long range or guided wave ultrasonic testing
4
Guided Wave or Long Range Ultrasonic Testing Long Range (Guided Waves) Ultrasonic Testing Introduction and Services by Abdallah I. Al Tamimi Industrial Services Est. *2012* Abdallah I. Al Tamimi Industrial Services Establishment Testing and Inspection Works – ISO 9001:2008 Certified AITIS ADVANCE INSPECTION SERVICES IN SAUDI ARABIA & GULF P.O BOX # 30844, Lot 121-123 Al-faiha Industrial City Al-Khobar-31952, Saudi Arabia.TEL:038640369 FAX: 038640396, Site: www.tamimiservices.com, e-mail: [email protected]
-
Upload
adeel-ikhlaq -
Category
Business
-
view
1.074 -
download
7
description
Transcript of long range or guided wave ultrasonic testing
Guided Wave or Long Range Ultrasonic Testing Long Range (Guided Waves) Ultrasonic Testing Introduction and Services by Abdallah I. Al Tamimi Industrial Services Est.
*2012*
Abdallah I. Al Tamimi Industrial Services Establishment Testing and Inspection Works – ISO 9001:2008 Certified
AITIS ADVANCE INSPECTION SERVICES IN SAUDI ARABIA & GULF
P.O BOX # 30844, Lot 121-123 Al-faiha Industrial City Al-Khobar-31952, Saudi Arabia.TEL:038640369 FAX: 038640396, Site: www.tamimiservices.com, e-mail: [email protected]
Long Range Ultrasonic Testing (LRUT)
AITIS ADVANCE INSPECTION SERVICES IN SAUDI ARABIA & GULF
Low frequency ultrasonic waves are used to detect defects and flaws. A set of piezoelectric transducers transmit the ultrasonic waves in both directions along the length of the pipe. The same transducers detect the return signals and analyze by calibrated system software.
The use of LRUT is the detection of corrosion, erosion, metal wall loss and other defects in pipes.
LRUT is suitable for inspection of pipes that are covered with insulation (wool), under roads or are buried; a large length of pipe can be inspected by uncovering a small portion of pipe (About 1 meter) at a single one location and inspect pipe 40 meters both the sides.
Scope:
Guided Wave Systems detect pipe wall
thickness changes which generate Reflective
acoustic waves. These sound waves sweep the
entire thickness of the Pipe, the pipe acting as a
wave guide - where the term guided waves
originated. Guided Wave Systems is sorting or
screening NDT tool will classify pipe in
Categories of wall loss levels. Typically guided
waves provide 100% initial pipe wall screening
coverage. At every change in pipe cross-section
thickness a detectable screen indication is noted.
Typical reflectors are pipe bends circumferential
welds, pipe tees, reducers, pipe supports,
Corrosion of pipe Surface internally or
externally.
P.O BOX # 30844, Lot 121-123 Al-faiha Industrial City Al-Khobar-31952, Saudi Arabia.TEL:038640369
FAX: 038640396, Site: www.tamimiservices.com, e-mail: [email protected]
Applications: No need to remove Paint from pipe. Fast
screening tool.
Mineral wool insulated lines, only one
meter to be removed for the rings.
Road crossings.
Bund wall penetrations.
Buried pipelines.
High temperature lines (<+125°C).
Sleeves sections.
Clearance needed between pipes is 65mm.
Size: Standard diameter sizes from 2 to 48
inches can be inspected.
AITIS ADVANCE INSPECTION SERVICES IN SAUDI ARABIA & GULF
P.O BOX # 30844, Lot 121-123 Al-faiha Industrial City Al-Khobar-31952, Saudi Arabia.TEL:038640369 FAX: 038640396, Site: www.tamimiservices.com, e-mail: [email protected]
Location Map:
Contact us:
Dhib Al Subaii Executive Manager Mobile: +966 505 824 942 Email: [email protected] Sultan Al harthi Operation Manager Mobile: +966 502 572 227, +966 557 587 772 Email: [email protected]
P.O BOX # 30844, Lot 121-123 Al-faiha Industrial City Al-Khobar-31952, Saudi Arabia.TEL:038640369 FAX: 038640396, Site: www.tamimiservices.com, e-mail: [email protected]
AITIS ADVANCE INSPECTION SERVICES IN SAUDI ARABIA & GULF
Dia Awad Training Manager Mobile: +966 549 535 714 Email: [email protected] Gopikrishnan.T Business Development Engineer Mobile: +966 500 566 806 Email: [email protected]
