Low voltage cell - Finelcomp
2
Transcript of Low voltage cell - Finelcomp
ELECTRIC FEATURES
DIMENSIONS
MECHANIC FEATURES
STANDARDS
MATERIALS
FINISH
Nominal voltage
Un
Insulation voltage
Ui
Nominal current
In
Thermal short-circuit strength
Icw
Dynamic short-circuit strength
Ipk
Nominal frequency
f
Arc short-circuit strength
<– 690V 1000V <– 3150A <– 5000A
<– 60kA<– 100kA
<– 132kA <– 220kA 50 – 60Hz 50kA (725V, 0,3s)
Enclosure class
Impact strength (outer/inner)
Type of subdivision
Material strength of doors
IP20 – IP55 IK09/07 2, 3, 4 1,4 mm
Frame Insulating flanges
Protective screens
hot galvanized sheet metal PC hot galvanized
sheet metal
Powder coating RAL7035
The flexible modular structure can be expanded in all three dimensions, and is perfect for enclosing distribution boards and control and automation centres.
E-series gives the designer a free hand. The cell centre system can be made one-sided or two-sided, and the variations include L and U -shapes. One cell centre can have more than one bus bar solution. The bus bars can be installed at any height, either in the middle section or at the back of the centre. The bus bars can be made of either aluminium or copper.
Type-tested withdrawable or removable units have been designed for easy maintenance and replacement. The unit structure is compact, and comes equipped with ventilation and locking and a separate compartment for cables and connections. The withdrawable or removable units
are easy to maintain and replace.
Low voltage cell centre systems
WIDTH 200 300 450 600 750 900 1050HEIGHT 1680 1960DEPTH 385 610BASE 40 140
EN 60529 EN 62262IEC/EN 61439-1IEC/EN 61439-2IEC/EN 61439-3
IEC/EN 62208
WWW.FINELCOMP.FI
Yrittäjänkatu 6, P.O.BOX 68, 83501 Outokumpu, FinlandTel. +358 13 562 411 / Fax. +358 13 555 [email protected]
