Locking Solutions:Security & Value for a Lifetime · nova serIes 5 & 55 MortIse locksets Our Nova...

Locking Solutions: Security & Value for a Lifetime

MULTIFUNCTION LOCKSETS

COMMERCIAL/ HIGH SECURITY

MULTI-DWELLING ACCESS

CONTROL

EXIT DEVICES & HARDWARE

HEALTHCARE/INSTITUTIONAL

CLASSROOM LOCKDOWN

www.marksusa.com • 800-645-9445 • Fax: 631-225-6136 • Lifetime Mechanical Warranty (Finishes excluded)

INTR

OD

UC

TIO

N &

TA

BLE

OF

CO

NTE

NTS

School and Classroom LocDown™ Locks . . . . . . . . . . . . . 26-27LA318GJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27ArchiTech™ Custom Wireless Access Control Platform . 28-31Standalone, Networked, Enterprise . . . . . . . . . . . . . . . . . . . . . . .28ArchiTech Networked Access with Keyfob Lockdown . . . . . . . .29Trilogy Networx Gen.2 Gateways & Expanders . . . . . . . . . . . . .30 Trim Options / How To Order . . . . . . . . . . . . . . . . . . . . . . . . . . .31www.designalock.com . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Exit Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-36Series M9900 Exit Device - Rim Mount . . . . . . . . . . . . . . . . . . .32 Series M9900 VR Exit Device . . . . . . . . . . . . . . . . . . . . . . . . . . .32Series M9900 Exterior Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Series M195 Exit Device Trim . . . . . . . . . . . . . . . . . . . . . . . . . . .34Series M8800 Narrow Stile Exit Device . . . . . . . . . . . . . . . . . . .34Electric Latch Retraction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Exit Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Electric Frame Actuator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Electric Dogging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Delayed Egress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

HI-SECURITY™ & Security-Mate™ Cylinders . . . . . . . . . . 37-45What Makes Marks HI-SECURITY™ Cylinders Unique? . . . . . .37Cylinder Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37Marks Security-Mate™ Cylinders . . . . . . . . . . . . . . . . . . . . . . . .38HI-SECURITY™ Key Control Management Package . . . . . . . . .39Service Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39Small Format Interchangeable Core (SFIC) . . . . . . . . . . . . . . . .40Sidebar & Security Finger Pins . . . . . . . . . . . . . . . . . . . . . . . . . .40Security Finger Pin Replacement Procedure . . . . . . . . . . . . . . .40Another Key Control Option . . . . . . . . . . . . . . . . . . . . . . . . . . . .41Operation & Hardware Installation . . . . . . . . . . . . . . . . . . . . . . .41Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41Key Blank Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Key Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Pin Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43Combinating & Capping Procedures . . . . . . . . . . . . . . . . . . . . . .44HI-SECURITY™ Cams & Tailpieces . . . . . . . . . . . . . . . . . . . . . .45HI-SECURITY™ Retro-Fit Key-In-Knob Tailpieces. . . . . . . . . . .45HI-SECURITY™ Retro-Fit Key-In-Knob Tailpieces (cont’d.) . . .45

Marks USA Warranties Terms & Conditions . . . . . . . . . . . . .46

IntroductIonMarks USA Architectural Guide was created to give a more in-depth description about products suitable for installation in School Systems, Housing Authorities, Hospitals, Commercial Buildings, etc. Contained within this guide is information about our Nova and Protector Series Mortise Locksets, Commercial Grade Mortise Locksets and Deadlocks, Survivor Series Cylindrical Leversets, Defender Series Deadbolts & Deadlatches, our Custom Lockset Division, LifeSaver® Behavioral Health and Institutional Life Safety Locksets, Hospital Push/Pull Paddlesets, the i-Qwik Electronic Access Control Series, LocDown® School Lockdown Locks, ArchiTech® Designer Wireless Access Series, Exit Devices, and HI-SECURITY™ Cylinders. The guide assists the institutional user by informing the reader of lockset features which will satisfy the requirements of institutional facilities for both design and maintenance.

table of contents

Mortise Locksets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7NOVA Series 5 & 55 Grade 1 Mortise Locksets . . . . . . . . . . . . . . . . . . . . . . . . . .1Protector Series BE101 & LA118 Grade 1 Mortise Locksets . . . . . . . . . . . . . . . .2Series 7 & 9 Commercial Grade Mortise Locksets; Series 31, 2 & 3 Mortise Deadlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Mortise & Tubular Lock Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5Mortise Lockset Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

Cylindrical Locksets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13Survivor Series Grades 1 & 2 Cylindrical Leversets . . . . . . . . . . . . . . . . . . . . . . .8Clutch System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Super Strength Retractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Long Life Lever Support Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Strength & Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Quick Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Easy Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Uses Most Available Cylinders (Tailpieces: Standard & IC Core) . . . . . . . . . . .10Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10ADA • Grades 1 & 2 • Made in U.S.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Survivor Series Grade 1 REX & Electrified Leversets . . . . . . . . . . . . . . . . . . . .11175 Grade 2 Economy Series Cylindrical Leversets . . . . . . . . . . . . . . . . . . . . .12Cylindrical Knob/Lever Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Tubular Deadbolts & Cylindrical Cartridge Deadlatches . . . . . . . . . . . . 14-15Defender Series Tubular Deadbolts & Cylindrical Cartridge Deadlatches . . . . .14Unique Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Protective Steel Shutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Simple Fast Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15One Cylinder Fits All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Easy Retrofit Deadbolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Custom Lockset Division . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16About Marks USA Custom Lockset Division . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

LifeSaver™ Institutional Life Safety Locksets . . . . . . . . . . . . . . . . . . . . . . 17-20195BH D-Lig Slide Behavioral Health Cylindrical Locksets, Grade 1 . . . . . . . . .175BH D-Lig Slide Behavioral Health Mortise Locksets, Grade 1 . . . . . . . . . . . . .18SS55 Series Institutional Life Safety Grade 1 Mortise Locksets - Knobs . . . . . .19SS19 Series Institutional Life Safety Grade 1 Mortise Locksets - Levers . . . . .20SS19 Series Institutional Life Safety Grade 1 Cylindrical Locksets - Levers . . .21SS55 Series Institutional Life Safety Grade 1 Cylindrical Locksets - Knobs and Mortise Deadlocks . . . . . . . . . . . . . . . . . . . . .22

Hospital Locksets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23PD Series Grade 1 Mortise & Cylindrical Push/Pull Paddlesets . . . . . . . . . . . . .23

Electronic Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-25i-Qwik LITE Series Electronic Access Control . . . . . . . . . . . . . . . . . . . . . . . . . .24i-Qwik Series Rim Exit Device Stand Alone Access Control, Adapter Plates . . .25

*


NO

VA SER

IES GR

AD

E 1 MO

RTISE LO

CK

SETS

1

standard features MARKS #5 & 55 FUNCTION ANSI # FINISH GROUPS

KEYED SINGLE CYLINDER, NO DEADBOLT

3, 10, 10B,32, 32D

D OFFICE / VESTIBULEDW VESTIBULEE OFFICE F04 EW STOREROOM F07 J CLASSROOM F05 JM, JR HOSPITAL (HOLDBACK) F06GL INST. PRIVACY F26 EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED KEYED SINGLE CYLINDER, WITH DEADBOLTA ENTRANCE F08, F10B ENTRANCE F21F DORMITORY F12FS DORMITORY FW DORMITORY F13FD APARTMENT F20H HOTEL F15LH SPEC. PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLTG ENTRANCE F09GC INTRUDER LATCHBOLT F32GG CLASSROOM SECURITY GR CLASSROOM SECURITY w/HOLDBACK WW INSTITUTION F30KEYED DOUBLE CYLINDER, WITH DEADBOLTAC ENTRANCE F35C STOREROOM F14 FC INTRUDER DEADBOLT F34FA DORMITORY F11 FX DORMITORY F33 KEYLESSN PASSAGE F01 L BATHROOM F02 LF PRIVACY F19 LJ PRIVACY F22EX EXIT F31

5 Series Mortise Lockset Shown 55 Series Mortise Lockset Shown

5 Series (2-3/4” backset); 55 Series (2-1/2” backset)1. Lock Front: Adjustable bevel steel backplate 1-1/4” x 8” x 7/64” thick stainless steel. Cover plate 1/16” thick.2. Deadbolt: Stainless steel with hardened roll pins, 1” throw.3. Latch: Solid stainless steel with antifriction latch lever, 3/4” throw (reversible).4. Auxiliary Deadlatch: 1/2” throw (reversible).5. Hubs: Steel, 9/32’’ on diamond, 5/16” on square with security separator. Independent exterior and interior lever support springs.6. Lever Support Springs: Lever support springs with 5/16” Hubs7. Hub Follower: (to lock hub) steel 1/8” thick.8. Hub Stop: (to limit lever travel) steel 1/8” thick. 9. Case: Stamped steel 3/32” thick, zinc dichromate finish.

Standard & HI-SECURITY™ IC Core Models:Interchangeable Core models for 6 or 7 pin cores (not included).Accepts: Marks, Marks HI-SECURITY™, Medeco®, KeyMark™, Falcon,Schlage® small format & Best®. IC Core Tailpieces ARE Included.

k

Electrified Models Available

nova serIes 5 & 55 MortIse locksetsOur Nova Series Mortise Locksets represent years of development into world class BHMA Certified mortise locksets and carry the Marks Lifetime Mechanical Warranty. The Nova Series is available with a variety of different knobs, levers, roses and plates as well as custom capabilities with 32 functions in popular finishes. Whether your application is a single style single function lockset or an entire complex with multiples and varieties, the Nova Series has the form, fit and competitive price to complete your project.

• Nova Series Grade 1 Mortise Locksets are Certified• Thru-bolted trim for proper alignment and ease of installation• Self adjusting spindles • Independent lever support springs• Lifetime Mechanical Warranty

AUTO-REVERSING MORTISE LOCKSET NOW AVAILABLE!

Electrified Models Excluded

5RR57/26D

5DR96/32D 5RW96EL/32Dpatent pending

NOVA SERIES 5 & 55MORtISE LOckSEtS ANSI 156.13 GRAdE 1

EASILY REVERSIBLE WITHOUT REMOVING THE

COVER OR INTERNAL PARTS


PRO

TEC

TOR

SER

IES

MO

RTI

SE L

OC

KSE

TS

2


PROtEctOR SERIESMAxIMuM SEcuRIty MORtISE LOckSEtS ANSI 156.13 GRAdE 1

MARKS #BE101 & LA118 FUNCTION ANSI # FINISH

GROUPSv


3, 10,10B, 32D

D OFFICE VESTIBULE DW VESTIBULEE OFFICE F04 EW STOREROOM F07 GL INST. PRIVACY F26 J CLASSROOM F05 JM, JR HOSPITAL (HOLDBACK) F06 EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED KEYED SINGLE CYLINDER, WITH DEADBOLTA ENTRANCE F08, F10B ENTRANCE F21F DORMITORY F12 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 LH SPEC. PRIVACY

MARKS #BE101 & LA118 FUNCTION ANSI # FINISH

GROUPSv

KEYED DOUBLE CYLINDER, NO DEADBOLT

3, 10,10B, 32D

G ENTRANCE F09GC INTRUDER LATCHBOLT F32 WW INSTITUTION F30KEYED DOUBLE CYLINDER, WITH DEADBOLTAC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 FA DORMITORY F11 FX DORMITORY F33 KEYLESSN PASSAGE F01L BATHROOM F02LF PRIVACY F19 LJ PRIVACY F22 EX EXIT F31 DUMMY TRIMDI, DO DUMMY TRIM INSIDE/OUTSIDE DT DUMMY TRIM

Protector serIesAll Marks USA Protector Series mortise locksets feature an “Override Guard” which is designed to result in spindle failure when torque of over 550 foot lbs. is applied. The lockset remains locked and when spindle is replaced, the lockset is fully operational. Protector Serieslocksets have a lifetime mechanical warranty, meet or exceed all operational and security tests of ANSI A156.13-2002 for Series 1000, Grade 1. Protector Series Locksets are UL listed, 3-hour fire rated and meet ADA requirements.

Performance Specifications: Life Test: 1,500,000 cycles minimum.Exterior and Interior Trim Specifications:Brushed stainless steel plate assemblies with machined lever bearings.Screwless stainless steel levers assembled to plate with hardened snap rings.(Levers cannot be removed without disassembling trim plates from inside.)Additional trim designs are available with override guard lock protection,Consult factory. Exterior: 4 welded thru-posts. Center posts pass through lock body, automatically aligning trim 8-1/2” x 2-3/4” x 1/8” thick Interior: 4 stainless steel, tamper-proof mounting bolts connecting inside plate, 8-1/2” x 2-3/4” x 1/8” thick Cylinder: 1-1/8” long solid brass, 6 pin with 2 keys Strike: 4-7/8” x 1-1/4” x 3/32” thick, 5/8” curved lip Conforms to ANSI spec., A115.1 Door Thickness: 1-3/4” standard. Extended range availableScrewless Lever Choices: American, Crescent, Plaza & Titan

Lock Specifications: 5 Series (2-3/4” Backset)NOVA SERIES GRADE 1 MORTISE LOCKSETS ARE BHMA CERTIFIED Lock Front: Adjustable bevel steel backplate 1-1/4” x 8” x 7/64” thick; Cover plate 1/16” thick with tamper-proof screws Deadbolt: Stainless steel with hardened roll pins, 1” throw Latch: Solid stainless steel with antifriction latch lever, 3/4” throw (reversible) Aux. Deadlatch: 1/2” throw (reversible) Case: Stamped steel 1/16” thick Hubs: Steel, 5/16” on square w/security separator, 9/32” on diamond; Independent exterior and interior lever support springs Hub Lock Arm: Steel 1/8” thick (to lock hub)Exterior Lever Override Guard Integral cam spindle/spring assembly engages hub lock arm, case hardened steel, 1/8” thick. Interior Lever Override Guard Integral cam spindle/spring assembly prevents interior lever override, case hardened steel, 1/8” thick

standard features

Standard & HI-SECURITY™ IC Core Models: Interchangeable Core modelsfor 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco®,KeyMark™, Falcon, Schlage® small format & Best®. IC Core Tailpieces ARE Included.

k

vAdditional Finishes, Consult Factory .

