Loctite Solution Guide

Ref. No ME 038 - 01/04 JE

The data contained herein are intended as reference only. Please contact your local Henkel Loctite Technical Support Group for assistance and recommendation on specifications for these products.

10

0

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

200

210

220

in cm

230

240

250

260

270

280

290

Fifty years of success and commitment to research and development has made Henkel Loctite one of theworld’s leading global brands, with a depth and diversity of product solutions that is second to none.

Our products exemplify our market-led approach of quickly responding to customers’ needs. When youhave a Bonding, Threadlocking, Sealing or Gasketing requirement then look no further than the Henkel Loc-tite range to find the perfect answer. If you want industrial lubricants and Anti-Seize products, surface pre-paration and rust prevention solutions, fibre or metal-based fillers and repair compounds – or just need acleaning product – then Henkel Loctite has the appropriate solution.

Our continuing programme of introducing new and improved technology – such as our range of innovative“stick” products for some of the Threadlocking, Sealant, and Anti-Seize formulations - is the living proofthat we listen and respond to our customers and the market’s needs. They’re just a part of our portfolio ofsuccess – a success based on leadership, technology and innovation.Equally important is our local distributor network, with the knowledge and capability to quickly and effi-ciently deliver the right products for your application. Henkel Loctite sets high standards for its distributorsand works closely with them to ensure they can supply the products you need – on time, every time.

In over 80 countries worldwide Henkel Loctite technology products - designed and manufactured to thehighest standards - ensure that our customers remain ahead of their needs and on top of their game.

For more information on the complete range of Henkel Loctite products, please visit www.loctite.com where you can download catalogues, data sheets, technical papers and application examples.

Years of Innovation

LOCTITE® THE SOLUTION PROVIDER...

Solution Guide

Henkel Adhesives EgyptP.O. Box 71, 6th of October City 125736th Of October City, 5th Phase lot 90 AEgyptPhone: 002011341396/5/4Fax: 002011341327

Henkel Adhesives Middle EastC/o Ashwa Adhesives Industries Ltd.Industrial Area Phase IIOpp. to Fine Tissue Paper FactoryIndustrial Area, JEDDAH 21442Kingdom of Saudi ArabiaPhone: 00966 2 6373969 Fax : 00966 2 [email protected]

Henkel Adhesives Middle EastOffice No. 405National Bank of Umm Al-Quwain BuildingKhalid Bin Waleed St (Banks Road)DUBAI / PO Box 29073United Arab EmiratesPhone: 009714 3970499Fax: 009714 3972194

32

www.loctite.com

With this solution guide you can easily select the best

Henkel Loctite product to solve engineering problems

throughout industry, in original equipment manufacture

as well as maintenance and repair.

It has been developed to make your product selection quick,

easy and right first time. You may navigate this guide to find

solutions from several different starting points:

■ The problem solving section

■ Henkel Loctite product categories

■ A product list including ordering information

For more information about our products or us just "hit”

the Henkel Loctite website – www.loctite.com.

This will give you – anytime day or night – further information

on all of our products including those described here.

Also you have access to our most up-to-date literature and

news about solutions to industrial problems using Henkel

Loctite, addressing segments such as Industrial OEM,

Automotive, Electronics, Maintenance and Repair.

Making the Right Choice

For additional information

visit our Web Site, at:

Problem Solving Guide

ThreadlockingLocking of Threaded Fasteners

Pipe and Thread SealingSealing of Threaded Components

GasketingSealing of Flanges

RetainingSecuring Cylindrical Assemblies

Instant Bonding

Structural Bonding

UV Bonding

Flexible Sealing and Bonding

Lubrication

Surface Treatment and Rust Prevention

Fibre-reinforced Plastic Repair

Metal-filled Compounds

Wearing Compounds

Cleaning

Surface Preparation Activators and Primers

Emergency Repair Products

Equipment

Product OrderingInformation

Measurement Table

4 5

? Join different materials rapidly

? Bond parts temporarily during positioning or repair

? Re-use broken parts

? Need to speed up production

Joining Small Parts

Page 18

? Leaks from hydraulic, air, coolant, oil or other threaded fittings

? Blockages caused by debrisfrom traditional tape andhemp/paste sealants

? Need to lock and seal valves,gauges, taps and fittings inany position without leaks

See also Emergency RepairProducts on page 44

Fluid Pipe Systems

? Nuts, bolts, studs and otherthreaded parts loosening

? Need to prevent threadscorroding and seizing

Nuts, Bolts, Studs, Threaded Parts

? Loose bearings, bushes, shafts or cylindrical parts that have become oval

? Prevent reoccurrence of fretting corrosion and wear, in coaxial assemblies

? Need to increase strength

? Simplify assembly process

Bearings, Bushes,Shafts, CylindricalParts

? Bolted flanges leaking

? Fretting corrosion and /or bolt fatigue

? Bolts loosen as gaskets relax

? Need to stop movement between the flanges

Flanges Leaking

Page 10 Page 12 Page 14 Page 16

? Need to secure small parts in plastic, glass, metal

? Need cure on command

? Need fast curing on a semi or fully automated productionline

? Need to pot/seal

Joining Plastic and Glass to each otherand themselves andto Metals

Page 20

What’s the Problem?

Threadlocking Pipe and Thread Sealing

Gasketing Retaining Instant Bonding UV Bonding

76

Page 36

? Re-build, restore, repair metalparts and assemblies

? Make castings, moulds andfixtures

See also Emergency RepairProducts on page 44

Worn and Damaged Parts

? Prevent corrosion afterassembly or during storage

? Guard against electro-chemical effects

? Protect welds at high temperatures

Corroding Components

? Repair, restore, and join FRPparts or assemblies

? Waterproof filling and sealingof FRP, wood, metal

? Durable structural repairs

Repair/Join Fibre-reinforced Plastic Parts

Page 32 Page 34

? Strong durable joints between different materials

? Replace welding/ riveting -with a corrosion-free, reduced stress joint

Joining Large/ Structural Parts

? Need to combat wear and seizing caused by friction

? Resist high temperatures and tough operating conditions

Lubrication

? Impact and vibration-resistantjoint

? Permanently flexible bondingof different materials

? Joints have large gaps or aresubject to high temperatures

Flexible Joining of Parts

Page 22 Page 24 Page 26


Metal Filled Compounds

Surface Treatmentand Rust Prevention


Flexible Sealing and Bonding

Structural Bonding Lubrication

8 9

Page 38

Wear

? Repair or prevent erosion, sliding abrasion, wear andcorrosion in equipment such as pump housings, chutes cyclones etc.

? Protect against cavitation

Page 40

? Cleaning parts prior to usingadhesives/sealants

? Have to remove cured resins, adhesives/sealants, oldgaskets, and other compoundswithout surface damage

? Cleaning electrical contacts

? Cleaning hands, removing ink,paint, resin and hard-to-shiftdirt – with or without water

Cleaning Parts and Hands

? Fill over-sized holes, smooth rough welds, repair nonstructural defects

? Make a new O ring – in situ.

? Emergency plugging and sealing of burst or leakingpipes

EmergencyRepair

Dispensing and CuringAdhesives and Sealants

Page 42 Page 44 Page 46


? Slow adhesive/ sealant cure on oily, contaminated, inert or passivated parts

? Working in a cold environment

? Poor adhesion to the substrate

Slow Adhesive/ Poor Adhesion

? Apply thick or thin productseasily, cleanly, accurately and without waste

? Cure UV Bonding productsquickly and completely

? Need NSF approval check section:

• Threadlocking• Pipe and Thread Sealing• Gasketing• Retaining and Securing

Cylindrical Assemblies• Instant Bonding• Structural Bonding• Lubrication – Oils

& Dry film• Lubrication – Greases• Lubrication – Anti-seize

Products with NSF Approval

NSF is one of the mostwidely respected and recognised global third-party certification providersfocusing on food, water,indoor air and the environment. For more information go to www.nsf.com

Wearing Compounds

Surface PreparationActivators and Primers

EquipmentEmergency Repair Products

Cleaning

Size of Thread Up to M 6 Up to M 36 Up to M 36 Up to M 50 Up to M 20 Up to M 50

Strength Medium/High Low Medium Medium High High

Functional Strength 1 3 hrs 6 hrs 2 hrs 6 hrs 6 hrs 24 hrs

Breakaway Torque M10 bolts 10 Nm 6 Nm 20 Nm 19 Nm 38 Nm 25 Nm

Long-Term Temperature Resistance +150 °C +150 °C +150 °C +150 °C +150 °C +150 °C

Pack Sizes 10 ml, 50 ml, 250 ml 10 ml, 50 ml, 250 ml 10 ml, 50 ml, 250 ml 9 g, 19 g stick 10 ml, 50 ml, 250 ml 9 g, 19 g stick

Loctite® 222 Recommended for low-strength threadlocking ofadjusting screws, counter-sunk head screws and setscrews.

Also use on low strengthmetals such as aluminium orbrass which could breakduring disassembly.

P1 NSF Reg. No.: 123002

Loctite® 243 Effective on all types ofmetal threaded fasteners.

Prevents loosening on vibrat-ing parts such as pumps,motor mounting bolts, gearboxes or presses.

Recommended for usewhere disassembly with hand toolsis required for servicing andwhere parts are contamina-ted with oil.

P1 NSF Reg. No.: 123000Certified to ANSI/NSF Standard 61

Application Examples

1 Typical value @ 22 °C

10 11

222 243

Liquid

Low High

■ Resists vibration■ Single part – clean and easy to apply■ Can be used on all sizes of fasteners – reduces inventory costs■ Seals threads – allows through-hole tapping

Handy Hints:

■ Clean parts with Loctite® 7063 before applying the adhesive ■ If the threadlocker will be applied below 5 °C, pre-treat with

Loctite® 7240 (Activator)■ If the parts were in contact with aqueous washing solutions or

cutting fluids which leave a protective layer on the surface, washwith hot water before use

■ If one substrate is plastic look at page 18/19 Instant Bonding

Loctite® 248Convenient to use, nomigration. Suitable whereproduct application accessis difficult – overhead, under,or around machinery – oncomponents that cannot bemoved.

Effective on all types ofmetal threaded fasteners.Recommended for applicati-ons where disassembly isrequired – Machine tools andpresses, pumps and com-pressors, mounting bolts,gear boxes.

Loctite® 2701 (improved Loctite® 270)For use on all metal fasteners (including stain-less steels and those withprotective coatings such aszinc) where regular removalfor maintenance is notrequired.

Recommended forpermanently locking studson engine blocks and pump housings.

P1 NSF Reg. No.: 123006 – only Loctite® 270

Loctite® 268Convenient to use, nomigration.Suitable where productapplication access is diffi-cult – overhead, under, oraround machinery –on components that cannotbe moved.

Effective on all types ofmetal threaded fasteners.Recommended for usewhere regular removal for maintenance is notrequired –suspension bolts, motor transmission and pumpmounts, bearing cap boltsand studs.

Loctite® 290Recommended for locking preassembled fasteners, e.g. instrumentation screws, electrical connectors and set screws.

290

Wicking grade

Yes No

Threadlocking – Locking of Threaded Fasteners

Solution

What strength do you require?

Liquid Semi-Solid

268

Semi-Solid

Medium

Are the parts already assembled?

248 2701(improved 270)

TH

EN

EW

AN

AE

RO

BIC

ADHESIVE NOZZLE & CAP

Curing semi-solid

3”

+150 °C

Low

Metal

Yes

19 g stick

12 13

Are the parts metal or plastic?

55

Handy Hints:■ If the sealant (Loctite® 542, 577 or 572) will be applied below

5 °C, pre-treat with Loctite® 7240 (Activator)■ All parts must be clean & dry before sealing –

use Loctite® 7063■ If the parts have been in contact with washes or cutting fluids

containing nitrites wash them with hot water 1

■ Clean U-PVC pipe surfaces with Loctite® 7044 prior to joining with Loctite® 5004

Do you need to make post assembly adjustments?

