LOCKING SYSTEMS - AGA€¦ · Fully latched at 12 and at 6: S-35-3-C Fully latched at 9 and at 3:...
Transcript of LOCKING SYSTEMS - AGA€¦ · Fully latched at 12 and at 6: S-35-3-C Fully latched at 9 and at 3:...
Sectorial Catalogueenglish edition 47
industrial lock manufacturingindustrial lock manufacturing
Talleres AGA, S.A.C/ Notario Etxagibel, 620500 Mondragón - Gipuzkoa (Spain)Telf. 943 79 09 22 - Fax. 943 79 09 76
www.aga.es
LOCKING SYSTEMSlocks, hinges, handles and latches
Sect
ori
al
Cata
log
ue
LOC
KIN
G S
YS
TEM
S
2
AP-68
A-8
A-15
AP-15
A-10A-1
Bilbao
Vitoria
San SebastiánIrún
Mondragón
AP-1
COMPANYAga, specialised in industrial lock manufacturing.
AGASince 1962
For 40 years, our principal feature continues to be ourcapacity to give an ideal response in service,development and production to the different technicalproblems, which arise in the area of the manufactureof industrial equipment and devices in industry ingeneral.
Cradle of Spanish lock industry.
MONDRAGÓN
Birthplace of the Basque Country's lock industry in the19th century, this activity employed almost the entirepopulation of the town up to the middle of the 20thcentury. All these aspects promoted the professionaltraining of several generations in different fields of lockmanufacturing.
88 3
QUALITYWell made.
All our effort is focused on the integral satisfaction of the client. Our standard of quality guarantees that our dailylabour results in a well made product.
Certifications:
UNE-EN ISO 9001:2000
IQNet certification
Product certification UNE-EN 1300 CLASS A
Product certification UNE-EN 1300 CLASS B
INNOVATIONThink, design, produce...and if necessary, we invent for you.
Only the best for our clients.
TECHNOLOGY
Our 2 greatest assets: Top quality workmanship from well trained staff and cutting edge technology guaranteesoptimum results for our clients.
4
OTHER CATALOGUES OF THE COMPANY
TOTAL FLEXIBILITY
Catalogues:
AGA has focused its business on a multi sectorial market due to its high level of specialisation develop over theyears which has resulted in the production of a wide variety of products contained in our different sectorialcatalogues.
Although we offer a lot of products in our catalogues, in actual fact we do more special references or customisationthan standards. And, in addition…
We do not have a minimum order policy, which allows you to optimise much better your purchase.
We guarantee the replacement of any article, as well as its components for 10 years after the productis ex catalogued.
Customised solutions.
Service of “exclusive key” and “exclusive code” with which AGA guarantees that you have exclusiveaccess to the product.
General catalogue
All the AGA articles
2008 catalogue
High security locks
GENERAL ACCESSORIES
LOCKING SYSTEMS
HINGES
HANDLES
LATCHES AND LOCKS
KEYS
I ndex06 Keys
44 Swinghandles series 6010
50 Swinghandles series 6040
54 Swinghandles series 6050
58 Escutcheon series 6420 and 6430
59 Customised solutions
62 Handles and latches series 6600
65 Locking systems accessories
28 Handles
12 Cam locks
15 M-22 Quarter turn locks and latches
19 M-20 Quarter turn latches
22 Miscellaneous
34 Hinges
70 General accessories
26
20.5
22.5
17.2
20.5
500A 500B 500C 500D
900D900C900B900A
Ø 9.6
AGA-3T
6
26
20.5
22.5
17.2
20.5
500A 500B 500C 500D
900D900C900B900A
Ø 9.6
AGA-3T
6
27
Key
s
SERIES 500 Nickel-plated steel.
AGA-9I Nickel-plated steel.
FORTIS-2I Nickel-plated steel.
AGA-10 Nickel-plated steel.
AGA-3T Small. Nickel-plated steel.
SERIES 900 Nickel-plated steel.
AGA-12 Intended key. Nickel-plated brass.
Standard and Security Keys
88
7
6
8
10
8
8
37
14.5Ø
45
14.5Ø
42
14.5Ø
10
65
15.2Ø
8
39
16Ø
788
7
6
8
10
8
8
37
14.5Ø
45
14.5Ø
42
14.5Ø
10
65
15.2Ø
8
39
16Ø
7
Triangular Keys
Key
s
03016T Nickel-platedzamak. Latch: 193
03017T Nickel-platedzamak. Latch: 193
03018T Nickel-platedzamak. Latches: 193, 193A, 193M,194T, 403, 443, 493, 493R
030110T Nickel-platedzamak. Latches: 194T, 293, 593
03018TF Nickel-plated zamak.Latches: 193, 193A, 193M, 194T, 293F,393, 403, 443, 493, 493R
03028T Nickel-plated zamak.Latches: 193, 193A, 193M, 194T,403, 443, 493, 493R
030310T Nickel-plated zamak.Latches: 194T, 293, 593
050TF Grey polyamide.Latches: 193, 193A, 193M, 194T,293F, 393, 403, 443, 493, 493R
37
14.5
6
7
8
10
8
37
5
14.5Ø
8
10
2.4
45
14.5Ø
8
42
14.5Ø
8
Ø
8
Square KeysKey
s
03016CNickel-plated zamak.
03017CNickel-plated zamak.Latches: 192, 197
03018CNickel-plated zamak.Latches: 192, 197, 197M, 194C, 407, 447, 497,597
030110CNickel-plated zamak.Latch: 194C
03018CC Nickel-plated zamak.Latches: 392, 598
03018CM Nickel-plated zamak.Latches: 196, 196M, 446, 596
03028C Nickel-plated zamak.Latches: 192, 197, 197M, 194C, 407, 447, 497,597
6
8
37
5.5
14.5Ø
2.6
40
11Ø
7
8.6Ø
Ø 5.25
13.8Ø
6.5Ø 5.25
2.6
10Ø13.8Ø
Ø 5.52.5
7
13.5
9Ø
9
6
8
37
5.5
14.5Ø
2.6
40
11Ø
7
8.6Ø
Ø 5.25
13.8Ø
6.5Ø 5.25
2.6
10Ø13.8Ø
Ø 5.52.5
7
13.5
9Ø
9
Hexagon and Double Bit Keys
Key
s
8705 Black polyamide.Latch: 400
059DP Black polyamide.Latch: 400
0301DP Nickel-plated zamak.Latches: 194S, 290, 490
03018HMNickel-plated zamak.Latch: 189
03016HMNickel-plated zamak.Latches: 189, 198G
Latches and LocksCam locks
M-22 Quarter turn locks and latches
M-20 Quarter turn latches
Miscellaneous
20,5Ø
16,5
REF. 132REF. 132M
6
12
39
90º
REF. 132REF. 132M
6
12
39
90º
132 132M
REF. 132REF. 132M
6
9 3
12210
90º
15 20 25 30 35 40 45 50 55 60 65 70 75
63
41
Ø 5
S -10S -12
50.5
Ø 4
S -7
R 31
16
S -9
R 28
S -11
27
R 2.527
3
G
16
H
8
10
SH 35 G 3 5 10 15 20 25H 55 G 5 10 15 20 25 30
22Ø M-20
R
L
3
12
H
••
• •• •• ••
•••
•620 3.12080 40070 94• •• •
•
SH
Lock for metal and wood furniture with a range of door thickness between 5 to 50mm, with great versatility fordirection of turn, clockwise, counter clockwise, quarter turn or half turn, and for key removable positions, 1 or 2.Masterkey groups and same code locks groups options available.
