LUXAR - EuropTec Vehicle Display Glass® coated glass products – processes like normal display...

4
LUXAR ® Anti-reflective glass for Electronic Displays Marketing / 201407

Transcript of LUXAR - EuropTec Vehicle Display Glass® coated glass products – processes like normal display...

Page 1: LUXAR - EuropTec Vehicle Display Glass® coated glass products – processes like normal display glass (cutting – edge finishing – bonding ) is laminatable, thermal temperable,

LUXAR®Anti-reflective glass for Electronic Displays

Mar

ketin

g / 2

0140

7

Page 2: LUXAR - EuropTec Vehicle Display Glass® coated glass products – processes like normal display glass (cutting – edge finishing – bonding ) is laminatable, thermal temperable,

LUXAR® coated glass products – processeslike normal display glass (cutting – edgefinishing – bonding ) is laminatable, thermaltemperable, printable.

Available in various thicknesses and sizesand glass types.

LUXAR® glass substrate featuresmax. stock sheet size: 3210 x 1900 mm ( 126,3“ x 74,8“)thickness range: 2 mm – 12 mm

coated surface covered with protective film (TPF)

Thin glass option:standard sheet size: 1270 x 810 mm (50“ x 32“)tickness range: 0,5 mm – 1,6 mm

LUXAR® invisibility at its best

LUXAR®, a sputtered coated anti-reflective glass with reduced light reflection, is an innovative product of Glas Trösch.

With a reflection of < 0.5% per coated surface, mirror-like effects will be prohibited and therefo-re LUXAR® is almost invisible.

Seeing sharply and clearly, is more important than ever in a world of electronic displays, TV´s, monitors, digital signage, operating panels, inst-ruments and more.

Key Attributes � better legibility � greater contrast� colour neutrality� long durability

Application fields

When you need it!

Traffic

Electronics

Vehicle Displays

Digital Signage

Page 3: LUXAR - EuropTec Vehicle Display Glass® coated glass products – processes like normal display glass (cutting – edge finishing – bonding ) is laminatable, thermal temperable,

LUXAR® invisibility at its best

Technical and optical performance data

Reflectance vs. wavelength

Typical reflection and transmission performance (LUXAR® both sides coated, float 4 mm)

Light source CIE Labor D65, Zeiss Photospec-trometer LVM5. Light reflection measured at a 10 degrees angle of incidence.

Reflectance:R < 0,5% per coated surface( average < 0,35%)

Transmittance: ( float 3mm )T > 98,5% both sides coatedT > 94,4% single side coated

Reflectance colour of LUXAR coated glass, mea-sured at incidence value of 10 degrees,shall fall within these colour limits, illuminant D 65.

Durability & standards according:

Humidity: ISO 9022-2-14-07Temperature: ISO 9022-4Corrosion: ISO 9211-3Abrasion: ISO 9211-4-01-04Cheese cloth test: ISO 9211Adhesion: ISO 9211-4-02-03Solubility: ISO 9211-4-03-03

Reflectance colour space

CIE1931

Toys‘R‘Us, Times Square, New York, USA

Page 4: LUXAR - EuropTec Vehicle Display Glass® coated glass products – processes like normal display glass (cutting – edge finishing – bonding ) is laminatable, thermal temperable,

LUXAR®

Glas Trösch AG HY-TECH-GLASSIndustriestrasse 12CH-4922 BützbergPhone +41 (0)62 958 54 00, Fax +41 (0)62 958 53 [email protected]

www.luxar.ch / www.glastroesch.ch