BE101A/32D Mortise Locksetwith Titan Lever Shown

LA118A/32D Mortise Locksetwith American Lever Shown


CO

MM

ERC

IAL G

RA

DE M

OR

TISE LOC

KSETS &

DEA

DLO

CK

S

3

cOMMERcIAL GRAdESERIES 7 & 9 MORtISE LOckSEtS & SERIES 31, 2 & 3 MORtISE dEAdLOckS

standard features

MARKS # 7 & 9 FUNCTION ANSI # FINISH GROUPSKEYED SINGLE CYLINDER, NO DEADBOLT

3, 10, 10B,32, 32D

D OFFICE / VESTIBULEDW VESTIBULEKEYED SINGLE CYLINDER, WITH DEADBOLTA ENTRANCE F08, F10B ENTRANCE F21F DORMITORY F12FS DORMITORY FW DORMITORY F13KEYED DOUBLE CYLINDER, WITH DEADBOLTAC ENTRANCE F35C STOREROOM F14 FA DORMITORY F11 FX DORMITORY F33 KEYLESSN PASSAGE F01 L BATHROOM F02 LF PRIVACY F19

standard features Series 2 & 3: Backset: Series 2: 2-1/2”; Series 3: 2-3/4” Bolt throw: 1” Case: High pressure cast Front: 1-1/16” x 4-5/8” flat or 3° bevel Cylinder: Solid brass cylinder, 6-pin, “C” keyway, 2 keys Strike: #4035 Included

Series 7: Backset: 2-3/4” Bolt throw: Cast alloy full 1” throw Latch throw: 5/8” (anti-friction) Case: High pressure cast Zamac, baked enamel finish Front: 1-1/4” x 8”, Flat or 3° bevel Hubs: 9/32” on square steel with security separator

Series 9: Backset: 2-1/2” Bolt throw: Cast alloy full 1” throw Latch throw: Solid brass 1/2” throw, reversible Case: High pressure cast Zamac, baked enamel finish Front: 1-1/16” x 7-5/8”, Flat or 3° bevel Hubs: 9/32” on square steel with security separator

MortIse deadlocks serIes 31, 2 & 3

3"3

Series 31 BHMA Certified: Backset: 2-3/4” Bolt throw: 1” stainless steel with hardened roll pins Case: Stamped Steel Front: 1-1/16” x 4-5/8” adjustable bevel Cylinder: Solid brass cylinder, 6-pin, “C” keyway, 2 keys Strike: #4035 Included

Series 31Mortise Deadlock




k

coMMercIal Grade MortIse locksets serIes 7 & 9Marks 7 & 9 Series Mortise Locksets feature a high pressure cast Zamac body with a baked enamel finish to resist corrosion, cast alloy 1” throw deadbolt for strength, and a flexible face plate that may be installed flat or with a 3 degree bevel. The 7 & 9 Series are available with a variety of different knobs, levers, roses and plates making these efficient mortise locksets a great choice forcommercial applications when grade 1 fire rated locksets are not required.


k

MARKS #31, 2 & 3 FUNCTION ANSI # FINISH

GROUPS— LOCK ONLY —

3, 3E, 10,10B, 26, 26D,

32, 32D

K CYLINDER x TURNPIECE E06072L COMMUNICATING SINGLE CYL. E06082M DOUBLE CYLINDER E06062S CLASSROOM (Specify Handing) E06092X TURNPIECE ONLY

7NY10/3 Mortise Lockset withNew Yorker Plate &Round Knob Shown

9NY10/26 Mortise Lockset withNew Yorker Plate &Round Knob Shown


MO

RTI

SE &

TU

BU

LAR

LO

CK

TR

IM

4

ROuNd 10 2-1/2"

2-1/4"

7/16"

2-9/16"

BALL 20/30

7/16"

2-9/16" 2-3/16"

3"

2-1/2"

7/16"

2-9/16"

2-3/4"EcLIPSE 60

ROSE Rx

2-9/16”

7/16”

ROSE RW

2-9/16”

7/16”

ROSE RR

2-9/16”

7/16”

ROSE RS

2-1/4”

7/16”

ROSE RQ

2-1/4”

7/16”

MORtISE & tuBuLAR LOck tRIMNOtE: ROSES ALSO AVAILABLE IN 2-1/4” dIAMEtER

trIMMarks USA offers a great many designs of knobs, levers, turnpieces and pull handles in both brass and stainless steel. Locksets using these designs need minimum orders and may require longer delivery time since they are not normally stocked. At this time, there are more than 300+ designs available and more are being added constantly. We also offer designs made to customers individual specifications.


MO

RTISE &

TUB

ULA

R LO

CK

TRIM

5

4-1/2"7/16"

2-9/16"

2-7/8"

4-1/4"7/16"

2-9/16"

2-5/8"

4-1/4"7/16"

2-9/16"

2"

1/2"

7/16"

2-9/16"

3"

4-1/2"

4-1/2"7/16"

2-9/16"

2-3/4"

1/2"

4-1/2"7/16"

2-9/16"

3-1/8"

4"

2-1/2"

7/16"

2-1/4"

2"

4-1/2"7/16"

2-9/16"

2-3/4"

2-5/16"

5348

5"

SF0312-1/2"

5-1/16"

SF095 2-11/16"

6"

2-7/8"

SF117

5-1/8"

SF037A2-13/16"

5-5/16"

56713-15/16"

4-3/16"

MAXWELL 77 STANHOPE 5644

TOWNE 72

AMERICAN 92

PLAZA 82

DAYTON 83

CRESCENT 86

OMNI 78

TITAN 96

trIMMarks USA offers a great many designs of knobs, levers, turnpieces and pull handles in both brass and stainless steel. Locksets using these designs need minimum orders and may require longer delivery time since they are not normally stocked. At this time, there are more than 300+ designs available and more are being added constantly. We also offer designs made to customers individual specifications.

MORtISE & tuBuLAR LOck tRIMNOtE: ROSES ALSO AVAILABLE IN 2-1/4” dIAMEtER


MO

RTI

SE L

OC

KSE

T FU

NC

TIO

NS

6

MORtISE LOckSEt FuNctIONSANSI 156.13 GRAdE 1

MortIse lockset functIonsSINGLE CYLINDER FUNCTIONSANSI # Cam Strike Marks Function

F04: OFFICELatch by knob/lever either side except when outside knob/lever locked by stop-button in front; then by keyoutside. Auxiliary latch deadlocks latch. Inside always open.

I/S O/S

E

F05: CLASSROOMLatch by knob/lever either side except when outside knob/lever locked by key. When locked, latch boltretracted by key. Inside always open. Auxiliary latch deadlocks latch.

J

F06: HOLDBACK “A”Latch by knob/lever either side except when outside knob/lever locked or unlocked by key. Auxiliary latch deadlocks latch. Inside always open. Inside knob/lever unlocks outside lever. Latch bolt can be locked in retracted position by locking inside hub. Can be used with blank outside trim.

JM

F06: HOLDBACK “B”Latch by knob/lever either side except when outside knob/lever locked or unlocked by key. Auxiliary latch deadlocks latch. Inside always open. Inside knob/lever will not unlock outside knob/lever. Latch bolt can be locked in retracted position by locking outside hub. Can not be used with blank outside trim.

JR

F07: STOREROOMLatch by knob/lever inside, key outside. Outside knob/lever always rigid. Auxiliary latch deadlocks latch. Inside always open.

EW

F08, F10: ENTRANCE Latch by knob/lever either side except when outside locked by stop-button; then by key outside, knob/lever inside. Deadbolt by key outside, turnpiece inside. Deadbolt deadlocks latch.

A

F12: DORMITORYLatch by knob/lever either side except when outsideknob/lever locked by stop-button or projected deadbolt. Deadbolt by turnpiece inside. Inside knob/lever retracts latch and deadbolt simultaneously, leaving outside locked. Deadbolt deadlocks latch.

F

F13: DORMITORYLatch by knob/lever either side except when projected deadbolt locks outside knob/lever and deadlocks latch. Deadbolt and latch by key outside. Deadbolt by turnpiece inside. Inside knob/lever retracts latch and deadbolt simultaneously, automatically unlocking outside knob/lever.

FW

F15: HOTELInside knob/lever always free, outside rigid. Latch by knob/lever inside, key outside. (When deadbolt projected by turnpiece all keys are shut out except emergency key). Inside knob/lever retracts deadbolt and latch simultaneously. Auxiliary latch or deadbolt deadlocks latch. Indicator available.

H

SINGLE CYLINDER FUNCTIONSANSI # Cam Strike Marks Function

F20: APARTMENTLatch by knob/lever either side except when outside locked by stop-button or projected deadbolt. Latchdeadlocked by auxiliary latch or deadbolt. Deadbolt and latch by key outside. Deadbolt by turnpiece inside. Inside knob/lever retracts latch & deadboltsimultaneously, leaving outside locked.

I/S O/S

FD

F21: ENTRANCELatch by knob/lever either side. Deadbolt by key outside, turnpiece inside. Deadbolt deadlocks latch.

B

F26: INSTITUTIONAL PRIVACYLatch by knob/lever either side except when outsideknob/lever locked by inside thumbturn. Latch deadlocked by auxiliary latch. Key outside opens latch. When outside locked, inside knob/lever retracts latch, automatically unlocking outside knob/lever.

GL

OFFICE VESTIBULE:Latch by knob/lever either side except when outsideknob/lever locked by stop-button in front; then by key outside.

D

VESTIBULE:Latch by knob/lever inside, key outside.Outside knob/lever always rigid.

DW

DORMITORY:Latch by knob/lever inside. Outside knob/lever always rigid. Deadbolt and latch by key outside. Deadbolt by turnpiece inside. When deadbolt is projected, latch is deadlocked. Inside knob/lever retracts latch and deadbolt simultaneously.

FS

SPECIAL PRIVACY:Inside knob/lever always free, outside rigid. Latch byknob/lever inside, key outside. Deadbolt by turnpiece inside, emergency release outside. Inside knob/lever retracts deadbolt and latch simultaneously. Auxiliarylatch deadlocks latch.

LH

STOREROOM:Latch by thumbpiece inside. Key outside. DN

STOREROOM:Latch by thumbpiece or knob/lever inside. Key outside. Auxiliary latch deadlocks latch.

EN

ELECTRIFIED FUNCTIONS

ELECTRICALLY LOCKED (Fail Safe):Outside always locked electrically. Open by key outside, switch or loss of power. Auxiliary latch deadlocks latch. Inside always open.

EL

ELECTRICALLY UNLOCKED (Fail Secure):Outside always locked until unlocked by key orelectrically energized. Auxiliary latch deadlocks latch. Inside always open.

EU

2101

2105

2105

2105

2101

2102

2102

2102

2102

2102

2102

2101

2101

2101

2102

2102

2101

2101

2101

2101

2105

I/S


MO

RTISE LO

CK

SET FUN

CTIO

NS

7

MORtISE LOckSEt FuNctIONSANSI 156.13 GRAdE 1

MortIse lockset functIonsDOUBLE CYLINDER FUNCTIONSANSI # Cam Strike Marks FunctionF09: ENTRANCELatch by knob/lever either side except when outside knob/lever locked by key inside, latch retracted by key outside. Outside remains locked. Auxiliary latch deadlocks latch.

I/S O/S

G

F11: DORMITORYLatch by knob/lever either side except when outside knob/lever locked by stop-button or projected dead-bolt. Deadbolt by key either side. Inside knob/lever retracts latch and deadbolt simultaneously leaving outside locked. Deadbolt deadlocks latch.

FA

F14: STOREROOMLatch by knob/lever either side. Deadbolt by keyeither side. Deadbolt deadlocks latch.

C

F24: APARTMENT HANDLELatch by thumbpiece either side except when outside is locked by key inside. When outside is locked, latchretracted by key outside or thumbpiece inside. Auxiliary latch deadlocks latch.

G

F25: STOREROOM “B” BodyLatch by thumbpiece either side. Deadbolt by key either side.

C

F25: STOREROOMLatch by thumbpiece either side except when outside thumbpiece locked by stop-button in front; then by keyoutside. Deadbolt by key both sides. Deadbolt dead-locks latch.

SO

F30: INSTITUTIONBoth knob/levers rigid. Auxiliary latch deadlocks latch.Latch by key either side.

WW

F32: INTRUDER LATCH BOLTLatch by knob/lever either side except when outsideknob/lever is locked from inside or outside by key. Latch operated by key from inside or outside. Auxiliary latch, deadlocks latch. Inside always open.

GC

CLASSROOM SECURITYLatch bolt retracted by knob/lever from either side unless outside is locked by key from either side. Auxiliary latch deadlocks latch bolt when door is locked. Inside knob/lever is always free for immediate egress.

GG

CLASSROOM SECURITY w/HOLDBACKLatch bolt retracted by knob/lever from either side unless outside is locked by key from either side. When locked, latch bolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latch bolt when door is locked. Depress inside knob/lever and turn key 360° for holdback feature. Inside knob/lever always free for immediate egress.

GR

F33: DORMITORYLatch by knob/lever either side except when projected deadbolt locks outside knob/lever and deadlocks latch. Deadbolt and latch by key either side. Inside knob/lever retracts latch and deadbolt simultaneously, auto-matically unlocking outside knob/lever.

FX

F33: DORMITORYLatch by knob/lever either side except when projected deadbolt locks outside knob/lever and deadlocks latch. Deadbolt and latch by key either side. Inside knob/lever retracts latch and deadbolt simultaneously, auto-matically unlocking outside knob/lever.

FC

F35: STORE DOORLatch by knob/lever either side except when outside knob/lever locked by stop-button in front; then by key outside. Deadbolt by key either side. Deadbolt deadlocks latch.

AC

NON-KEYED FUNCTIONSANSI # Strike Marks Function

F01: PASSAGELatch by knob/lever either side.

I/S O/S

N

F02:BATHROOM*Latch by knob/lever either side. Deadbolt by turnpiece inside. Deadbolt deadlocks latch. To unlock from outside, remove emergency button, insert emergency key in access hole and turn. Optional coinkey assemblyavailable.

L

F19: PRIVACY*Latch by knob/lever either side except when projecteddeadbolt locks outside knob/lever and deadlocks latch. Deadbolt by turnpiece inside. Inside knob/lever retracts latch and deadbolt simultaneously, automatically unlocking outside knob/lever. To unlock from outside,remove emergency button, insert emergency key in access hole and turn. Optional coinkey assembly available.

LF

F22: PRIVACYLatch by knob/lever either side except when outside knob/lever is locked by inside turnpiece. Turning inside knob/lever or closing door unlocks outside lever. To unlock from outside, remove emergency button, insert emergency key in access hole and turn. Optional coinkey assembly available.

LJ

F31: EXITLatch by knob/lever inside, non-removable blank trimor no trim outside. Auxiliary latch deadlocks latch.