Cut out dimension
Cam Locks
FEATURES
FINISH
AGA-9IFORTIS-2IBrassChromium platedPolishedL = 18,5 mmL = 25/30/35/40/45/50/55 mmR = 5 mmR = 13,5 mmR = 20/25/30/35/40/45/50 mmNº of combinationsNº of masterkey combinationsWeight (grs.)M20 nutM20 metallic washerLock washer
KEY MODEL
MATERIAL
ACCESORIES
CLOCKWISE 1/4 TURNKey removable at 12
COUNTER CLOCKWISE 1/4 TURNKey removable at 12
CLOCKWISE 1/4 TURNKey removable at 10 and at 2.
AGA supplies as standard both models with S40 cam, chromium plated and 2 keys.132 standard model: L=18,5mm, Clockwise 1/4 turn and key removable at 12.132M standard model: L=25mm, Clockwise 1/4 turn and key removable at 12.
Other Accesories: Key caseAccesories: page 69.
Retractable key caseAccesories: page 69.
0013 finger pullAccesories: page 69.
Anti turn plateAccesories: page 69.
STRAIGHT CAMS
CURVED CAMS
Order sample: Indicate latch position.Fully latched at 12 and at 6: S-35-3-CFully latched at 9 and at 3: S-35-5-A
Latc
hes
and
Lock
s
Order sample: S-20
88
15 20 25 30 35 40 45 50 55 60 65 70 75SH
20,5Ø
16,5
3
G
16
H
8
10
•••••
3.120400100•••
132R
REF. 132R
6
12
39
90º
REF. 132R
6
12
39
90º
REF. 132R
6
9 3
12210
90º
SH 35 G 3 5 10 15 20 25H 55 G 5 10 15 20 25 30
M-2022Ø
R
3
3010
H
63
41
Ø 5
S -10S -12
50.5
Ø 4
S -7
R 31
16
S -9
R 28
S -11
27
R 2.527
13
Lock for metal and wood furniture with a range of door thickness up to 19mm.This adjustable system allows youto adapt the grip point in 10mm.This lock has great versatility for direction of turn, clockwise, counter clockwise,quarter turn or half turn, and for key removable positions, 1 or 2. Masterkey groups and same code locks groupsoptions available.
Cut out dimension
Adjustable Cam Lock
FEATURES
FINISH
FORTIS-2IBrassChromium platedPolishedR = 19 mmNº of combinationsNº of masterkey combinationsWeight (grs.)M20 nutM20 metalic washerLockwasher
KEY MODEL
MATERIAL
ACCESORIES
Latc
hes
and
Lock
s
STRAIGHT CAMS
CURVED CAMS
Order sample: S-20
Order sample: Indicate latch position.Fully latched at 12 and at 6: S-35-3-CFully latched at 9 and at 3: S-35-5-A
Other Accesories:Key caseAccesories: page 69.
0013 finger pullAccesories: page 69.
Anti turn plateAccesories: page 69.
AGA supplies as standard the lock with S40 cam, chromium plated,Clockwise 1/4 turn, key removable at 12 and 2 keys.
Retractable key caseAccesories: page 69.
COUNTER CLOCKWISE 1/4 TURNKey removable at 12
CLOCKWISE 1/4 TURNKey removable at 12
CLOCKWISE 1/4 TURNKey removable at 10 and at 2.
ADJUSTABLE DIMENSIONS
20,5Ø
16,5
REF. 135REF. 135M
6
12
39
180º
REF. 135REF. 135M
6
12
39
90º
REF. 135
6
12
39
90º
REF. 135
6
12
9 3
90º
REF. 135
6
12
9 3
90º
• •• •• •• •• ••
•••
•208 20862 88• ••
•
135 135M
CH 35 G 3 5 10 15 20 25H 55 G 5 10 15 20 25 30
15 20 25 30 35 45 50 55 60 65 70 75CH
2G
7
H
16
63
41
Ø 5
C-10C-12
50.5
Ø4
C-7
R 31
16
C-9
R 28
C-11
27
27
C-40
40 R 2.5
23Ø M-20
L
R
6.5H
19.5
H
14
CURVED CAMS
STRAIGHT CAMS
Latc
hes
and
Lock
s
AGA supplies as standard the lock with C40 cam, chromium plated and with 2 keys.*The fixing clip is used for assembly locks with no thread housing.
Other Accesories:
FEATURES
FINISH
Series 500 or 900ZamakChromium platedBrass platedBlackL = 18,5mmL = 32mmR = 5mmR = 13,5mmR = 27mmNº of combinationsWeight (grs.)M20 nutFixing clip*Lockwaser
KEY MODEL
MATERIAL
ACCESORIES
Order sample: C-20
Order sample: C-35-5
CLOCKWISE HALF TURNKey removable at 12 and at 6
CLOCKWISE 1/4 TURNKey removable at 12
CLOCKWISE 1/4 TURNKey removable at 12 and at 3
COUNTER CLOCKWISE 1/4 TURNKey removable at 12
COUNTER CLOCKWISE 1/4 TURNKey removable at 12 and at 9
Lock for metal and wood furniture with a range of door thickness 5mm, 13mm or 27mm, with great versatilityfor direction of turn, clockwise, counter clockwise, quarter turn or half turn , and for key removable positions,1 or 2. Same code locks group option available.
ASSEMBLY WITH FIXING CLIP
Cam LocksCut out dimension
Key caseAccesories: page 69.
0013 finger pullAccesories: page 69.
Anti turn plateAccesories: page 69.
Retractable key caseAccesories: page 69.
1 a 2
88
47 52 57 62 47 47 47 47
- - - - 5 10 15 20
H
G
Z Z150 Z151 Z152 Z153 Z157 Z158 Z159 Z160
20.1
20.1
Ø 22.5
400 403 406 407 409 486 490 493 497• •
• •• •
•• •
• • • •• •
• • • • •
• • • •• • • •
• • • • •• • • •• • • •• • • •• • • •
46 46 46 46 46 76 78 74 76• • • • • • • • •
• • • •• • • • • • • • •• • • • • • • • •• • • • • • • • •
59DP* 3018T 3018C 3018H 301DP 3018T 3018C
19
H
G
8
4
Ø 28M22
R
L
4
D
15
H
CAMS
AGA supplies as standard L=18mm, R=6 or 8mm, with Z-150 cam and without key except in the model 400, which is suppliedwith 59DP or 8705 key model (page 9).
Further measurements upon request.
Other Accesories:Sealing coverAccesories: page 69.