Yes

CordJoining non threadedplastic pipe fittings

5004

Plastic or combined plastic/metal parts

Loctite® 577Recommended for all coar-se metal threads. Suitablefor fast applications at lowtemperatures e.g. outdoorplant maintenance.

Carries the GermanDVGW approval (NG-5146AR 0621). Tested in accordance toEN 751-1.

Meets BS 6956 type B forsealing gas fittings.

WRC approval for usewith potable water.

P1 NSF Reg. No.: 123001WRC Approval 0302507

Loctite® 572Recommended for all coar-se metal threads whereslow cure is required forajusting the aligment of val-ves and fittings.

Meets BS 6956 type B forsealing gas fittings.

Loctite® 542Recommended for finethreaded fittings as usedin hydraulic and pneuma-tic installations and smallfittings in general.

Carries the GermanDVGW approval (NG-5146AR 0855). Tested in accordance toEN 751-1.

Meets BS 6956 type A forsealing gas fittings.

WRC approval for usewith potable water.

Pipe and Thread Sealing –Sealing of Threaded Components

Loctite® 5331Recommended for use onthreaded plastic or pla-stic/ metal fittings carryinghot or cold water e.g.industrial and agriculturalplastic water pipesy-stems, or drainagesystems.

Carries the GermanDVGW (NG-5146 AR0618) and KTW approvalsfor gas and potable water.Tested in accordance toEN 751-1.

WRC approved for usewith potable water up to85 °C.

P1 NSF Reg. No.: 123620

1 Does not apply to Loctite® 5331/55

Loctite® 55Can be safely applied onmetal and plastics threadedfittings.

Potable water: WRC listedfor use with potable water upto 85 °C, meets BS 6920.KTW recommendation forcold and hot water.

Gas and water: Carries the German DVGW approval (No. DV-5142AU0166),together with DIN 30660.Tested in accordance withEN 751-2 Class ARp.

Certified to ANSI/NSF Standard 61.


Solution

Loctite® 5004Special solvent-based adhe-sive for bonding U-PVCpipes.

Complies with the following:DIN 16970 and KRV guide-lines R1.17; BS 4346, part 3and ASTM D2564.

The cured adhesive meetsthe requirements of admissi-on for drinking water supplythrough U-PVC pipes incompliance with the Recom-mendation no. VIII of the Plastics Commission ofthe Bundesgesundheitsamt(Germany Health Authorities).

■ Provide an instant, low pressure seal for all types of pipe connections■ Will not creep, shrink or block systems (including filters) by shredding■ Disassembly can be achieved easily with normal tools■ Replace all tapes and hemp/pastes combinations

Loctite® 561Convenient to use, no migration. Suitable whereproduct application accessis difficult – overhead,under, or around machinery– on components that can-not be moved.

Recommended for all coar-se metal threads, wheredisassembly is required.

Ideal for use in a broadrange of industries inclu-ding chemical processing,waste water treatment, and automotive.

561572(Slow cure)

577General purpose

Metal parts

Are the threads fine or coarse?

Coarse up to (R3) pipe threadLiquid

No

572Slow cure

Fine up to (R3/4) pipe thread

542Hydraulic and

pneumatic5331

Semi-Solid

561

Description Solvent Cord Curing gel Curing liquid Curing gel Curing gel

Maximum Thread Size N.A. Tested to 4” 3” 3/4” 3” 3”

Temperature Resistance As plastic +130 °C +150 °C +150 °C +150 °C +150 °C

Disassembly Strength High Low Low Medium Medium Medium

Substrate to be Sealed U-PVC Metal, plastic or both Metal, plastic or both Metal Metal Metal

Instant Low Pressure Seal No Yes (full pressure) Yes No Yes No

Pack Sizes: 125 g, 250 g, 500 g 80 g = 150 m cord 100 ml 10 ml, 50 ml, 250 ml 50 ml, 250 ml 50 ml, 250 ml

1514

Does the existing gasket need to be used as a shim?

574

Handy Hints:■ If there are traces of old gasket left on the

parts to be sealed, clean with Loctite® 7200 gasket remover

■ All parts must be clean and dry before sealing– use Loctite® 7063

■ Anaerobic products cure between metal surfaces in the absence of air

■ Use activator Loctite® 7240 in cold conditions to speed up the cure

Yes

5203 3020

Coat existing gasket

Positioning cut gaskets

518 510

Up to 0.5 mm

5910 5699

Gasket Type Formed-in-place Use with cut-gasket Formed-in-place Formed-in-place Formed-in-place Formed-in-place Formed-in-place Formed-in-place

Flange Type Rigid Rigid or Flexible Rigid Rigid Rigid Rigid Flexible Flexible

Cure Method Anaerobic Solvent evaporation Anaerobic Anaerobic Anaerobic Anaerobic Moisture Moisture

Tack-Free Time N.A. N.A. N.A. N.A. N.A. N.A. 20 min. 10 min.

Temperature Resistance 150 °C N.A. 150 °C 150 °C 150 °C up to 200 °C 200 °C 200 °C

Instant Seal Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent

Oil Resistance Excellent N.A. Excellent Excellent Excellent Excellent Excellent Good

Water/Glycol Resistance Moderate N.A. Excellent Moderate Excellent Good Moderate Excellent

Pack Sizes 50 ml, 300 ml cartridge 400 ml aerosol 50 ml, 250 ml tube 65 ml, 300 ml cartridge 50ml,160ml,250ml cartridge 50 ml, 300 ml cartridge 300 ml cartridge 300 ml cartridge

5205

Greater than 0.5 mm

Plastic or combined plastic/metal parts

What gap must the sealant fill?

No

Gasketing – Sealing of Flanges

Loctite® 5203 Recommended for coating and re-usinggaskets to improve sealing. Low strength metal/metal sealing.

Loctite® 574Recommended for useon rigid metal partse.g. cast iron compo-nents and pump hou-sings, etc.

Loctite® 5205 Recommended foraluminium parts whereflexibility is required e.g. aluminium gearboxand engine castings,etc.

■ No shimming effect – controlled tolerances, no need for re-torquing■ Fill all voids – reduce the need for a fine surface finish of flanges■ Parts can be disassembled easily even after extended service■ Resists high pressure when fully cured

Loctite® 5910Replacement for cork and paper cut gaskets on flanges and stamped sheet metalcovers.

Recommended for usewhere high vibration orflexing occurs. Canalso be used with plastic and paintedparts.

Loctite® 3020Adhesive/sealant forholding pre-cut gasketsin place during assemb-ly. Can be applied to allrubber, cork, paper andmetal gaskets.

Loctite® 518 Recommended for use on rigid iron, steel andaluminium flanges.

P1 NSF Reg. No.: 123758

Loctite® 5699 Recommended forsealing all types offlanges including stamped sheet metalwhere water glycolresistance is required.P1 NSF Reg. No.: 122998


Loctite® 510Sealing rigid flangesRecommended for applications wherehigh temperature andchemical resistance isneeded.

P1 NSF Reg. No.: 123007

Solution

Metals Aluminium

1716

Strength Required High Moderate High High High

Handling Strength1 20 min. 30 min. 5 min. 8 min. 10 min.

Diametrical Clearance Up to 0.5 mm Up to 0.1 mm Up to 0.15 mm Up to 0.25 mm Up to 0.1 mm

Temperature Resistance 150 °C 150 °C 175 °C 150 °C 150 °C

Pack Sizes 50 ml 10 ml, 50 ml, 250 ml 50 ml, 250 ml 50 ml, 250 ml 10 ml, 50 ml, 250 ml

Yes (gaps to 0.5 mm)

660with Activator 7240

648 638 603(improved 601)

Handy Hints:■ If the retainer will be applied below 5 °C, pre-treat with

Loctite® 7240 (Activator)■ All parts must be clean & dry before sealing –

use Loctite® 7063■ If the parts have been in contact with washing or cutting fluids

containing nitrites, wash with hot water■ Can also be used to increase the strength of existing designs

641

Yes

No (gaps to 0.25 mm)

Will the parts be dismantled later for maintenance? i.e. bearings

Up to 0.1mmUp to 0.25 mm

No

Yes (to 175 °C)

Is the assembly very loose or badly worn?

Temperatures above 150 °C?

No

How big is the gap?

Retaining –Securing Cylindrical Assemblies■ High and moderate strength products – can carry high loads

and eliminate fretting■ Fill all voids – prevent corrosion■ Reduce the need for close tolerances■ 100 % contact – load and stress is distributed evenly over the joint

Loctite® 660 (use with Activator Loctite® 7240) Used for repairing worn coaxialparts without remachining; enables re-use of worn bearingseats, keys, splines, tapers, or for retaining shims. P1 NSF Reg. No.: 123704

Loctite® 648Recommended for high temperature retaining of partswith a clearance or interference fit i.e. retaining bushes, bearings, seals,fans, and liners.

Loctite® 641Recommended for parts that will need subsequentdismantling i.e. retention ofbearings onto shafts and into housings.

1 at room temperature on steel joints

Loctite® 603(improved Loctite® 601)For retaining close fittingcylindrical parts (up to 0.1 mmgap). For use on cylindricalfitting parts where thoroughdegreasing is not possible.

Tested and approved for useon bearings.

P1 NSF Reg. No.: 123003

Loctite® 638Gives best resistance todynamic, axial and radialloads.

Recommended for retaining shafts, gears, pulleys and similar cylindrical parts.

P1 NSF Reg. No.: 123010WRC Approval 9909511


Solution

TH

EN

EW

AN

AE

RO

BIC

ADHESIVE NOZZLE & CAP

18 19

Operating Temperature Up to 80 °C Up to 80 °C Up to 100 °C 70 °C Up to 80 °C Up to 80 °C Up to 80 °C

Fixture Time1 10-20 sec. 5-20 sec. 60-120 sec. 5-20 sec. 3-20 sec. 5-20 sec. 5-20 sec.

Viscosity mPa.s 20 Gel 300 400 2 110 1000

Especially for Plastics Porous Substrates Metal/Plastics Flexible Substrates Metal/Plastics Porous Substrates Porous Substrates

Pack Sizes 20 g, 500 g 10 g, 20 g, 300 g, 300 g cartridge 20 g, 500 g 20 g, 500 g 20 g, 500 g 3 g, 20 g, 50 g, 500 g 20 g, 500 g

Yes

406with Primer 7239

431

No

Do any of the following apply?

Is the gap over 0.1 mm? Do you require a non-drip/non-run product?

454

If one or more apply

480

Yes

401

No

Are you bonding “difficult to bond” rubber or plastic? e.g. polyethylene, polypropylene, PTFE, thermoplastic rubbers such as Santoprene®

Handy Hints:■ To improve adhesion to

difficult-to-bond materi-als e.g. PE, PP, PTFE, Santoprene® or thermoplastic rubbers; in combination with Loctite® 401, 406, 431, 454, 480 or 4850 – use Primer Loctite®

7239

Bonding flexiblematerials

4850

Is the bond going to be subject to shock or peel loads?

4062

No

Instant Bonding

Loctite® 454General purpose gel for bondingmetals, composite materials,wood, cork, foam, leather, card,paper, and unglazed ceramics. Recommended for use on verti-cal or overhead surfaces.P1 NSF Reg. No.: 123009

Loctite® 406Rapid bonding of rubbers (in-cluding EPDM), plastics andelastomers, when used with Loc-tite® 7239 Polyolefin Primerbonds “difficult to bond” plastics.

1 on steel

Loctite® 4062Ideal for very fast bonding of plastic, rubber and metal substrates.

Loctite® 480Black, rubber toughened gradefor bonding metal to metal andmetal to rubber; especially suit-able with applications where highpeel strength is required and/orshock loads are present.

Loctite® 431Particularly suitable for bon-ding porous or absorbentmaterials such as: wood,paper, leather, cork andfabric.

Loctite® 401General purpose for bondingmost substrates such as plastics, rubber, metals, card, wood.

