LRS-102 Ver. 3.44– 2012 Slide 1

LRS-102General AvailabilityVersion 3.44

LRS-102 Ver. 3.44– 2012 Slide 2

Agenda

• Introduction• Product Overview• Applications • Feature Comparison• Product/Portfolio Value Proposition• Sales Tools On-Line• Ordering information• Summary

LRS-102 Ver. 3.44– 2012 Slide 3

AXCESS+ for Carriers

LRS-102 Ver. 3.44– 2012 Slide 4

Market Segments

LRS-102 Ver. 3.44– 2012 Slide 5

First Mile – Product Portfolio

LRS-102 Ver. 3.44– 2012 Slide 6

LRS-102 Introduction

• Central transparent rack solution for E1 and ETH connectivity over fiber and copper

• Single box solution for TDM and IP networks, reduce Opex & Capex

• RADview SNMP management for convenient and low-cost maintenance on PC or Unix (HPOV) platforms

LRS-102 Ver. 3.44– 2012 Slide 7

General Application

• Solution over copper - Up to 96 E1’s over copper (SHDSL/SHDSL.bis) together with 24 ETH ports

• Solution over fiber - Up to 196 E1’s over fiber together with 24 ETH ports

MetroEthernet

Optimux-34/Optimux-25

ETH

16 x E1PBX

Router

Optimux-106/Optimux-108

ETH

PBX

Router

E1/T1

Site n

Optimux-106/Optimux-108

ETH

PBX

Router

E1/T1

Site 1Remote Site

Remote Sites

PBX

4 x ETH

E1

ASMi-54/ASMi-54L

NMS

LRS-102

SHDSL.bis

Fiber (Up to 120 km)

Backup Link

SHDSL

ETH

POP

n x E1/T1&

n x ETH

ASMi-52

LRS-102 Ver. 3.44– 2012 Slide 8

Major Customers

Insurance & BanksPublic SafetyGovernmentUniversityMilitary

Energy, Oil/Gas, Pipeline Water, Mine

Highway, Railways, Airports, Motorway, Marine

City Carrier, Cellular, ISP, Alternative Carrier, Incumbent Carrier

LRS-102 Ver. 3.44– 2012 Slide 9

LRS-102 Introduction

• Central transparent rack solution for E1 and ETH connectivity over fiber and copper

• Single box solution for TDM and IP networks, reduce Opex & Capex

• RADview SNMP management for convenient and low-cost maintenance on PC or Unix (HPOV) platforms

LRS-102 Ver. 3.44– 2012 Slide 10

LRS-102 Physical View

4 U high19” wide

PS SlotsSystem redundancy & Flexibility: • Dual AC or DC (48V) hot-swappable power supplies (Optional)

System redundancy:• Dual common logic supported (Optional)

12 I/O Slots96 ASMi Modules

24 Optimux Modules

LRS-102 Ver. 3.44– 2012 Slide 11

Main Features

Features Description Customer Benefits

Single IP address • Enhances management by providing a single point of contact, using a single IP address, for the management of ASMi 54L/LRT remote units ‑connected to LRS 102 ‑

• Only one IP address is required to manage all remote ASMi 54L/LRT units connected to LRS 102 (rather than ‑ ‑tens of IP addresses required by a central solution without single IP support)

RADview-EMS management • Unified management system for the entire solution, including central and remote devices

• Single management platform lowers CapEx. Easy provisioning, detection and fixing of network faults reduces service downtime and lowers OpEx

Fiber and copper infrastructure support

• Single-box solution for both fiber and copper aggregation or termination

• Reduced number of units at the central site lowers OpEx and CapEx

Complete solution for TDM and Ethernet over fiber and copper

• The chassis accommodates up to 12 I/O modules supporting up to 24 Ethernet and up to 96 E1/T1 ports

• Grooming of underutilized lines optimizes bandwidth consumption and lowers CapEx by reducing the number of units at the central site

• Smooth migration path between legacy and next generation networks

Carrier grade redundancy and resilient links

• Redundant power supplies

• Hot-swappable, redundant uplinks

• Minimizing service downtime reduces OpEx

LRS-102 Ver. 3.44– 2012 Slide 12

LRS-102 – Current Supported Cards

• Copper cards– ASMi-54C/ETH/UTP or SFP– ASMi-54C/E1/N

• Fiber cards– Optimux-25/34C– Optimux-106/108C

LRS-102 Ver. 3.44– 2012 Slide 13

ASMi-54C/E1/ETH/N – New Card in Phase 3.3

• ASMi-54C/E1/ETH/N/PF– 8 E1 and 2 ETH configurable ports for 8 pairs SHDSL.bis– 2 x 10/100BaseT over copper or fiber– Dual bearer mode for E1 and ETH HDLC– Full management support