Quarter turn latches for doors with a thickness between 6 and 57mm (see R). Designed for use in harsh climateconditions or when IP-rating is required.
KEY
KEY FORM
MATERIAL
FINISH (Zamak)
FEATURES
LOCKING DIRECTION
IP-RATING
ACCESORIES
Double bitTriangular 8 mmSquare 8 mmHexagon 8mmSlotZamakStainless steel AISI 316Black polyamide(fireproof)Chromium platedBlackL = 18 mm / R = 6 mmL = 18 mm / R = 8 mmL = 28 mm / R = 23 mmL = 36 mm / R = 31 mmL = 62 mm / R = 57 mmWeight (grs.)1/4 turn Left/RightIP66M22 nutM22 metallic washerM22 plastic washerOptional
Cut out dimension
M22 Quarter Turn Latches
Latc
hes
and
Lock
s
Locking direction
Left Right
408••
60••••
20.1
20.1
Ø22.5
493R••••
89••••
3018T
M22
Rmax = 7
4
H
3010
47 52 57 62 47 47 47 47
- - - - 5 10 15 20
H
G
Z Z150 Z151 Z152 Z153 Z157 Z158 Z159 Z160
63
41
Ø 5
S -10S -12
50.5
Ø 4
S -7
R 31
16
S -9
R 28
S -11
27
R 2.527
3
G
16
H
8
10
SH 35 G 3 5 10 15 20 25H 55 G 5 10 15 20 25 30
15 20 25 30 35 40 45 50 55 60 65 70 75SH
19
H
G
8
4
Ø 28
8
40
Ø28 10
M22
D
18
8
24
16
H
Quarter turn adjustable latch for door with athickness up to 7mm. Adjustable in 10mm toadapt the grip between frame and door.
Quarter turn wing knob latch for door with thicknessup to 8mm. Designed for use in harsh climateconditions.
M22 AdjustableQuarter Turn Latch
M22 Quarter TurnWing Knob Latch
Cut out dimension
Locking directionLocking direction
ACCESORIES
FEATURES
LOCKING DIRECTION
MATERIAL
FORM Wing knobBlack polyamideWeight (grs.)1/4 turn Right / LeftM22 nutM22 metallic washerM22 plastic washer
AGA supplies as standard the latch with Z-150 cam.
AGA supplies as standard the latch with S-50 cam andwithout key.
Other Accesories:
Triangular 8 mmBrassChromium platedR max. = 7 mmWeight (grs.)1/4 turn Right / LeftM22 nutM22 metallic washerM22 plastic washerOptionalKEY
ACCESORIES
LOCKING DIRECTION
FINISH
FEATURES
MATERIAL
KEY FORM
Sealing coverAccesories: page 69.
CAMS
CURVED CAMS
STRAIGHT CAMS
Order sample: S-20
Order sample: Indicate latch position.Fully latched at 12 and at 6: S-35-3-CFully latched at 9 and at 3: S-35-5-A
Latc
hes
and
Lock
s
Left RightLeft Right
ADJUSTABLE DIMENSIONS
345••••
20878••••
20.1
20.1
Ø22.5
638 631•
•• •• •
208166 142• •• •• •• •
47 52 57 62 47 47 47 47
- - - - 5 10 15 20
H
G
Z Z150 Z151 Z152 Z153 Z157 Z158 Z159 Z160
Ø28Ø22
28Ø 12
Rmax = 7
4
6.5
H
CH 35 G 3 5 10 15 20 25H 55 G 5 10 15 20 25 30
15 20 25 30 35 45 50 55 60 65 70 75CH
2G
7
H
16
63
41
Ø5
C-10C-12
50.5
Ø 4
C-7
R 31
16
C-9
R 28
C-11
27
27
C-40
40 R 2.5
19
H
G
8
4
M22
D
18
820.5
50
17
H
Latc
hes
and
Lock
s
Series 500 or 900ZamakChromium platedBlackNº of combinationsWeight (grs.)1/4 turn Right / LeftM22 nutM22 metallic washerM22 plastic washer
AGA supplies as standard the lock with C40 cam, chromiumplated and 2 keys.
Other Accesories:Sealing coverAccesories: page 69.
Non locking/with turnStandard keyZamakBlackNº of combinationsWeight (grs.)1/4 turn right1/4 turn leftM22 nutM22 plastic washer
AGA supplies as standard the latch with Z-150 cam and 2keys.
Indicate locking direction.
Locking directionLocking direction
Quarter turn cam lock for door with thickness up to7mm, locking direction, clockwise, counter clockwise,and key removable positions, opened and locked.Same code locks groups option available.
Quarter turn wing knob for door with thickness upto 8mm, locking direction, clockwise, counterclockwise, and key removable positions, openedand locked. Same code locks groups option available.
Cut out dimension
M22 Cam LockM22 Wing Knob
Left RightLeft Right
CAMS
CURVED CAMS
STRAIGHT CAMS
Order sample: C-20
Order sample: C-35-5
ACCESORIES
FEATURES
LOCKING DIRECTION
MATERIAL
FORM
FINISH
ACCESORIES
LOCKING DIRECTION
FINISH
FEATURES
MATERIAL
KEY MODEL
70 68 64 43 50 60 68 31
- 8 14 - - - - -
M M30 M40 M42 M43 M50 M60 M68 M31H
G
194T 194C 194S•
••
••••
• • •• • •• • •
134 135 137• • •• • •• • •• • •• • •
3018T 3018C 3018S
22.5Ø
26
Ø 4.5
20
20
3
3
Ø 5
16.5
G
H
3
3
20
20Ø 5
4
17
H
M22Ø 33
11.5
4.5
10
H
18
Quarter Turn Latches
Quarter turn latches for large doors and with several locking positions.
Double bit (Ø 3 mm)Triangular 8 mmTriangular 10 mmSquare 6 mmSquare 7 mmSquare 8 mmSquare 10 mmZamakBlackChromium platedWeight (grs.)1/4 turn Right1/4 turn LeftM22 nutM22 metallic washerM22 anti turn washerOptional
AGA supplies as standard the latch with M30 cam for triple locking points, chromium plated andwithout key. 10mm is the standard measurement for triangular and square key form latches.
Latc
hes
and
Lock
s CAMS
KEY
FEATURES
LOCKING DIRECTION
FINISH
KEY FORM
MATERIAL
ACCESORIES
Locking direction
Left Right
Cut out dimension
88
188 189 192 290 293 293F 392 393•
• ••
••
•••
•• • • • • • • •• • • • • • • •• • • • • • • •
• •• • • • •
• •97 66 52 62 52 52 90 86• • • • • • • •• • • • • • • •• • • • • • • •
3018HM 3018C 301DP 30110T 3018TF 3018CC 3018TF
19
20.5Ø
Ø 4.5
10.5
2
G
1610
7
H
CH 35 G 3 5 10 15 20 25H 55 G 5 10 15 20 25 30
15 20 25 30 35 40 45 50 60 65 70 75CH
63
41
Ø 5
C -10C -12
50.5
Ø4
C -7
R 31
16
C -9
R 28
C -11
27
C-55
R 2.555
27
M20 C
6H
Ø(Ref. 188)
27Ø
14
19
M20 Quarter Turn Latches
Quarter turn latches for door with thickness up to 6mm. Constant cam pressure against cabinet frameavoids unnecessary openings caused by vibrations. For general applications where no common keys werenecessary.