P1 NSF Reg. No.: 123011

■ Fixtures in seconds■ Clear bond line – good cosmetic appearance■ Versatile – dissimilar materials can be bonded■ High strength – often giving a bond stronger than the materials being bonded■ Small parts bonding


Solution

Loctite® 4850Flexible instant AdhesiveMedium viscosity, fastcuring,transparent adhesive.Especially designed for the assembly and repair of flexiblematerials and components.Typical application areas: Bonding materials used in themanufacture and repair of fle-xible gaskets and seals, gaiters,and loudspeaker assemblies.

2120

Operating Temperature +100 °C +100 °C +120 °C Up to 120 °C

Fixturing time 1 1-10 sec. 1-10 sec. 5-20 sec. 5-20 sec.

Viscosity mPa.s 100 5.800 5.500 19.500

Pack sizes 250 ml 250 ml 250 ml 250 ml

350

What is your transparent substrate?

352

Handy Hints:■ One of the parts being bonded must be UV-transparent■ Henkel Loctite provides a full range of UV curing equipment

302

Yes Horizontal Vertical

Horizontal or vertical application

Glass

322

No

Wicking grade

Plastic

ww

w.z

anot

ti.it

Loctite® 352Thixotropic clear UV curing adhesive.

Especially designed for vertical application.

Recommended for glass in combination with glass,metal, ceramic and GlassReinforced Plastic (GRP).

UV Bonding

■ Fast and Cure on Demand■ Rapid fixture after alignment or repositioning of parts■ Clear bond line■ High strength and excellent humidity resistance

Loctite® 350Medium viscosity UV curing adhesive.

Highly transparent.

Recommended for glass in combination with glass andmetal.

Loctite® 302Low viscosity fast curingclear UV curing adhesive.

Especially designed for post-application.

Recommended for plasticsto themselves, metal andglass.

1 Fixturing time is dependent on type of lamp and intensity as well as application details

Loctite® 322Medium viscosity fast curingclear UV curing adhesive.

Recommended for plasticsto themselves, metal andglass.


Solution

Loctite® Hysol® 9492 A&Bis a high operating tempera-ture resistant, 2K-Epoxy adhe-sive, suitable for multi purpo-se applications. Ideal for bonding electronic com-ponents and mesh to frames.

2322

Structural Bonding

■ Bonds a wide variety of materials such as wood, metals, hard plastics and glass

■ Provide a tough and resilient joint ■ Have high shear and peel strength

Loctite® Hysol® 3450 A&Bis a five-minute, 2K-Epoxyadhesive, suitable for wherelarge gaps are present. Idealfor bonding and filling damaged components.

Loctite® Hysol® 3421 A&B is a general purpose, 2K-Epoxy adhesive, for bondinglarge surfaces which requirea long open time. Ideal forbonding metals, plastics andmost other surfaces whichwill be subjected to highhumidity environments.

Description 2K-Epoxy 2-part-acrylic (no mix) 2K-Epoxy 2K-Epoxy 2K-Epoxy 2K-Epoxy

Mix ratio by volume 1:1 – 1:1 1:1 2:1 2:1

Mix ratio by weight 100:90 – 100:100 100:105 100:50 100:50

Working life 180 min. – 4 min. 4 min. 60 min. 15 min.

Fixture Time 240 min. 5 min. 12 min. 12 min. 180 min. 75 min.

Colour Clear amber Light amber Ultra clear Grey Off-white White

Viscosity 40 Pa.s 67.5 Pa.s 25 Pa.s 35 Pa.s 30 Pa.s 30 Pa.s

Operating temperature up to 100 °C up to 100 °C up to 80 °C up to 100 °C up to 120 °C up to 180 °C

Pack sizes 50 ml, 200 ml, 400 ml 18 ml, 50 ml Kit, 24 ml Twin Syringe; 25 ml Twin Syringe 50 ml, 200 ml, 400 ml 50 ml, 400 ml

Dual Cartridges; 315 ml Cartridge 50 ml, 200 ml Dual Dual Cartridges; 1 kg Cans; Dual Cartridges

1 kg Cans, 20 kg Pails Cartridges; 1 kg Cans 20 kg (A), 17 kg (B) Pails

3450 A&B

Loctite® Hysol® 9466 A&Bis a toughened, 2K-Epoxyadhesive, suitable for multi-purpose applications requi-ring long open time and highbonding strength. Ideal for awide variety of substrates likemetals, ceramic and mostplastics.

9466 A&B

Loctite® Hysol® 3430 A&Bis a five-minute, 2K-Epoxyadhesive, suitable for appli-cations requiring an opticallyclear bond line. Ideal for bonding glass, decorativepanels and displays andgeneral repair applications.

3430 A&B

What main performance are you looking for?

9492 A&B

Loctite® 330/7388 MULTI-BOND® 50 ml Kit is a two part no mix, fastcuring, toughened adhesivewith good impact resistance.Ideal for bonding dissimilarsubstrates, including plasticslike PC, PVC, phenolic andacrylic.

P1 NSF Reg. No.: 123005

General purpose High TempertureHandy Hints:■ All parts must be clean & dry before bonding –

use Loctite® 7063■ For slow curing products, clamp during cure


Solution 330/7388MULTI-BOND®

Five-minute Thoughened

3421 A&B

2524

Operating Temperature Up to 200 °C Up to 250 °C 350 °C Up to 350 °C Up to 80 °C Up to 100 °C

Paintable No No No No Yes Yes

Cure Method Moisture Moisture Moisture Moisture Moisture Moisture

Skin Over Time 70 min. 5 min. 8 - 10 min. 5 min. 70 min. 15 min.

Viscosity Paste Paste Liquid Paste Paste Paste

Especially for Electrical components Glass Sealing/ Oven door seals Flexible, Flexible bonds, joint sealingPotting heat source sealing medium strength bonds

Colour Variations Translucent 5366 - Clear Red Red 5226 - Black Low Strength: 5062-Black, 5063- Grey, 5064-White5367 - White 5221 - Grey Medium: 5065- Black, 5066- Dark-Grey, 5068-White5368 - Black 5225 - White High Strength: 5069-Black

Pack Sizes 40 ml kit, 300 ml 310 ml 310 ml 310 ml 300 ml 310 ml

Yes

5145 5226 5069

Are you sealing electrical items?

No

Do you require high temperature resistance?

Yes

If a higher strength sealer and/or paintability is required

No

53995366

Up to 250 °C Up to 350 °C Up to 350 °C

Handy Hints:To improve adhesion of Loctite® 5221/5225/5226 use the following primers:

Loctite® 7251 – GlassLoctite® 7252 – Plastic and paintLoctite® 7253 – Metal

5398

Flexible Sealing and Bonding■ Withstand impact shock and bending■ Resist thermal expansion and contraction as well as vibration■ Have very good gap fill■ Wide temperature range■ Good weathering resistance

Loctite® 5145 Flexible non-corrosive electrical grade Adhesive/SealantLow odour, neutral cure thatdoes not corrode electricaland electronic components.

Loctite® 5399 Flexible high temperatureAdhesive/SealantSuitable for bonding andsealing glass, metal, andceramics, where temperaturecan reach 350 °C, e.g. sealingof stove flues/chimneys,industrial ovens, electro-appliances and ventilationsystems.

Loctite® 5366/5367/5368 Flexible AdhesiveCures to a flexible rubber.

Recommended for bonding, sealing and protecting components subjected tovibration. Suitable for glass, metal,ceramics, composites, andmost plastics.

Loctite® 5221/5225/5226Flexible Adhesive/SealantPaintable, with good chemi-cal resistance.

Recommended for bondingmaterials with different coeffi-cients of thermal expansion.

See handy hints.

Loctite® 5062/5063/50645065/5066/5068/5069MS PolymerAdhesive/SealantPermanently join and seal bare and painted metals, plastics, wood and many othermaterials, without the need forprimers.

Good UV resistance.


Loctite® 5398Flexible Adhesive/SealantFood gradeRecommended for sealing heatexchangers steam circuits,water heaters, ovens and inequipment such as turbines,pumps.The product may also be usedfor protection and insulation ofelectrical boxes.

Solution

Appearance Black Off white paste Colourless Yellow Colourless Colourless liquid Colourless liquid Light yellow liquid

Base MoS2 PTFE Mineral oil Synthetic oil Mineral oil Silicone oil Mineral oil Mineral oil

Viscosity – – 11 mm2/s 11 mm2/s < 100 mPa.s 350 mPa.s 46 mm2/s 17.5 mm2/s

Temperature Range -180 to +450 °C -180 to +260 °C -20 to +120 °C -30 to +250 °C N.A. -30 to +150 °C N.A. -20 to +120 °C

Load Test 4 Ball N – – 1800 1260 N.A. N.A. 5000 –

Pack Sizes 400 ml aerosol 400 ml aerosol 400 ml 400 ml aerosol 400 ml aerosol 400 ml aerosol 400 ml aerosol 400 ml aerosol

Lubrication – Oils and Dry Film

Loctite® 8021Silicone oil

Ideal for lubricatingplastics and elasto-mers.

Loctite® 8031Cutting oil

Protects cutting tools inoperation.

To be used when drilling,sawing or tapping steeland most non-ferrous metals.

It is especially designedfor use with stainlesssteel.

Loctite® 8201Five way spray

Frees, lubricates, cleans.

Displaces moisture,and prevents corrosion.

Ideal for light lubrica-tion of metals and freeing assemblies.

■ Prevent seizing and galling during assembly and operation■ Inhibit corrosion and oxidation in chemically and thermally

aggressive environments■ Penetrate and free corroded assemblies■ Prevent wear and cold welding during assembly and operation

27

Siliconeoil

General purpose

82018021 8031

OilDry film lubricant

Low viscosity penetrating oil

Free rusted, and seized parts

80188011

Lubricate chains

Cutting oil

Loctite® 8001Food approved mineral oil spray

Multi-purpose penetrating oil.

Product is suitable forthe food, pharma-ceutical and textileindustries.

It is ideal for lubricatingvalve seats, collars,chains, hinges, cuttingknives in food trans-port equipment andsewing machines.

H1 NSF Reg. No.:122999

Loctite® 8011High temperature chain oil spray

Oxidation resistancepro-longs lubricant service life.

This product is usedfor the lubrication of openmechanisms, con-veyors and chains atelevated temperaturesup to 250 ºC.


Loctite® 8018Solvo Rust

Releases rusted, corroded and seizedcomponents.

A penetrating oil to freerusted nuts, bolts, screws, fittings, otherfasteners as well asmetal components inindustrial equipment.

Also recommended forcleaning parts beforelubrication and as lightlubricant and rust inhibitor.

8001(Food grade)

Food grade

Loctite® 8192PTFE coating

Food approved coating.

Meets CNERNA Guide1992. Ideal for use on con-veyor belts, slidewaysand cams.


8192

General purpose

Loctite® 8191MoS2 Anti-friction coating – aerosol

Rapidly air-dries to pro-tect surfaces from fret-ting and corrosion.Enhances the per-formance of oils andgreases.

8191


Solution

26

2928

Lubrication – Greases


aggressive environments■ Withstand high temperatures and extreme pressures

Loctite® 8104Food grade silicone greaseRecommended for lubri-cation of most elastomericand plastic parts.

Food approved.

Meets CNERNA Guide 1992.

H1 NSF Reg. No.: 122981

Loctite® 8102High performance greaseCan be used in humid conditions and withstandsheavy loads at medium andhigh speeds.

Use for lubrication of bearings, open gears andslide ways.

Loctite® 8101chain lubricantWater resistant.

Chain lubricant with anti-fling properties.

Use on open mechanismssuch as chains and gears.

Loctite® 8103MoS2 greaseWithstands heavy loads and vibration at all speeds.

Typically used on cylindricaltaper, roller and plain bearings.


Solution

Loctite® 8105Food grademineral greaseLubricant for moving parts.

Recommended for use on equipment in food proces-sing and pharmaceuticalindustries.

It is ideally suited for

bearings, cams, valves andconveyors for food and pharmaceutical products.

