XV-1xx

NetVarUdp_LIB_V23.lib

This library is a bug fix of the previous version NetVarUdp_LIB_V23.lib V2.4.7.0 (Contained in MXpro

V2.3.9) for the target systems XV-2xx, XV-4xx, XVS-4xx and MA2-450.

To solve the STOP/START-Problem of the UDP-Networkvariables the new version of the library

NetVarUdp_LIB_V23.lib (V2.4.7.1) has to be used.

When installing the software, the user is asked whether he would like to replace the

previously installed library NetVarUdp_LIB_V23.lib V2.4.7.0 through the new library

NetVarUdp_LIB_V23.lib V2.4.7.1.

9.4 Documentation

New:

-

Changed:



7/24/2019 m 003927

69/78

69

9.5


9.5.1

RTS WinCE V2.4.6


383 Target XV-1xx is now supported new feature fixed

388 TargetFirmwareWinCE: New OS for XV-2xx, XV-4xx, XVS-4xxand MA2-450.

change fixed

392 DP-Master CMM-MPI: PLC runtime system crashes if stationwith station address 126 has been configured.

bug fixed

393 PB-diagnosis: PB-diagnosis of station with same station address

(SLA) as configured HSA did not work.

bug fixed

398 PLC-Runtime Shutdown: Shutdown of projects with DP-MasterCMM-MPI did not work.

bug fixed

399 DP-Master CMM-MPI: PLC runtime system crashes if wrongconfiguration with a length > 100 bytes has been configured.

bug fixed

7/24/2019 m 003927

70/78

70



This version was not released.

7/24/2019 m 003927

71/78

71

11 MXpro 2.3.9


Product MXpro

Release 2.3.9

Build 840





7/24/2019 m 003927

72/78

72

11.2

Version information

11.2.1

Programming system

Components Actual Version Previous Version

CoDeSys 2.3.9.5 2.3.6.4


CoDeSys OPC 2.3.12.2 2.3.11.0

11.2.2

Target firmware


TargetFirmwareWinCE_V2.4.4.exefor XV-2xx, XV-4xx, XVS-4xx, MA2-450

2.4.4 2.4.2 resp. 2.4.3


1.39 1.37


1.29 1.29


1.05 1.03



XV-2xx 2.3.9 2.3.6 SP1

XV-4xx 2.3.9 2.3.6 SP1

XVS-4xx 2.3.9 2.3.6 SP1

MA2-450 2.3.9 2.3.6 SP1

XVC-100 2.3.9 2.3.6 SP1

XVC-6xx 2.3.9 2.3.6 SP1

XN-PLC-CANopen 2.3.9 2.3.6 SP1



7/24/2019 m 003927

73/78

73

11.3


Operating System Windows Vista now supported.

Profibus DPV1 functionality for XV-4xx, XV-2xx, XVS-4xx, MA2-450

easy-NET functionality for XV-4xx, XV-2xx, MA2-450

Force functionality of CAN-I/Os

New libraries added

Standard_V2.lib

SysLibFileAsync.lib

SysLibFileStream.lib

SysLibForce.lib

SysLibGetAddress.lib

SysLibPLCConfig.lib

SysLibOs.lib

SysLibShm.lib

SysLibSocketsAsync.lib

SysLibSymbols.lib

TcpUdpLib.lib

SysLibEasyNet.lib

Hilscher.lib

SysLibDPV1Hilscher.lib

SysLibDPV1.lib

CANsync_Lib.lib

Various libraries changes

Util.lib: Typed literal warnings removed

Util_no_Real.lib: Typed literal warnings removed

SysLibCallback.lib: Comments changed

SysLibDir.lib: New function SysDirClose, comments changed

SysLibSockets.lib: New function SysSockGetLastErrorSync, various functional changes

SysLibProjectInfo.lib: New function SysGetProjectId, various functional changes

SysLibTasks.lib: Comments changed

3S_CanOpenMaster.lib: CanOpenMaster Start-up behaviour changed. Disabled delay between 2

NodeReset commands if no slave is on the bus.