Double bitTriangular 8 mm free turnTriangular 10 mmSquare 8 mmSquare 8 free turnSquare 7 mmHexagon 8 mmHexagon 6 mmKnobZamakChromium platedC = 4mmC = 13,75 mmØ = 26 mmØ = 29,5 mmWeight (grs.)1/4 turn RightM20 nutM20 metallic washerOptional
AGA supplies as standard the latch with C55 cam, chromium plated and without key. 8mm is the standard measurement fortriangular, square and hexagon key form latches.
Latc
hes
and
Lock
s
Order sample: C-35-5 for latches
CURVED CAMS
STRAIGHT CAMS
KEY
KEY FORM
MATERIAL
FINISH
FEATURES
LOCKING DIRECTION
ACCESORIES
Locking direction
Right
Cut out dimension
Order sample: C-20 for latches
186 193 196 197 186M 193M 196M197M• ••
• •• •
•• •• • • • • • • •• • • • • • • •• • • •
• • • •62 60 61 60 78 73 74 74• • • • • • • •• • • • • • • •• • • • • • • •
• • • •3018T 3018CM 3018C 3018T 3018CM 3018C
63
41
Ø 5
C -10C -12
50.5
Ø4
C -7
R 31
16
C -9
R 28
C -11
27
C-55
R 2.555
27
2
G
1610
7
H
CH 35 G 3 5 10 15 20 25H 55 G 5 10 15 20 25 30
15 20 25 30 35 40 45 50 60 65 70 75CH
19
20.5Ø
Ø 4.5
10.5
M20Ø 26
L
4
R
H
20
CURVED CAMS
STRAIGHT CAMS
Order sample: C-20 for latches
Order sample: C-35-5 for latches
Latc
hes
and
Lock
s
AGA supplies as standard the latch with C55 cam, chromium plated and without key. 8mm is the standard measurement fortriangular and square key form latches.
Quarter turn latches for door with thickness up to 23mm. Constant cam pressure against cabinet frame avoidunnecessary openings caused by vibrations.
Cut out dimension
M20 Quarter Turn Latches
Locking direction
Right
Triangular 8 mmTriangular 7 mmSquare 8 mmSquare 8 mm FemaleSquare 7 mmSlotZamakChromium platedL= 21,5 mm / Rmax = 6 mmL=29 mm / Rmax = 23 mmWeight (grs.)1/4 turn RightM20 nutM20 metallic washerLock washerOptional
FINISH
ACCESORIES
KEY
LOCKING DIRECTION
KEY FORM
MATERIAL
FEATURES
88
• •• •• •• ••
•44 66• •• •
•
185 185M
16.5
20.5Ø
CH 35 G 3 5 10 15 20 25H 55 G 5 10 15 20 25 30
15 20 25 30 35 45 50 55 60 65 70 75CH
2G
7
H
16
63
41
Ø 5
C-10C-12
50.5
Ø 4
C-7
R 31
16
C-9
R 28
C-11
27
27
C-40
40 R 2.5
21
M20Ø 23
6.5
HRmax
L
CURVED CAMS
STRAIGHT CAMS
Order sample: C-20
Order sample: C-35-5
Latc
hes
and
Lock
s
AGA supplies as standard the latch with C40 cam, half turn and chromium plated.
Other Accesories:0013 finger pullAccesories: page 69.
ACCESORIES
LOCKING DIRECTION
FEATURES
FINISH
SlotZamakChromium platedBlackL = 18,5 mm / R max.=5 mmL = 32 mm / R max.= 28 mmWeight (grs.)1/2 turn Right / LeftM20 nutLockwasher
KEY FORM
MATERIAL
Basic latch to close small boxes, chests and light cabinets. The opening is performed by using a screwdriveror a coin.
Cut out dimension
M20 Miscellaneous
Locking direction
Left Right
• •• •• •••
••
•128 148• •• •• •• •
391 391M
16.5
20.5Ø
47 52 57 62 47 47 47 47
- - - - 5 10 15 20
H
G
Z Z150 Z151 Z152 Z153 Z157 Z158 Z159 Z160
19
H
G
8
4
M20
L
Ø 5
20
RD
26
47
H
22
M20 Quarter Turn for PadlockCut out dimension
Quarter turn latches for padlock. The diameter for padlock shackle may be 5mm. Used in cabinets where the userchanges, or to avoid access to unauthorised persons.
AGA supplies as standard the latch with Z-150 cam, chromium plated and in themodel 391, D = 14mm and R = 9mm.No padlock supplied.
Other Accesories:
Anti turn plateAccesories: page 69.
CAMS
Wing knob for padlockZamakChromium platedD = 14mm / R = 9mmD = 19mm / R = 14mmD = 27mm / R = 22mmL = 19,5mmL = 32mmWeight (grs.)1/4 turn RightM20 nutM20 metallic washerLockwasher
Latc
hes
and
Lock
s
ACCESORIES
LOCKING DIRECTION
FEATURES
FINISH
FORM
MATERIAL
Locking direction
Left Right
88
F
Ø M
2.5LA
Ø C
Ø C + 0,4mm
198 198G•
•• •• •• ••
••• ••
•••
••
••
•14 32•
•03016HM
23
Captive ScrewCut out dimension
Captive screw for cabinet doors and side panels. The screw is fixed in the door with a circlip.
F= Hexagon 5 mmF= Hexagon 6 mmCaptive screw in steelBrass bodyNickel-platedM6 screw (M)M8 screw (M)A = 20 mmA = 25 mmA = 40 mmA = 45 mmA = 55 mmØ 17 mmØ 22 mmL = 6,5 mmL = 9 mmØ C = 13 mmØ C = 18 mmWeight (grs.)Circlip 13 DIN-471 ECirclip 17 DIN-471 EOptional
Latc
hes
and
Lock
sBODY FIXINGCIRCLIP
CAPTIVESCREW
DOOR
FRAME THREADEDHOLE
LATCH BODY(fixed on door)
AGA supplies as standard A=25mm.
Further measurements upon request.
FINISH
ACCESORIES
FEATURES
MATERIAL
FORM
KEY
16.5
20.5Ø
••
••
•• • • • •• • • • •
44 46 54 50 50208• • • • •• • • • •• • • • •
Series 500 or 900 3018T 3018CM 3018C
300 443 445 446 447
24
M20
Ø22.85
12.2
18.25
15.25
4.5
920
30
15
8
1.5
4.54.5
7
RETÉN
AGA supplies as standard the latches without keys except model 300 which is supplied with 2 keys series 500 or 900.
Notes: for left and right door.
Other Accesories:Key caseAccesories: page 69.
0013 finger pullAccesories: page 69.
Retractable key caseAccesories: page 69.
