LQ413 - Amazon S3

LUMINIS.COM

Luminaires may be altered for design improvement or discontinued without prior notice.

Toll free: 866.586.4647 Fax: 514.683.8872260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5

LUMINIS

Type: QUANTITy: prOjeCT:

CATALOgNUMber:

FIxTUre SUFFIx VOLTAge FINISh OpTION OpTION OpTION OpTION

Materialslumiquad bollard is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.LED is contained in a white UV stabilized high impact acrylic sealed cylinder. The assembly is designed to provide a uniform column illumination.

eleCtriCalDriVer Standard driver is 0-10V dimming-ready (dims to 10%) with:

120-277 multi-volt compatibility (50-60Hz), operating temperatures of -40ºC/-40ºF to 55ºC/131ºF, output over voltage protection,

output over current protection, output short circuit protection with auto-recovery.

leD Standard 4000K CCT/80 CRI. Optional 2700K, 3000K and 3500K.

liFe50,000hrs L

85B

50 (based on IESNA TM-21 Test Method and LM-80 data).

FiNisHFive-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish.

CertiFiCatioNTested to UL1598 and CSA 22.2 #250. ETL listed wet location.Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request.Rated IP65.

MouNtiNgMounts with a set of 4 x 3/8”-16 x 3 3/4” lg galvanized anchor bolts.

Ma

y 2

019

R

ev.0

lQ413/lQ423 SERIES lumiquad - leD

4” BOLLARD

1- Heavy cast aluminum top cover.2- Ø 4” (102) High impact white translucent acrylic

diffuser UV stabilized. Available acrylic heights include 12.7” (322) and 24.7” (627).

3- 4x extruded aluminum struts.4- Cast aluminum driver housing.5- 4” (102) x 4” (102) extruded aluminum square body.6- Cast aluminum mounting base.

1

LQ413

LQ4234-5

1

2

3

6

LQ41312.7”

[322 mm]

LQ42324.7”

[627 mm]

42”[1066 mm]

4”[102 mm]

3.7”[94 mm]

2”[51 mm]

3”[76.2 mm]

BOLT CIRCLE

4 x 3/8”-16 BOLTS @ 90°

LUMINIS.COM



LUMINIS

2

Ma

y 2

019

R

ev.0

oPtioNs (Refer to page 3 for details)

Notes1- If no voltage is specified, luminaires are factory prewired by default for 120V.

For other voltages, please specify with catalog number, or consult factory.2- GFI and CGF options are installed 18” above grade unless otherwise specified. CGF cover protrudes by 3.62” (92). 120V required for GFI or CGF.3- REML2-50 not compatible with PH (photocell).

ELECTRICAL

Fs Fuse

sP Surge protector 10KV

PH Photocell

reMl2-50 Remote mount battery backup (7W / 90 min.).

Remote mount to 50FT. 12” square enclosure with access cover.3


staNDarD Colors

WHT Snow white BKT Jet black BZT Bronze MST Matte silver GRT Titanium gray DGT Gun metal CHT Champagne

oPtioNal Colors

CS Custom color RAL RAL# color

(Refer to color chart)

120V 277V

Optional 347V 480V

VOLTAGE 1 FINISHMODEL# LED LIGHT SELECTION (4000K/80CRI)

luMiNaire seleCtioN

Please visit our web site www.luminis.com for complete I.E.S. formatted download data.

tYPiCal PHotoMetrY suMMarY

LIGHT

Alternate CCT ºK LED (LCF: Lumen conversion factor)

K27 2700K CCT 80 CRI (LCF: 0.91)

K3 3000K CCT 80 CRI (LCF: 0.94)

K35 3500K CCT 80 CRI (LCF: 0.98)

ACCESSORIES

gFi Ground fault circuit interruption flush receptacle (LQ413 only)2

CgF Ground fault circuit interruption with clear in-use cover (LQ413 only)2

BlC1 Blockout shield (one side)

BlC2 Blockout shield (two sides, installed at 90°)

BlC3 Blockout shield (three sides)

DeCo1 Decorative shroud

NOTE: Other CCT & higher CRI available, please consult factory.

lQ423

Descriptive information

LQ413-L4L20Total Lms: 2099 Lumens Total Input Watts: 19,7 WEfficacy: 106,6 Lumens/WattBUG: B1-U4-G2 CCT/CRI: 4000K/80Maximum Candela: 239 @ 37.5°H/85°V

1

2



1

2

SuFFIx INPuT WATTS DELIVERED LuMENS LuMEN / FT

L4L6 8W 857 857 L4L9 10W 1064 1064 L4L14 15W 1478 1478 L4L20 20W 2099 2099


L4L12 11W 1271 636 L4L18 17W 1921 961 L4L28 27W 2956 1478 L4L40 40W 4198 2099

lQ413

LUMINIS.COM



LUMINIS


oPtioNs

3

Ma

y 2

019

R

ev.0

DECO1Decorative shroud. 20% light transmission.