H1 NSF Reg. No.: 122979

8104 8105 8103 8101

Chains,gears

Grease

High performanceFood grade products

8102

Appearance Colourless smooth paste White Beige high tack paste Black smooth paste Amber high tack paste

Base Oil and Additives Silicone Mineral Mineral E.P. Mineral E.P. MoS2 Synthetic E.P.

Viscosity Paste Paste Paste Paste Paste

Thickener Silica Gel Inorganic Gel Lithium soap complex Lithium soap Lithium soap

Drop Point – None 290 °C >190 °C >190 °C

N.L.G.I. Class 2/3 2 2 2 2

Speed Characteristics DN Factor 50.000 150.000 500.000 500.000 N.A.

Temperature Range -50 to +200 °C -20 to +150 °C -30 to +200 °C -20 to +150 °C -25 to +170 °C

Load Test 4 Ball N N.A. 1600 Weld load 3150 Weld load 3500 Weld load 3150 Weld load

Pack Sizes 1 litre can 400 ml cartridge 400g cartridge 400g cartridge 400 ml aerosol1 litre can 1 litre can

Lubrication – Anti-Seize


aggressive environments■ Prevent wear and cold welding during assembly and operation

3130

8007/80088065

C5-A® Copper Anti-Seize

Aluminium Anti-Seize

Food GradeAnti-Seize

80148150/81518060 8154/8155

C5-A®

Loctite® 8007 aerosolLoctite® 8008 brush topLoctite® 8065 stickCopper based Anti-Seize,for screws, nuts, pipes,heat exchangers etc.Typical applications:exhaust bolts, brake caliper bolts.

Loctite® 8150 canLoctite® 8151 aerosolLoctite® 8060 stickAluminium based Anti-Seize for screws, nuts,pipes, heat exchangersetc. Typical applications:wheel to hub connection.

Loctite® 8153 aerosolLoctite® 8156 canMetal free Anti-Seize.Recommended where cleanliness is impor-tant. Can be used onstainless steel, copperalloys, in wet environ-ments and all otherstandard applications.

Loctite® 8154 aerosolLoctite® 8155 canMoS2 assembly pastewhich is ideal for slowmoving or staticassemblies. Preventspress fits from gallingor seizing and canreduce the risk of wearduring start up.

Loctite® 8014 canFood grade metal free Anti-Seize. Recommen-ded for stainless steel components, and canbe used in wet environ-ments.

Do you need?

Yes

MoS2 Assembly Paste/Spray

Metal Free Anti-Seize

Need metal free formulation? Is the application for incidental food contact?

No Yes No Yes

8153/81568023 8013 8009 8012

Marine Grade Anti-Seize

N-7000 HighPurity Anti-Seize

Heavy Duty Anti-Seize

Moly Paste

High performance applications

To use in high humi-dity / water concen-

trations

High Purity Ideal for Nuclear

Applications

To use for long term protection at high temperatures

To eliminate friction seizure during

assembly (high %MoS2)

Colour Black Dark grey Black Black Copper Grey White Black White

Solid lubricating agent Graphite, calcium, Graphite & Graphite & calcium MoS2 Copper & graphite Extreme MoS2 White oil and boron nitride & calcium oxide fluoride & rust inhibitors pressure (EP) extreme pressurerust inhibitors additives (EP) additives

Torque Coefficient (K) 0.18 0.16 0.16 0.11 – – – – –

N.L.G.I. class 1 1 1 1 1 0 2 0 1

Temperature Range -30 to +1315 °C -30 to +1315 °C -30 to +1315 °C -30 to +400 °C -30 to +980 °C -30 to +900 °C -25 to +900 °C -20 to +450 °C -30 to +400 °C

Pack Sizes 454 g brush top 454 g brush top 454 g brush top, 454 g brush top, 400 ml aerosol, 400 ml aerosol, 400 ml aerosol, 400 ml aerosol, 907 g can3.6 kg can 6.8 kg can 113 g, 454 g brush top, 500 g can, 500 g can 1 kg can

3.6 kg can, 1 kg can, 5 kg can, 20 g stick 20 g stick

Approvals American Bureau PMUC – – MIL-PRF-907E SECLF 216 SECLF 216 8154: H2 NSF Reg. No.: FDA 21 CFR 178-3570of Shipping certified D5OYP12 General Electric 122982 H1 NSF Reg. No.:

MIL-PRF-907E TIL 1117-3R1 123004

Loctite® 8023 brush topAnti-Seize with ultima-te wash out resistance.

Loctite® 8013 brush topHigh Purity metal free Anti-Seize with excel-lent chemical resi-stance. Recommendedfor stainless steel.Ideal for use in thenuclear industry.

Loctite® 8009 brush topMetal free Anti-Seize providing a long term lubrication on all metalsincluding stainless steel and titanium.

Loctite® 8012 brush topMoS2 assembly paste ensures maximumlubricity, gives goodresistance to extreme-ly high loads and isideal for protection ofparts during running inor cold start.

Need food approval?

Standard applications

No

Solution


8150/8151 Aluminium,copper & graphite

8060Aluminium & graphite

32

7500

Surface Treatment and Rust Prevention

Rust treatment

8005

Belt dressing

33

Cathodic protection

7800/7922

Description Liquid spray Rust treatment Zinc spray Varnish spray Metal protection coating

Colour Colourless Matt black Grey Blue Amber

Temperature Range -30 to +250 °C N.A. -50 to +550 °C -10 to +80 °C -10 to +40 °C

Pack Sizes 400 ml aerosol 1 litre can 400 ml aerosol 400 ml aerosol 400 ml aerosol

Removable Non Drying

78037802

Corrosion protection

General purpose

Surface Treatment and Rust Prevention■ Stabilize existing rust■ Guard against corrosion■ Prevent electro-chemical corrosion■ Increase belt friction

Loctite® 7500Rust treatmentConverts existing rust into a stable base.

Cured product acts as a primer ready for painting.

Protect surfaces from corrosion.

Use on metal pipes, valves, fittings, storage tanks, fen-ces, guard rails, conveyors,construction and agriculturalequipment.

Loctite® 8005Belt dressingRecommended to preventslippage and increase frictionfor all types of belts.

It extends belt life.


Loctite® 7800 Zinc spray shinyLoctite® 7922 Zinc spray mattProvides excellent cathodic protection on ferrous metals.

Can be used as a primer prior to painting.

Especially suitable for pro-tecting welds from corrosionon galvanised parts.

Loctite® 7802Varnish sprayEasy to remove coating that provides long term protection.

Protects equipment such as cutting and stamping tools in perfect condition duringindoor and outdoor storage.

Loctite® 7803 Metal protection coating sprayNon drying, tack free coating which provides long term corrosion protection.

Is compatible with most plastics and elastomericmaterials.

Long term protection ofmetal assemblies such asmoulds, machines andoutdoor installations.

Solution

Handy Hints:Use Loctite® 3029 HardenerLoctite® 3029 Hardener initiates and speeds the cure of Loctite® Polyester resin based productsAdd the hardener to the resin in the recommended proportions and mix thoroughly

3534

Repair, rebuild or join Fibre Reinforced Plastic parts

3022 3024 3026

Bridge and seal large gaps and

holes

3028

Repair osmosis blisters and small

holes

Strong structural repair

Fit and repair panels and stiffeners

3025

Fill and seal largegaps and cracks

Description Glassfibre Paste Gelcoat Filler Marine Filler Marine Epoxy Glass Fibre Resin Kit

Colour Blue/Green White White White/Grey Semitransparent Gold

GRP*, Steel, Aluminium Yes Yes Yes Yes Yes

Enamel No Yes No No No

Wood Yes No Yes Yes Yes

Stainless Steel No No No Yes No

Mix Ratio by wt. 97 to 3 96 to 4 97 to 3 1 to 1 96 to 4

Working time 8 min. 8 min. 6 min. 15 min. 5 min.

Setting time at 20 °C 10 min. 10 min. 10 min. 60 min. 10 min.

Sandable after at 20 °C 20 min. 60 min. 20 min. Cure time 240 min. 20 min.

Pack Sizes 165 g, 750 g 165 g 150 g, 665 g 150 g Kit


Loctite® 3024Gelcoat FillerTwo part Polyester resin.Can be over-painted to match topside colour scheme.Can be combined with Loctite®

3025 for larger repairs.Fully cured in 60 min. to awaterproof, hard, white finish.Specially formulated for minordamage (osmosis blisters, scratches and small holes) in glass fibre and enamelled surface finishes.

■ Repair fibre- or glass-reinforced plastics, wood or metal parts■ Fill and seal cracks, holes and other gaps■ Products are waterproof and paintable■ Repairs can be sanded, shaped and machined■ Join and repair structural panels and stiffeners

Loctite® 3028Glass Fibre Resin KitTwo part Polyester resin with reinforcingglass fibre mat.The kit contains resin, hardener, glassfibre mat, mixing cup, spatula and brush.Sets in 10 min.; fully cured after 30 min.Recommended for joining different materials such as wooden bulkheads toGRP* hulls or metals and plastics. Enables the formation of a tough, gap-filling fillet where stiffeners and panels arejoined.

Loctite® 3022Glass Fibre PasteTwo part, glass fibre reinforcedPolyester paste.High strength bond for structural repair.Extremely water-resistant.Sets in 10 min.; can be sandedafter another 10 min. Recommended for repairingholes and gaps up to 50 mm inGRP*, aluminium, steel andwood.

Loctite® 3026Marine Epoxy Two part epoxy.Makes a strong and durable repair.Waterproof, fuel-resistant, paint compatible.Sets in 60 min.; fully curedin 4 hrs. Do not apply a polyester direct-ly to Loctite® 3026 Marine Epoxy. Sealthe epoxy surface first, using a primerpaint. Ideal for between-tides repairs toferrocement and fibre-reinforced hulls,will also repair wood, steel, stainlesssteel, cast iron and aluminium components.


*GRP – Glass Fibre Reinforced Plastic

Loctite® 3025Marine Filler Two part Polyester paste.Waterresistant must be over-painted if used below the waterline.Paint-compatible.Sets in 10 min.; can be machi-ned, drilled, tapped and sandedin further 10 min.Recommended for filling andsealing large holes and cracks inhull materials such as glassfibre, steel, aluminium andwood.

Solution

Description 2K-Epoxy 2K-Epoxy 2K-Epoxy 2K-Epoxy 2K-Epoxy 2K-Epoxy

Mix ratio by volume 1:1 1:1 1:1 1:1 1:1 1:1

Mix ratio by weight 100 : 100 100 : 100 100 : 100 100 : 100 100 : 100 100 : 100

Working life 45 min. 45 min. 6 min. 45 min. 40 min. 45 min.

Fixture time 180 min. 180 min. 15 min. 180 min. 150 min. 180 min.

Colour Grey Grey Grey Grey Grey Grey

Viscosity Putty Liquid Putty Putty Putty Putty

Shear strength (GBMS) 20 N/mm2 25 N/mm2 20 N/mm2 20 N/mm2 20 N/mm2 20 N/mm2

Compressive strength 70 N/mm2 70 N/mm2 60 N/mm2 70 N/mm2 90 N/mm2 70 N/mm2

Operating temperature Up to 120 °C Up to 120 °C Up to 120 °C Up to 120 °C Up to 190 °C Up to 120 °C

Pack sizes 500 g Tub Kit 500 g Tub Kit 500 g Tub Kit 500 g Tub Kit 500 g Tub Kit 500 g Tub Kit

3736

Metal-filled Compounds

Loctite® Hysol® 3473 A&Bis a rapid curing, steel filled 2K-Epoxy adhesive, foremergency repairing andrebuilding worn metal parts.Ideal for repairing pipes andcastings as well as cracks in housings and machine parts.Making of moulds, models,tools and fixtures.

Loctite® Hysol® 3472 A&Bis a pourable steel filled, 2K-Epoxy adhesive, for repairingand rebuilding worn metalparts. Ideal for repairing pipes andcastings as well as cracks in housings and machine parts.Making of moulds, models, tools and fixtures.