Latc
hes
and
Lock
s
ACCESORIES
FINISH
Standard keySlotTriangular 8mmSquare 8mm. MaleSquare 8mm. FemaleZamakChromium platedWeight (grs.)Nº of CombinationsM20 nutM20 metallic washerStop plateOptional
KEY FORM
MATERIAL
KEY
FEATURES
Lock with pin push for door with thickness up to 9mm. The door is closed by pushing it, it is not necessary to usethe key.
Cut out dimension
M20 Pin Push Latches and Locks
RETÉN
STOP PLATE
88
593 596 597 598•
••
•• • • •• • • ••
••
•• •
• •122 118 110 184
•0303107 03018CM 03018C 3018CC*
314
8
15
47
47
10 3316.5
4.5
19 17
21
Ø 4
L
C
25
AGA supplies as standard the latches without keys except model 598 that is supplied with key 3018CC.
Latc
hes
and
Lock
s
Superimposing pin push latch that could be used for different door thickness. The door is closed by pushing it, itis not necessary to use the key.
KEY
ACCESORIES
FINISH
KEY FORM
MATERIAL
FEATURES
Triangular 10 mmSquare 8 mmSquare 8 mm. FemaleSquare 8 mm. Free turnZamakZinc platedL = 16 mmL = 11 mmL = 12 mmL = 20 mmC = 11 mmC = 1 mmWeight (grs.)EscutcheonOptional
Superimposing Pin Push Latch
HandlesHandles
H
105
M22
11 43
22.5Ø
26
Ø 4.5
••
••
••
•• • • • •• • • • •• • • • •
208 63.500246 296 304 308 298
••
• • •• • • • •• • • • •• • • • •
70 68 64 43 50 60 68 31
- 8 14 - - - - -
M M30 M40 M42 M43 M50 M60 M68 M31H
G
20
20
3
3
Ø 5
16.5
G
H
3
3
20
20Ø 5
4
17
H
679 678 671 672 676
28
L HandlesCut out dimension
L handle with cam for metal cabinets.
Locking direction
Left Right
AGA supplies as standard the handle with M30 cam except 679 model which is supplied without cam. No padlock supplied in 676handle model.
ACCESORIES
LOCKING DIRECTION
FEATURES
MATERIAL
Handle / without turnNon locking / with turnStandard keySecurity keyFor padlockSeries 500 or 900AGA-3TZamakBlackChromium platedNº of combinationsWeight (grs.)1/4 turn Right1/4 turn Left1/4 turn Right/LeftM22 nutM22 metallic washerM22 anti turn washer
TYPE
KEY
FINISH
CAMS Other Accesories:
Key caseAccesories: page 69.
Retractable key caseAccesories: page 69.
Han
dles
689 688 684 681 680 683 687•
••
••
•••
• • • • • • •• • • • • • •• • • • • • •
208246 248 240 240 235 235 235
• • • •••
• • • • • • •• • • • • • •• • • • • • •
301DP 3018T 3018C
H
105M22
11 43
22.5Ø
26
Ø 4.5
70 68 64 43 50 60 68 31
- 8 14 - - - - -
M M30 M40 M42 M43 M50 M60 M68 M31H
G
20
20
3
3
Ø 5
16.5
G
H
3
3
20
20Ø 5
4
17
H
29
Han
dles
CAMS
Key caseAccesories: page 69.
AGA supplies as standard the handle with M30 cam except 689 model which is supplied without cam. 681 handle model is suppliedwith 2 keys series 500 or 900. 8mm is the standard measurement for triangular and square key form types.
FINISH
ACCESORIES
KEY
LOCKING DIRECTION
TYPE
MATERIAL
Handle / without turnNon locking / with turnPush buttonStandard keyDouble bitTriangular 8 mmSquare 8 mmSquare 7 mmZamakBlackChromium platedNº of combinationsWeight (grs.)1/4 turn Right/Left1/4 turn Right1/4 turn LeftM22 nutM22 metallic washerM22 anti turn washerOptional
FEATURES
L simple handle with cam for metal cabinets.
Cut out dimension
L Simple Handles
Locking direction
Left Right
Other Accesories:
Retractable key caseAccesories: page 69.
M22
1138H
L
22.5Ø
26
Ø 4.5
70 68 64 43 50 60 68 31
- 8 14 - - - - -
M M30 M40 M42 M43 M50 M60 M68 M31H
G
20
20
3
3
Ø 5
16.5
G
H
3
3
20
20Ø 5
4
17
H
668 698 661 691 662 692 690 693 697• •
• •• •
••
••
• •• •
• • • • • • • • •• • • • • • • • •• • • • • • • • •
208 208 63.500 63.500• • •
• • • • • •246 228 252 232 256 236 214 214 214
• • • • • • •• • • • • • • • •• • • • • • • • •• • • • • • • • •
301DP 3018T 3018C
30
Left Right
Locking direction
T handle with cam for metal cabinets.
TYPE
Non locking / with turnStandard keySecurity keyDouble bitTriangular 8 mmSquare 8 mmSquare 7 mmAGA-3TSeries 500 or 900ZamakBlackChromium platedNº of combinationsL = 108 mmL = 80 mmWeight (grs.)1/4 turn Right / LeftM22 nutM22 metallic washerM22 anti turn washerOptional
T HandlesCut out dimension
AGA supplies as standard the handle with M30 cam. 661 and 691 handle models are supplied with 2 keys series 500 or 900. 8mmis the standard measurement for triangular and square key form types.
CAMS Other Accesories:
Key caseAccesories: page 69.
Retractable key caseAccesories: page 69.
KEY
MATERIAL
FINISH
FEATURES
KEY
LOCKING DIRECTION
ACCESORIES
Han
dles
22.5Ø
19.5
••
• •• •• •
208180 156• •• •• •• •
648 641
70 68 64 43 50 60 68 31
- 8 14 - - - - -
M M30 M40 M42 M43 M50 M60 M68 M31H
G
20
20
3
3
Ø 5
16.5
G
H
3
3
20
20Ø 5
4
17
H
55
M22
18 21H
31
Han
dles
CAMS Other Accesories:
Key caseAccesories: page 69.
Retractable key caseAccesories: page 69.
AGA supplies as standard the handle with M30 cam. 641 handle model is suppliedwith 2 keys series 500 or 900 (keys page 6).
ACCESORIES
LOCKING DIRECTION
FEATURES
FINISH
Non locking / with turnStandard keyZamakBlackChromium platedNº of combinationsWeight (grs.)1/4 turn Right1/4 turn LeftM22 nutM22 metallic washer
TYPE
MATERIAL
Wing Knob HandlesCut out dimension
Wing knob handle with cam for metal cabinets.
Left Right
Locking direction
Hinges
Hinges
9010
• •• •• •
48 94290º 290º
•• •
•
9000 9010
M6 20
8
20 3012
Ø 6
37
Ø6
2538
2010
4225
6Ø
34
9000
20.520.5
15.5
20.520.5
15.5
Hin
ges
AGA supplies hinges in packs of 6.