EX

DEADBOLT FUNCTIONS

F16: DEADLOCKDeadbolt by key either side. T

F17: DEADLOCKDeadbolt by key outside and turnpiece inside. P

F18: DEADLOCKDeadbolt by key one side only. S

F29: DEADLOCKDeadbolt by key outside. Inside turnpiece will retract but will not project deadbolt.

SC

DEADLOCK FUNCTIONSE06072: CYLINDER BY TURNPIECEDeadbolt by inside turnpiece or outside key. K

E06082: COMMUNICATINGSINGLE CYLINDER*Deadbolt by key from one side only.

L

E06062: DOUBLE CYLINDERDeadbolt by key either side. M

E06092: CLASSROOMDeadbolt by outside key.Turnpiece will retract but not project deadbolt.

S

TURNPIECEDeadbolt by inside turnpiece. X

*PRIVACY INDICATOR AVAILABLE

2101

2106

2101

2106

2102

2102

2102

2102

2101

2105

2105

2101

2101

2102

2102

2102

Cam

2102

21022102

2102

2102

2102

2102

2102

2102

2102

I/S

I/S

I/S

I/S

I/S

I/S

I/S

I/S

I/S

I/S

I/S

I/S

I/S

I/S


SUR

VIVO

R S

ERIE

S C

YLIN

DR

ICA

L LE

VER

SETS

8

495/26Titan Lever

Shown

MARKS GRADE 1#195, 295, 395, 495

MARKS GRADE 2#175, 275, 375, 475

DESCRIPTION ANSI # FINISHGROUPSCOMM.

CYL.

IC CORECYL.k

395Not Available

IC Core

COMM.CYL.

IC CORECYL.k

375Not Available

IC CoreN — N — PASSAGE F75

3, 4,10, 10B,26, 26D

L — L — PRIVACY F76LK — — — PRIVACY F76 MOD.P — P — PATIO F77

DC RDC DC RDC COMMUNICATING F80A RA A RA ENTRY F81B RB B RB ENTRY F82A

AB RAB AB RAB ENTRANCE F109AQ — AQ — EXIT F83S RS S RS CLASSROOM F84F RF F RF STOREROOM F86

DW RDW DW RDW INSTITUTION F87DA RDA DA RDA VESTIBULE F88FQ — FQ — EXIT F89T RT T RT CORRIDOR F90

TK RTK — — HOSPITAL/PRIVACY F90 MOD.GB RGB — — STORE DOOR F91BS RBS BS RBS SERVICE STATION LOCK F92H — H — HOTEL F93

DB RDB — — CLASSROOM INTRUDER F110DO — DO — DUMMY TRIM OUTSIDE —DT — DT — FULL DUMMY TRIM —NB — NB — COMMERCIAL PASSAGE F111FB RFB FB RFB COMMERCIAL STOREROOM F112SB RSB SB RSB COMMERCIAL CLASSROOM F113FEL RFEL — — ELECTRICALLY LOCKED —FEU RFEU — — ELECTRICALLY UNLOCKED —

• Backset: 2-3/4”; 2-3/8”, 3-3/4” & 5” Optional• Levers: Solid cast Zamac; w/ 1/2” return (Except 395, 495, 375 & 475)• Door thickness: 1-5/8” - 1-7/8”; 1-3/8” doors use K1904 spacer.• Cylinder: MARKS “C” keyway, 6 pin w/ 2 keys• UL Listed, 3 hour fire rated95 Series:• Latch #1834, Front: 1-1/8” x 2-1/4”; Throw: 9/16”; Stainless steel nose• Roses: Thru-bolted, 3-7/16” dia., spring loaded 2-#10 thru-bolts• Strike: #1135, 4-7/8” ASA curved lip strike75 Series:• Latch #1134, Front: 1-1/8” x 2-1/4”; Throw: 1/2”; Stainless steel nose• Roses: Thru-bolted, 3-1/4” dia., spring loaded 2-#10 thru-bolts• Strike: #1136, 2-3/4” “T” strike

standard features

295/10BCrescent Lever

Shown

SuRVIVOR SERIEScyLINdRIcAL LEVERSEtS ANSI 156.2 GRAdES 1 & 2

195/26DAmerican Lever

Shown

Standard & HI-SECURITY™ IC Core Models:Interchangeable Core models for 6 or 7 pin cores(not included).Accepts: Marks, Marks HI-SECURITY™, Medeco®, KeyMark™, Falcon,Schlage® small format & Best®. IC Core Tailpieces ARE Included.

k

survIvor serIesMarks USA Survivor Series locksets are the most durable cylindrical lever locksets. The series is offered in four lever styles, conventional cylinder, IC core for “Best” size cores and Schlage® as well as others. The Survivor Series locksets are backed byMarks lifetime mechanical warranty. All functions are available in six standard finishes, are UL Listed for 3-hour fire rating, and satisfy ADA requirements.

Grade 195 serIes leversets tested to

twIce bHMa cycles



SUR

VIVOR

SERIES C

YLIND

RIC

AL LEVER

SETS

9

ANSI Grade Rose Diameter 1 3-7/16” 2 3-1/4”


clutcH systeMWhen locked, the Survivor’s clutch disengages the outside lever allowing it to turn freely without opening the latch. This reduces the torque applied to the outside lever. Other locksets with RIGID levers are prone to failure because of excessive torque.

suPer strenGtH retractorThe Survivor’s retractor is cast stainless steel with bronzeroller bearings for ultra-high strength, smooth operation & long life.

lonG lIfe lever suPPort sPrInGsEach Survivor rose containsit’s own proprietary high strengthlever support spring.Twice BHMA continuous cycles,NO LEVER DROOP . . .EVER!

strenGtH & lIfeSURVIVOR:• Withstands torque of 1800 inch-pounds; over twice ANSI/BHMA (1996) test value• Life tested over twice BHMA cycles; Fully operational after these tests• Thru-bolting with #10 epoxy coated bolts assures vibration-proof mounting• Only two thru-bolts for easy installation• Breakaway handles (American & Crescent design) protect against excessive abuse

QuIck InstallatIon• The Survivor easily adjusts for door thickness• 1-5/8” - 1-7/8” without the use of spacer plates or special tools• Adjustment is made by merely rotating outside rose• Spacer plates are available for 1-3/8” doors with K1904 spacer rings• Extend to 2-1/4” door thickness with D7 option


SUR

VIVO

R S

ERIE

S C

YLIN

DR

ICA

L LE

VER

SETS

10

R1981 R1983

1903

F1903-C

1903-L1903S 1903S-L

F1903S-C A1903H

AR1989S-Y F1903S-F19

Cylindrical Lock Tailpieces

Cylindrical IC Core Tailpieces

AR1989-Y F1903-F19

HR1984S HR1984-G


CYLINDRICAL LOCK TAILPIECESPART # FUNCTION CYLINDER1903 AB, B, DA (ext.), DW, F, FEL, FEU

MARKS 19821903S S, DA (int.), DB, DC, SB, T

1903-L AB, B, DA (ext.), DW, F, FEL, FEU Arrow PK 100C, Ilco 705, Lori 1539, Sargent 13-3266, Abloy, ASSA 65673, 656911903S-L S, DA (int.), DB, DC, SB, T

F1903-C AB, B, DA (ext.), DW, F, FEL, FEU Schlage 23-001, Primus, Corbin-Russwin 2000-034F1903S-C S, DA (int.), DB, DC, SB, T

A1903H H Marks 1982H, Schlage 23-014IC CORE TAILPIECES

HR1984 AB, B, DA (ext.), DW, F, FEU, FEL 6 or 7 pin Marks, KSP,Best®, Falcon, Medeco®,

Keymark™, Sargent®,Schlage® Small Format

HR1984S S, DA (int.), DB, DC, SB, T

HR1984-G AB, B, DA (ext.), DW, F, FEU, FEL6 or 7 pin Corbin

HR1984S-G S, DA (int.), DB, DC, SB, TAR1989-Y AB, B, DA (ext.), DW, F, FEU, FEL 6 or 7 pin YaleAR1989S-Y S, DA (int.), DB, DC, SB, T

Medeco®AR1999-M AB, B, DA (ext.), DW, F, FEU, FELAR1999S-M S, DA (int.), DB, DC, SB, TF1903-F19 AB, DW, F 6 pin Schlage®

Large FormatF1903S-F19 S, DA, DB, DC, SB, TR1981 SpacerR1983 Security Disc

uses Most avaIlable cylIndersOur locksets accept many other OEM standard, HI-SECURITY™ and IC Core cylinders using MARKS adapter tailpieces.

HR1984 HR1984S-G

easy InstallatIonSurvivor door preparation is simplifiedwith the fast and accurate, easy to useJ295 installation tool. One side is for the2-3/4” backset, the other for the 2-3/8” backset.For use with either wood or metal doors.

cylIndersThe Grade 1 Survivor is supplied with 6 pin cylinders inMARKS “C” keyway with 2 nickel-silver keys.The Grade 2 Survivor is supplied with 5 pin cylinders inMARKS “C” keyway with 2 brass keys.Grade 1 and Grade 2 are also available in 6 or 7 pin IC Coremodels for Best®, Corbin-Russwin, Medeco®, “Keymark™”,Schlage® & Yale sizes.

ada • Grades 1 & 2 • Meets by aMerIca• American & Crescent style levers returning to within 1/2” of door surface

• Satisfies all Federal ADA and State Disability requirements• ANSI/BHMA specification 156.2 (1996) Series 4000, Grade 1 & 2• UL Listed for 3 hour fire rating


SUR

VIVOR

SERIES C

YLIND

RIC

AL LEVER

SETS

11

SuRVIVOR SERIESREx & ELEctRIFIEd LEVERSEtS

ANSI 156.2 GRAdES 1 & 2

MARKS # EA195, EA295, EA395, EA495REX LEVERSETS FUNCTION ANSI # DESCRIPTION FINISH

GROUPSCONVENTIONAL CORE IC COREk

F RF STOREROOM F86 Latch by lever inside.Outside lever always locked.

3, 4,10, 10B,26, 26D

FEL RFEL ELECTRICALLYLOCKED —

Outside always locked electrically.Open by key outside, switch or loss of power.

Latch by lever inside.

FEU RFEU ELECTRICALLYUNLOCKED —

Outside always locked until unlockedby key or electrically energized.

Latch by lever inside.

MARKS # 195, 295, 395, 495ELECTRIFIED LEVERSETS FUNCTION DESCRIPTION FINISH

GROUPSCONVENTIONAL CORE IC COREk

FEL RFEL ELECTRICALLYLOCKED

Outside always locked electrically.Open by key outside, switch or loss of power.Deadlocking latch by lever inside. Lever only. 3, 4,

10, 10B,26, 26DFEU RFEU ELECTRICALLY

UNLOCKED

Outside always locked until unlocked by key orelectrically energized. Deadlocking latch

by lever inside. Lever only.

EA195/26DAmerican Lever

ShownEA295 Crescent Lever

Storeroom F86 FunctionShown

Bridge Rectifier

195 FEL / FEUAmerican Lever

Shown

survIvor wItH reQuest to eXItOur Grade 1 Electrified Survivor Series locksets featuring “The Clutch” are available for operation as either electrically locked orunlocked. When locked, the Survivor’s clutch disengages the outside lever allowing it to turn freely without opening the latch. TheGrade 1 Survivor Series Cylindrical Leverset incorporates a Request to EXit switch in both the Electrified (FEL & FEU) and Storeroom functions. Activating the inside lever for egress initiates the built-in REX output, providing a momentary signal for the access controlREX input for alarm shunt during egress with all the features of the Survivor Electrified Lockset

• Backset: 2-3/4”; 2-3/8”, 3-3/4” & 5” Optional• Latch #1834, Front: 1-1/8” x 2-1/4”; Throw: 9/16”; Stainless steel nose• Levers: Solid cast Zamac w/ 1/2” return• Rose: Thru-bolted, 3-7/16” dia., spring loaded 2-#10 thru-bolts• Strike: #1135, 4-7/8” ASA curved lip• Door thickness: 1-5/8” to 1-7/8” (For 1-3/8” door use K1704 spacer.)• Cylinder: MARKS “C” keyway, 6 pin w/ 2 keys or IC Core housing

• Electrified functions - 100% duty cycle, 24V/AC supplied with bridge rectifier; 24V/DC, .21 Amps• 12V/DC Optional, Contact factory for additional options• Request to Exit Switch: Single pole, double throw, 3 amp,125 AC, wired either normally open or normally closed (REX Switch is not standard on electrified leverset)• Features “The Clutch” for trouble free service• UL Listed, 3 hour fire rated

standard features

Standard & HI-SECURITY™ IC Core Models:Interchangeable Core models for 6 or 7 pin cores (not included).Accepts: Marks, Marks HI-SECURITY™, Medeco®, KeyMark™, Falcon, Schlage® small format & Best®. IC Core Tailpieces ARE Included.

k

Electrified Models


175

SER

IES

CYL

IND

RIC

AL

LEVE

RSE

TS

12

175 EcONOMy SERIEScyLINdRIcAL LEVERSEtS ANSI 156.2 GRAdE 2

175L/26D Cylindrical Leverset Shown

MARKS # 175FUNCTION ANSI # FINISH

GROUPSCOMM.CYL.

IC CORECYL.k

N — PASSAGE F75

26D, 10B

L — PRIVACY F76

P — PATIO F77

DC RDC COMMUNICATING F80

AB RAB ENTRY F109

AQ — EXIT F83

S RS CLASSROOM F84

F RF STOREROOM F86

DW RDW INSTITUTION F87

DA RDA VESTIBULE F88

FQ — EXIT F89

T RT CORRIDOR F90

BS RBS SERVICE STATION LOCK F92

DO — DUMMY TRIM OUTSIDE —

DT — FULL DUMMY TRIM —

NB — COMMUNICATING PASSAGE F111

FB RFB COMMUNICATING STOREROOM F112

SB RSB COMMUNICATING CLASSROOM F113

LEVERS ARE PACKED 6 PER CASE• IC Core Models: Tailpieces included, core not included

Standard & HI-SECURITY™ IC Core Models:Interchangeable Core models for 6 or 7 pin cores (not included).Accepts: Marks, Marks HI-SECURITY™, Medeco®, KeyMark™, Falcon,Schlage® small format & Best®. IC Core Tailpieces ARE Included.

k

• Backset: 2-3/4”• Latch #1134, Front: 1-1/8” x 2-1/4”• Levers: Solid cast Zamac; w/ 1/2” return• Roses: Thru-bolted, spring loaded 2-#10 thru-bolts (Inside rose cover included)• Strike: #1145/32D• Door thickness: 1-5/8” to 1-7/8”• Cylinder: MARKS “C” keyway, 6 pin w/ 2 keys

standard features

175 econoMy serIes Marks USA New 175 Grade 2 Economy Series gives you the performance and quality of a Grade 1 lockset at a Grade 2 price.Perfect for commercial applications in Office Buildings, Schools, Universities, Hospitals and much more. This series is offered in conventional cylinder, IC core for “Best” size cores, Medeco®, Corbin and Schlage® as well as others. All functions are available in two standard finishes, are UL Listed for 3-hour fire rating, satisfy ADA requirements and are backed by Marks lifetime mechanical warranty.