Loctite® Hysol® 3471 A&Bis a steel filled, 2K-Epoxyadhesive, for repairing andrebuilding worn metal parts.Ideal for repairing pipes andcastings as well as cracks inhousings and machine parts.

Repair or rebuild damaged parts?

3472 A&B3471 A&B 3473 A&B 3479 A&B 3474 A&B

Loctite® Hysol® 3474 A&Bis a mineral filled, 2K-Epoxyadhesive, which forms a self-lubricating surface to reducesliding wear on moving parts.Ideal for metallic surfacesunder friction.

Wear resistantHigh temperatureresistant

3475 A&B

Loctite® Hysol® 3479 A&Bis an aluminium filled, 2K-Epoxy adhesive, for repairing and rebuildingworn metal parts in high operating temperature applications. Ideal for repairing castingsand cracks in housings andmachine parts.

Loctite® Hysol® 3475 A&Bis an aluminium filled, 2K-Epoxy adhesive, for repairingand rebuilding worn metalparts. Ideal for repairingcastings and cracks in housings and machineparts.

■ High compressive strength■ Choice of mild steel or aluminium fillers■ Can be machined, drilled or tapped after cure■ Excellent resistance to aggressive chemicals

Multi purpose

Aluminium Metallic parts under friction

PourablePutty Fast cure

What material are you filling?

Solution

Steel

(Metal Set S1) (Metal Set S2) (Metal Set S3) (Metal Set A1) (Metal Set HTA) (Metal Set M)


3938

Description High temperature High impact High temperature High temperaturewearing compound wearing compound pneu wear brushable ceramic

Colour Grey Grey Grey Grey

Maximum Temperature 230 °C 120 °C 230 °C 205 °C

Mix Ratio by Volume 4 to 1 2 to 1 4 to 1 2.75 to 1

Working Time 30 min. 30 min. 30 min. 30 min.

Cure Time 7 to 9 hrs* 6 hrs 6 to 8 hrs* 8 to 14 hrs*

Pack Sizes 10 kg Kit 1 kg Kit 10 kg Kit 1 kg Kit

7230 7229

High temperatureup to 205 °C

High temperatureup to 230 °C

Thin filmThick layer

7234

High temperatureup to 230 °C High impact

Pneumatic abrasion

FineCoarse

Repair or rebuild worn surfaces

7219

Fine or coarse particle abrasion?

Wearing Compounds

■ Restores worn surfaces■ Wear resistant coating■ Use on new parts to extend life■ Available in both trowelable and brushable forms

Loctite® 7230 High temperature wearing compoundTrowelable compound thatprotects against sliding abrasion.

Use to rebuild and protectchutes, pump housings,elbows, cyclones and material handling equipment.

Loctite® 7229High temperature pneu wearResists fine particle abrasion caused in pipe elbows of pneumatic conveyorsystems.

Loctite® 7219 High impact wearing compoundToughend adhesive absorbs impacts.

Recommended where both sliding abrasion and impacts are present.

Solution

Loctite® 7234 High temperature brushable ceramicSmooth, wear, resistant, low friction coating to combat turbulence and cavitation on components such as pump housings and impellors.

* Require heat cure for maximum temperature resistance


4140

70637200*Gasket Remover

Do you need a hand cleaner or a parts/surface cleaner?

Yes

7850

Hand cleaner

General purpose

7855

For ink paint or resin on hands

Large surfaces i.e. worktops

7840*

Yes

No

Description Hand cleaner Hand cleaner Contact cleaner spray Gasket remover Cleaner and degreaser Cleaner Cleaner and degreaser

Pack Sizes 400 ml bottle, 400 ml bottle, 400 ml aerosol 400 ml aerosol 400 ml aerosol, 1 litre can 750 ml trigger spray,1.75 litre pump 3 litre pump 10 litre can, 5 litre can,

dispenser dispenser 200 litre drum 20/200 litre drum

7039

Are you cleaning electrical contacts?

Parts/surface cleanerParts i.e. machined components

General parts pipe cleaner

No

Are you removing old gaskets?

7044

U-PVCpipe cleaner

Cleaning■ Clean components prior to using Henkel Loctite Adhesives/Sealants■ Clean and degrease worktops and parts ■ Remove cured Sealant residue■ The hand cleaner sub-section includes two very effective, gentle

and biodegradable hand cleaners

Loctite® 7039 Contact cleaner sprayDoes not affect insulating varnishes. For cleaning electrical contacts, relays,switchgear etc. withoutaffecting insulating varnishes. Displaces moisture andforms a water repellant film.

Loctite® 7063Cleaner & degreaserGeneral parts cleaner which leaves no residue - ideal for use prior to adhesive bonding and sealing applications.Compatible with metal,glass, rubber, most plasticsand painted surfaces.

Loctite® 7200Gasket removerRemoves cured gasketsealants and traditionalgaskets from most types ofsurfaces in 10 to 15 minutes without scraping.

Loctite® 7840Cleaner & degreaserBiodegradable, solvent free, non-toxic and non flamma-ble, diluted with water.

Rated USFA-C1.

Removes grease, oil, cutting fluids and workshop grime.

* For best product peformance clean parts with Loctite® 7063 prior to adhesive application

Loctite® 7850 Hand cleanerHand cleaner made fromnatural extracts and free frommineral oils. Biodegradable.Contains premium skin conditioners. Works with orwithout water. Removes ground-in dirt, grease, grime,and oil.

Loctite® 7855 Hand cleanerRemoves paint, resin andadhesives. Biodegradableand non toxic.


Solution

Loctite® 7044 U-PVC pipe cleanerProduct 7044 is a non-aqueous, non-CFC solventdesigned for cleaning anddegreasing of PVC pipe surfaces before bonding with Loctite® 5004.

4342

Do you need an activator or primer?

7251 7252 7458 7240

In combination with222, 243, 2701, 290,

510, 518, 5203, 5205, 5208, 542, 572, 577,

603, 638, 641, 648 or 660

7253

In combination with 5221, 5225, 5226

Improve adhesion to specific surfacesAccelerate cure?Large gap fill or

Temperature <5°C?

7239

Description Primer Primer Primer Primer Activator ActivatorColour Black Black Colourless Colourless Colourless Blue-greenPack Sizes 25 ml, 200 ml 25 ml, 200 ml 25 ml, 200 ml 4 ml 500 ml 90 ml pump

Increase cure speed of

Instant Adhesivessuch as, 401, 406, 431, 454

and 4850In combination with

401, 406, 431, 454, 480 or 4850

Improve adhesion to difficult-to-bond materials e.g.

PE, PP, PTFE, Santoprene®

or thermoplastic rubbers

Surface Preparation – Activators and Primers

Primer Loctite® 7253Bonding/sealing bare metallic surfaces.

Loctite® 7239Is a general purpose Primer, suitable for use on all industrial plastics, which willimprove the adhesion ofInstant adhesives.

Loctite® 7240Is a solvent-free activatorthat increases cure speed onpassive surfaces such as,stainless steel, aluminiumand plated or passivatedmetals.

Primer Loctite® 7252Bonding/sealing glass &glazed materials.

Primer Loctite® 7251Bonding/sealing plastics, painted materials and wood.

■ Accelerate cure of Henkel Loctite products even at low temperatures■ Improve adhesion to non-wetting surfaces

Solution


Loctite® 7458Cures excess adhesive.

Minimizes post cure bloo-ming and optimizes bondstrength.

Low-odour.

Recommended for any areaswhere the speed of cure andaesthetics requirements arecritical to ensure a neat andconsistent bond-line.

4544

3463 50707100

Emergency Repair

O-Ring Kit5007

Replace or repair O-ring seals

Gap/void filling or pipe insulation Detect gas leak?

Fill holes, smoothwelds, repair non-structural defects?

Stop pipe leaks?

Emergency Repair Products■ Enables rapid repair of damaged or burst pipes, conveyor or

drive belts and similar rubber-based components■ Will seal leaks in tanks and other containment vessels in addition to

repairing metal parts■ Includes a kit for repairing or replacing damaged O-ring seals

and a gas leak detector

Loctite® 3463Metal Magic Steel™ stickWorking time 3 minutes -sets in 10 minutes. Steel filled kneedable stick.Adheres to damp surfacesand cures underwater. Chemical and corrosionresistant.

Can be drilled, filed andpainted.

It is ideal for emergency sealing of leaking tanks andpipes.

Smoothes welds, repairssmall cracks in castings andfills oversized bolt holes.ANSI/NSF Standard 61.

Loctite® 5070 Pipe Repair kitRepairs pipe leaks in 1 hour.

No tools required.

Maximum temperature120 °C.

Easy-to-use repair kit.

Use for temporary/mediumterm repair of leaking pipesand reinforcement of weakareas.

Kit contains protectivegloves, Loctite® 3463 MetalMagic Steel™ Stick, and urethane-impregnated GRPtape.

Loctite® 7100Leak DetectorFacilitates the detection ofboth micro-leaks and largerleaks in gas handlingsystems.

It will not cause subsequent corrosion and is recommen-ded for use with all gasesand gas mixtures exceptpure oxygen.

Loctite®

O-Ring kitSaves the need for complete disassembly.

Eliminates the need for aninventory of different sizedO-rings.

Joints resist water/oil and are as strong as the rubber itself.

Kit contains: 7 standard diameter sizes of nitrile cord,splicing jig, safety knife andLoctite® 406 instant adhesive.

Loctite® 5007PU-FoamIs a moisture-curing poly-urethane foam, whichexpands to fill and seal gapsand voids.

Recommended for sealingpipe entries in walls, insulating pipe-work andtanks, filling gaps around doors and windows,draught-proofing aroundpipework and cable runs.

Cured material can bemachined, sanded and painted.


Solution

46

Loctite® 97002 Hand-Held Cartridge Applicator (pneumatic)Dispenses all Henkel Loctite products packaged in a250 ml squeeze tube or in a300 ml cartridge.

Loctite® 97001Peristaltic Hand PumpThis hand-held applicator isa low-cost, precision bottletop applicator that mountseasily on the top of any Loc-tite® 50 ml or 250 ml bottle.

Loctite® 97006 Digital Syringe Dispenser SystemThis is a fully-integratedsystem that will dispenseproducts from water-thin topaste-thick from 10 ml plasticsyringes.

Loctite® 97262Needle Selection PackSelection of dispensingneedles which are used forthe application of HenkelLoctite products.

Equipment

■ Henkel Loctite dispensing equipment is specially designed to make application and use of Henkel Loctite products fast, precise, clean and economical

■ The following is a selection, from an extensive equipment range, of items most relevant to the products in this guide

Loctite® 97008Semi-automatic ControllerLoctite® 97009Semi-automatic ControllerFully integrated semi-auto-matic adhesive dispensingsystems.

Loctite® 96001 Dual Cartridge DispenserLoctite® 96003 Dual Cartridge DispenserAutomatically mix Loctite®

structural adhesives in theircorrect proportions. Applica-tion is done without waste, inquantities determined by pro-duction needs

Loctite® 97121 Pinch valve ApplicatorA Pinch-valve with a pneu-matic actuator for use withLoctite® 97008 and 97009.

Loctite® 97033 UV Wand SystemHigh intensity spot curingsystem designed to emit UVAand visible light (blue light) for extremely fast curing.Ideal for high-volume production and short cycletimes.

