LT14 “JUMBO” LASER - Metal and Steel Stockholder … IFC files (Tekla), STEP, IGES and X_T. •...
Transcript of LT14 “JUMBO” LASER - Metal and Steel Stockholder … IFC files (Tekla), STEP, IGES and X_T. •...
LT14“JUMBO” LASER
BEAMS • COLUMNS • HOLLOW SECTION
• SPLIT TEES • ANGLES • CHANNELS
Kloeckner Metals UK | Head Office
Valley Farm Road, Stourton, Leeds,
West Yorkshire, LS10 1SD
@KloecknerUK
Kloeckner Metals UK
Kloeckner Metals UK
t: 0113 254 0711
www.kloecknermetalsuk.com
shop.kloeckner.co.uk
• Latest generation of the machine is the cutting edge in large tube laser, processing up to 355mm round tube – 100KG/M.
• The LT14 is capable of processing hollow section but can also process beams, columns, split tees, angles, and channels.
• LT14 has a 4.5KW Rofin CO2 laser source with the ability to laser cut 20mm thick mild steel and weld prep 16mm thick mild
steel material up to 45 degrees.
• Shorter lead times – machine’s latest touch screen interface uses an operating system that is up to 30% faster than
previous versions.
• It is also programmed using the latest generation of Artube 3 CAD software which can now import full 3D models / assemblies
including IFC files (Tekla), STEP, IGES and X_T.
• Loading and unloading are 15.5m infeed and outfeed - first for an LT14 in the UK.
Advantages of the new LT14:
Kloeckner Metals UK is one of the few UK businesses capable of processing parts up to 355mm in diameter and weight up to
100kg/m. In addition to processing hollow section tubes, it can also process beams, columns, split tees, angles and channels.
LT14 “Jumbo” Laser Capabilities
Up to 355mm round tube
Weld preparation 16mm up to 45 degrees
4.5KW Rofin CO2 laser
20mm thick mild steel
Latest generation of Artube 3 CAD software
Max Round mm
355
Max Rectangle mm
300 x 200
Max Squaremm
250 x 250
Channel
300 x 100
Equal Angle mm
200 x 200
Unequal Angle mm
200 x 150
Universal Column
254 x 254
Universal Beam
305 x 165
Infeed/Outfeedm
15.5