CYLIN

DR

ICA

L KN

OB

/LEVER FU

NC

TION

S

13

cylIndrIcal lever functIons

cyLINdRIcAL kNOB/LEVER FuNctIONSANSI 156.2 GRAdES 1 & 2

ANSI # CODE Marks Function

F75 PASSAGE:Latch by knob/lever either side.

I/S O/S

N

F76 PRIVACY:Latch by knob/lever either side unless outsideknob/lever locked by push-button from inside.Outside unlocks by turning inside knob/lever, outsideemergency turn or closing door.

L

F76 (MOD.) HOSPITAL/PRIVACY:Latch by knob/lever either side unless outsideknob/lever locked by push-button from inside.Outside unlocks by turning inside knob/lever, outside emergency turn-knob or closing door.

LK

F77 PATIO:Deadlocking latch by knob/lever either side unlessoutside knob/lever locked by push-button inside. Unlocks by turning inside knob/lever or closing door.

P

F80 COMMUNICATING:Key both sides. Locks or unlocks either knob/lever independent of the other. Deadlocking latch.

DC

F81 ENTRY:Deadlocking latch bolt by knob/lever either side exceptwhen outside locked by turn-button inside. Whenoutside locked, key outside or knob/lever inside opens lock. Turn-button operated manually.

A

F82A ENTRY:Deadlocking latch by knob/lever either side. Outsidelocked by push-button inside. When outside lockedby push-button inside, key opens lock, unlockspush-button. Inside knob/lever always opens latch. Closing door does not release push-button.

B

F83 EXIT:Deadlocking latch by knob/lever either side exceptwhen outside locked by turn-button inside. Inside knob/lever always opens latch. Turn-button operated manu-ally.

AQ

F84 CLASSROOM:Deadlocking latch by knob/lever inside.Outside knob/lever locked or unlocked by key.

S

F86 STOREROOM:Deadlocking latch by knob/lever inside, key outside.Outside knob/lever always locked.

F

F87 INSTITUTION:Both knob/levers always locked.Deadlocking latch by key both sides.

DW

F88 VESTIBULE:Deadlocking latch by knob/lever either side, exceptwhen outside knob/lever locked by key inside. Keyoutside retracts deadlocking latch. Inside always open.

DA

F89 EXIT:Deadlocking latch by knob/lever inside.Outside always locked.

FQ

F90 CORRIDOR:Deadlocking latch by knob/lever either side unlessoutside locked by key or inside push-button. Unlock by key, turning inside knob/lever or closing door.

T

ANSI # CODE Marks Function

F90 (MOD.) HOSPITAL/PRIVACY:Deadlocking latch by knob/lever either side unlessoutside locked by knob/lever or inside push-button. Unlock by turn-knob, turning inside knob/lever orclosing door.

I/S O/S

TK

F91 STORE DOOR (95 Series Leverset ONLY):Deadlocking latch by knob/lever either side except when both knob/levers are locked by key from either side.

GB

F92 SERVICE STATION LOCK:Deadlocking latch by knob/lever either side unlessoutside locked by key or inside push-button. Unlock by key, turning inside knob/lever or closing door, except when slotted push-button is turned in locked position. Inside knob/lever always opens latch.

BS

F93 HOTEL:Deadlocking latch by knob/lever inside. Outside knob/lever always locked. Inside push-button projects indica-tor on cylinder face shutting out all keys except emer-gency key. Turning inside knob/lever or closing door releases push-button.

H

F109 ENTRY:Outside locked by pushing turn-button inside. Keyoutside opens lock. Rotating inside knob/lever releases button and outside knob/lever. By pushing and turning inside button, outside knob/lever remains locked.Deadlocking latch.

AB

F110 CLASSROOM INTRUDER:Deadlocking latch by knob/lever either side, except when outside locked by key inside. Key outside locksor unlocks outside. Inside always open

DB

DUMMY TRIM: Outside only, rigid. DO

DUMMY TRIM: Both sides, rigid. DT

F111 COMMUNICATING PASSAGE:Blank outside. Deadlocking latch by knob/lever inside. NB

F112 COMMUNICATING STOREROOM:Blank outside. Deadlocking latch by key only. Knob/lever always locked.

FB

F113 COMMUNICATING CLASSROOM:Blank outside. Inside knob/lever locked or unlocked by key. Deadlocking latch.

SB

ELECTRICALLY LOCKED - FEL:(Fail Safe)Outside always locked electrically. Open by keyoutside, switch or loss of power. Deadlocking latchby lever inside. Lever only.

FEL

ELECTRICALLY UNLOCKED - FEU:(Fail Secure)Outside always locked until unlocked by key orelectrically energized. Deadlocking latch by lever inside. Lever only.

FEU


DEF

END

ER S

ERIE

S D

EAD

BO

LT &

DEA

DLA

TCH

ES

14

dEFENdER SERIEStuBuLAR dEAdBOLtS & cyLINdRIcAL cARtRIdGE dEAdLAtchES

MARKS # 130DESCRIPTION ANSI # FINISH

GROUPSCOMMERCIALCYLINDER

IC CORE CYLINDERk

K RK CYLINDER x TURNPIECE E0151

3, 10, 10B,26D, 32, 32D

L RL COMMUNICATING SINGLE CYL E0161M RM DOUBLE CYLINDER E0141S RS CLASSROOM E0171X — TURNPIECE x BLANK PLATE E0191

MARKS # 145DESCRIPTION ANSI # FINISH

GROUPSCOMMERCIALCYLINDER

IC CORE CYLINDERk

K RK CYLINDER x TURNPIECE E0121

3, 10, 10B,26D, 32, 32D

L RL COMMUNICATING SINGLE CYL E0131M RM DOUBLE CYLINDER E0111X — TURNPIECE x BLANK PLATE —

KL RKL CYLINDER BY LEVER —

• Bolt: 1” throw• Unitized assemblies for 2-1/8” bore• Strike: #1335, 2-3/4” x 1-1/8” strike• Door thickness: 1-5/8” to 1-7/8”

• Cylinder: MARKS “C” keyway, 6 pin w/ 2 keys• 2-3/8” Backset• Latch: 1” x 2-1/4” front

standard features

• Series 1 cylindrical cartridge• Latch: Grade 1, 9/16” throw• 2-3/4” Backset• Unitized assemblies for 2-1/8” bore• Strike: #1136, 2-3/4” strike

• Door thickness: 1-3/8” to 2-3/8”• Cylinder: MARKS “C”keyway, 6 pin w/ 2 keys• Latch: 1-1/8” x 2-1/4” front• UL Listed, 3 hour fire rated

standard features

130M/32D Tubular Deadbolt Shown

Standard & HI-SECURITY™ IC Core Models:Interchangeable Core models for 6 or 7 pin cores(not included).Accepts: Marks, Medeco KeyMark™, Falcon & Best®.IC Core Tailpieces ARE Included.

k

Standard & HI-SECURITY™ IC Core Models:Interchangeable Core models for 6 or 7 pin cores(not included).Accepts: Marks, Medeco KeyMark™, Falcon & Best®.IC Core Tailpieces ARE Included.

k

defender serIes deadbolts & deadlatcHesIn addition to our tubular style deadbolts, Marks USA has now developed a cylindrical cartridge deadlatch (145 Series). The result is aneasy to install deadlocking latch with a stainless steel nose and 9/16” throw. The Defender series are available in both conventional aswell as IC core cylinder models.

145K/32D Cylindrical Cartridge Deadlatch Shown


DEFEN

DER

SERIES D

EAD

BO

LTS & D

EAD

LATC

HES

15

dEFENdER SERIEStuBuLAR dEAdBOLtS & cyLINdRIcAL cARtRIdGE dEAdLAtchES

130M Shown130M Shown

Standard Door Prep: 2-1/8” bore“S” Function Door Prep: 1-1/2” bore

130K Shown

1403 1405 1403-L 1405-LF 1405-CF1403-C

sIMPle fast asseMbly• Defender is designed for quick easy installation• One piece assemblies• Unitized exterior and interior trim assemblies have no loose components• Tailpiece orientation and latch positioning, required on other deadbolts, is unnecessary• Trim and latch are fully reversible and can be assembled randomly

one cylInder fIts allThe Defender utilizes standard key-in-knob cylinders; same as MARKS cylindrical locksets.This important feature eliminates extra inventory of special cylinders making the key-in-knobcylinder inventory more versatile.• Provides access to largest variety of keyways• Models also available for 6 or 7 pin IC cores (Best™ size) IC CoreConventional

easy retrofIt deadbolt• Fits standard 2-1/8” diameter door prep• The Defender offers a choice of tailpieces for MARKS & other OEM cylinders• Fits 1-1/4” to 2-1/4” thick doors (Normally supplied for 1-3/4” door)• Marks USA adapter tailpieces available for OEM conventional & IC Core cylinders

ProtectIve steel sHuttersThe Defender’s steel shutters on the interior assembly concealand protect the two hardened 1/4” mounting bolts which thru-boltthrough the latch assembly.

defender serIes unIQue features

PART # TAILPIECES FOR 130 DEADBOLTS

DOUBLE CYLINDER1373 1-5/16” to 1-3/8”

MARKS1382DC1374 1-5/8” to 2”

1375 2-1/8” to 2-3/8”SINGLE CYLINDER

1389 1-3/4” to 2-1/4” MARKS1382

TAILPIECES FOR 145 DEADLATCHES1403 1-5/8” to 1-7/8” MARKS

TAILPIECE 1405 2” to 2-1/4”F1403-C 1-5/8” to 1-7/8” SCHLAGE®

TAILPIECEF1405-C 2” to 2-1/4”1403-L 1-5/8” to 1-7/8” LORI / ILCO

TAILPIECES1405-L 2” to 2-1/4”

1389

1382DC 1382

1373 1374 1375


CU

STO

M L

OC

KSE

T D

IVIS

ION

16

cuStOM LOckSEt dIVISIONWE MAkE LOckSEtS tO SuIt yOuR NEEdS

About Marks USAMARKS USA was established in 1977 to serve a growing demand for a mortise lock manufacturing company who would satisfy the needs of an expanding market. Since then, the product line has grown to include residential and commercial locksets to meet and exceed the most stringent UL and BHMA/ANSI specifications. In 1989, the Custom Lockset Division was created to accommodate customers with special requirements of either lock function or design. Custom locksets have been developed for municipal and commercial applications as shown. These are various custom locksets developed to accommodate our customers needs. This is only a sampling of our solutions. We at the Custom Lockset Division welcome the opportunity to respond to special applications requiring a custom engineered lock product. We look forward to the challenge.

Create, share & spec your own custom vision for locking using our interactive website, where you can try-on hundreds of trim, escutcheon & finish options , on looks for doors inside & out www.designalock.com

5322

5641

5637

5647

5691

5690

5679

5697

LH22

WS600

WP02 W04


BEH

AVIO

RA

L HEA

LTH LO

CK

SETS

17

GRAdE 1 SERIES 195Bhd-LIG SLIdE BEhAVIORAL hEALth cyLINdRIcAL LOckSEtS

914

3116

514

CYLINDRICAL - 195BH

MORTISE - 5BH29

91451

4

3116

914

3116

514

CYLINDRICAL - 195BH

MORTISE - 5BH29

91451

4

3116

SERIES 195BHMARKS #

DESCRIPTION ANSI # FINISHCOMM. CYL. ACCEPTS

IC CORE CYL.*N — PASSAGE F75

32D

L — PRIVACY F76B RB ENTRY F82AS RS CLASSROOM F84F RF STOREROOM F86

DW RDW INSTITUTION F87DB RDB CLASSROOM INTRUDER F110DO — DUMMY TRIM OUTSIDE —DT — FULL DUMMY TRIM —NB — COMM. PASSAGE F111FB RFB COMM. STOREROOM F112SB RSB COMM. CLASSROOM F113FEL RFEL ELECTRICALLY LOCKEDFEU RFEU ELECTRICALLY UNLOCKED

STANDARD FEATURES:• Rating: ANSI A156.2 Grade 1, UL Listed 3Hr Fire Rating• 5- Point Ligature Resistant Slide Trim• Backset: 2 3/4” Standard, 2 3/8”, 3 3/4” and 5” available • Latch: #1834, stainless Steel Nose• Ergonomic solid cast Stainless Steel Slide, Slides down freely in the locked or unlocked

position• Escutcheon Plate solid cast Stainless Steel thru bolted for strength and easy installation• Meets BHMA 156.34 Anti Ligature Trim Standard• Tamper Resistant mounting screws • Strike: #1135, 4 7/8” ASA curved lip Strike• Door Thickness: 1 3/4”, consult factory for thicker doors• Cylinder: Conventional Key n Knob Cylinder, Marks “C” Keyway, 6 pin w/2 keys –

Available in IC and all OEM cylinder preps• Marks Hi-Security Cylinder available • Marks Stainless Steel Retractor - Long life 3X the BHMA Grade 1 cycle Standard• Antimicrobial Finish available – Code AM• Marks Lifetime Mechanical Warranty• Available in Most BHMA ANSI Functions

Standard & HI-SECURITY™ IC Core Models:Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco®, KeyMark™, Falcon, Schlage® small format & Best®. IC Core Tailpieces ARE Included.