Loctite® 97035 UVALOC Flood SystemIs a high intensity, bench top modular light cure system. Itis equipped with a 1000 Wmetal halide lamp. Designedto emit UVA, UVC and visiblelight. 47

Product Ordering Information■ Look for Henkel Loctite Product number on these pages! * Products with

NSF approval

Pr.-No. Product Name Pack-Size Order-No. IDH-No. Page Pr.-No. Product Name Pack-Size Order-No. IDH-No. Page

222 Threadlocker, Low Strength* 12 x 10 ml 267358 267358 10

222 Threadlocker, Low Strength* 50 ml 231501 231501 10

222 Threadlocker, Low Strength* 250 ml 267359 267359 10

243 Threadlocker, Medium Strength*, Liquid 12 x 10 ml 135279 135279 11

243 Threadlocker, Medium Strength*, Liquid 50 ml 135278 135278 11

243 Threadlocker, Medium Strength*, Liquid 250 ml 135357 135357 11

248 Threadlocker, Medium Strength*, Semi-Solid 9 g stick TBC TBC 11

248 Threadlocker, Medium Strength*, Semi-Solid 19 g stick TBC TBC 11

268 Threadlocker, High Strength*, Semi-Solid 9 g stick TBC TBC 11

268 Threadlocker, High Strength*, Semi-Solid 19 g stick TBC TBC 11

270 Threadlocker, High Strength*, Liquid 12 x 10 ml 267380 267380 11

270 Threadlocker, High Strength*, Liquid 50 ml 232515 232515 11

270 Threadlocker, High Strength*, Liquid 250 ml 267381 267381 11

2701 Threadlocker, High Strength, Liquid 10ml TBC TBC 11

2701 Threadlocker, High Strength, Liquid 50ml 234853 234853 11

2701 Threadlocker, High Strength, Liquid 250 ml 234855 234855 11

290 Threadlocker,Wicking 12 x 10 ml 267397 267397 10

290 Threadlocker,Wicking 50ml 233733 233733 10

290 Threadlocker,Wicking 250 ml 267398 267398 10

302 UV Adhesive 250 ml 88468 88468 20

3020 Gaskets Adhesive, Aerosol 400 ml 458645 458645 14

3022 Glass fibre Paste 165 g ** ** 34

3022 Glass fibre Paste 750 g ** ** 34

3024 Gelcoat Filler 165 g ** ** 34

3025 Marine Filler 150 g ** ** 35

3025 Marine Filler 665 g ** ** 35

3026 Marine Epoxy 150 g ** ** 35

3028 Glass Fibre Resin Kit Kit ** ** 35

322 UV Adhesive 250 ml 88301 88301 21

330 MULTI-BOND® Kit* 50/18 ml 230054 230054 22

330 Structural Adhesive, Toughened, non-mix* 315 ml 135407 135407 22

3421 A&B Structural Adhesive, General Purpose 50 ml 248211 248211 22



3421 A Structural Adhesive, General Purpose 1kg 431949 431949 22

3421 A Structural Adhesive, General Purpose 20 kg 431948 431948 22

3421 B Structural Adhesive, General Purpose 1kg TBC TBC 22

3421 B Structural Adhesive, General Purpose 20 kg TBC TBC 22

3430 A&B Structural Adhesive, Fast cure 2 x 24 ml 142517 142517 23

3430 A&B Structural Adhesive, Fast cure 50 ml TBC TBC 23

3430 A&B Structural Adhesive, Fast cure 200 ml TBC TBC 23

3430 A Structural Adhesive, Fast cure 1 kg TBC TBC 23

3430 B Structural Adhesive, Fast cure 1 kg TBC TBC 23

3450 A&B Structural Adhesive, Fast cure 2 x 25 ml 229177 229177 23

3463 Metal Magic Steel™ Stick 114 g 265628 265628 45

3471 A&B Metal Set S1, Putty 500 g 229176 229176 36

3472 A&B Metal Set S2, Pourable 500 g 229175 229175 36

3473 A&B Metal Set S3, Fast Cure 500 g 229174 229174 37

3474 A&B Metal Set M,Wear Resistant 500 g 195891 195891 37

3475 A&B Metal Set A1, Multi Purpose 500 g 229173 229173 37

3479 A&B Metal Set HTA, High Temperature Resistant 500 g 195826 195826 37

350 UV Adhesive 50 ml 267423 267423 21

350 UV Adhesive 250 ml 195551 195551 21

352 UV Adhesive 250 ml 195552 195552 21

401 Instant Adhesive, General Purpose* 10 x 3 g 87993 87993 19

401 Instant Adhesive, General Purpose* 20 g 135428 135428 19



406 Instant Adhesive, Elastomers 20 g 233695 233695 18

406 Instant Adhesive, Elastomers 500 g 135438 135438 18

4062 Instant Adhesive, Wicking 20 g 152922 152922 19

4062 Instant Adhesive, Wicking 500 g 234075 234075 19

431 Inst. Adhesive, General Purpose, High viscosity 20 g 261800 261800 19

431 Inst. Adhesive, General Purpose, High viscosity 500 g 234053 234053 19

454 Instant Adhesive, General Purpose Gel* 10 x 10 ml 231100 231100 18

454 Instant Adhesive, General Purpose Gel* 20 g 195678 195678 18



(Collapsable Cartridge)

480 Instant Adhesive, Peel Resistant 20 g 135250 135250 18

480 Instant Adhesive, Peel Resistant 500 g 135253 135253 18

4850 Flexible Instant Adhesive 20 g 373358 373358 19

4850 Flexible Instant Adhesive 500 g 373354 373354 19

5004 Thread Sealant, Plastic 125 g ** ** 12



5007 PU-Foam, white 600 ml 402690 402690 44

5062 Flexible Adhesive Sealant, Low Modulus, Black 310 ml 263178 263178 25

5063 Flexible Adhesive Sealant, Low Modulus, Grey 310 ml 263183 263183 25

5064 Flexible Adhesive Sealant, Low Modulus, White 310 ml 263188 263188 25

5065 Flex. Adhesive Sealant, Medium Modulus, Black 310 ml 263192 263192 25

5066 Flex. Adhesive Sealant, Medium Modulus, Grey 310 ml 263193 263193 25

5068 Flex. Adhesive Sealant, Medium Modulus, White 310 ml 265544 265544 25

5069 Flex. Adhesive Sealant, High Modulus, Black 310 ml 263196 263196 25

5070 Pipe Repair Kit 2” x 6’ Kit 255861 255861 45

510 Flange Sealant, Rigid Parts* 50 ml 135475 135475 15



5145 Flexible Adhesive Sealant, Non corrosive 40 ml 88318 88318 24

5145 Flexible Adhesive Sealant, Non corrosive 300 ml 335811 335811 24



5203 Flange Sealant, Low Strength 50 ml 388178 388178 14

5203 Flange Sealant, Low Strength 300 ml 170682 170682 14

5205 Flange Sealant, Aluminium 50 ml 388179 388179 15

5205 Flange Sealant, Aluminium 300 ml 191315 191315 15

5221 Flexible Adhesive Sealant, Grey 12 x 300 ml 231029 231029 25

5225 Flexible Adhesive Sealant, White 12 x 300 ml 400827 400827 25

5226 Flexible Adhesive Sealant, Black 12 x 300 ml 400831 400831 25

5331 Thread Sealant, Plastic* 100 ml 142492 142492 13

5366 Flexible Adhesive Sealant, Clear 310 ml 142494 142494 24

5367 Flexible Adhesive Sealant, White 310 ml 142493 142493 24

5368 Flexible Adhesive Sealant, Black 310 ml 142495 142495 24

5398 Flex. Adhesive Sealant, High temperature, Red 310 ml 195794 195794 24

5399 Flex. Adhesive Sealant, High temperature, Red 310 ml 231230 231230 25

542 Thread Sealant, Hydraulic and pneumatic 12 x 10 ml 135483 135483 13

542 Thread Sealant, Hydraulic and pneumatic 50 ml 267431 267431 13

542 Thread Sealant, Hydraulic and pneumatic 250 ml 267432 267432 13

55 Pipe Sealing Cord* 50 m 483283 483283 12

55 Pipe Sealing Cord* 150 m 270153 270153 12

5699 Flange Sealant, Big gaps/Glycol resistant* 300 ml 135270 135270 15

561 Thread Sealant 19 g stick TBC TBC 13

572 Pipe Sealant, Slow curing 50 ml 229360 229360 13

572 Pipe Sealant, Slow curing 250 ml 135495 135495 13

574 Flange Sealant 50 ml 267437 267437 14

574 Flange Sealant 250 ml 135500 135500 14

577 Pipe Sealant, General Purpose * 50ml 229342 229342 13

577 Pipe Sealant, General Purpose * 250 ml 234573 234573 13

5910 Flange Sealant, Big gaps/Flexible 300 ml 142491 142491 15

603 Retainer, High Strength, oil tolerant* 12 x 10 ml 229873 229873 17

■ Look for Henkel Loctite Product name on these pages!