BLCBlockout shield available on up to three sides.

aCCessories

LUMINIS.COM



LUMINIS


CATALOgNUMber:

FIxTUre SUFFIx COLUMN VOLTAge FINISH OpTION OpTION OpTION

Materialslumiquad column is made of 6061-T6 extruded aluminum alloy. All other parts are made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.LED is contained in a white UV stabilized high impact acrylic sealed cylinder. The assembly is designed to provide a uniform column illumination.





liFe50,000hrs L

85B




MouNtiNgLumiquad column is designed for ease of access and installation. The castaluminum base plate is secured with a set of (4) 1/2”-13 x 18” LG galvanizedanchor bolts.

Ma

y 2

019

R

ev.0


4” COLUMN

1

LumiStick

LQ420 / LQ440

4-5

1

2

3

1- Heavy cast aluminum top cover.2- Ø 4” (102) High impact white translucent

acrylic diffuser UV stabilized. Available acrylic heights include 24.7” (627) and 48.7” (1236).

3- 4x extruded aluminum struts.4- Cast aluminum driver housing.5- 4” (102) x 4” (102) extruded aluminum

square body.

LQ42024.7”

[627 mm]

LQ44048.7"

[1236 mm]

LQ42027.5 in

[697 mm]

LQ440 51.5"

[1307 mm]

4”[102 mm]

LUMINIS.COM



LUMINIS

2

Ma

y 2

019

R

ev.0

oPtioNs (Refer to page 3 for details)

Notes1- If no voltage is specified, luminaires are factory prewired by default for

120V. For other voltages, please specify with catalog number, or consult factory.

2- GFI and CGF options are installed 18” above grade unless otherwise specified. CGF cover protrudes by 3.62” (92). 120V required for GFI or CGF.

ELECTRICAL


staNDarD Colors


oPtioNal Colors



120V 277V

Optional 347V 480V


luMiNaire seleCtioN



LIGHT


K27 2700K CCT 80 CRI (LCF: 0.91)

K3 3000K CCT 80 CRI (LCF: 0.94)

K35 3500K CCT 80 CRI (LCF: 0.98)

SuFFIx INPuT DELIVERED LuMEN / FT WATTS LuMENS

L4L12 11W 1271 636 L4L18 17W 1921 961 L4L28 27W 2956 1478 L4L40 39W 4109 2055

L8L24 22W 2572 643 L8L36 34W 3843 961 L8L56 53W 5853 1463 L8L80 78W 8188 2047

ACCESSORIES

gFi Ground fault circuit interruption flush receptacle2

CgF Ground fault circuit interruption with clear in-use cover2





MsD Motion sensor device (high/low 25%).

255° coverage.

Installed at 180° from hand hole.

120/277VAC, 50/60Hz (or 230VAC, 50Hz).


POLE FOR LQ420 LQ440

LQP469 96” 120” LQP493 120” 144” LQP4117 144” 168” LQP4141 168” N/A

OAH COLuMN SELECTION



1

2



1

2

LQ420

LQ440

lQ420 lQ440

Fs Fuse


PH Photocell

LUMINIS.COM



LUMINIS


oPtioNs

Ma

y 2

019

R

ev.0

3

aCCessories



MouNtiNg iNForMatioN

2.8 in[71.1 mm]

3.7 in[94 mm]

ANCHOR BOLTPROJECTIONABOVE FINISHEDGRADE.

Ø 8.3”[211 mm] 15°

4”[101.6 mm]

9.1”[232 mm]

COLUMN ISSECURED WITH A SET OF (4) 1/2”-13 X 18” LG GALVANIZED ANCHOR BOLTS

MSD

Motion sensor device (high/low 25%).

255° coverage.


120/277VAC, 50/60Hz

(or 230VAC, 50Hz).