OPTION


BEH

AVI

OR

AL

HEA

LTH

LO

CK

SETS 91

4

3116

514

CYLINDRICAL - 195BH

MORTISE - 5BH29

91451

4

311691

4

3116

514

CYLINDRICAL - 195BH

MORTISE - 5BH29

91451

4

3116

STANDARD FEATURES:• Rating: ANSI A156.13 Grade 1, UL Listed 3Hr Fire Rating• 5- Point Ligature Resistant slide Trim• Backset: 2 3/4” Standard, 2 1/2” Consult Factory• Latch: #1834, stainless Steel Nose• Ergonomic solid cast Stainless Steel Slide, Slides down freely in the

locked or unlocked position• Escutcheon Plate solid cast Stainless Steel thru bolted for strength and easy

installation• Meets BHMA 156.34 Anti Ligature Trim Standard• Tamper Resistant mounting screws • Ligature Resistant ADA Thumbturn available where applicable• Strike: #1135, 4 7/8” ASA curved lip Strike• Door Thickness: 1 3/4”, consult factory for thicker doors• Cylinder: Conventional Key n Knob Cylinder, Marks “C” Keyway, 6 pin w/2

keys – Available in IC and all OEM cylinder preps• Marks Hi-Security Cylinder available • Marks Stainless Steel Retractor - Long life 3X the BHMA Grade 1 cycle

Standard• Antimicrobial Finish available – Code AM• Marks Lifetime Mechanical Warranty• Available in Most BHMA ANSI Functions

SERIES 5BHMARKS # FUNCTION* ANSI # FINISH

KEYED SINGLE CYLINDER, NO DEADBOLTDW VESTIBULE

32D

EW STOREROOM F07 J CLASSROOM F05GL INSTIT. PRIVACY F26EL ELECTRICALLY LOCKEDEU ELECTRICALLY UNLOCKED

KEYED DOUBLE CYLINDER, NO DEADBOLTGC INTRUDER LATCHBOLT F32

32DGG CLASSROOM SECURITY WW INSTITUTIONAL F30

KEYLESSN PASSAGE F01

32DLJ PRIVACY F22

DUMMY TRIMDI DUMMY TRIM INSIDE

32DDO DUMMY TRIM OUTSIDEDT FULLY DUMMY

Standard & HI-SECURITY™ IC Core Models:Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco®, KeyMark™, Falcon, Schlage® small format & Best®. IC Core Tailpieces ARE Included.

*Consult Factory for more available functions

OPTION

18

GRAdE 1 SERIES 5Bhd-LIG SLIdE BEhAVIORAL hEALth MORtISE LOckSEtS


INSTITU

TION

AL LIFE SA

FETY LOC

KSETS

19

195SS SERIES - LEVERSINStItutIONAL LIFE SAFEty cyLINdRIcAL LOckSEtS

Standard & HI-SECURITY™ IC Core Models:Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks,Marks HI-SECURITY™, Medeco®, KeyMark™, Falcon, Schlage® small format & Best®

IC Core Tailpieces ARE Included. WHEN ORDERING IC CORE CYLINDER,ADD THE PREFIX “R” TO THE PART NUMBER ie: 5SS55RA/32D

*

195SSNShown

HI-SECURITYOPTION

SERIES 195SSMARKS #

DESCRIPTION ANSI # FINISHGROUPSCOMM. CYL. IC CORE CYL.*

N — PASSAGE F75

32D

L — PRIVACY F76LK — PRIVACY F76 MOD.P — PATIO F77

DC RDC COMMUNICATING F80B RB ENTRY F82A

AQ — EXIT F83S RS CLASSROOM F84F RF STOREROOM F86

DW RDW INSTITUTION F87DA RDA VESTIBULE F88FQ — EXIT F89T RT CORRIDOR F90

TK RTK HOSPITAL/PRIV. F90 MOD.GB RGB STORE DOOR F91 BS RBS SVC. STATION LOCK F92H — HOTEL F93

DO — DUMMY TRIM OUTSIDE —DT — FULL DUMMY TRIM —NB — COMM. PASSAGE F111FB RFB COMM. STOREROOM F112SB RSB COMM. CLASSROOM F113FEL RFEL ELECTRICALLY LOCKEDFEU RFEU ELECTRICALLY UNLOCKED

PACKED 6 PER CASE

Standard Features • ANSI-A156.2 Grade 1, UL listed 3 Hr. Fire Rating • Backset: 2-3/4” Standard, 2-3/8”, 3-3/4”, 5” Available • Latch #1834, stainless steel nose • Levers: Solid cast stainless steel • Roses: Thru-bolted, spring loaded, #10 thru-bolts • Strike: #1135, 4-7/8” ASA curved lip strike • Door thickness: 1-5/8” to 1-7/8” • Cylinder: MARKS “C” keyway, 6 pin w/ 2 keys • Stainless steel retractor • Clutch

OPTIONS CODE

For 2” doors D1

For 2-1/4” doors D2

Over 2-1/4” - 4” thickness D9

2-3/8” backset, 1” x 2-1/4” face E6

2-3/4” backset, 3/4” throw, Gr. 1 E8

5” backset, 9/16” throw, Gr. 1 E9

3-3/4” backset, 9/16” throw, Gr. 1 E10

Less cylinder G3

2-3/4” “T” strike S3

OPTIONS CODE

Sargent conventional cylinder F8

Corbin conventional cylinder F9

Corbin 6 pin IC core F12

Yale 6 pin IC core F14

Sargent IC core F20

Antimicrobial Finish Available

Option Code: AM


IN

STIT

UTI

ON

AL

LIFE

SA

FETY

LO

CK

SETS

20

5SS19 SERIES - LEVERSINStItutIONAL LIFE SAFEty MORtISE LOckSEtS

Function “LJ” F22:ANSI F22 Latch by lever either side except whenoutside lever is locked by inside turnpiece. Turninginside lever or closing door unlocks outside lever.To unlock from outside, remove emergency button,insert emergency key in access hole and turn.Optional coin key assembly available.

Standard Features Performance Specifications Life Test: 1,500,000 cycles minimum.

Trim SpecificationsExterior & Interior Trim: • Solid stainless steel interior and exterior tapered levers recessed into thru-bolted roses• Specially ergonomically designed integral grooved turn knob for elderly and handicapped access (Patent D#587556) on some functions.• Needle bearings ensure smoothness of operation• Clutch

Cylinder: Solid stainless steel cylinders with solid stainless steel security collars; Optional HI-SECURITY™ cylinders available Strike: 4-7/8” curved lip stainless steel w/tamperproof screws Door Thickness: 1-3/4” standard; Extended range available Door Prep: ANSI A115.1 lock face cutout, with 2-1/8” through hole for knob/rose assembly Backset: 5 Series: 2-3/4” standard, 55 Series: 2-1/2” optional Lock Front: Adjustable bevel steel backplate 1-1/4” x 8” x 7/64” thick, Cover plate 1/16” thick with tamper proof screws Latch: Solid stainless steel with antifriction latch lever, 3/4” throw (reversible) Aux. Deadlatch: 1/2” throw, (reversible) Case: Stamped steel 3/32” thick, zinc dichromate finish Hubs: Steel, 9/32” on diamond, 5/16” on square w/security separator Hub Lock Arm: (to lock hub) Steel 1/8” thick Spindles: Independent spring-loaded spindles

Standard & HI-SECURITY™ IC Core Models:Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks,Marks HI-SECURITY™, Medeco®, KeyMark™, Falcon, Schlage® small format & Best®

IC Core Tailpieces ARE Included. WHEN ORDERING IC CORE CYLINDER,ADD THE PREFIX “R” TO THE PART NUMBER ie: 5SS55RA/32D

*

HI-SECURITYOPTION

5SS19F/32DShown

MARKS #FUNCTION ANSI #

SERIES SS195 & 55

COMM.CYL.

FINISHGROUPS


32D

D OFFICE VEST.DW VESTIBULEE OFFICE F04 EW STOREROOM F07 J CLASSROOM F05JM, JR HOSPITAL F06 GL INSTITUTIONAL PRIVACY F26EL ELECTRICALLY LOCKEDEU ELECTRICALLY UNLOCKEDKEYED SINGLE CYLINDER, WITH DEADBOLTA ENTRANCE F08,

F10B ENTRANCE F21F DORMITORY F12 FS DORMITORY FW DORMITORY F13KEYED DOUBLE CYLINDER, NO DEADBOLTG APARTMENT F09 GC INTRUDER LATCHBOLT F32GG CLASSROOM SECURITYGR CLASSRM. SEC. w/HOLDBACKWW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLTAC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34FA DORMITORY F11FX DORMITORY F33 KEYLESSN PASSAGE F01 L BATHROOM F02LF PRIVACY F19 LJ PRIVACY F22EX EXIT F31 DUMMY TRIMDI DUMMY TRIM INSIDEDO DUMMY TRIM OUTSIDEDT FULLY DUMMY

Quick Privacy AccessA9618-1 Shown;Option Code A25

CODE:G1 & G3

For IC CoreOption

Antimicrobial Finish Available

Option Code: AM


INSTITU

TION

AL LIFE SA

FETY LOC

KSETS

21

MARKS # 31SS55FUNCTION ANSI # FINISH

GROUPSCOMM.CYLINDER

IC CORE CYLINDERk

KEYED SINGLE CYLINDER, WITH DEADBOLT

32D K RK CYLINDER x KNOB E06071

S RS CLASSROOM E06091

standard features 31SS55K/32D Mortise Deadlock

ShownPerforMance sPecIfIcatIons

Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI A156.5-2001 for series 31, Grade 1. Fire Test: UL Listed, 3 hour fire rated.

trIM sPecIfIcatIons

Interior Trim:Solid stainless steel interior trim including finger indented safety knobs whichrecess into solid brass through-bolted roses.

Series 31 Deadlock Specifications ANSI E06071 Cylinder x TurnpieceDeadbolt by outside key. Interior safety knob will retract but not project deadbolt. Backset: 2-3/4” Strike: #4035 1-1/8” x 3-1/8” standard, #3135 4-7/8” x 1-1/4” optional Bolt Throw: 1” Stainless steel with hardened roll pins Case: Stamped steel Front: 1-1/16” x 4-5/8” adjustable bevel Cylinder: Solid brass cylinder, 6-pin,“C” keyway. Optional HI-SECURITY™ cylinders available.

180SSN/32D Shown

180SSK/32D Shown


k


k

standard features

PerforMance sPecIfIcatIons

Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications A156.2-2003 for series 1000, Grade 1. Fire Test: UL Listed, 3 hour fire rated.

trIM sPecIfIcatIons

Exterior & Interior Trim: • Solid stainless steel interior and exterior tapered knobs recessed into thru-bolted roses• Specially designed finger indented safety knobs with recessed grip and ergonomically designed integral grooved turn knob for elderly and handicapped access (Patent #D587556).• Needle bearings ensure smoothness of operation

1SS55K Cylindrical Deadlatch Lockset: ANSI E0121 Cylinder x KnobLatch by knob inside, key outside. Strike: #1136, 2-3/4” “T” strike; #1135 4-7/8” ASA strike optional Door Prep: ANSI 115.2 Latch: ANSI 156.2, Grade 1, 3 Hour fire rated Door Thickness: 1-3/4” Backset: 2-3/4” Backset; 3-3/4” and 5” backsets also available Latch Face: 1-1/8” x 2-1/4” with tamper proof screws Cylinder: Solid brass cylinder, 6-pin, “C” keyway; Optional HI-SECURITY™ cylinders available

1SS55N Cylindrical Lockset: ANSI F75 PassageLatch by knob either side, always open. Strike: #1136, 2-3/4” “T” strike Door Prep: ANSI 115.2 Latch: ANSI 156.2, Grade 1, 3 Hour fire rated Backset: 2-3/4” backset standard, 2-3/8” backset optional; 3-3/4” and 5” backsets also available Latch Face: 1-1/8” x 2-1/4” with tamper proof screws Latch Throw: 9/16”

MARKS # 1 SS55FUNCTION ANSI # FINISH

GROUPSCOMM.CYLINDER

IC CORECYLINDERk

KEYED SINGLE CYLINDER, WITH DEADBOLT

32D K RK CYLINDER x KNOB E0121

KEYLESS

N — PASSAGE F75

5SS55 SERIESINStItutIONAL LIFE SAFEty cyLINdRIcAL LOckSEtS ANSI 156.2 GRAdE 1

& MORtISE dEAdLOckS ANSI 156.5 GRAdE 1


INST

ITU

TIO

NA

L LI

FE S

AFE

TY L

OC

KSE

TS

22

SS55 SERIES - kNOBSINStItutIONAL LIFE SAFEty MORtISE LOckSEtS

standard features

MARKS #5 & 55 SS55

FUNCTION ANSI # FINISHGROUPSCOMM.

CYL.IC CORE CYL.k


32D

D RD OFFICE VEST.DW RDW VESTIBULEE RE OFFICE F04 EW REW STOREROOM F07 J RJ CLASSROOM F05JM, JR RJM, RJR HOSPITAL F06 GL RGL INSTITUTIONAL PRIVACY F26EL REL ELECTRICALLY LOCKEDEU REU ELECTRICALLY UNLOCKEDKEYED SINGLE CYLINDER, WITH DEADBOLTA RA ENTRANCE F08, F10B RB ENTRANCE F21F RF DORMITORY F12 FS RFS DORMITORY FW RFW DORMITORY F13KEYED DOUBLE CYLINDER, NO DEADBOLTG RG APARTMENT F09 GC RGC INTRUDER LATCHBOLT F32GG RGG CLASSROOM SECURITY

GR RGR CLASSROOM SECURITYw/HOLDBACK

WW RWW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLTAC RAC ENTRANCE F35 C RC STOREROOM F14 FC RFC INTRUDER DEADBOLT F34FA RFA DORMITORY F11FX RFX DORMITORY F33 KEYLESSN — PASSAGE F01 L — BATHROOM F02LF — PRIVACY F19 LJ — PRIVACY F22EX — EXIT F31 DUMMY TRIMDI — DUMMY TRIM INSIDEDO — DUMMY TRIM OUTSIDEDT — FULLY DUMMY

PerforMance sPecIfIcatIons

Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications A156.13-2005 for series 5000, Grade 1. Fire Test: UL Listed, 3 hour fire rated.

trIM sPecIfIcatIons

Exterior & Interior Trim: • Solid stainless steel interior and exterior tapered knobs recessed into thru-bolted roses• Specially designed finger indented safety knobs with recessed grip and ergonomically designed integral grooved turn knob for elderly and handicapped access (Patent #D587556)• Needle bearings ensure smoothness of operation

Cylinder: Solid brass cylinders with solid brushed chrome security collars. Optional HI-SECURITY™ available. Strike: 4-7/8” curved lip stainless steel w/tamperproof screws. Door Thickness: 1-3/4” standard. Extended range available. Door Prep: ANSI A115.1 lock face cutout, with 2-1/8” through hole for knob/rose assembly. Backset: 5 Series: 2-3/4” standard, 55 Series: 2-1/2” optional Lock Front: Adjustable bevel steel backplate 1-1/4” x 8” x 7/64” thick. Cover plate 1/16” thick with tamper proof screws. Latch: Solid stainless steel with antifriction latch lever, 3/4” throw (reversible). Aux. Deadlatch: 1/2” throw, (reversible). Case: Stamped steel 3/32” thick, zinc dichromate finish. Hubs: Steel, 9/32” on diamond, 5/16” on square with security separator. Hub Lock Arm: (to lock hub) Steel 1/8” thick. Spindles: Independent spring-loaded spindles.


k

5SS55FD/32D Mortise Lockset Shown

serIes InstItutIonal lIfe safety locksetsMarks USA Custom Lock Division has developed ANSI Grade 1 Institutional Life Safety Locksets to address Managed Liability,Accident Prevention, Life Safety and Security in Behavioral Health Care Institutions. The shape and construction of the SS55 & SS19 Series locksets are designed to restrict the attachment of lines, laces, etc. to door knobs and levers. In addition, with the knobs/levers recessed into the rosettes, the chance of capturing a line between the knob/lever and rosette is substantially eliminated.