Product Ordering Information

48 49

* Products with NSF approval

603 Retainer, High Strength, oil tolerant* 50 ml 135280 135280 17

603 Retainer, High Strength, oil tolerant* 250ml 88573 88573 17

638 Retainer, High Strength* 50 ml 234795 234795 17

638 Retainer, High Strength* 250 ml 234811 234811 17

641 Retainer, Medium Strength 12 x 10 ml 267442 267442 17

641 Retainer, Medium Strength 50 ml 135522 135522 17

641 Retainer, Medium Strength 250ml 135523 135523 17

648 Retainer, High Temperature 50 ml 234880 234880 17

648 Retainer, High Temperature 250ml 267443 267443 17

660 Retainer, Large gap repair* 12 x 50 ml 229232 229232 16

7039 Contact Cleaner Spray, Aerosol 12 x 400 ml 142538 142538 40

7044 U-PVC Pipe Cleaner 1 lt ** ** 41

7063 Small Parts Cleaner Aerosol 400 ml 458648 458648 41

7063 Small Parts Cleaner Pump 400 ml 195814 195814 41

7063 Small Parts Cleaner 10 149293 149293 41

7063 Small Parts Cleaner 200 250179 250179 41

7100 Leak Detector Spray 400 ml 399181 399181 45

7200 Gasket Remover, Aerosol 400 ml 458654 458654 41

7219 High Impact Wearing Compound 1 kg 255891 255891 39

7229 High Temperature Pneu Wear 10 kg 255895 255895 39

7230 High Temperature Wearing Compound 10 kg 255896 255896 38

7234 High Temperature Brushable Ceramic Grey 1 kg 254469 254469 39

7239 Plastics Primer, CA (all plastics) 4ml 333359 333359 43

7240 Activator, Anaerobics 90 ml 333369 333369 43

7251 PU Primer, Plastics, Painted Metal 10 x 25ml 229911 229911 42

7251 PU Primer, Plastics, Painted Metal 10 x 200 ml ** ** 42

7252 PU Primer, Glass 10 x 25ml 229915 229915 42

7253 PU Primer, Unpainted Metal 10 x 25 ml 229994 229994 42

7253 PU Primer, Unpainted Metal 10 x 200 ml 229998 229998 42

7458 Activator 500 ml 373363 373363 43

7500 Rust Treatment Coating 1 lt 303403 303403 32

7800 Zinc Spray, Shiny 12 x 400 ml 150740 150740 33

7802 Varnish Spray Coating, Aerosol 12 x 400 ml 142535 142535 33

7803 Metal Protection Spray Coating 12 x 400 ml ** ** 33

7840 Large Parts Cleaner (water based) 200 235343 235343 41

7840 Large Parts Cleaner (water based) 12 x 750 ml 235330 235330 41

7840 Large Parts Cleaner (water based) 20 235341 235341 41

7840 Large Parts Cleaner (water based) 4x5 lt. 235338 235338 41

7850 Hand Cleaner 4x3 lt. 234258 234258 40

7850 Hand Cleaner 12 x 400 ml 234228 234228 40

7850 Hand Cleaner 2x10 88239 88239 40

7855 Hand Cleaner, Paint, Resin 12 x 400 ml 235321 235321 40

7855 Hand Cleaner, Paint, Resin 1.75 lt 235320 235320 40

7922 Zinc Spray, Matt, Aerosol 12 x 400 ml ** ** 33

8001 Mineral Oil Spray* 400 ml ** ** 26

8005 Belt Dressing, Aerosol 400 ml 458643 458643 32

8007 C5-A® Copper Anti-Seize, Aerosol 400 ml 255851 255851 31

8008 C5-A® Copper Anti-Seize, Brush Top 113g 503392 503392 31

8008 C5-A® Copper Anti-Seize, Brush Top 454g 503147 503147 31

8008 C5-A® Copper Anti-Seize 3.6 kg 503148 503148 31

8009 Heavy Duty Anti-Seize, Brush Top 454g 504219 504219 30

8009 Heavy Duty Anti-Seize 3.6 kg 504233 504233 30

8011 High Temperature chain oil spray* 400 ml ** ** 27

8012 Moly Paste, Brush Top 454g 504336 504336 30

8012 Moly Paste 6.8 kg 505464 505464 30

8013 N-7000 High Purity Anti-Seize, Brush Top 454g 504588 504588 30

8014 Food Grade Anti-Seize* 907g 505467 505467 31

8018 Solvo Rust, Aerosol 12 x 400 ml 458647 458647 27

8021 Silicone oil, Aerosol 12 x 400 ml 458646 458646 27

8023 Marine Grade, Anti-Seize, Brush Top 454 g 504618 504618 30

8031 Cutting oil, Aerosol 12 x 400 ml ** ** 27

8060 Aluminium Anti-Seize 20 g stick 525113 525113 31

8065 C5-A® Copper Anti-Seize 20 g stick 525380 525380 31

8101 Chain Lubricant, Aerosol 400 ml ** ** 29

8102 High Performance Grease 400 g ** ** 29

8102 High Performance Grease 6x1 lt ** ** 29

8103 MoS2 Grease 400 g ** ** 29

8103 MoS2 Grease 6x1 lt ** ** 29

8104 Food Grade Silicone Grease* 6x1 lt 142550 142550 28

8105 Food Grade Mineral Grease* 400 ml ** ** 28

8150 Aluminium Anti-Seize 500 g 303147 303147 31

8150 Aluminium Anti-Seize 1 kg TBC TBC 31

8150 Aluminium Anti-Seize 5 kg TBC TBC 31

8151 Aluminium Anti-Seize, Aerosol 400 ml 303136 303136 31

8153 Metal free Anti-Seize, Aerosol 400 ml 142531 142531 31

8154 MoS2 Assembly Spray, Aerosol* 400 ml 303135 303135 31

8155 MoS2 Assembly Paste 1kg 142725 142725 31

8156 Metal free Anti-Seize 500 g 303146 303146 31

8191 MOS2 Anti-friction, Aerosol 400 ml ** ** 26

8192 Food Grade PTFE Coating, Aerosol* 400 ml ** ** 26

8201 Five Way Spray, Aerosol 12 x 400 ml 142730 142730 27

9466 A&B Structural Adhesive, Thoughened 50 ml 451198 451198 23

9466 A&B Structural Adhesive, Thoughened 200 ml TBC TBC 23

9466 A&B Structural Adhesive, Thoughened 400 ml 451200 451200 23

9466 A Structural Adhesive, Thoughened 1kg 446309 446309 23

9466 B Structural Adhesive, Thoughened 1kg 446320 446320 23

9466 A Structural Adhesive, Thoughened 20 kg 537824 537824 23

9466 B Structural Adhesive, Thoughened 17 kg 537825 537825 23

9492 A&B Structural Adhesive, High Temperature 50 ml 468286 468286 23

9492 A&B Structural Adhesive, High Temperature 400 ml 468314 468314 23

96001 Epoxy Dual Cartridge Dispenser 50 ml 267452 267452 46

96003 Epoxy Dual Cartridge Dispenser 200 ml 267453 267453 46

97001 Peristaltic Hand Pump eq 88631 88631 46

97002 300 ml Pneumatic Cartidge Dispenser eq 88632 88632 46

97006 Digital Syringe Dispensing System eq 88633 88633 46

97008 Integrated Semi-Automatic Dispensing System 2 lt 215844 215844 46

97009 Integrated Semi-Automatic Dispensing System 2 lt 215845 215845 46

with Low Level Sensor

97033 UV Wand System DC eq 236377 236377 46

97035 UVALOC 1000 Cure Chamber eq 307079 307079 46

97121 Pinch Valve Applicator eq 88650 88650 46

97262 Needle Variety Kit Kit 218288 218288 46

O-Ring Kit Kit 480166 480166 44

300 ml Pneumatic Cartidge Dispenser 97002 eq 88632 88632 46

Activator 7458 500 ml 373363 373363 43

Activator, Anaerobics 7240 90 ml 333369 333369 43

Aluminium Anti-Seize 8060 20 g stick 525113 525113 31

Aluminium Anti-Seize 8150 500 g 303147 303147 31

Aluminium Anti-Seize 8150 1 kg TBC TBC 31

Aluminium Anti-Seize 8150 5 kg TBC TBC 31

Aluminium Anti-Seize, Aerosol 8151 400 ml 303136 303136 31

Belt Dressing, Aerosol 8005 400 ml 458643 458643 32

C5-A® Copper Anti-Seize 8008 3.6 kg 503148 503148 31

C5-A® Copper Anti-Seize 8065 20 g stick 525380 525380 31

C5-A® Copper Anti-Seize, Aerosol 8007 400 ml 255851 255851 31

C5-A® Copper Anti-Seize, Brush Top 8008 113g 503392 503392 31

C5-A® Copper Anti-Seize, Brush Top 8008 454g 503147 503147 31

Chain Lubricant, Aerosol 8101 400 ml ** ** 29

Contact Cleaner Spray, Aerosol 7039 12 x 400 ml 142538 142538 40

Cutting oil, Aerosol 8031 12 x 400 ml ** ** 27

Digital Syringe Dispensing System 97006 eq 88633 88633 46

Epoxy Dual Cartridge Dispenser 96001 50 ml 267452 267452 46

Epoxy Dual Cartridge Dispenser 96003 200 ml 267453 267453 46

Five Way Spray, Aerosol 8201 12 x 400 ml 142730 142730 27

Flange Sealant 574 50 ml 267437 267437 14

Flange Sealant 574 250 ml 135500 135500 14

Flange Sealant, Aluminium 5205 50 ml 388179 388179 15

Flange Sealant, Aluminium 5205 300 ml 191315 191315 15

Flange Sealant, Big gaps/Flexible 5910 300 ml 142491 142491 15

Flange Sealant, Big gaps/Glycol resistant* 5699 300 ml 135270 135270 15

Flange Sealant, Low Strength 5203 50 ml 388178 388178 14

Flange Sealant, Low Strength 5203 300 ml 170682 170682 14

Flange Sealant, Rigid Parts* 510 50 ml 135475 135475 15





Flex. Adhesive Sealant, High Modulus, Black 5069 310 ml 263196 263196 25

Flex. Adhesive Sealant, High temperature, Red 5398 310 ml 195794 195794 24

Flex. Adhesive Sealant, High temperature, Red 5399 310 ml 231230 231230 25

Flex. Adhesive Sealant, Medium Modulus, Black 5065 310 ml 263192 263192 25

Flex. Adhesive Sealant, Medium Modulus, Grey 5066 310 ml 263193 263193 25

Flex. Adhesive Sealant, Medium Modulus, White 5068 310 ml 265544 265544 25

Flexible Adhesive Sealant, Black 5226 12 x 300 ml 400831 400831 25

Flexible Adhesive Sealant, Black 5368 310 ml 142495 142495 24

Flexible Adhesive Sealant, Clear 5366 310 ml 142494 142494 24

Flexible Adhesive Sealant, Grey 5221 12 x 300 ml 231029 231029 25

Flexible Adhesive Sealant, Low Modulus, Black 5062 310 ml 263178 263178 25

Flexible Adhesive Sealant, Low Modulus, Grey 5063 310 ml 263183 263183 25

Flexible Adhesive Sealant, Low Modulus, White 5064 310 ml 263188 263188 25

Flexible Adhesive Sealant, Non corrosive 5145 40 ml 88318 88318 24

Flexible Adhesive Sealant, Non corrosive 5145 300 ml 335811 335811 24

Flexible Adhesive Sealant, White 5225 12 x 300 ml 400827 400827 25

Flexible Adhesive Sealant, White 5367 310 ml 142493 142493 24

Flexible Instant Adhesive 4850 20 g 373358 373358 19

Flexible Instant Adhesive 4850 500 g 373354 373354 19

Food Grade Anti-Seize* 8014 907g 505467 505467 31

Food Grade Mineral Grease* 8105 400 ml ** ** 28

Food Grade PTFE Coating, Aerosol* 8192 400 ml ** ** 26

Food Grade Silicone Grease* 8104 6x1 lt 142550 142550 28

Gasket Remover, Aerosol 7200 400 ml 458654 458654 41

Gaskets Adhesive, Aerosol 3020 400 ml 458645 458645 14

Gelcoat Filler 3024 165 g ** ** 34

Glass fibre Paste 3022 165 g ** ** 34

Glass fibre Paste 3022 750 g ** ** 34

Glass Fibre Resin Kit 3028 Kit ** ** 35

Hand Cleaner 7850 4x3 lt. 234258 234258 40

Hand Cleaner 7850 12 x 400 ml 234228 234228 40

Hand Cleaner 7850 2x10 88239 88239 40

Hand Cleaner, Paint, Resin 7855 12 x 400 ml 235321 235321 40

Hand Cleaner, Paint, Resin 7855 1.75 lt 235320 235320 40

Heavy Duty Anti-Seize 8009 3.6 kg 504233 504233 30

Heavy Duty Anti-Seize, Brush Top 8009 454g 504219 504219 30

High Impact Wearing Compound 7219 1 kg 255891 255891 39

High Performance Grease 8102 400 g ** ** 29

High Performance Grease 8102 6x1 lt ** ** 29

High Temperature Brushable Ceramic Grey 7234 1 kg 254469 254469 39

High Temperature chain oil spray* 8011 400 ml ** ** 27

High Temperature Pneu Wear 7229 10 kg 255895 255895 39

High Temperature Wearing Compound 7230 10 kg 255896 255896 38

Inst. Adhesive, General Purpose, High viscosity 431 20 g 261800 261800 19

Inst. Adhesive, General Purpose, High viscosity 431 500 g 234053 234053 19

Instant Adhesive, Elastomers 406 20 g 233695 233695 18

Instant Adhesive, Elastomers 406 500 g 135438 135438 18

Instant Adhesive, General Purpose Gel* 454 10 x 10 ml 231100 231100 18

Instant Adhesive, General Purpose Gel* 454 20 g 195678 195678 18



(Collapsable Cartridge)

Instant Adhesive, General Purpose* 401 10 x 3 g 87993 87993 19

Instant Adhesive, General Purpose* 401 20 g 135428 135428 19



Instant Adhesive, Peel Resistant 480 20 g 135250 135250 18

Instant Adhesive, Peel Resistant 480 500 g 135253 135253 18

Instant Adhesive, Wicking 4062 20 g 152922 152922 19

Instant Adhesive, Wicking 4062 500 g 234075 234075 19

Integrated Semi-Automatic Dispensing System 97008 2 lt 215844 215844 46

Integrated Semi-Automatic Dispensing System 97009 2 lt 215845 215845 46

with Low Level Sensor

Large Parts Cleaner (water based) 7840 200 235343 235343 41

Large Parts Cleaner (water based) 7840 12 x 750 ml 235330 235330 41

Large Parts Cleaner (water based) 7840 20 235341 235341 41

Large Parts Cleaner (water based) 7840 4x5 lt. 235338 235338 41

Leak Detector Spray 7100 400 ml 399181 399181 45

Marine Epoxy 3026 150 g ** ** 35

Marine Filler 3025 150 g ** ** 35

Marine Filler 3025 665 g ** ** 35

Marine Grade, Anti-Seize, Brush Top 8023 454 g 504618 504618 30

Metal free Anti-Seize 8156 500 g 303146 303146 31

Metal free Anti-Seize, Aerosol 8153 400 ml 142531 142531 31

Metal Magic Steel™ Stick 3463 114 g 265628 265628 45

Metal Protection Spray Coating 7803 12 x 400 ml ** ** 33

Metal Set A1, Multi Purpose 3475 A&B 500 g 229173 229173 37

Metal Set HTA, High Temperature Resistant 3479 A&B 500 g 195826 195826 37

Metal Set M,Wear Resistant 3474 A&B 500 g 195891 195891 37

Metal Set S1, Putty 3471 A&B 500 g 229176 229176 36

Metal Set S2, Pourable 3472 A&B 500 g 229175 229175 36

Metal Set S3, Fast Cure 3473 A&B 500 g 229174 229174 37

Mineral Oil Spray* 8001 400 ml ** ** 26

Moly Paste 8012 6.8 kg 505464 505464 30

■ Look for Henkel Loctite Product number on these pages!

