Influence of spacecraft outgassing on the exploration of ...
Low Outgassing Silicone Adheisves
-
Upload
master-bond -
Category
Technology
-
view
441 -
download
6
Transcript of Low Outgassing Silicone Adheisves
Hackensack, NJ 07601, USA+1.201.343.8983 ∙ [email protected]
www.masterbond.com
LOW OUTGASSING
SILICONEADHESIVES
ONE PART,NON-CORROSIVE CURING
SYSTEMS
MasterSil 920-LO• Low viscosity• Ideal for conformal coating• Optically clear
MasterSil 921-LO• Flowable system• Ideal for coating sensitive components• Translucent or optically clear in thin sections• Elongation 150-250%
MasterSil 922-LO• Paste viscosity• Ideal for bonding applications• Translucent or optically clear in thin sections• Tensile strength 650-750 psi
SERVICE TEMPERATURE RANGE-175°F to +500°F
TWO PART,ADDITION CURING
SYSTEMS
• Thermal conductivity, 75°F 7-9 BTU•in/ft²•hr•°F• Low shrinkage upon curing
SERVICE TEMPERATURE RANGE-120°F to +400°F
CURE WELL IN THICK SECTIONS
MasterSil 973S-LO• Volume resistivity, 75°F 0.004 ohm-cm• Elongation 50-100%
Pass ASTM E595 testing