Antimicrobial Finish Available Option Code: AM


HO

SPITAL PU

SH/PU

LL PAD

DLESETS

23

standard features

1PDN/32D Cylindrical Paddleset Shown

MARKS #5 & 55 PD FUNCTION ANSI # FINISH

GROUPSKEYED SINGLE CYLINDER, NO DEADBOLT

32D

D OFFICE VEST.DW VESTIBULEE OFFICE F04 EW STOREROOM F07 J CLASSROOM F05JM, JR HOSPITAL F06 GL INSTITUTIONAL PRIVACY F26EL ELECTRICALLY LOCKEDEU ELECTRICALLY UNLOCKEDKEYED SINGLE CYLINDER, WITH DEADBOLTA ENTRANCE F08, F10B ENTRANCE F21F DORMITORY F12 FS DORMITORY FW DORMITORY F13FD APARTMENT F20 H HOTEL F15LH SPECIAL PRIVACYKEYED DOUBLE CYLINDER, NO DEADBOLTG APARTMENT F09 GC INTRUDER LATCHBOLT F32GG CLASSROOM SECURITY GR CLASSROOM SECURITY w/HOLDBACKWW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLTAC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34FA DORMITORY F11FX DORMITORY F33 KEYLESSN PASSAGE F01 L BATHROOM F02LF PRIVACY F19 LJ PRIVACY F22EX EXIT F31

Cylindrical:• Backset: 2-3/4” standard, 2-3/8”, 3-3/4” and 5” optional• Strike: #1136, 2-3/4” “T” strike; #1135 4-7/8” ASA strike optional• Government standard #161Mortise:• Backset: 5 Series 2-3/4”, 55 Series 2-1/2”• Strike: #9035, 4-7/8” ASA curved lip strike

• Door Thickness: 1-3/4”, self adjusting for thicker doors • ANSI-A156.2, Grade 1• Lead lining and engraving available• ADA Compliant • Non-Handed• Functional, modern design with variable mounting positions• Standard 32D finish, consult factory for available finishes• Easily reversible configuration for push or pull styles

5PDN/32D Mortise Paddleset Shown

MARKS # 1 PD FUNCTION ANSI # FINISH GROUPSKEYLESS 32D N PASSAGE F75


k

Pd SERIES hOSPItAL LOckSEtScyLINdRIcAL & MORtISE PuSh/PuLL PAddLESEtS

cyLINdRIcAL ANSI 156.2 GRAdE 1 & MORtISE ANSI 156.13 GRAdE 1Pd serIes HosPItal locksetsOur unique cylindrical and mortise hospital push/pull paddlesets feature universal assemblies where you can choose to installhandles to point two-up or two-down or one-up and one-down. No handing needed. Marks USA design innovation also produced an improved short angle design meaning easier hands free push/pull for the user. Great retrofit, superior for new construction!


lIfetIMe MecHanIcal warranty; 2 year electronIc warranty

I-QW

IK S

ERIE

S EL

ECTR

ON

IC A

CC

ESS

CO

NTR

OL

24

IQ1LITE Cylindrical Model Shown;19 Black Powder Coat finish with

26D Satin Chrome Plated American Levers

MARKS #LOCKSET TYPE # OF

USERSFINISH

GROUPSFor Finish 19 For Finish 26D

IQ1LITE IQ1L/26D Cylindrical Lockset

160

19:Black Powder

Coat with26D Satin Chrome Plated American

Levers

26D:Satin Chrome

Plated

IQ2LITE IQ2L/26D Mortise Lockset

IQ7LITE IQ7L/26DRim Exit Device Interface

Adapter plates operate most manufacturers Rim Exit DevicesAdapter plates for Mounting Exit Devices are sold separately, see page 21.

IQ1 lIte cylIndrIcal lockset Door Thickness: 1-3/4” standard For thicker doors, Consult factory

Handing: Non-handed Key Override: Marks “C” keyway, 6 pin w/2 keys, IC Core optional Lock Body: Cylindrical “Survivor” featuring the “Clutch” for trouble free service Latch: Grade 2, 2-3/4” backset, 1/2” throw, 3 Hour UL fire rated Strike Plate: 4-7/8” ASA strike

IQ2 lIte MortIse lockset Door Thickness: 1-3/4” standard For thicker doors, Consult factory

Handing: Field reversible Key Override: 1-1/8” Mortise cylinder, 6 pin w/2 keys Lock Body: Grade 1, Series 5, 2-3/4” backset, 3/4” anti-friction latch, 3 Hour UL fire rating Auxiliary Latch: 1/2” throw Bolt Throw: 1” (Optional deadbolt functions - Consult factory) Clutch: The “Clutch” for trouble free service Strike Plate: 4-7/8” ASA standard

IQ7 lIte rIM eXIt devIce Interface Door Thickness: 1-3/4” standard For thicker doors, Consult factory

Handing: Non-handed Key Override: 1-1/8” Mortise cylinder, 6 pin w/2 keys Clutch: The “Clutch” for trouble free service

Adapter plates operate mostmanufacturers Rim Exit Devices .

Adapter plates for Mounting Exit Devicesare sold separately, see page 21 .

• CableGardTM protects wires for easy installation• Standard ANSI door prep with one additional hole• Pre-programmed code• Keypad programmable• 160 User codes• Temporary user codes• Passage mode

• Pin only mode• Double code entry for maximum security• Two wire remote release• 16 Digit tactile metal keypad• Weatherproof standard• Audible & visible entry indicator• Audible low battery alert

• 4 “AA” batteries, 95,000 operations• Easy installation

I-QwIk lIte standard features

lockset sPecIfIcatIons

I-QWIk LItE ELEctRONIc AccESS cONtROLNO-NONSENSE AccESS cONtROL RIGht Out OF thE BOx!

PROGRAMMING

INStALLAtION


I-QW

IK SER

IES ELECTR

ON

IC A

CC

ESS CO

NTR

OL

lIfetIMe MecHanIcal warranty; 2 year electronIc warranty

25

IQ7DATA/26D Rim Exit DeviceInterface Model Shown

• For the IQ7 LITE standard features and lockset specifications, see page 18.• Additional finishes, consult factory

standard features

I-QWIk SERIES ELEctRONIc AccESS cONtROLRIM ExIt dEVIcE StANd ALONE AccESS cONtROL

MARKS # LOCKSETTYPE

FINISHGROUPSFor Finish 19 For Finish 26D

IQ7LITE IQ7L/26DRim Exit Device Interface

Adapter plates operate most manufacturers Rim Exit DevicesAdapter plates for Mounting Exit Devices are sold separately, see below.

19:Black Powder Coat

with 26D Satin Chrome Plated

American Levers

26D:Satin Chrome

Plated

DESCRIPTION PART #

M9900 - Von Duprin 99 Rim Adapter Plate/Detex Advantex 10 Series Rim Adapter Plate E7071

Precision 1100 Rim Adapter Plate E7072

Yale 7100 Rim Adapter Plate/Corbin ED5200 Rim Adapter Plate E7073

Dorma 9300 Rim Adapter Plate E7074

Sargent 8800 Rim Adapter Plate/Arrow 3800 Rim Adapter Plate E7075

Precision 21 Rim Adapter Plate/Precision 2100 Rim Adapter Plate** E7076

Von Duprin 88 - Special Order, Consult Factory E7077

Monarch 18R Exit Device Adapter Plate E7078

** MUST USE PRECISION #BP21 BACKPLATE

Rim exit device interface with a choice of adapter plates to fit most rim exit devices (available separately) are listed below:adaPter Plates


SCH

OO

L &

CLA

SSR

OO

M L

OC

DO

WN

™

26

LOcdOWN™

FOR AddEd SAFEty IN AN EMERGENcy, tEAchERS cAN LOck thEIR cLASSROOM dOORS FROM thE INSIdE WIth thE LOcdOWN™ SERIES cLASSROOM LOckS By MARkS uSA.

avaIlable In all lever and escutcHeon trIM

• At the first sign of trouble outside, lock down a classroom instantly

• Faculty & students remain safely within classroom, no need to open door

• The interior lever is capable of retracting the latch at any time

• Available as cylindrical locks with cylindrical function F110 or as mortise locks with mortise function F32

• Double-cylinder cylindrical lockset built to ANSI/BHMA Grade 1 specs

• Can be ordered with levers that meet the ADA, Life Safety and local jurisdiction codes

• Mortise locks meet or exceed ANSI/BHMA 156.13 Grade 1 specifications

• Easy Retro-Fit Installationlevers avaIlable to accePt followInG oeM

cylInders:Yale Conventional, Sargent Conventional, Corbin Conventional, Corbin 6 Pin IC Core, Corbin 7 Pin IC Core, Yale 6 Pin IC Core, Yale 7 Pin IC Core, Schlage 6 Pin IC Core, Sargent IC Core, Medeco IC Core Large Format, BEST, Falcon SFIC

serIes for every educatIonal buIldInG and doorTypical Classroom function cylindrical locksets are designed to be locked or unlocked from the exterior, with the interior always in an open position. The new LocDown™ Classroom Intruder Lockset by MARKS USA, is designed to be locked or unlocked from the exterior, always open on the interior, but allows in emergency life safety situations, the teacher to secure the classroom without stepping into the hallway to lock the outside handle. For More on our K-12/Campus Security Solutions also visit www.savischool.com

F110 Classroom IntruderDeadlocking latch by knob/lever either side; except when outside locked by key inside. Key outside locks or unlocks outside; inside always open

DB

F32 Intruder Latch BoltLatch by knob/lever either side except when outside knob/lever is locked from inside or outside by key. Auxiliary latch deadlocks latch bolt when door is locked. Inside knob/lever is always free from immediate egress. Latch operated by key from inside or outside.

GC

Classroom SecurityLatch by knob/lever either side except when outside knob/lever is locked from inside or outside by key. Auxiliary latch deadlocks latch bolt when door is locked. Inside knob/lever is always free for immediate egress.

GC

Classroom Security w/HoldbackLatch bolt retracted by knob/lever from either side unless outside is locked by key from either side. When locked, latch bolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latch bolt when door is locked. Depress inside knob/lever and turn key 360º for holdback feature. Inside knob/lever always free for immediate egress.

GR


SCH

OO

L & C

LASSR

OO

M LO

CD

OW

N™

27

LOcdOWN™

FOR AddEd SAFEty IN AN EMERGENcy, tEAchERS cAN LOck thEIR cLASSROOM dOORS FROM thE INSIdE WIth thE LOcdOWN™ SERIES cLASSROOM LOckS By MARkS uSA.

Unlocked

Locked

Standard FeaturesPerformance Specifications:

Life Test 1,500,000 cycles, minimumStrength Test: 530 inch lbs. torque on exterior lever. When applied, lockset

remains locked. (Torque of over 550 inch lbs. will cause spindle failure. However, lockset remains locked once spindle is replaced, lockset is fully operational.)

ANSI Test Certified to meet or exceed all operational and security tests of ANSI/BHMA A156.13-2012 for series 1000, Grade 1.

Fire Test: UL listed, 3 hour fire rated; Meets ADA requirements.Function Specifications: LA318GJ Classroom Intruder:Latch by lever either side except when outside lever is locked from inside or outside by key. When locked, exterior key will retract latchbolt. Outside key locks or unlocks exterior lever. Inside key is single acting in one direction and will lock exterior lever only; will not unlock exterior lever. Auxiliary latch deadlocks latch. Inside always free for egress

Trim: Cast satin stainless steel escutcheon 8-1/2”x2-3/4”x7/16”. Recess in escutcheon to accept cylinder with rotating cylinder ring. Cast screwless satin stainless steel lever handles to within 1/2” from face of door secured to escutcheon plate with hardened steel retainer ring. Lever handle, with spring-loaded torque sensitive 5/16” spindle. Integral torque override preventer recessed into escutcheon plate. Spindle will yield if excessive torque applied, preventing any damage to lock body.

Exterior: Two ¼” diameter threaded thru posts.Two ¼” diameter center posts pass thru lock body, automatically aligning trim.

Interior: Two #10-32 phillips head stainless steel mounting thru bolts. Escutcheon with “LOCK” and directional arrow engraved and black filled near cylinder location. Occupancy indicator ecessed into escutcheon plate. Indicator window to display unlocked (green day-glo) and LocDown™ (red day-glo) positions

Cylinders: Two 1-1/8”, 6-pin solid brass with 2101 cam int., 2105 cam ext., with two keys. Outside cylinder rotates in both directions. Inside cylinder rotates in one direction only. Cams supplied to accommodate Corbin™, Sargent™ and Schlage™ cylinders.

Strike: 4-7/8” X 1-1/4” X 3/32” thick, 5/8” curved lip.Conforms to ANSI spec. 115.1.

Door Thickness: 1-3/4”Lock Body: 5 series “GJ” function double cylinder lock. Lock handing

completely reversible without opening lock case

INTERIOR TRIM

For More Marks & Napco School Solutions & Resources on K12/Campus Security Risk Reduction see www.SAVISchool.com


AR

CH

ITEC

H™ D

ESIG

NER

WIR

ELES

S A

CC

ESS

CO

NTR

OL

PLA

TfO

RM

28

ARchItEch™

dESIGNER WIRELESS AccESS cONtROL PLAtFORM

SerieS: Standalone, networked, enterpriSeArchiTech™ Series Networx® Locks are an ideal access control solution; elegantly blending advanced wireless access control convenience within any décor, in an attractive, infinitely customizable designer locking form factor, in choice of trims and finishes. Ideal for educational, commercial office or multi-dwelling residential settings, these stylish, durable locks, leveraging proven Networx access control technology, offer a choice of ID credential technology, and can be used to control access a door at a time; across a wireless network; or as an integral part of a new or existing enterprise security system—spanning a few, or thousands of doors, in one building, a campus or multiple sites around the world.

• All Applications and Doors - Cylindrical and Mortise models for wood and metal doors, for new and existing applications, with wireless surface mount or mortised-in electronics and batteries.