[76.2 mm]3”

3.89”[98.9 mm]

[101.6 mm]4”

LUMINIS.COM



LUMINIS


CATALOgNUMber:


Materialslumiquad column is made of 6061-T6 extruded aluminum alloy. All other parts are made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.





liFe60,000hrs L

70B


Up to 70,000hrs L70

B50

(calculated projection from LM-80 data).



MouNtiNgLumiquad column is designed for ease of access and installation. The castaluminum base plate is secured with a set of (4) 1/2”-13 x 18” LG galvanizedanchor bolts.

Ma

y 2

019

R

ev.0

lQ421 SERIES lumiquad - leD

4” COLUMN

1- Cast aluminum top cover.2- Optical system assembly.3- 4x extruded aluminum struts.4- Cast aluminum driver housing.5- 4” (102) x 4” (102) extruded aluminum square body.

1

LumiStick

LQ421

4-5

1

2

3

LQ421

27.4”[696 mm]

24.7”[627 mm]

4”[102 mm]

LUMINIS.COM



LUMINIS

2

Ma

y 2

019

R

ev.0

oPtioNs

ELECTRICAL

Fs Fuse


PH Photocell


staNDarD Colors

WHT Snow whiteBKT Jet blackBZT BronzeMST Matte silverGRT Titanium grayDGT Gun metalCHT Champagne

oPtioNal Colors

CS Custom colorRAL RAL# color


120V 277V

Optional 347V 480V


luMiNaire seleCtioN

lQ421



LIGHT


K27 2700K CCT 80 CRI (LCF: 0.91)

K3 3000K CCT 80 CRI (LCF: 0.94)

K35 3500K CCT 80 CRI (LCF: 0.98)ACCESSORIES



BlC1 Blockout shield (one side)3

BlC2 Blockout shield (two sides, installed at 90°)4

BlC3 Blockout shield (three sides)4

lVr Glare control louvers provided with a 90° lens


255° coverage.


120/277VAC, 50/60Hz (or 230VAC, 50Hz).


POLE FOR LQ420

LQP469 96” LQP493 120” LQP4117 144” LQP4141 168”

OAH COLUMN SELECTION

SUFFIx INPUT WATTS DELIVERED LUMENS

L1L10-R2 12W 1159L1L20-R2 25W 2184L1L30-R2 38W 3100

L1L10-R5 14W 1039L1L20-R5 31W 2078L1L30-R5 51W 3034

type ii

type V


LQ421-L1L30-R2Total Lms: 3100 Lumens Total Input Watts: 37,4 WEfficacy: 82,8 Lumens/WattBUG: B1-U0-G1 CCT/CRI: 4000K/80Maximum Candela: 2458 @ 55°H/29°V

1

2


LQ421-L1L30-R5Total Lms: 3034 Lumens Total Input Watts: 50,9 WEfficacy: 59,6 Lumens/WattBUG: B1-U0-G1 CCT/CRI: 4000K/80Maximum Candela: 1134 @ 19.5°H/55°V

1

2


For other voltages, please specify with catalog number, or consult factory.2- GFI and CGF options are installed 18” above grade unless otherwise

specified. CGF cover protrudes by 3.62” (92). 120V required for GFI or CGF.3- BLC1 installed on back side when distribution Type II is selected.4- BLC2 and BLC3 not available with distribution type II.

LUMINIS.COM



LUMINIS


oPtioNs

Ma

y 2

019

R

ev.0

aCCessories

3

aCCessories

LVRGlare control louvers.

MSD


255° coverage.


120/277VAC, 50/60Hz

(or 230VAC, 50Hz).



[76.2 mm]3”

3.89”[98.9 mm]

[101.6 mm]4”

2.8 in[71.1 mm]

3.7 in[94 mm]

ANCHOR BOLTPROJECTIONABOVE FINISHEDGRADE.

Ø 8.3”[211 mm] 15°

4”[101.6 mm]

9.1”[232 mm]

COLUMN ISSECURED WITH A SET OF (4) 1/2”-13 X 18” LG GALVANIZED ANCHOR BOLTS

LUMINIS.COM



LUMINIS


CATALOgNUMber:


Materialslumiquad bollard is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.




leD Standard 4000K CCT/80 CRI. Optional 2700K, 3000K and 3500K. .

liFe60,000hrs L

70B


Up to 70,000hrs L70

B50



CertiFiCatioNTested to UL1598 and CSA 22.2 #250. ETL listed wet location.Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request.IP65.