Product Name Pr.-No. Pack-Size Order-No. IDH-No. Page Product Name Pr.-No. Pack-Size Order-No. IDH-No. Page


Pr.-No. Product Name Pack-Size Order-No. IDH-No. Page Pr.-No. Product Name Pack-Size Order-No. IDH-No. Page

1

2

3

4

5

6

7

in inch

8

9

International Units and Imperial Units

MEASURE SI SYSTEM SUB-MULTIPLES MULTIPLES OR Values in SI

UNITS OTHER THAN SI Values in SI IMPERIAL Values in SI or other systems

inch = in = 1´´ = 2,54 cmfoot = ft = 1` = 30,48 cmyard = yd = 0,914 m

square inch = in2, sq in = 6,452 cm2

square foot = ft2, sq ft = 929,03 cm2

square yard = yd2, sq yd = 0,836 m2

1 litre = 1 x 10 -3 m 3 cubic inch = in 3, cu in = 16,387 cm 3

cubic foot = ft 3, cu ft = 0,028 m 3

cubic yard = yd 3, cu yd = 0,765 m 3

1 litre = 1,76 pints = 0,22 gallons

ounce= oz = 28,350 gpound = lb = 0,454 kgton = 2240 lb = 1016,05 kgUS ton (short ton) = 2000 lb = 907,185 kg

pound per foot = lb/ft = 1,488 kg/mpound per yard = lb/yd = 0,496 kg/mpound per cubic foot = lb/ft 3 = 16,019 kg/m 3

m/min = 1/60 m/s foot per second = ft/s = 60 ft/min = 0,305 m/s

rev per second = r/s = 2 π rad/s revolution per minute (rpm) = 2 π rad/min

kgf (or kgp) = 9,81 N = 0,981 daN pound-force = 4,448 N = 0,454 kgf

kgfm = 0,908 daNm = 9,81 Nm pound x foot = lbf.ft = 1,355 Nm = 0,138 kgfm

kgf/cm 2 = 9,81 10 4 Pa Lbf/in 2 (or psi) = 6895,00 Pa = 0,0698 bar

kgf/mm 2 = 9,81 N/mm 2 = 5,17/mm of mercury= 0,981 daN/mm 2 ton-force per square inch= 9,81 MPa = tonf/in 2 = 15,4448 Mpa

Length metre = m centimetre = cm = 10 -2 mmillimetre = mm = 10 -3 mmicron = µm = 10 -6 m

Surface metre square = m2 centimetre square = cm2 = 10 -4 m 2

area millimetre square = mm2 = 10 -6 m 2

Volume metre cube = m 3 centimetre cube = cm3 = 10 -6 m 3

decimetre cube = dm3 = 10 -3 m 3

Mass kilogramme = kg gramme = g = 10 -3 kg tonne = t = 10 3 kg

Volume mass kg/m 3 g/cm3 = 103 kg/m3 = kg/dm3

Linear speed m/s cm/s = 10 -2 m/sSpeed (rotation) rad/s –Force Newton = N dyne = dyn = 10 -5 N

decaNewton = daN = 10 NTorque (moment) Nm daNm = 10 NmPressure pascal = Pa m. bar = 10 2 Pa

bar = 10 5 Pamegapascal = MPa = 106 Pa = N/mm2

Linear mass kg/m g/cm = 10 -1 kg/m

10

11

12

Moly Paste, Brush Top 8012 454g 504336 504336 30

MOS2 Anti-friction, Aerosol 8191 400 ml ** ** 26

MoS2 Assembly Paste 8155 1kg 142725 142725 31

MoS2 Assembly Spray, Aerosol* 8154 400 ml 303135 303135 31

MoS2 Grease 8103 400 g ** ** 29

MoS2 Grease 8103 6x1 lt ** ** 29

MULTI-BOND® Kit* 330 50/18 ml 230054 230054 22

N-7000 High Purity Anti-Seize, Brush Top 8013 454g 504588 504588 30

Needle Variety Kit 97262 Kit 218288 218288 46

O-Ring Kit Kit 480166 480166 44

Peristaltic Hand Pump 97001 eq 88631 88631 46

Pinch Valve Applicator 97121 eq 88650 88650 46

Pipe Repair Kit 5070 2” x 6’ Kit 255861 255861 45

Pipe Sealant, General Purpose * 577 50ml 229342 229342 13

Pipe Sealant, General Purpose * 577 250 ml 234573 234573 13

Pipe Sealant, Slow curing 572 50 ml 229360 229360 13

Pipe Sealant, Slow curing 572 250 ml 135495 135495 13

Pipe Sealing Cord* 55 50 m 483283 483283 12

Pipe Sealing Cord* 55 150 m 270153 270153 12

Plastics Primer, CA (all plastics) 7239 4ml 333359 333359 43

PU Primer, Glass 7252 10 x 25ml 229915 229915 42

PU Primer, Plastics, Painted Metal 7251 10 x 25ml 229911 229911 42

PU Primer, Plastics, Painted Metal 7251 10 x 200 ml ** ** 42

PU Primer, Unpainted Metal 7253 10 x 25 ml 229994 229994 42

PU Primer, Unpainted Metal 7253 10 x 200 ml 229998 229998 42

PU-Foam, white 5007 600 ml 402690 402690 44

Retainer, High Strength* 638 50 ml 234795 234795 17

Retainer, High Strength* 638 250 ml 234811 234811 17

Retainer, High Strength, oil tolerant* 603 12 x 10 ml 229873 229873 17

Retainer, High Strength, oil tolerant* 603 50 ml 135280 135280 17

Retainer, High Strength, oil tolerant* 603 250ml 88573 88573 17

Retainer, High Temperature 648 50 ml 234880 234880 17

Retainer, High Temperature 648 250ml 267443 267443 17

Retainer, Large gap repair* 660 12 x 50 ml 229232 229232 16

Retainer, Medium Strength 641 12 x 10 ml 267442 267442 17

Retainer, Medium Strength 641 50 ml 135522 135522 17

Retainer, Medium Strength 641 250ml 135523 135523 17

Rust Treatment Coating 7500 1 lt 303403 303403 32

Silicone oil, Aerosol 8021 12 x 400 ml 458646 458646 27

Small Parts Cleaner 7063 10 149293 149293 41

Small Parts Cleaner 7063 200 250179 250179 41

Small Parts Cleaner Aerosol 7063 400 ml 458648 458648 41

Small Parts Cleaner Pump 7063 400 ml 195814 195814 41

Solvo Rust, Aerosol 8018 12 x 400 ml 458647 458647 27

Structural Adhesive, Fast cure 3430 A&B 2 x 24 ml 142517 142517 23

Structural Adhesive, Fast cure 3430 A&B 50 ml TBC TBC 23

Structural Adhesive, Fast cure 3430 A&B 200 ml TBC TBC 23

Structural Adhesive, Fast cure 3430 A 1 kg TBC TBC 23

Structural Adhesive, Fast cure 3430 B 1 kg TBC TBC 23

Structural Adhesive, Fast cure 3450 A&B 2 x 25 ml 229177 229177 23

Structural Adhesive, General Purpose 3421 A&B 50 ml 248211 248211 22



Structural Adhesive, General Purpose 3421 A 1kg 431949 431949 22

Structural Adhesive, General Purpose 3421 A 20 kg 431948 431948 22

Structural Adhesive, General Purpose 3421 B 1kg TBC TBC 22

Structural Adhesive, General Purpose 3421 B 20 kg TBC TBC 22

Structural Adhesive, High Temperature 9492 A&B 50 ml 468286 468286 23

Structural Adhesive, High Temperature 9492 A&B 400 ml 468314 468314 23

Structural Adhesive, Thoughened 9466 A&B 50 ml 451198 451198 23

Structural Adhesive, Thoughened 9466 A&B 200 ml TBC TBC 23

Structural Adhesive, Thoughened 9466 A&B 400 ml 451200 451200 23

Structural Adhesive, Thoughened 9466 A 1kg 446309 446309 23

Structural Adhesive, Thoughened 9466 B 1kg 446320 446320 23

Structural Adhesive, Thoughened 9466 A 20 kg 537824 537824 23

Structural Adhesive, Thoughened 9466 B 17 kg 537825 537825 23

Structural Adhesive, Toughened, non-mix* 330 315 ml 135407 135407 22

Thread Sealant 561 19 g stick TBC TBC 13

Thread Sealant, Hydraulic and pneumatic 542 12 x 10 ml 135483 135483 13

Thread Sealant, Hydraulic and pneumatic 542 50 ml 267431 267431 13

Thread Sealant, Hydraulic and pneumatic 542 250 ml 267432 267432 13

Thread Sealant, Plastic 5004 125 g ** ** 12



Thread Sealant, Plastic* 5331 100 ml 142492 142492 13

Threadlocker, High Strength*, Liquid 270 12 x 10 ml 267380 267380 11

Threadlocker, High Strength*, Liquid 270 50 ml 232515 232515 11

Threadlocker, High Strength*, Liquid 270 250 ml 267381 267381 11

Threadlocker, High Strength*, Semi-Solid 268 9 g stick TBC TBC 11

Threadlocker, High Strength*, Semi-Solid 268 19 g stick TBC TBC 11

Threadlocker, High Strength, Liquid 2701 10ml TBC TBC 11

Threadlocker, High Strength, Liquid 2701 50ml 234853 234853 11

Threadlocker, High Strength, Liquid 2701 250 ml 234855 234855 11

Threadlocker, Low Strength* 222 12 x 10 ml 267358 267358 10

Threadlocker, Low Strength* 222 50 ml 231501 231501 10

Threadlocker, Low Strength* 222 250 ml 267359 267359 10

Threadlocker, Medium Strength*, Liquid 243 12 x 10 ml 135279 135279 11

Threadlocker, Medium Strength*, Liquid 243 50 ml 135278 135278 11

Threadlocker, Medium Strength*, Liquid 243 250 ml 135357 135357 11

Threadlocker, Medium Strength*, Semi-Solid 248 9 g stick TBC TBC 11

Threadlocker, Medium Strength*, Semi-Solid 248 19 g stick TBC TBC 11

Threadlocker,Wicking 290 12 x 10 ml 267397 267397 10

Threadlocker,Wicking 290 50ml 233733 233733 10

Threadlocker,Wicking 290 250 ml 267398 267398 10

U-PVC Pipe Cleaner 7044 1 lt ** ** 41

UV Adhesive 302 250 ml 88468 88468 20

UV Adhesive 322 250 ml 88301 88301 21

UV Adhesive 350 50 ml 267423 267423 21

UV Adhesive 350 250 ml 195551 195551 21

UV Adhesive 352 250 ml 195552 195552 21

UV Wand System DC 97033 eq 236377 236377 46

UVALOC 1000 Cure Chamber 97035 eq 307079 307079 46

Varnish Spray Coating, Aerosol 7802 12 x 400 ml 142535 142535 33

Zinc Spray, Matt, Aerosol 7922 12 x 400 ml ** ** 33

Zinc Spray, Shiny 7800 12 x 400 ml 150740 150740 33

50

■ Look for Henkel Loctite Product name on these pages!


Product Name Pr.-No. Pack-Size Order-No. IDH-No. Page Product Name Pr.-No. Pack-Size Order-No. IDH-No. Page

Loctite Solution Guide

Documents

Transcript of Loctite Solution Guide