NetVarUdp_LIB_V23.lib: New basic version

7/24/2019 m 003927

74/78

74

11.4 Documentation

New:



M000897.pdf - User manual MXpro: SymARTI-Library (German)

M002497.pdf - User manual MXpro: SymARTI-Library (English)

Changed:

Various documents


CAN: Baud rate 800kBaud needs OS Version > V2.20.3

7/24/2019 m 003927

75/78

75

11.6


11.6.1

MXpro V2.3.9


2 Display of Task-Times in Online-Mode:The User can add manually the Libraries SysTaskInfo.lib undSysLibTime.lib

new feature fixed

21 Forcing of CAN I/Os does not work new feature fixed

96 Function SysDirClose is missing new feature fixed

103 VAR_IN_OUT: Problem if BYTE- or WORD-Pointers are used

(WinCE-Targets)

bug fixed

152 Calling SetupTargetFirmware only works if the correct MXpro-Version is used

new feature fixed

256 Manual of library SysLibRtc_Add.lib is missing new feature fixed

257 Manual of library SysLib _Add.lib is missing new feature fixed

260 MXpro: Version for Windows-Vista new feature fixed

262 MXpro: Error in IO-Configuration for XN-PLC-CANOPEN bug fixed

263 MXpro: Doc. Lib-Contents has no reference to VxWorks new feature fixed

264 MXpro: actual Copyright-Dates and Version info (Splash-Screen) change fixed

265 MXpro: Startmenue: Link to XN-PLC-Hex-File bug fixed

266 MXpro: Doc-Directory Updates change fixed

267 CANopen: start-up takes more time if no slave is on the bus bug fixed

273 User manual for CANopen-Libraries (English) new feature fixed

275 User manual for FtpClient-Library (English) new feature fixed

276 User manual for FastIO_Lib-Library (English) new feature fixed

277 Integration of WinCE 5.0 in TargetFirmwareWinCE new feature fixed

282 MXpro Targets: Moving PLCConf-Directory change fixed

288 und afterwards causes ahigher PLC-Cycle time

bug fixed

289 User manual for Library Busdiag.lib new feature fixed

290 Implementation of Moeller EasyNet Protocol new feature fixed

303 MXpro crash after Project compare bug fixed

306 Relative path with subdirectories for compile-files not supported bug fixed

309 MXpro Targets: Name "Micro Innovation AG" replaced with"Micro Innovation"

change fixed

310 MXpro: Target-Installation for XCC-67x new feature fixed

312 MXpro RTS: Error message "SrvHandleDataTransfer:DOWNLOAD.SDB Error"

bug fixed

314 PLC Configuration: support for max. 100 CAN-nodes bug fixed

317 Online change failed: Program to large bug fixed

7/24/2019 m 003927

76/78

76

324 New OS change fixed

331 MXpro: Target-DLL (for the calling of SetupTargetFirmware) /easy-NET Configuration

new feature fixed

332 New CoDeSys Version change fixed

333 New CoDeSys Gateway-Server change fixed

335 New CoDeSys Online-Help change fixed

344 SymARTI: No Login-Check allowed (Login does not work forELAU-Targets)

bug fixed

349 Data type FILETIME is defined more than once bug fixed

351 Conflicting identifiers in Libraries NetVarUdp_LIB_V23.l ib andTcpUdpLib.lib

change fixed

353 XN-PLC-CANopen: dont delete PLC-Configuration on Target-

Change

change fixed

7/24/2019 m 003927

77/78

77

11.6.2

RTS WinCE V2.4.4


329 RTS WinCE: I/O-Config for Hilscher-Profibus-Driver does notwork with "Spec. Config"

bug fixed

225 SysLibDir.Lib: Problems with SysDirRename() andSysDirRemove() on WinCE 5.0

change fixed

268 RTS: System-Handles can be misused from the PLC-Program(TCP/IP, File) => Handle-protection in the PLC-RTS

new feature fixed

270 CANsync Library for WinC

m 003927

Documents

Transcript of m 003927