• Customize To Match Any Aesthetic Look, For Every Décor - Over 300 locks, levers, roses and finishes to choose from, durable ANSI/BHMA Grade 1 hardware over 300 locks, levers, roses and finishes

• Future-Proof Multi-Technology Access ID Credentials Replace Cumbersome Keys – HID® Prox, Mag Stripe, Smart Cards, PIV, keyfobs and remote buttons

• Emergency Lock-Down option via lock, button, keyfob or server (where networked). (Global Unlock via server too.)

• Proven, Low Maintenance, Wireless Installation And Unsurpassed Battery-Life with Advanced Power- Saver circuit, with years of use in even high-traffic areas, using off-the-shelf AA batteries.

• Flexible System Programming Locally using a USB Gateway or remotely across a wireless network (using free Alarm Lock DL-WINDOWS Windows- based software) or integrated on an enterprise class IT environment, in realtime, using LENEL

• Networking Choices – Choose 802.11 or Ethernet network, with wireless encrypted bi-directional gateways, in which many locks communicate to a single gateway, expander, or use a wireless RF USB Gateway equivalent. For entry door applications and the like, used in conjunction with strikes and mags, use with Networx NetPanels. Or, use as a single-door control, in real time, as part of the IT-Network environment, with Continental Access CA4K®, Lenel OnGuard® Integrated Access Control & Video Security or Software House Connected Partner Program® Platforms.‡

Performance Overview

MORTISED NETWORX

CONTROL UNIT SURFACE-MOUNTED

NETWORX CONTROL UNIT

DOOR CONTACT SENSOR

SURFACE-MOUNTED NETWORX

CONTROL UNIT DOOR

CONTACT SENSOR

SURFACE-MOUNTED NETWORX

CONTROL UNIT DOOR

CONTACT SENSOR

(rear) (front)

(outs ide)

(ins ide)

PROXIMITY READER

(OVAL AND RECTANGULAR)

PROXIMITY READER


PROXIMITY READER


PROXIMITY READER


DOOR CONTACT MAGNET

(TWO TYPES)

DOOR CONTACT MAGNET

(TWO TYPES)

DOOR CONTACT MAGNET

(TWO TYPES)

DOOR CONTACT MAGNET

(TWO TYPES)

Standard Configurations

Features:• 5000 Users, 500 Scheduled Events & 40,000 Event

Audit Trail• Surface-Mount or Mortised-in Electronics and

Battery Pack• Lock available in Mortise and Cylindrical versions• Real Time Clock• Uses 4 AA Batteries – 3 year battery life, typ. using

advanced Power-Saver circuit• Operated via access card, keyfob or bluetooth

enabled iLock® App.

• DL-Windows Software for programming Or in enterprise networx, in real time, use with Continental Access® CA4K®, Lenel OnGuard® Integrated Access Control & Video Security or Software House Connected Partner Program® Platforms

• USB Radio Gateway Method or Via Networx Gateways (Ethernet, 802.11 or POE)

• Manual Card Enrollment Option for Quick Installation

• Wireless programming range: up to 100 ft.• ANSI / BHMA Grade 1 Certified, UL Listed 3 Hours

• Auto-Deadbolt option for automatic keyless locking of deadbolt upon exiting, ideal for residential applications

• Includes standard lever rose hardware design• Mortise version compatible with all 300+ optional

architectural trim / lever or knob designs• Stainless steel latch, 2-3/4” backset• Auto-Reverse lock body tested to 6 million cycles• Lock Body - Self cleaning long life motor• Door closure monitor / electronic deadbolt monitor• Key override standard or high-security • Optional integrated door position indicator switch


AR

CH

ITEC

H™ D

ESIGN

ER WIR

ELESS AC

CESS C

ON

TRO

L PLA

TfOR

M

29

ARchItEch™ N90LIdEAL FOR SchOOL & cAMPuS SAFEty

Mortise; Surface Mounted Electronics

Cylindrical; Surface Mounted Electronics (back box not shown)

Mortised-in electronics and batteries

Mag Reader KeypadConcealed electronics

• Designer Wireless Access Control Networked Locks include multi-technology ID reader access control convenience for any door and decor, with choice of handles, finishes and reader shape

• Easily, securely networked via 802.11 or ethernet, spanning a few or thousands of doors, in one building, a campus or multiple sites in an enterprise (also available in standalone model)

• Emergency LocDown Keyfobs & Flashing Strobe Indicator - In emergency, lockdown one or multiple locks globally with remote pocket sized keyfob. Lockdown indicator vividly flashes on the inside door, confirming lock activation and providing peace of mind to occupants

• Programmable Lockdown/Unlock Privileges - For added security, programmable user privileges can be varied by group, i.e., all users can be given global lockdown privileges, while only select users can have both lockdown & unlock privileges, etc.

• Cylindrical ArchiTech Locks neatly, quickly retrofit any standard door lock, with easy surface mount electronics, for use in all applications - Including wood and metal doors, for new and existing applications

• Customizable oval or square Access ID Reader, in black or silver and three levers to choose from - American 195, Crescent 295 & Titan 495 - See lever photos on back

• Future-Proof Multi-Technology Access ID Credentials Replace Cumbersome Keys – HID® Prox, Mag Stripe, Smart Cards, PIV, keyfobs and remote buttons

• Proven, Low Maintenance, Wireless Installation and Unsurpassed Battery-Life with Advanced Power-Saver circuit, for years of use in even high-traffic areas, powered by 4 off-the-shelf AA Batteries. 3 to 4 years, typ.

• Flexible System Monitoring, Control & Programming – Program locally using a USB Gateway or remotely across a wireless network (using free Alarm Lock DL-WINDOWS Windows- based software). Or, in Real-Time Enterprise platforms, using either Continental Access CA4K®, Lenel® OnGuard® or support via Software House® Connected Partner Program®

• Minimizing hardware & installation costs, a single gateway module can be placed anywhere in any size network and interface between the PC and up to 63 Networx locks. At its maximum, a, ArchiTech Networx system can comprise of up to 50 Gateways for the networking of up to 2000 locks or access controlled doors

• Compact LocDown Keyfob - Program up to 10 keyfobs per lock. For added security, program different users for global lockdown & unlock privileges

• Up to 5000 users/ credential holders, 500 Scheduled Events & 36,000 Event Audit Trail

• Non-handed for easy installation and versatility

LocDown Keyfobs - Staffers lock down one, or all networked doors in seconds

Lockdown Strobe Indicator flashes to confirm lock is in secure, lockdown mode

Choice of access ID credentials replace cumbersome keys

ArchiTech Lock Designs


AR

CH

ITEC

H™ D

ESIG

NER

WIR

ELES

S A

CC

ESS

CO

NTR

OL

PLA

TfO

RM

30

ARchItEch™


serIes: trIloGy networX Gen.2 Gateways & eXPanders

Verizon 12:55 PM 79%

iLock App is available from both iTunes and the Google Play Store

Use the iLock® App to unlock your Networx ArchiTech™ Bluetooth® Series Door Lock in seconds!

AL-IME2 Gen. 2 Gateway The Trilogy Networx AL Generation Gateway, interfaces Networx locks with a PC network via a hardwire Ethernet connection. It is very similar in function to the original hardwired Networx

Gateway Modules, but is enhanced with additional extended potential range, supporting up to seven (7) Expanders (model AL-IME2-EXP Expanders). Each Expander can extend the AL-IME2 Gateway’s coverage area by approximately 100 feet. Also both Gen. 2 Gateways and matching Expanders have a new modern styling, and three LED indicators, blending into any décor.

AL-IM2-80211 Gen. 2 802.11 GatewaySimilar to model above, but this 802.11 Gateway Module includes a bi-directional radio, and interfaces Networx locks with a PC network with hardwire Ethernet and wireless 802.11. It is very similar in function to the original 802.11 Networx Gateway Modules, but is enhanced with additional extended potential range, supporting up to seven (7) Expanders (model AL-IME2-EXP Expanders). Each Expander can

extend the AL-IM2-80211 Gateway’s coverage area by approximately 100 feet.

AL-IME2-POE Gen. 2 GatewayThe Trilogy Networx AL-IME2-POE (Power Over Ethernet) Hardwired Gateway interfaces Networx locks with a PC network with hardwire Power-Over-Ethernet. It is very similar in function to the original hardwired Networx Gateway Modules, but is enhanced with alternative power, and additional extended

potential range, supporting up to seven (7) Expanders (model AL-IME2-EXP Expanders).

AL-IME2-EXP ExpanderTrilogy® Networx™ Expander extends the coverage area of a Gen 2 Series Gateways to Trilogy Networx Locks within a PC network, allowing greater distances for the placement of up to a maximum rated capacity of 63 Networx locks per Version 2 Gateway.

AL-IME2-PIE Plug-in ExpanderThe Trilogy® Networx™ Plug-In Expander extends the coverage area of a Generation 2 Series AL-IME2 Gateway to Trilogy Networx Locks within a PC network, allowing greater .2 802.11 distances for the placement of up to a maximum rated capacity of 63 networx locks per Version 2 Gateway.

Introducing iLock, the easy smartphone mobile solution for unlocking your Trilogy® ArchiTech Bluetooth Series Designer Access Control Locks from any smart device without the need to carry cumbersome ID cards or keys. Password protected access is secure through the use of Bluetooth LE® and proprietary encryption. Additionally, an optional feature can be utilized, requiring a password for each unlock request.

The Key is Your Smartphone & More Secure TechnologyAny Smart Device can be the Access Key: Much more than an ID card displayed on your smartphone, for your security, ArchiTech & its iLock App are

wirelessly linked together, each supplying its portion of stored encrypted data to provide secure access without a key, fuss or worry, ensuring user identities. A unique combination of convenience and cloneproof peace of mind, the ArchiTech platform uses universally-compatible Bluetooth LE technology, so they can use any smart device to unlock ArchiTech on your door(s); and do so from afar, at a comfortable, customizable range of up to 30 feet away. For even greater security users

can add an optional passcode, entered on their phone App. Coming soon: emailable digital eKeys for guests or service temporary access, too.


AR

CH

ITEC

H™ D

ESIGN

ER WIR

ELESS AC

CESS C

ON

TRO

L PLA

TfOR

M

31

Networx Finish

9 Marks Function

5 = Mortise Handing

I = Electronic Insert Knob/ Lever designJ = Electronic Insert BluetoothS = Surface Mount ElectronicsT = Surface Mount Electronics esoR/etalPhtooteulBL = Lockdown

Design

Technology1 = Prox Oval2 = Prox Square

Mag Stripe4 =5 = Keypad7 = Keypad

A = Smart Oval Prox (iClass® Technology)B = Smart Square Prox (iClass® Technology)C = Concealed Prox (only with insert version)

L

BASE DISTRIBUTION MORTISE MODEL P/N SCHEME

5 I 1 RW

Style

86 FD 26D

Model

Series

N 9

Networx

Finish9

0 = Cylindrical Marks Function

Lever /Rose designS = Surface Mount ElectronicsT = SurfaceL = Lockdown

Mount Electronics Bluetooth

Technology1 = Prox Oval2 = Prox Square

Mag Stripe4 =7 = Keypad

A = Smart Oval Prox (iClass Technology)B = Smart Square Prox (iClass Technology)

Style

195 F 26D

Model

Series

N 9 0 I 1

BASE DISTRIBUTION CYLINDRICAL MODEL P/N SCHEME

ARchItEch™


serIes: trIM oPtIons and How to order

ArchiTech: Hundreds of Options for ArchiTech to be Customized. Select Standard Mortise & Tubular Lock Trim & Rose Options. See Page 5 For Trim Designs.

Standard Model Ordering. Infinite Custom Models Also Available, Call for Ordering Assistance

www.designalock.com Create your own custom lock looks Create and share a custom lock vision for any space or building with www.designalock.com interactive site for trying out various lock looks for locks inside and out. Ideal for Architects, Designers and Building Operating Management who want their access control and locking “look” to be as welcome as the security they provide.


EXIT

DEV

ICES

32

Surface Vertical Rod

MARKS # FUNCTIONM9900 VR Rim Panic Vertical RodM9900F VR Fire Rated Rim Panic Vertical RodM9900 - 48 VR Rim Panic Vertical Rod - 48”M9900F - 48 VR Fire Rated Rim Panic Vertical Rod - 48”

SPECIFICATIONS

Device Head Cover: Zinc alloy or stainless steelChassis: Steel, platedMechanism Housing: Extruded aluminumPush Bar Base: Extruded aluminumTouch Plate: Stainless steelEnd Cap: Stainless steelTop Latch: Stainless steel 37/64” (14.8mm)Top Strike: IncludedBottom Latch: Stainless steel 37/64” (14.8mm)Bottom Strike: IncludedLatch Case Covers: Steel, stainless steel or brassVertical Rods: Aluminum tubeHand: Non-handedMounting: Machine screws standard. Sex bolts optional. Order “SNB” for wood or unreinforced metal doorsDogging: Allen-type key furnishedFinish: 32DOutside Trim: Order separatelyStandard height: For 7’0” doorsUL Listed: ANSI/BHMA Grade1 Panic Exit Hardware, 3-Hour Fire Rating

APPLICATION• For use on single doors or pair of doors• 1-3/4”(44 mm) door thickness standard. Specify thickness other than 1-3/4”• RHR or LHR hollow metal, wood and mineral core doors• Minimum Stile Width : 3 1/2” (89 mm)

32D FINISH

SPECIFICATIONS

• Doors: 1-3/4” thick standard.• End cover: Flush mounted beveled “Panic Protector” design.• Strike: Roller strike.• Rail Assembly: Extruded Aluminum, 32D finish.• Dead latch Bolt: Stainless Steel 3/4” throw.• Dead latch Bolt: Stainless Steel 5/8”.• Dogging feature: Allen Key (M9900)• UL listed: For “Panic Hardware” and Fire Rated Model 3 hour fire

doors up to 38” x 86”.• ANSI: ANSI 156.3 (2001), requirements for Grade 1.• 3 Hour Fire Rating• Finish: 32D

MARKS # FUNCTION

M9900 Rim Panic

M9900F Fire Rated Rim Panic

M9900 - 48 Rim Panic - 48”

M9900F - 48 Fire Rated Rim Panic - 48”