• PF Option – Optional remote power feeding by dual slot card– Enable 4 groups of 2W or 4W– 180Vdc powered over the lines

LRS-102 Ver. 3.44– 2012 Slide 14

TDM & ETH Services over SHDSL.bis Using ASMi-54C/E1/ETH/N

• Simple & cost effective solution for providing TDM & ETH Services • Single platform for copper and fiber solution with high port density• Single IP address for managing central device and remote CPEs• Low power consumption, smaller size

SHDSL.bis

Headquarters

PBX

Switch

n x E1

n x ETH

LAN

NMS

GbE

E1

FE

ASMi-52/ASMi-54/ASMi-54L

PBX

Router

IP/MPLS LRS-102

Branches

LRS-102 Ver. 3.44– 2012 Slide 15

ASMi-54C/ETH

• High density – 2 ETH ports over 8 SHDSL/SHDSL.bis lines – Up to 96 pairs of ETH EFM lines

• High Reliability – EFM bonding support in case of failure of one of

the DSL line• Advanced ETH performance

– QOS – queuing based on VLAN priority bit– Up to 8 user flows (based on VLAN)

• Single NMS platform – low Opex

LRS-102 Ver. 3.44– 2012 Slide 16

ASMi-54C/ETH – Physical View

DB-25 Connector for 8 pairs• Works opposite:

– 2 x ASMi-54/ASMi-54L – 8W– 4 x ASMi-54/ASMi-54L – 4W– 8 x ASMi-54/ASMi-54L – 2W

• With ETH Services

• Dual ports:– UTP – 10/100BaseT , RJ-45– Fiber - SFPs

LRS-102 Ver. 3.44– 2012 Slide 17

ASMi-54C/E1/N

• 8 E1 ports over 8 SHDSL/SHDSL.bis lines – High density, up to 96 E1 in central site, enables cost effective

solution in one platform– Each module work Opposite SHDSL or SHDSL.bis modem, enable to

offer the “right” price modem as per required modem performance/rate

• Single management point on the LRS-102– Simplify and reduced maintenance time and efforts of management

of each modem – EOC is supported for ASMi-52 remotes enable full management

connectivity and prevent the needs for special IP address at the remote site

LRS-102 Ver. 3.44– 2012 Slide 18

ASMi-54C/E1/N – Physical view

• SHDSL lines – DB-25 Connector for 8 pairs • Works opposite:

– 4 x ASMi-54/ASMi-54L/ ASMi-52/ASMi-52L - 4W– 8 x ASMi-54/ASMi-54L / ASMi-52/ASMi-52L - 2W

• E1 line – DB-44 Connector for 8 E1 port – Individual clock source, enable setting of different E1 clock source from different locations

LRS-102 Ver. 3.44– 2012 Slide 19

LRS-102 – Current Supported Cards

• Copper cards– ASMi-54C/ETH/UTP or SFP

– ASMi-54C/E1/N

• Fiber cards– Optimux-25/34C

– Optimux-106/108C

LRS-102 Ver. 3.44– 2012 Slide 20

Supported CardsLRS-102 Version 3.44

Product Technology Working Opposite Description

OP-108C Fiber optic Optimux-108, Optimux-108L

Dual multiplexer; 4E1 channels, with 100 Mbps Ethernet, fiber optic link redundancy option

OP-106C Fiber optic Optimux-106 Dual multiplexer combining 4T1 channels, with 75 Mbps Ethernet, fiber optic link redundancy option

OP-34C Fiber optic, Copper Optimux-34

16 E1 and Ethernet multiplexer, up to 16 independent E1 and one Fast Ethernet channel over a single optical or copper link, fiber optic/copper

link redundancy option

OP-25C Fiber optic Optimux-2516 T1 and Ethernet multiplexer, up to 16 independent T1 streams and

one Fast Ethernet channel over a single optical link, fiber optic link redundancy option