MouNtiNgMounts with a set of 4 x 3/8”-16 x 3 3/4” lg galvanized anchor bolts.

Ma

y 2

019

R

ev.0


4” BOLLARD

1- Heavy cast aluminum top cover.2- Optical system assembly.3- 4x extruded aluminum struts.4- Cast aluminum driver housing.5- 4” (102) x 4” (102) extruded aluminum square body.6- Cast aluminum mounting base.

1

LumiStick

LQ427

4-5

1

2

3

6

4”[102 mm]

24.7”[627 mm]

LQ427

42”[1066 mm]

3.7”[94 mm]

2”[51 mm]

3”[76.2 mm]

BOLT CIRCLE

4 x 3/8”-16 BOLTS @ 90°

LUMINIS.COM



LUMINIS

2

Ma

y 2

019

R

ev.0

oPtioNs

Notes1- If no voltage is specified, luminaires are factory prewired by default for 120V. For other voltages, please specify with catalog number, or consult factory.2- REML2-50 not compatible with PH (photocell).3- BLC1 installed on back side when distribution Type II is selected.4- BLC2 and BLC3 not available with distribution type II.

ELECTRICAL

Fs Fuse


PH Photocell

reMl2-50 Remote mount battery backup (7W / 90 min.). Remote mount to 50FT. 12” square enclosure with access cover.2


staNDarD Colors


oPtioNal Colors



120V 277V

Optional 347V 480V


luMiNaire seleCtioN

lQ427



LIGHT


K27 2700K CCT 80 CRI (LCF: 0.91)

K3 3000K CCT 80 CRI (LCF: 0.94)

K35 3500K CCT 80 CRI (LCF: 0.98)

ACCESSORIES







LQ427-L1L20-R2Total Lms: 2211 Lumens Total Input Watts: 24,7 WEfficacy: 89,3 Lumens/WattBUG: B1-U0-G1 CCT/CRI: 4000K/80Maximum Candela: 1753 @ 55°H/29°V

1

2


LQ427-L1L20-R5Total Lms: 2078 Lumens Total Input Watts: 31,3 WEfficacy: 66,3 Lumens/WattBUG: B1-U0-G1 CCT/CRI: 4000K/80Maximum Candela: 777 @ 19.5°H/55°V

1

2

SuFFIx INPuT WATTS DELIVERED LuMENS

L1L10-R2 14W 1186 L1L20-R2 31W 2211

L1L10-R5 14W 1039 L1L20-R5 31W 2078

type ii

type V

LUMINIS.COM



LUMINIS



oPtioNs

Ma

y 2

019

R

ev.0

3

aCCessoriesaCCessories


LUMINIS.COM



LUMINIS


CATALOgNUMber:


Materialslumiquad bollard is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.LED is contained in a white UV stabilized high impact acrylic sealed cylinder. The assembly is designed to provide a uniform column illumination.





liFe50,000hrs L

85B




MouNtiNgMounts with a set of 4 x 1/2”-13 x 18” lg galvanized anchor bolts.

Ma

y 2

019

R

ev.0


6” BOLLARD

1- Heavy cast aluminum top cover.2- Ø 6” (152) High impact white translucent acrylic

diffuser UV stabilized. Available acrylic heights include 12.7 (322) and 24.7” (627).

3- 4x extruded aluminum struts.4- Cast aluminum driver housing.5- 6” (152) x 6” (152) extruded aluminum square body.6- Cast aluminum mounting base.

1

LumiStick

LQ613

LQ623

4-5

1

2

3

6

LQ61312.7”

[322 mm]

LQ62324.7”

[627 mm]

42”[1066 mm]

6”[152 mm]

5.7”[144.8 mm]

2.5”[64 mm]

4.25”[108 mm]

BOLT CIRCLE

4 x 1/2”-13 BOLTS @ 90°

LUMINIS.COM



LUMINIS

2

Ma

y 2

019

R

ev.0

oPtioNs

Notes1- If no voltage is specified, luminaires are factory prewired by default for 120V. For other voltages, please specify with catalog number, or consult factory.2- GFI and CGF options are installed 18” above grade unless otherwise specified. CGF cover protrudes by 3.62” (92). 120V required for GFI or CGF.3- REML2-50 not compatible with PH (photocell).

