http://www.lpslabs.com/index

CARBON REMOVERSRemoves carbon buildup that may cause damage to your weapon and impair proper functioning.

LST Penetrant

■ Penetrates quickly to free stubborn parts

■ Displaces moisture ■ resists oxidation and varnish

formation ■ Inverta Spray Valve

apply directly on frozen or rusted parts. LSt will foam, attacking the rust and corrosion to free the parts. In areas of extreme carbon buildup, simply spray and let soak until parts are free. Continue with cleaning as usual.

net Content Part #11 wt. oz./312 g/382 mL 01916

Also available in 1, 5, and 55 gallon sizes.

LPS 1® GreaSeLeSSLUBrICant& WeaPOn WIPe

■ removes carbon build-up that other lubricants can not

■ Displaces moisture ■ removes contaminants ■ resists oxidation and varnish

formation ■ Inverta Spray Valve

apply product by spraying directly on firearm, soaking, or using the LPS 1® Weapon Wipe. Product will go on wet, dries in approximately 30 minutes, leaving a dry lubricating film. In areas of carbon buildup apply LPS 1® generously, let soak or clean with brush/patch. Wipe away excess to leave a thin protective film. LPS 1® is safe to use on all gun surfaces, and conditions metal to help resist future fouling.

net Contents Part #7” x 10” wipe 0014411 wt. oz./312 g/379 mL 00116

Also available in trigger, 1, 5, and 55 gallon sizes.

LPS 1® & LST CAN BE APPLIED TO THE FOLLOWING:

all parts including:BOLt CarrIer BOreBUFFer tUBeCYLInDerFraMeInternaL COMPOnentS OF UPPer anD LOWer reCeIVerMaGaZIneMaG WeLLSPInSSLIDeSPrInGS trIGGer COMPOnentS

LPS 1® WeaPOn WIPe

■ Cleans, lubricates, and protects

■ Displaces moisture ■ resists oxidation and varnish

formation

net Content Part #7” x 10” wipe 00144

Also available in aerosol, trigger, 1, 5, and 55 gallon sizes.

MICRO-X* FaSt eVaPOratInG COntaCt CLeaner

■ Will not damage polymer-based weapons

■ Low odor ■ Flushing action cleaner ■ Inverta Spray Valve

net Content Part #11 wt. oz./312g/466mL 04516

Also available in 55 gallon size.

PSC*PLaStIC SaFe CLeaner

■ 100% plastic safe cleaner ■ Will not damage polymer-

based weapons/accessories ■ Flushing action cleaner ■ non-flammable

net Content Part #18 wt. oz./510 g/412 mL 04620

QB PreCISIOn DUSter

■ Quick blast precision duster removes contaminants, dirt, dust, and other soils

■ Moisture free ■ Ideal for maintaining

precision optics ■ removes dry contaminants ■ non-flammable

net Content Part #12 wt. oz./340 g/281 mL 05710

FIREARMS SURFACE CLEANERSYour firearms require a cleaner that blasts away powder residue, carbon, grease, and oil build-up, leaving the firearm clean and ready for lubrication. Products recommended for the firearms manufacturer.

PRECISION CLEAN*MULtI-PUrPOSe CLeaner/DeGreaSer

■ Water-base cleaner ■ removes contaminants

including fingerprint salts ■ rinses clean

net Content Part #28 fl. oz. (828 mL) trigger 02728

Also available in Ready-to-use aerosol, 55 gallon. In concentrate in 1, 5, and 55 gallon sizes.

*To prevent flash rusting CFC Free, Micro-X,

Precision Clean, and PSC all will need a coat of LPS 1® after flushing.

CFC FREE* eLeCtrO COntaCt CLeaner

■ no chlorinated solvents ■ no residue ■ Cleans completely ■ Flushing action cleaner

net Content Part #11 wt. oz./312 g/465 mL 03116

Also available in 1, 5, and 55 gallon sizes.

LPS 1® - THE uLTIMATE WEAPON MAINTENANCE PRODuCT

CLean, LUBrICate, and PrOteCt now in an easy to use, transportable and disposable package.

YOUR FIREARMS IN STORAGEIdeal to protect your firearms from humidity

that may cause rust and corrosion, and damage.

*Apply to clean, dry weapon and/or accessories. Allow solvents to evaporate before placing treated weapon in storage.

LPS 3®* PreMIer rUSt InhIBItOr

■ Soft waxy film protects and prevents metal from corrosion during long term storage

net Content Part #11 wt. oz./312 g/380 mL 00316

Also available in trigger, 1, 5, and 55 gallon sizes.

easily removed with a-151 or PreSolve®. available thru your local LPS® industrial supplier. For use on metal parts only.

LPS 2®*heaVY-DUtY LUBrICant

■ Coats and lubricates internal parts to prevent binding

■ Goes on wet and stays wet ■ Provides corrosion protection ■ Protects for up to 12 months

in storage

net Content Part #11 wt. oz./312 g/369 mL 00216

Also available in trigger, 1, 5, and 55 gallon sizes.