ASMi-54C SHDSL.bis ASMi-54/4ETH (2W,4W,8W) 16-wire, SHDSL.bis modem, two Ethernet 10/100BaseT ports, UTP or SFP

ASMi-54C/N SHDSL/SHDSL.bis

ASMi-54/ASMi-54L/ASMi-52/ ASMi-52L (2W / 4W for ETH and/or E1 services )

16-wire, SHDSL/SHDSL.bis modem, eight E1 ports and two optional Ethernet ports

LRS-102 Ver. 3.44– 2012 Slide 21

Typical Applications

• Complete solution over fiber and copper combination

• Service providers – City carrier

LRS-102 Ver. 3.44– 2012 Slide 22

E1s

GbE

Customer Needs• Centralized solution with management• Variety of access technologies and devices• Same equipment for both fixed and cellular networks

Customer Benefits

• Single management• Scalable solution• Unique solution: SHDSL concentrator with Gigabit Ethernet uplink

Megaplex-4100

Large PoP

IP/ETHNetwork

STM-1

ETH

ASMi-52LE1

ASMi-52LE1

ASMi-54L

ASMi-54L/RT

LAN

Small PoP

LRS-102

Cisco 7000

SHDSL

SHDSL

ETH

E1

E1

LAN

SHDSL

SHDSL

ETH

BSC

E1s

GSM Traffic GSM Traffic

Data TrafficData Traffic

Service Providers – City Carrier

ASMi-52L

ASMi-52L

ASMi-54L

ASMi-54L/RT

TDMNetwork

BTS

LAN

PC

BTS

BTS

BTS

PC

LAN

LRS-102 Ver. 3.44– 2012 Slide 23

ETH and TDM Connectivity Using any Media

• Reduced OPEX with single access link for multiple types of services and infrastructures

• Backhauling over any available access media (copper, fiber, wireless)• End-to-end connectivity solutions

Headquarters

RNC

BSC

TDM MP-4100/LRS-102

PSN n x ETHn x E1

n x E1

ASMi-5x

Fiber

Copper

4 x E1

4 x FE

OP-108L

Wireless

E1’s

FE

SHDSL.bis

Airmux-200Airmux-200

E1’s

FE

LRS-102 Ver. 3.44– 2012 Slide 24

Management

RADview-EMS is a unified carrier-class management platform for RAD devices using a variety of access channels as SNMPv1/3, HTTP/S, TFTP and Telnet/SSH.

In addition, it features third-party device monitoring capabilities

LRS-102 Ver. 3.44– 2012 Slide 25

Management, Benefits & Features

●Turnkey system including hardware and software!

●Fully compliant with TMN standards

●Client/server architecture with multi-user support

●Interoperable with third-party NMS and leading OSS systems

●IBM Tivoli’s Netcool®/OMNIbus™ plug-in

●Minimize integrations costs associated with new NE additions

Benefits Benefits

●Ensures device health and congestion control

●Topology maps and network inventory

●Advanced FCAPS functionality

●Software & configuration management

●Business continuity - High-Availability and Disaster Recovery

●Handover between operators

Key featuresKey features

LRS-102 Ver. 3.44– 2012 Slide 26

RADview-EMS Advanced FCAPS

LRS-102 Ver. 3.44– 2012 Slide 27

RADview-EMSFCAPS

●Manage Event Log parameters

●Manage the way Events are displayed in the Event Browser

●Manage system response upon occurrence of specific Events.

●Trap Synchronization upon connection failure between RADview-EMS to NE (*supported devices only)

●Modify – Mask, Severity, Duplication, Forwarding, Threshold, Clearing, Formatting

●Manage Event Log parameters

●Manage the way Events are displayed in the Event Browser

●Manage system response upon occurrence of specific Events.