ELECTRICAL

Fs Fuse


PH Photocell



staNDarD Colors


oPtioNal Colors



120V 277V

Optional 347V 480V


luMiNaire seleCtioN



LIGHT


K27 2700K CCT 80 CRI (LCF: 0.91)

K3 3000K CCT 80 CRI (LCF: 0.94)

K35 3500K CCT 80 CRI (LCF: 0.98)

ACCESSORIES

gFi Ground fault circuit interruption flush receptacle (LQ613 only)2

CgF Ground fault circuit interruption with clear in-use cover (LQ613 only)2






lQ623

lQ613



1

2


LQ623-L4L40Total Lms: 4251 Lumens Total Input Watts: 39 WEfficacy: 109 Lumens/WattBUG: B1-U5-G3 CCT/CRI: 4000K/80Maximum Candela: 488 @ 47.5°H/85°V

1

2


L4L6 8W 859 859 L4L9 10W 1085 1085 L4L14 14W 1537 1537 L4L20 19W 2171 2171 L4L26 26W 2713 2713


L4L12 11W 1311 656 L4L18 17W 1990 995 L4L28 25W 2849 1425 L4L40 39W 4251 2126

LUMINIS.COM



LUMINIS




oPtioNs

3

Ma

y 2

019

R

ev.0


LUMINIS.COM



LUMINIS


CATALOgNUMber:

FIxTUre SUFFIx COLUMN VOLTAge FINISH OpTION OpTION OpTION

Materialslumiquad column is made of 6061-T6 extruded aluminum alloy. All other parts are made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.LED is contained in a white UV stabilized high impact acrylic sealed cylinder. The assembly is designed to provide a uniform column illumination.





liFe50,000hrs L

85B




MouNtiNgLumiquad column is designed for ease of access and installation. For overall heights of 96” (8FT) to 168” (14FT): The cast aluminum base plate is secured with a set of (4) 1/2”-13 x 18” LG galvanized anchor bolts.For overall heights above 168” (14FT): The cast aluminum base plate is secured with a set of (4) 3/4”-10 x 18” LG galvanized anchor bolts.Accessibility is done through a flush mount 2”X4” (100X178) hand hole cover plate.

Ma

y 2

019

R

ev.0

lQ620/lQ640/lQ670 SERIES lumiquad - leD

6” COLUMN

1- Heavy cast aluminum top cover.2- Ø 6” (152) High impact white translucent

acrylic diffuser UV stabilized. Available acrylic heights include 24.7” (696), 48.7” (1236) and 72.7 (1847).

3- 4x extruded aluminum struts.4- Cast aluminum driver housing.5- 6” (152) x 6” (152) extruded aluminum

square body.

1

LumiStick

LQ620 / LQ640 / LQ670

4-5

1

2

3

LQ62024.6”

[625 mm]

LQ64048.7”

[1236 mm]

LQ67072.6”

[1845 mm]

LQ62027.4”

[696 mm]

LQ64051.4”

[1306 mm]

LQ67075.4”

[1915 mm]

6”[152 mm]

LUMINIS.COM



LUMINIS

2

Ma

y 2

019

R

ev.0


For other voltages, please specify with catalog number, or consult factory.2- GFI and CGF options are installed 18” above grade unless otherwise specified. CGF cover protrudes by 3.62” (92). 120V required for GFI or CGF.


oPtioNsELECTRICAL

staNDarD Colors


oPtioNal Colors



120V 277V

Optional 347V 480V


luMiNaire seleCtioN

LIGHT

Alternate CCT ºK LED (LCF: Lumen conversion factor) K27 2700K CCT 80 CRI (LCF: 0.91) K3 3000K CCT 80 CRI (LCF: 0.94) K35 3500K CCT 80 CRI (LCF: 0.98)

ACCESSORIES

gFi Ground fault circuit interruption flush receptacle2 CgF Ground fault circuit interruption with clear in-use cover2

BlC1 Blockout shield (one side) BlC2 Blockout shield (two sides, installed at 90°) BlC3 Blockout shield (three sides) DeCo1 Decorative shroud


255° coverage.


120/277VAC, 50/60Hz (or 230VAC, 50Hz).


