Logic Analyzer and pulse generator ECE 682. The specification Specification was handed out in ECE...
-
Upload
julius-williams -
Category
Documents
-
view
212 -
download
0
Transcript of Logic Analyzer and pulse generator ECE 682. The specification Specification was handed out in ECE...
Logic Analyzer and pulse generator
ECE 682
The specification
Specification was handed out in ECE 582 last quarter. Basics
3 channels – dedicated output 3 channels – dedicated input 2 channels – configurable as either a dedicated input or output Signals up to 5 MHz was desired – unit from Fall 2006 ~2kHz Interface to host computer using USB – was accomplished
The software
A very important part of this project is the software system that accompanies it
Unit is not really usable without it!!!! Software
Configure the programmable lines Configure the outputs and download the information need to the
unit for generation of the signals Received data over the USB that can be displayed in a window
on the host PC as to the state of the signals being monitored. Prior project – all 8 lines were programmable as input or
output.
Many, Many, Many design decisions What goes in the “box” Format of data for storage and transfer
over the USB link How much local storage is needed? USB 2.0 standard Programming Language
Several systems exist in the “real” world National Instruments has such a unit
Check it out on the web GoLogic System by NCI.