FINISH
ZamakStainless steel AISI 304 pinBlackWeight (grs.)Maximum opening1,5 mm door thickness2 mm door thickness3 mm door thickness
MATERIAL
FEATURES
Hinge for cabinet of 1,5mm, 2mm and 3mm door thickness.
PIN
CUT OUT DIMENSION (DOOR)
Maximum opening 290º
FRAME
DOOR
FRAME PIECEDOOR PIECE
PIN
FRAME PART
DOOR PART CUT OUT DIMENSION (DOOR)
Hinges for prominent door
42= =
12 9 12
7.5
10.6
R 5.3M-4
B
A
L
D C D M
= =
E
• •• •
• • •• • • •
• •15 13 1617 15 1813 16 1719 16 1910 8,5 1064 64 72M-5 M-5 M-674 102 106 34
180º 180º 180º 180º• • • •
• • •
970 974 975 9270
35
970-974-975
9270
Hin
ges
Screw on hinge for metal cabinet doors.
AGA supplies hinges in packs of 6.
Ref. 9270Male hinge piece fixed in frame
ACCESORIES
FINISH
BrassZamakStainless steel AISI 304 pinBlackChromium platedA mmB mmC mmD mmE mmL mmMWeight (grs.)Maximum openingStainless steel AISI 304 screwStainless steel earthwasher
MATERIAL
FEATURES
Hinges for prominent door
DOOR
FRAME
965••••
95150º
••••
I
63.5
66
22.5 28.5
22.5
4.25
28.4
14
M-6
I
8.7
12.7
28 19.116.6
8.4
8.7 5.1Ø
11.3
12.7
Ø5.1
9280••
20180º
36
Hinges for prominent door
AGA supplies hinges in packs of 6.Indicate turning direction.
Hin
ges
Screw on zamak hinge forswing door cabinet.
Screw on in line hinge for cabinet. Designed forfast door disassembly. Male hinge fixed in cabinetframe.
ACCESORIES
FINISH
FEATURES
MATERIALZamakStainless steel AISI 304 pinBlackChromim platedWeight (grs.)Maximum openingRight turning directionLeft turning directionStainless steel AISI 304 screwStainless steel earthwasher
Hinges for flush door
DOOR
FRAME
AGA supplies hinges in packs of 6.
DOORFRAME
ZamakBlackWeight (grs.)Maximum opening
MATERIAL
FINISH
FEATURES
9050
A B
AB
Ø D1Ø D2
E
90°
F
24
40 25
= = 12
M-5
9
5
A B
AB E
F
M
L
9050 9055 9060 911• • •
•• • • •• • •• •
••
3246 58 2292 110180 204180º 180º 180º 180º
9050 A B D1 D2 E F40x40 40 25 5,5 10,5 5 950x50 50 30 6,3 12,3 6 11,560x60 60 36 8,5 16,5 8 15
9060 A B E F L M40x40 40 25 5 9 12 M-550x50 50 30 6 11,5 12 M-660x60 60 36 8 15 14 M-8
R2
Ø6
1.5
2
40 24
4024
37
9055 9011
9060
Hinges for flush door
AGA supplies hinges in packs of 6.
ZamakStainless steel AISI 304Stainless steel AISI 304 pinBlackCounter shunk2 stainless steel AISI 304 threaded studs4 stainless steel AISI 304 threaded studsWeight 40x24 (grs.)Weight 40x40 (grs.)Weight 50x50 (grs.)Weight 60x60 (grs.)Maximum opening
Hin
ges
Screw on hinge for cabinet, with or without threaded studs.
FEATURES
MATERIAL
FINISH
Locking SystemsSwinghandles series 6010
Swinghandles series 6040
Swinghandles series 6050
Escutcheon series 6420 and 6430
Customised solutions
Handles and latches series 6600
Locking systems accessories
6310
6914
6919
6918
6519
6518
6517
6516
6710
6711
6712
6713
6714
6715
6717
6719
40
6710 6711 6712 6713 6714 6715 6717 6719
Lock
ing
Sys
tem
s
6010 SWINGHANDLE
Locking system series 6010
1.800 668 425
2.000 818 575
19
H
4 G
8
47 52 57 62 47 47 47 47
- - - - 5 10 15 20
H
G
Z Z150 Z151 Z152 Z153 Z157 Z158 Z159 Z160
8
1000
3
15
Ø 16.8
1000
721.5
11
D
93
D1
96
8
135°
20
D
93
D1
96
8
135°
11
20
6519 6518
HX
25
23
6310
259
63.5
195.5
25
43
22
H
X
25
28
41
Locking system series 6010
X: GripSee cams table
LOCKEDPOSITION
RODS 6516 AND 6517Cabinet height D D1
CAMS
Lock
ing
Sys
tem
s
Rods avaliable in aluminium or zinc plated steel
6517top rod
6516low rod
42
6311
68196818 6817
6909
6908
6710 6711 6712 6713 6714 6715 6717 6719
6710
6711
6712
6713
6714
6715
6717
6719
Lock
ing
Sys
tem
s 6011 SWINGHANDLE
Locking system series 6010
REF AT504G
36
4
50
4
19
1000
R8
Ø8
1000
Ø8
4
Ø4.75
1000
12.7
Ø8
7
11
6817 6818 6819
43
8
54
28
6311
16
23
26.7
H
Lock
ing
Sys
tem
s
Locking system series 6010
Maximum stroke= 18mm
Further cam dimensions upon request
50
50
50
25
7.5
Ø107.5
44
39
177
23
30
39
17747
23
30
19
REF. 6010
REF. 6011
Lock
ing
Sys
tem
s
Swinghandles and Lock kits series 6010
Choose finish
Cut out dimension
Polyamide swinghandle series 6010 for cabinet with thickness under 2,5mm.
6010 6011Rod latches and rod control •Round rods and cam •Locking kits for series 6010:
••
••
••
••
••
•• • • • • • •
•208 7645 11500
34 50 102 34 14 40 35 100301DP 3018T 3018C
6710 6711 6712 6713 6714 6715 6717 6719
45
TYPE
KEY MODEL
FINISH
FEATURES
KEY
Lock
ing
Sys
tem
s
Swinghandles and Lock kits serie 6010
Locking kits:
Double bitStandard keyMaster keyPush buttonSlotTriangular 8mmSquare 8mmSecurity master keySeries 500 or 900AGA-12 / SecurityStandard keyChromium platedNo finishNº of combinationsWeight (grs.)Optional
6711 model is supplied with 2 keys series 500 or 900 (keys page 6).6719 model is supplied with 2 keys AGA-12 (keys page 6).