●Trap Synchronization upon connection failure between RADview-EMS to NE (*supported devices only)

●Modify – Mask, Severity, Duplication, Forwarding, Threshold, Clearing, Formatting

Fault Configuration Administration Performance Security

LRS-102 Ver. 3.44– 2012 Slide 28

RADview-EMSFCAPS

●Realistic representation of the devices (shelf-view)

●Tracks configuration changes

●Configures, installs, and distributes software and configuration files across the network

●Viewing and/or modifying configuration (system, ports, and alarms)

●Enables viewing the diagnostics and status information

●Realistic representation of the devices (shelf-view)

●Tracks configuration changes

●Configures, installs, and distributes software and configuration files across the network

●Viewing and/or modifying configuration (system, ports, and alarms)

●Enables viewing the diagnostics and status information

Fault Configuration Administration Performance Security

Shelf-ViewShelf-View

WebWeb

LRS-102 Ver. 3.44– 2012 Slide 29

RADview-EMSFCAPS

●Audit trails for Security, System and Applications activities

●Tracks and log the shelf-view user activity

●Create and manage user accounts and groups

●Manage various server setting

●Audit trails for Security, System and Applications activities

●Tracks and log the shelf-view user activity

●Create and manage user accounts and groups

●Manage various server setting

Fault Configuration Administration Performance Security

Applications activitiesApplications activities

Security logsSecurity logs

LRS-102 Ver. 3.44– 2012 Slide 30

RADview-EMSFCAPS

●Monitors network performance (QoS, CoS)

●Current statistics (Real-time)

●Intervals statistics

●Reflects Agent statistics

●RADview statistics collector (*supported devices only)

●Collect and compress the data

●Retrieved lost data upon connection failure

●Minimizing management traffic

●Exports CSV ASCII files for OSS

●Monitors network performance (QoS, CoS)

●Current statistics (Real-time)

●Intervals statistics

●Reflects Agent statistics

●RADview statistics collector (*supported devices only)

●Collect and compress the data

●Retrieved lost data upon connection failure

●Minimizing management traffic

●Exports CSV ASCII files for OSS

Fault Configuration Administration Performance Security

StatisticsStatistics

LRS-102 Ver. 3.44– 2012 Slide 31

RADview-EMSFCAPS

●View and manage EMS Security profiles in a graphical interface.

●Create and edit security profiles.

●Create Common/Private view profiles per user/group

●Collects accounting data and generates network usage reports

●Define password policies

●View and manage EMS Security profiles in a graphical interface.

●Create and edit security profiles.

●Create Common/Private view profiles per user/group

●Collects accounting data and generates network usage reports

●Define password policies

Fault Configuration Administration Performance Security

Security profilesSecurity profiles

LRS-102 Ver. 3.44– 2012 Slide 32

Device Management

• RAD products support the following management capabilities

Device ManagementDevice Management

LRS-102 Ver. 3.44– 2012 Slide 33

Rack Name Card Supported Max.E1 Ports Max. ETH Ports ETH Performance

LRS-16

SHDSL, 2W ports 16 ports 2 ports for management N/A

LRS-102

SHDSL.bis , 2w,4w,8w portsFiber cards 96 ports 24 ports VLAN aware, VLAN

staking, stripping

LRS – Product Line Table

LRS-102 Ver. 3.44– 2012 Slide 34

First Mile – Value Proposition

LRS-102 Ver. 3.44– 2012 Slide 35

Ordering Information

Ordering Option Description

LRS-102/ACR/CL1R 12-slot modem rack with SNMP management, redundant AC power supply, redundant common logic module

LRS-102/DCR/CL1R 12-slot modem rack with SNMP management, redundant DC power supply, redundant common logic module

LRS-102/UNBAL/DCR/CL1 12-slot modem rack with SNMP management, Unbalanced E1 port, redundant DC power supply, Common Logic module

LRS-102/UNBAL/DCR/CL1R 12-slot modem rack with SNMP management, Unbalanced E1 port, redundant DC power supply, redundant common logic module

LRS-102/DCR/CL1 12-slot modem rack with SNMP management, redundant DC power supply, Common Logic module

LRS-102 Ver. 3.44– 2012 Slide 36

First Mile – Sales Tools

• Web Sites

• Brochures

LRS-102 Ver. 3.44– 2012 Slide 37

Sales Tools cont…

• Case Studies

• Application Notes:

LRS-102 Ver. 3.44– 2012 Slide 38

Sales Tools cont…

• Video

• Calculators

LRS-102 Ver. 3.44– 2012 Slide 39

Summary

• LRS-102 is a cost effective, managed and single platform for fiber and copper media

• This rack enable smooth migration from TDM network to IP thanks to multiplexer cards

• High port density over any SHDSL/SHDS.bis lines or fiber line enable connectivity of ETH and E1 services and reduce dramatically the price per link with a low OPEX investments

LRS-102 Ver. 3.44– 2012 Slide 40

Thank You For Your Attention

www.rad.com