POLE FOR LQ620 LQ640 LQ670

LQP669 96” 120” 144” LQP693 120” 144” 168” LQP6117 144” 168” 192” LQP6141 168” 192” 216” LQP6165 192” 216” 240”

SuFFIx INPuT DELIVERED LuMEN / FT WATTS LuMENS




LQ620

LQ640

LQ670

OAH COLuMN SELECTION

lQ620 lQ640 lQ670





1

2



1

2


LQ670-L12L156Total Lms: 15737 Lumens Total Input Watts: 150 WEfficacy: 104,9 Lumens/WattBUG: B3-U5-G5 CCT/CRI: 4000K/80Maximum Candela: 1806 @ 47.5°H/85°V

1

2

Fs Fuse


PH Photocell

LUMINIS.COM



LUMINIS


oPtioNs

3

Ma

y 2

019

R

ev.0


aCCessories



2.8”[71.1 mm]

2.8”[71.1 mm]

18.0”[457.2 mm]

6.0”[152.4 mm]

Ø 2.5”[63.5 mm]

Ø 4.25”[108 mm]

Ø 6”[152.4 mm]

Ø 12”[304.8 mm]

15°

12.63”[320.8 mm]

3.5”[88.9 mm]

18.0”[457.2 mm]

FOR HEIGHTS ABOVE 168” (14FT) THROUGH 240” (20 FT), COLUMN IS SECURED WITH A SET OF (4) 3/4”-10 X 18” LG

GALVANIZED ANCHOR BOLTS

COLUMN IS SECURED WITH A SET OF (4) 1/2”-13 X 18” LG


2.8”[71.1 mm]

2.8”[71.1 mm]

18.0”[457.2 mm]

6.0”[152.4 mm]

Ø 2.5”[63.5 mm]

Ø 4.25”[108 mm]

Ø 6”[152.4 mm]

Ø 12”[305 mm]

15°

12.6”[321 mm]

3.7”[91 mm]

18.0”[457.2 mm]





OVERALL HEIGHTS FROM 96” (8FT) TO 168” (14FT) OVERALL HEIGHTS ABOVE 168” (14FT)

MSD


255° coverage.


120/277VAC, 50/60Hz

(or 230VAC, 50Hz).

[98.9 mm]3.89”

6”

[152.4 mm]

[101.6 mm]4”

LUMINIS.COM



LUMINIS


CATALOgNUMber:


Materialslumiquad bollard is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.




leD Standard 4000K CCT/80 CRI. Optional 2700K, 3000K and 3500K. .

liFe60,000hrs L

70B


Up to 70,000hrs L70

B50




MouNtiNgMounts with a set of 4 x 1/2”-13 x 18” lg galvanized anchor bolts.

Ma

y 2

019

R

ev.0


6” BOLLARD

1- Heavy cast aluminum top cover.2- Optical system assembly.3- 4x extruded aluminum struts.4- Cast aluminum driver housing.5- 6” (152) x 6” (152) extruded aluminum square body.6- Cast aluminum mounting base.

1

LumiStick

LQ627

4-5

1

2

3

6

6”[152 mm]

LQ627

24.7”[627 mm]

42”[1066 mm]

5.7”[144.8 mm]

2.5”[64 mm]

4.25”[108 mm]

BOLT CIRCLE

4 x 1/2”-13 BOLTS @ 90°

LUMINIS.COM



LUMINIS

2

Ma

y 2

019

R

ev.0

oPtioNs

Notes1- If no voltage is specified, luminaires are factory prewired by default for 120V. For other voltages, please specify with catalog number, or consult factory.2- REML2-50 not compatible with PH (photocell).3- BLC1 installed on back side when distribution Type II is selected.4- BLC2 and BLC3 not available with distribution type II.

ELECTRICAL

Fs Fuse


PH Photocell



staNDarD Colors

WHT Snow whiteBKT Jet blackBZT BronzeMST Matte silverGRT Titanium grayDGT Gun metalCHT Champagne

oPtioNal Colors

CS Custom colorRAL RAL# color


120V 277V

Optional 347V 480V


luMiNaire seleCtioN

lQ627



LIGHT


K27 2700K CCT 80 CRI (LCF: 0.91)

K3 3000K CCT 80 CRI (LCF: 0.94)

K35 3500K CCT 80 CRI (LCF: 0.98)

ACCESSORIES







LQ627-L1L30-R2Total Lms: 3251 Lumens Total Input Watts: 31,1 WEfficacy: 104,6 Lumens/WattBUG: B1-U0-G1 CCT/CRI: 4000K/80Maximum Candela: 2407 @ 55°H/42.5°V