Other accesories: Gasket for IP45
46
6320
6516
6517
6918
6518
6914
6519
6919
6740
6741
6742
6743
6745
67476749
6740 6741 6742 6743 6745 6747 6749
Lock
ing
Sys
tem
s
6040SWINGHANDLE
6042SWINGHANDLE
Locking system series 6040
X
25
H25
1.800 668 425
2.000 818 575
19
H
4 G
8
47 52 57 62 47 47 47 47
- - - - 5 10 15 20
H
G
Z Z150 Z151 Z152 Z153 Z157 Z158 Z159 Z160
8
1000
3
15
Ø 16.8
1000
721.5
11
D
93
D1
96
8
135°
20
D
93
D1
96
8
135°
11
20
6519 6518
47
66
54
123.5
223.5
22H
X
6340
Rods avaliable in aluminium or zinc plated steel
6517top rod
6516low rod
Lock
ing
Sys
tem
s
RODS 6516 AND 6517Cabinet height D D1
CAMS
X: GRIPSee cams table
Maximum strokes90º TURN= 16 mm125º TURN= 24 mm
Locking system series 6040
48
6740
6741
6742
6743
6745
67476749
6321
68196818
6817
6909
6908
6740 6741 6742 6743 6745 6747 6749
Lock
ing
Sys
tem
s 6041SWINGHANDLE
6043SWINGHANDLE
Locking system series 6040
CAM
1000
R8
Ø8
1000
Ø8
4
Ø4.75
1000
12.7
Ø8
7
11
REF AT504G
36
4
50
4
19
6817 6818 6819
16
6321
54
29
26.7
H25
49
Lock
ing
Sys
tem
s
Locking system series 6040
Maximum stroke = 18mm
Further cam dimensions upon request
50
50
50
25 38
170
25
50
12
14Ø
Ø10
38
170
25
21.5
19
47
REF. 6040
REF. 6041
21.5
Polyamide swinghandle series 6040 for cabinet with thickness between 1,5mm and 4,5mm. The modularity of thisseries gives you a wide range of solutions.
Lock
ing
Sys
tem
s
SERIES 60406040 6041 6042 6043
Rod latches and rod control •Round rods and cam •Rod latches, rod control and padlock •Round rods, cam and padlock •No padlock supplied.
Swinghandles and Lock kits series 6040
DETAILFOR PADLOCK
For 9mm shacklepadlock diameter
Cut out dimension
51
••
••
••
••
••
• • • • • • •208 7645 11500
34 50 102 34 40 35 100301DP 3018T 3018C
6740 6741 6742 6743 6745 6747 6749
Gasket for IP66(Optional)
Lock
ing
Sys
tem
s
6741 model is supplied with 2 keys series 500 or 900 (keys page 6).6749 model is supplied with 2 keys AGA-12 (keys page 6).
Other Accessories:
Swinghandles and Lock kits series 6040
Locking kits:
Double bitStandard keyMaster keySlotTriangular 8mmSquare 8mmSecurity masterkeySeries 500 or 900AGA-12 / SecurityStandard keyChromium platedNº of combinationsWeight (grs.)Optional
TYPE
KEY MODEL
FINISH
FEATURES
KEY
52
6819 68186817
6909
6908
6750
6752
6753
6755
6757
6750 6752 6753 6755 6757
Lock
ing
Sys
tem
s
Stainless steel locking system series 6050
6051 SWINGHANDLE
6053 SWINGHANDLE
53
1000
R8
Ø8
1000
Ø8
4
Ø4.75
1000
12.7
Ø8
7
11
REF AT504G
36
4
50
4
19
6817 6818 6819
26.7
24 H
Lock
ing
Sys
tem
s
Stainless steel locking system series 6050
Maximum stroke = 18mm
Further cam dimensions upon request
54
25
75
50
20.1
20.1
Ø22.5
24
25
160
35
Ø10
Swinghandles and lock kits series 6050Cut out dimension
DETAIL FOR PADLOCK
For 9mm shackle padlock diameter
Stainless steel AISI 303 swinghandle and polyamide cap series 6050.
6051 6053Round rods and cam •Round rods, cam and padlock •No padlock supplied. Locking kits for series 6050:
Lock
ing
Sys
tem
s
••
••
••
• • • • •7645
78 102 78 84 79301DP 3018T 3018C
6750 6752 6753 6755 6757
55
Swinghandles and lock kits series 6050
Lock
ing
Sys
tem
s
Double bitMaster keySlotTriangular 8mmSquare 8mmStandard keyChromium platedNº of combinationsWeight (grs.)Optional
Locking kits:
TYPE
KEY MODEL
FINISH
FEATURES
KEY
6329
6516
6914
6919
6918
6519
6518
6517
6420
6423
6420/6430 6423/6433
56
Lock
ing
Sys
tem
s
Locking system series 6420 and 6430
ESCUTCHEONS6420-6430
6329
X
22
54
123.5
123.5
H
X H
25
1.800 668 425
2.000 818 575
19
H
4 G
8
47 52 57 62 47 47 47 47
- - - - 5 10 15 20
H
G
Z Z150 Z151 Z152 Z153 Z157 Z158 Z159 Z160
8
1000
3
15
Ø 16.8
1000
721.5
11
D
93
D1
96
8
135°
20
D
93
D1
96
8
135°
11
20
Rods avaliable in aluminium or zinc plated steel.Top rod y low rod
6519 6518 6517top rod
6516low rod
57
Lock
ing
Sys
tem
s
Locking system series 6420 and 6430
X: GripSee cams table
Maximum strokes90º TURN = 16 mm125º TURN = 24 mm
RODS 6516 Y 6517Cabinet height D D1
CAMS
50
25
6420 6423
840
80
58
6430 6433
Other Accessories:
Gasket for IP66
Lock
ing
Sys
tem
s
Stucheons series 6420 and 6430Cut out dimension
Polyamide escutcheon with rod control series 6420 for cabinet with door thickness of more than 2,5 mm and 6430model for door thickness of less than 2,5 mm.
Double bit (Ø 5 mm) •Triangular (8 mm) •
Thickness ≥ 2,5 mm SERIES 6420
Double bit (Ø 5 mm) •Triangular (8 mm) •
Thickness ≤ 2,5 mm SERIES 6430
59
Lock
ing
Sys
tem
s
Customised solutions
Customised solutions avaliable
22.5Ø
26
Ø 4.5
60
6900
6360
68186819
Locking system series 6600Lo
ckin
g Sys
tem
s
Cut out dimension
6969. METALIC,WELD ONAPLICATION
L HANDLES(page 62)
66706671667366776678
LATCHES(page 64)
646064636467
T HANDLES(page 63)
66916698
6909. POLYAMIDE,SCREW ONAPLICATION
A1 B1 C16909-16909-26909-3
34 26 10
37 29 12
43 35 15
6900
6360
69696969
6909
6900
6360
DD
D
17
32 114
16
133
16
38
4
10
13
R 8
Ø 8
26
Ø 8
19 19
A1 B1 C16
6M2027.5
23
1
114
2
23
57.5
1.5
Ø 8.8
25
24.513.6
Ø 8L=1mL=1m
B1
61
38
14
17,5
Locking system series 6600
Lock
ing
Sys
tem
s
Triple point latches, with round rods and guides for cabinets, activated bylatch or handle.