Does not require removal before gun use.

LPS 1®*GreaSeLeSSLUBrICant& WeaPOn WIPe

■ Safe on case hardening, bluing, military coatings and plastics

■ reduces wear caused by friction and corrosion

■ Displaces moisture ■ Conditions metal surfaces ■ Does not attract dust ■ Short term protection

net Contents Part #7” x 10” wipe 0014411 wt. oz./312 g/379 mL 00116

Also available in trigger, 1, 5, and 55 gallon sizes.

DuRATION OF INDOOR PROTECTION AGAINST CORROSION

MOnthS24

12

3

LPS 1 LPS 2 LPS 3

DRY & WET LUBRICANTSMulti-use, dry and wet film lubricating technology is ideal for routine firearm conditioning.

Will not attract sand, dirt, or fouling, so it helps ensure long-lasting, reliable firearm function.

MAGNuM PreMIUM LUBrICant WIth PtFe

■ high performance PtFe lubricant

■ thin coating for tight tolerances and sliding tracks

■ Bonds to metal surfaces ■ acts as a protective coating

for metal, plastic and rubber ■ Inverta Spray Valve

net Content Part #11 wt. oz./312 g/358 mL 00616

Also available in 5 gallon size.

FORCE 842°® DrY MOLY LUBrICant

■ extreme-duty lubricant for high temperatures

■ resists high pressure conditions

■ Water and chemical resistant ■ Prevents galling caused by

salt water, powder residue, sweat, and moisture on all types of metal

■ enhances corrosion protection of bluing

■ Bonds to any metal surface ■ Long lasting lubrication for

tight friction points

net Content Part #11 wt. oz./312 g/468 mL 02516

LPS 2® heaVY-DUtY LUBrICant

■ Does not evaporate ■ resists gumming ■ reduces wear caused by

friction and corrosion ■ Goes on wet and stays wet

net Content Part #11 wt. oz./312 g/369 mL 00216

Also available in trigger, 1, 5, and 55 gallon sizes.

LPS 1® GreaSeLeSSLUBrICant& WeaPOn WIPe

■ Displaces moisture ■ Lubricates and protects ■ Will not attract dust ■ Goes on wet and leaves a

dry film ■ Promotes clean bore ■ Inverta Spray Valve

net Contents Part #7” x 10” wipe 0014411 wt. oz./312 g/379 mL 00116

Also available in trigger, 1, 5, and 55 gallon sizes.

DrY Wet

WORkPLACE HAND CLEANER TOWELS

after cleaning your firearm, use the LPS® Workplace hand towels to clean your hands.

• eliminate the need for soap, water, and a sink

• Pleasant citrus scent• Disposable• Fast acting

net Contents:Bucket of 72 towels

Part #:09200

F IRE

SAF E

F IRE

SAF E

AREAS OF CONCERN

LuBRICATE WITH:LPS 1®

LPS 2®

LSt

CLEAN WITH:Precision Clean

QB Duster

FLuSH WITH:CFC Free

PSC

FLuSH WITH:LPS 1®

CFC Free

LuBRICATE WITH:Force 842°®

LPS 1®

LPS 2®

LStMagnum

LPS 1®

Cleans, lubricates, and protectsSafe on most all gun partsPenetrates precision mechanismsDry film will not attract dustDisplaces moistureresists oxidation and varnish formation

LPS 2®

Provides corrosion protection for up to one yearLubricates and protects during storage

LPS 3®

Soft waxy film protects and prevents metal from corrosion during long term storage

LSTPenetrates frozen or rusted partsVery low surface tension to penetrate even the finest tolerance crevices

LuBRICATE WITH:Force 842°®

LPS 1®

LPS 2®

LStMagnum

CLEAN WITH:Precision Clean

QB Duster

LuBRICATE WITH:LPS 1®

LPS 2®

LSt

STORE WITH:LPS 1®

LPS 2®

LPS 3®

STORE WITH:LPS 1®

LPS 2®

LPS 3®

CLEAN WITH:

Precision Clean

QB Duster

FLuSH WITH:

CFC FreeLPS 1®

LuBRICATE WITH:Force 842°®

LPS 1®

LPS 2®

LSt

Force 842°®

extreme-duty lubricant for high temperature, high pressure conditions

Magnumhigh performance PtFe lubricant

Precision CleanWater-base cleaner safe on most surfaces

Inhibits flash rusting on freshly cleaned parts

removes contaminants including fingerprint salts

PSCPlastic safe cleaner ideal for cleaning

electronic accessories

CFC FreeLeaves completely clean,

residue-free surface

LuBRICATE WITH

STORE WITH

CLEAN WITH/FLuSH WITH

©2013 LPS Laboratories LPS®, LPS 1®, LPS 2®, LPS 3®, and Force 842°® are registered trademarks of Illinois Tool WorksAll Rights Reserved • Rev. 10/2013