Log Book Form
-
Upload
ebby-onyekwe -
Category
Documents
-
view
217 -
download
0
Transcript of Log Book Form
-
7/29/2019 Log Book Form
1/3
S/n Activities Performed
Week 1
Day 1
Learnt about the various disciplines within the Oil & Gas Industry and how they are
inter-related. Eg Process, Piping, Instrumentation & Control etc
Day 2Learnt about the various Engineering Design Phases within the Oil & Gas Industry
eg Conceptual Studies, Front End Engineering Design (FEED)
Day 3Learnt about the Conceptual Study Phase of Engineering Design and how it relates
to a typical Oil & Gas project.
Day 4Learnt about project deliverables and the typical ones associated with aConceptual Study phase of Design Engineering.
Day 5
Learnt about the typical Cost Estimate Accuracy level at the Conceptual Study
phase of Engineering & the typical duration of this phase of Engineering design.
With appropriate examples.
Week 2
Day 6Learnt about the Pre-FEED & Front End Engineering Design (FEED) phases of a
typical design project.
Day 7 Learnt about the Detailed Engineering Design phase of a typical Oil & Gas project.
Day 8Learnt about EPCI (Engineering, Procurement, Construction & Installation) &
EPCOM (Engineering, Procurement & Commissioning) types of projects.
Day 9Learnt about Construction Management of typical Engineering Design Projects in
the Oil & Gas Industry.
Day 10 Learnt about the Cost of mistakes made in the various phases of Engineering Design
Week 3
Day 11 Learnt about the cost involved in each phase of Engineering Design per time.
Day 12Learnt about the Project deliverables of the different engineering disciplines within
the Engineering Industry eg P&ID, PFD, Process Simulation etc
Day 13Learnt about the relevant Industry codes, standards and Recommended Practices
required for good quality engineering design
Day 14Learnt about the various Design softwares used by different disciplines within the
Oil & Gas Industry
Day 15 Learnt the meaning of Design, Operating & Working pressures.
-
7/29/2019 Log Book Form
2/3
S/n Activities Performed
Week 4
Day 16
Learnt about Nominal Diameter, Schedule Number & thickness calculations of
piping & pipelines.
Day 17 Learnt about the different Pressure classes, ratings of piping and Pipelines.
Day 18Learnt about Crude Oil production terminologies such as shrinkage factor, GOR
(Gas-oil ratio), GLR etc
Day 19Learnt about Crude Oil processing facility (Flow station) and the variousequipments associated with this facility.
Day 20 Learnt about the concept of Crude Oil stabilization and RVP (Reid Vapor Pressure)
Week 5
Day 21 Learnt about the Fundamentals of Pump Design.
Day 22
Learnt about the concepts and principles of
Pump Performance Curve
Pump duty
Pump Efficiency
Pump Head
Pump NPSHA
Pump NPSHR
Day 23 Learnt about pump selection and sizing.
Day 24Learnt about P&ID, its development, the disciplines generating it and relevance in
the Oil & Gas Industry.
Day 25 Learnt about the components of a P&ID
Week 6
Day 26Learnt about the relevant Industry codes & standards required for the development a
P&ID.
Day 27Learnt about the meaning of Long Lead Time Items such as pumps, large pipelines,
compressors etc.
Day 28Learnt about the various Oil & Gas reserves probability such as P50, P90, and P10
as it relates to the petroleum Industry.
Day 29Learnt about the meaning of process simulation and the softwares used to perform
this. Eg HYSYS, Pro II, Pipesim etc
Day 30 Started learning about the simulation tool HYSYS .
-
7/29/2019 Log Book Form
3/3
S/n Activities Performed
Week 7
Day 31
Day 32
Day 33
Day 34
Day 35
Week 8
Day 36
Day 37
Day 38
Day 39
Day 40
Week 9
Day 41
Day 42
Day 43
Day 44
Day 45