6909. Screw on polyamide rod guide THREADED STUDWELD ON DOOR
6818. ROUND ROD WITH ROLL
6819. ROUND ROD
WELD ON APPLICATIONS
ASSEMBLYEXAMPLE6678 MODEL
Indicate locking direction
••
••
•• • • • •• • • • •• • • • •
208198 258 198 198 250• • • • •• • • • •• • • • •• • • • •
0301DP 03018T 03018C
6670 6671 6673 6677 6678
M22
105
43
9
30
8
22.5Ø
26
Ø 4.5
62
L Handles for series 6600Lo
ckin
g Sys
tem
s
6671 model is supplied with 2 keys series 500 or 900 (keys page 6).
Other Accesories:Key caseAccesories: page 69.
Retractable key caseAccesories: page 69.
Non locking/with turnStandard keyDouble bitTriangular 8mmSquare 8mmZamakBlackChromium platedNº of combinationsWeight (grs.)1/4 turn Right/LeftM22 nutM22 metallic washerM22 anti turn washerOptional
Cut out dimension
L handle to activate triple point latches.
LOCKING DIRECTION
TYPE
MATERIAL
FINISH
FEATURES
ACCESORIES
KEY
88
••• •• •• •
208185 180• •• •• •• •
6691 6698
M22
80
38
9
30
8
22.5Ø
26
Ø 4.5
63
T Handles for series 6600
Lock
ing
Sys
tem
s
6691 model is supplied with 2 keys series 500 or 900 (keys page 6).
Other Accesories:
Key caseAccesories: page 69.
Retractable key caseAccesories: page 69.
Non locking/with turnStandard keyZamakBlackChromium platedNº of combinationWeight (grs.)1/4 turn Right / LeftM22 nutM22 metallic washerM22 anti turn washer
Cut out dimension
T handle to activate triple point latches.
TYPE
MATERIAL
FINISH
FEATURES
LOCKING DIRECTION
ACCESORIES
••
•• • •• • •• • •
198 198 198• • •• • •• • •
301DP 3018T 3018C
6460 6463 6467
22.5Ø
26
Ø 4.5
M22Ø33
921.5
8
10
64
Lock
ing
Sys
tem
s
Double bit (de Ø 3mm)
Triangular 8mmSquare 8mmZamakBlackChromium platedWeight (grs.)M22 nutM22 metallic washerM22 anti turn washerOptional
Latches to activate triple point latches.
Latches for series 6600Cut out dimension
TYPE
MATERIAL
FINISH
FEATURES
ACCESORIES
KEY
65
12.5
3
5.510.5
1
55
1526.5
15
53
R 5
6
11
R 2
5.5
5.56
29Ø 18
Ø 13
8Ø
35.5
4
10.545
1
12.5
3
15
15
26.5
53
5.5 10
15
R 5 R 5
12.5
12.5
4.5
6
81
2
14
114
38
23
57.5
1.5
Ø 8.8
25
24.5
32
Padlock facilitiesStainless steel AISI 304.
DOOR
FRAME
FRAME DOOR
6900Metallic support to screw on 6630 round rod control model.Locking system series 6600. Weld on application.
69696818 and 6819 round rod guide.Locking system series 6600. Weld on application.
6908Round rod adapter.
Lock
ing
Sys
tem
s
Locking systems accesories
66
19 19
A1 B1 C16
6M2027.5
A1 B1 C16909-16909-26909-3
34 26 10
37 29 12
43 35 15
12
10
32
27.5
59.5
2134.5
15.1
1425
40Ø 4.5
4
1420.5
18
7.5
25
7.5
Locking systems accesories
69096817,6818 and 6819 polyamide round rod guide.Locking system series 6010, 6040, 6050 and 6600. Screw on application.
69146516, 6517 and 6519 rods polyamide shoe.Locking system series 6010, 6040, 6420 and 6430.
69186516 and 6517 rods catch.Locking system series 6010, 6040, 6420 and 6430.
Lock
ing
Sys
tem
s
5,5 x 19DIN 7982COUNTERSUNK
Ref. 6516 y 6517
67
39.5
25.5
22
16
45
19.528
15
3.5
8.75
2
8
26
13.522
11 11
10
15.4
10
10 3
301115.5
30
9.5
Ø 8
16
18
12.95
3.3
Locking systems accesories
69196516, 6517, 6518 and 6519 polyamide rod guide.Locking system series 6010, 6040, 6420 and 6430.
69296518 and 6519 polyamide rod guide for polyester cabinets.Locking system series 6040.
6950Sliding latch for cabinets with panel thickness between 0,8 and 2mm.Easy assembly without screws.
M-6 threadedstud weld on door
M-6x10 nutCounter sunk
Lock
ing
Sys
tem
s
0 to6mm
68
39.5
25.5
28
26
11
47
15
1.7
9
6
6
93
35
5.5
5.5 82 5.5
18.3
1.7
87.5
31
25 36
13.5
55
132
160
82xM-
2.5
Locking systems accesories
6951Sliding simple latch for cabinets with panel thickness up to 2mm.Easy assembly without screws.
6901Clipping cover pull for cabinets panel thickness up to 2mm.
6960Polyamide fixed handle. No screws supplied.
Lock
ing
Sys
tem
s
69
Nylon Ø 20
17 x 21 mm
16.5
20.5Ø
65
50
1.5
General accesories
Nylon washerFor M20 latches and locks.
4901Polyamide sealing cover for M22 latches andlocks.
Key casesFor key models SERIES 500, SERIES 900, AGA-9I and FORTIS-2I.
Anti turn plateFor M20 latches and locks.
Key and retractable caseFor key models SERIES 500, SERIES 900,AGA-9I and FORTIS-2I.
0013 Finger pullFor M20 locks.
Gen
eral
acc
esor
ies
Cut out dimension
70
A-1150 A-1280
A-1340A-1360 A-1130
A-1380 A-1450 A-1350
General accesories
M-20 Zamak M-20 Brass
M-20 Iron M-22 Iron M-22 Stainless steel
M-7, M-10, M-17, M-27 Iron
Assembly example
Gen
eral
acc
esor
ies
Nuts
Fixation clipsFor 135 lock model fast fixing.
…and also:• Internal engineering to develop what you require but you do not know how or where
obtain it.
• Technical staff who will solve all your doubts and advise you on the best choice.
• Adapt our standard products to the required specifications of the client.
• Total flexibility in the production of same code locks, groups, same code keys andmaster key systems.
More advantages …• Within 3 days of your request we will send you a sample for your approval.
• We do not have minimum order policy, which allows you to optimise much better yourpurchase.
• Customised solutions.
• We guarantee the replacement of any article, as well as its components for 10 yearsafter the product is ex catalogued.
• Service of “exclusive program” for keys and combinations codes.
WE DEVELOPAND PRODUCECUSTOMISEDPROJECTS
Spanish leader in industrial lock manufacturing
Sectorial Catalogueenglish edition 47
industrial lock manufacturingindustrial lock manufacturing
Talleres AGA, S.A.C/ Notario Etxagibel, 620500 Mondragón - Gipuzkoa (Spain)Telf. 943 79 09 22 - Fax. 943 79 09 76
www.aga.es
LOCKING SYSTEMSlocks, hinges, handles and latches
Sect
ori
al
Cata
log
ue
LOC
KIN
G S
YS
TEM
S