1

2



1

2

SuFFIx INPuT WATTS DELIVERED LuMENS

L1L10-R2 10W 1203L1L20-R2 19W 2081L1L30-R2 32W 3251

L1L10-R5 13W 1204L1L20-R5 23W 2134L1L30-R5 36W 3146

type ii

type V

LUMINIS.COM



LUMINIS


oPtioNs

Ma

y 2

019

R

ev.0

3




LUMINIS.COM



LUMINIS


CATALOgNUMber:


Materialslumiquad column is made of 6061-T6 extruded aluminum alloy. All other parts are made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.





liFe60,000hrs L

70B


Up to 70,000hrs L70

B50




MouNtiNgLumiquad column is designed for ease of access and installation. For overall heights of 96” (8FT) to 168” (14FT): The cast aluminum base plate is secured with a set of (4) 1/2”-13 x 18” LG galvanized anchor bolts.For overall heights above 168” (14FT): The cast aluminum base plate is secured with a set of (4) 3/4”-10 x 18” LG galvanized anchor bolts.Accessibility is done through a flush mount 2”X4” (100X178) hand hole cover plate.

Ma

y 2

019

R

ev.0


6” COLUMN

1- Cast aluminum top cover.2- Optical system assembly.3- 4x extruded aluminum struts.4- Cast aluminum driver housing.5- 6” (152) x 6” (152) extruded aluminum square body.

1

LumiStick

LQ641

4-5

1

3

2

6”[152 mm]

LQ641

51.4”[1306 mm]

48.7”[1236 mm]

LUMINIS.COM



LUMINIS

2

Ma

y 2

019

R

ev.0

oPtioNs


For other voltages, please specify with catalog number, or consult factory.2- GFI and CGF options are installed 18” above grade unless otherwise

specified. CGF cover protrudes by 3.62” (92). 120V required for GFI or CGF.3- BLC1 installed on back side when distribution Type II is selected.4- BLC2 and BLC3 not available with distribution type II.

ELECTRICAL


staNDarD Colors


oPtioNal Colors



120V 277V

Optional 347V 480V


luMiNaire seleCtioN

lQ641



LIGHT


K27 2700K CCT 80 CRI (LCF: 0.91)

K3 3000K CCT 80 CRI (LCF: 0.94)

K35 3500K CCT 80 CRI (LCF: 0.98)ACCESSORIES








255° coverage.


120/277VAC, 50/60Hz (or 230VAC, 50Hz).


OAH COLUMN SELECTION



1

2



1

2

POLE FOR LQ641

LQP669 120” LQP693 144” LQP6117 168” LQP6141 192” LQP6165 216”

SUFFIx INPUT WATTS DELIVERED LUMENS

L1L15-R2 14W 1626 L1L25-R2 25W 2666 L1L50-R2 56W 5137

L1L15-R5 17W 1614 L1L25-R5 29W 2627 L1L50-R5 69W 5144

type ii

type V

Fs Fuse


PH Photocell

LUMINIS.COM



LUMINIS


oPtioNs

3

Ma

y 2

019

R

ev.0

aCCessories




MSD


255° coverage.


120/277VAC, 50/60Hz

(or 230VAC, 50Hz).

[98.9 mm]3.89”

6”

[152.4 mm]

[101.6 mm]4”

2.8”[71.1 mm]

2.8”[71.1 mm]

18.0”[457.2 mm]

6.0”[152.4 mm]

Ø 2.5”[63.5 mm]

Ø 4.25”[108 mm]

Ø 6”[152.4 mm]

Ø 12”[304.8 mm]

15°

12.63”[320.8 mm]

3.5”[88.9 mm]

18.0”[457.2 mm]





2.8”[71.1 mm]

2.8”[71.1 mm]

18.0”[457.2 mm]

6.0”[152.4 mm]

Ø 2.5”[63.5 mm]

Ø 4.25”[108 mm]

Ø 6”[152.4 mm]

Ø 12”[305 mm]

15°

12.6”[321 mm]

3.7”[91 mm]

18.0”[457.2 mm]





OVERALL HEIGHTS FROM 96” (8FT) TO 168” (14FT) OVERALL HEIGHTS ABOVE 168” (14FT)

LQ413 - Amazon S3

Documents

Transcript of LQ413 - Amazon S3