OPTIONS

M9900 33” LENGTH FOR 36” DOOR

M9900 - 48” 42” LENGTH FOR 48” DOOR

• EXTRUSION HEAVY GAGE, 32D FINISH • PANIC PROTECTOR™ END CAP

• LIFETIME MECHANICAL WARRANTY • EASY INSTALLATION, ECONOMICAL

SERIES M9900 - ExIt dEVIcERIM MOuNt

SERIES M9900 VR - ExIt dEVIcE


EXIT DEVIC

ES

33

SERIES M9900 - ExtERIOR tRIM

MORTISE CYLINDER CAMS

M9907 MESC600A

M9908 MESC600F

M9909 MESC600A IC CORE HOUSING

M9910 MESC600A IC CORE HOUSING

KNK CYLINDER TAILPIECES

M9903 MLHL650A - CLIP ON

F1903.SCH MLHL650F - SCREW CAP

M9984 MLHL650A or F - IC CORE 627 PIN

CAMS & TAILPIECES

ENTRY LEVER TRIM• Standard Marks “C” Keyway KNK cylinder for panic device. • Cylinder locks or unlocks lever, rigid when locked; when unlocked retracts latch bolt.• Marks 26D Finish / Standard 1-3/4” Door Thickness • IC Prep Code G1, Less Cylinder G3

• Thru bolt design• Non Handed design. Easily field reversible.• Marks 32D Finish / Standard 1-3/4” Door Thickness• Standard Marks “C” Keyway 1-1/4 Mortise cylinder with special cam• IC Prep Code G1• Less Cylinder G3

Escutcheon Lever Design

M411 Lever/Rose Rim Panic Vandal Pull

MES600A Cylindrical Dogging Kit - 32D Rim Panic Vandal Pull w/ cylinder hole

M195F

M9901M9902

MVP/32D

MVPCC/32D

(cylinder not included)

MARKS # FUNCTION

M411 Finger Pill - no cylinderMESC600A Lever / Escuteon Trim EntryMESC600F Lever / Escuteon Trim StoreroomMESC600N Lever / Escuteon Trim Passage

MESC600DT Lever / Escuteon Trim Dummy TrimM9901 36 inch Panic Device Dogging KitM9902 48 inch Panic Device Dogging KitMVR8 Vertical Rod 8 ft extention - Code 8

MVR10 Vertical Rod 10 ft extention - Code 10MVRB Vertical Rod - Bottom Rod

MVP/32D Rim Panic Vandal PullMVPCC/32D Rim Panic Vandal Pull w/ cylinder hole


EXIT

DEV

ICES

34

SERIES M195 - ExIt dEVIcE tRIM

SPECIFICATIONS

Specification: Conforms to ANSI BHMA A156.3 Grade 1 Exit Device Requirement Standard ANSI/UL305 Standard for Safety for Panic Hardware 2013 California Building Code Sec. 11B-309.4For Doors: (Please specify when ordering non standard size doors) Thickness: Standard 1 3/4”, may fit with door thickness up to 2” Width: Standard 36” or 48”, may fit door width 30”~48”Mounting: Furnished Standard with Wood and Machine ScrewsHead Cover: Zinc AlloyChassis: AluminumRail Assembly: Heavy Gauge extruded aluminum with stainless steel on top of touch barEnd Cap: Zinc AlloyHand: Non-handedLatch Bolt: Stainless Steel, 3/4” (18mm) throwStrike: Roller Strike (Stainless Steel)Dogging: Allen Key (equipped on panic rate devices only)Finish: 32D: Satin Stainless Steel Finish 10B: Oil Rubbed Bronze FinishDimension: Touch bar height from finished floor: 41” (1041mm) from center of touch bar Touch Bar Projection: Neutral: 3 5/16” (84mm) Depressed: 2 19/32” (66mm) Head Cover: LxWxH: 206mm x 76mm x 71mm Device Length: 34 5/8” (88cm) for 36” door width 46 5/8” (118.5 cm) for 48” door width

MARKS # FUNCTION

M8800 Rim Panic

M8800 - 48 Rim Panic - 48”

SERIES M8800 - NARROW StILE ExIt dEVIcE

Standard & HI-SECURITY™ IC Core Models: Interchangeable Core

models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco®, KeyMark™, Falcon, Schlage® small format & Best®. IC Core Tailpieces ARE Included.*

M195 Series Leverset M295 Series Leversetw

M495 Series Leverset

OPTIONS CODEYale Conventional F7Sargent conventional cylinder F8 Corbin conventional cylinder F9 Corbin 6 pin IC core F12Corbin 7 pin IC core F13Yale 6 pin IC core F14 Yale 7 pin IC core F15Schlage 6 pin IC core F19Sargent IC core F20 Medeco IC core large format F21Less Cylinder G3

MARKS # TrimM195S/295/395/495 MLHL650SM195F/295/395/495 MLHL650FM195N/295/395/495 MLHL650NM195DT/295/395/495 MLHL650DT

Levers: Solid cast Zamac, with 1/2” return (except 395 & 495)Roses: Thru-bolted, 3-7/16” spring loaded RosesDoor Thickness: 1-5/8” – 1-7/8”Clutch: StandardChassis: AluminumCylinder: MARKS “C” keyway, 6 pin w/ 2 keys IC Core model - Core not included Lifetime Mechanical Warranty

Specifications


EXIT DEVIC

ES

35

with simultaneous dogging

ER Electric Latch Retractionwith simultaneous doggingFor: M9900Example: M9900/32D-EROperation: Momentary or maintained latch bolt and push pad retraction Automatic re-triggering of latch retraction Voltage: 24VDC @ 450 mA activation, 180 mA continuous602RF 1 Amp power supply (1 EMC max)632RF 2 Amp power supply (2 EMC max)EMC 2-station sequencer required for automatic doors only.Monitoring Available Latch status and REX output available

electric latch retraction

MARKS # DESCRIPTIONHEAVY DUTYM9900ER Electric Latch Retraction

M9900ERP Electric Latch Retraction w 602 Power Supply

EA Exit Alarm, 9V battery poweredEB Exit Alarm, 12-24V AC/DC input, 9V battery backupFor: M9900, M9900VRExample: M9900/32D-EA• 100 dB alarm; visual and audible On/Off status: Armed - green LED blinks every 4 seconds, Alarm mode - red LED, Bypass - no LED • Remote status output• 15 or 60 second arming delay• 2 modes: Continuous alarm with manual key reset; Automatic re-arm 2 minutes after door closes with any manual key reset before 2 minutes.Options: • Push pad sign • 6, 10 & 20 minutes alarm; 1 or 5 second re-arm delay • Remote access control, arm, disarm inputs • REX and latch status outputs

exit alarm

MARKS # DESCRIPTIONHEAVY DUTYM9900EA Exit Alarm 9VDCM9900EB Exit Alarm 9VDC w 12/24 AC/DC Input

Rim Mount, Vertical Rod & Mortise


Door sign included, Bar sign optional


EXIT

DEV

ICES

36

electric Frame actuator

EFA Hitower Pro Frame Actuator Controlled Fire Exit Device

Features include failsafe operation and unlocks by access control, power loss or signal from fire command center. Door stays latched even when unlocked. All wiring is maintained in the strike jamb. Complies with national building and fire codes

Specify Handing and Voltage: 24VDC, 24VAC, 115VAC

Monitoring AvailableMARKS # DESCRIPTIONHEAVY DUTY

M9900EFA HiTower Pro Fram Actuator Controller Fire Exit

Rim Mount, Vertical Rod & Mortise DG Electric Dogging (failsecure) M9100, M9900, M9900VR, M9300 Example: M9900/32D-DG

When energized by optional built-in or remote switch manual, depressing the pushpad, causes the pushpad and latch to remain retraced (unlocked) providing push-pull door operation. When de-enegrized or signaled by a fire alarm, the pushpad and latch are released.

Voltage: 170/100 mA @ 12/24VDC

Monitoring Available: Latch status and REX output available

electric dogging

MARKS # DESCRIPTIONHEAVY DUTYM9900DG Electric Dogging, Fail SecureM9900DGP Electric Dogging, Fail Secure w 602 Power Supply

delayed egreSS


DE Wall mount delayed egress controller with keypad and electrified exit device, M9900Example: M9900F/32D-DEDEK Keypad controller with redundant key switch capable of all keypad control features602RF 1 Amp power supply• User PIN codes may be assigned to 1, 2 or all control functions. Reset, sustained bypass and momentary bypass (RES)• Audible alarm voice release time, warning or safety message• Visual display countdown, locked/unlocked, egress executed• 15 or 30 second exit delay, 1 or 2 second nuisance delay 2 minutesMonitoring Available: Latch status available

MARKS # DESCRIPTIONHEAVY DUTYM9900DE Delayed EgressM9900KDE Delayed Egress w KeyswitchM9900DEP Delayed Egress w 602 Power SupplyM9900KDEP Delayed Egress w Keyswitch W 602 Power SupplyM9900VRDE Delayed EgressM9900VRKDE Delayed Egress w KeyswitchM9900VRDEP Delayed Egress w 602 Power SupplyM9900VRKDEP Delayed Egress w Keyswitch W 602 Power Supply


HI-SEC

UR

ITY™ C

ylinders & Security-M

ate™ C

ylinders

37

hI-SEcuRIty™ cyLINdERShI-SEcuRIty™ cyLINdERS & SEcuRIty-MAtE™ cyLINdERS

wHat Makes Marks HI-securIty™ cylInders unIQue? Marks USA patented HI-SECURITY™ cylinders offer a secondary mechanical locking mechanism that creates resistance to bump and picking attacks. In addition, the design supports a corresponding configuration on the key blank called a “security wave” (shown below) that supports prevention of unauthorized duplication of keys. The locking principal is adaptable to standard cylinders and large and small format interchangeable cores. Marks USA HI-SECURITY keyways and security waves are of proprietary origination. The distribution of key blanks is factory controlled. Multiple keyways and security codes are available.Assignment is by geographic or customer category type. The Marks USA HI-SECURITY pick and bump resistance features are designed with added security in mind for cylinders, cores and key blanks. In addition, patents provide legal protection for patent infringement against those who attempt to produce or manufacture key blanks or cylinders. Marks USA will aggressively defend its patent rights!

cylInder confIGuratIonMarks HI-SECURITY cylinders are manufactured of brass bar stock. Cylinders are available in a variety of models. In standard construction, there are 1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”, and 1-3/4” mortise cylinders. There are a variety of 1” and 1-1/8” combination mortise/rim cylinders, key-in-knob, large format interchangeable specifically for Medeco®, Schlage® locks and Best® type small format interchangeable core models in 6 and 7 pin lengths. Standard and large format cylinders may be ordered with the UL 437HI-SECURITY option for greater drill resistance, Non-UL with the same pick and bump protection and in Security-Mate(A standard pin tumbler only cylinder without HI-SECURITY features, but matching the same key blank; shown on page 26).SFIC is currently available in Non-UL model only at this time. There are a variety of keying options available. “Zero-bitted” cylinders are shipped standard with either a factory default security code or are supplied with a specific customer security code. The common pin tumbler section of the cylinder has springs, driver pins and accommodates a key blank cut to zero in all positions.


HI-S

ECU

RIT

Y™ C

ylin

ders

& S

ecur

ity-M

ate™

Cyl

inde

rs

38


saMe keyway usedIn botH cylInders!

Marks HI-securIty™cylInder

Marks securIty-Mate™cylInder

Marks securIty-Mate™ cylInders Marks USA Security-Mate Cylinders are intended to complement Marks HI-SECURITY Cylinder applications. Cylinders may be integrated into a Marks HI-SECURITY key system. Driven by dealer and consumer demand for a more economic cylinder solution for interior doors such as closets, where less security is needed but the convenience of carrying a single key is desired, Security-Mate isa natural addition to the product line. Security-Mate Cylinders are made of quality bar brass with precision tolerances, made in five or six pin configuration and available in Mortise, Mortise-rim Combo and Key-in-Knob cylinder configurations. Only Marks patentedHI-SECURITY keys will operate the Security-Mate Cylinder.

Marks usa HI-securIty key control ManaGeMent PackaGe1. A Unique Registered, Securely Designed Scalable System: A custom security solution is defined after careful consideration of your people, operational and safety requirements. A quality system plan allows for expansion, eliminating obsolescence and costly replacement as much as possible.

2. A “Standard” Written Key Control Policy: Once you have a registered system, implementation is a critical key to maintaining a secure system. We highly recommend a standard template. We also recommend you issue the Company Key Control Policy when you issue new keys to every employee.

3. Documented Patented Key Control Technology: Patented lock and key technology is assurance your investment will provide the highest rate of return. Patents protect you from unauthorized key duplication by preventing the manufacturing of key blanks. BEWARE: “DO NOT DUPLICATE” OR SIMILAR WARNING STAMPED ON A KEY IS SIMPLY NOT ENOUGH PROTECTION!

4. Record keeping & Capability of Audit: Each registered system cut key must have unique identification stamped on the bow, (numbers, letters or symbols). In your “Key Log”, record each key holder with the unique identification number found on the key. Each employee should sign for the key issued with the date noted for the record. Every key is identified as to each cylinder it will operate. This knowledge eliminates risk and when keys are found, it is easy to identify the key holder.

5. Process for Retrieving Keys When People Leave the Business: Accounting for all the keys in the system eliminates the need and cost to re-key. By having people sign for the key when issued, and sign out upon return of the key, you are able to take inventory of all cut and assigned keys and assess risk…If you can account for all of the keys in the system, you simply re-issue an existing key number to a new user.

Key Control Management Package Available:

All the documents you need to set up and manage your HI-SECURITY Key System!


HI-SEC

UR

ITY™ C


ate™ C

ylinders

39


There is a special holding fixture that makes assembly of key-in-knob cylinders easier.Insert plug into the fixture, rotate plug to the “bottoms up” position, then begin insertingsecurity finger pins. Insert pins by color code, sizes 1 through 4, then insert key (note thereis not a shear line so pins will appear to be below the plug surface). Security finger pins are“position pins”. Insert two springs, and sidebar…if the sidebar depresses allowing rotation ofthe plug, you are ready to rotate the plug 180° and load the traditional pin tumblers. Driver Pinsmay include mushroom and or hardened steel designs, however they are not necessary foroperation, but enhance attempts to pick and bump.

Plug with INCORRECT alignment (A visual test)

Standard key cutting equipment for either originating a new key by code orduplicating an existing key may be used. An HPC Code Card (HSC387) isavailable. In addition technical data for cutting keys on ITL, Framon, etc. isalso available. Soon a Pro-Lock Blue Punch will be made available. Standardcylinder keys are measured from the shoulder stop. From the shoulder to thecenter of the first cut the measurement is .246 and .0156 from 1-2, 2-3, 3-4,4-5, 5-6.

# HSC387

Medeco® Large Format IC Core Schlage® Large Format IC CoreMarks USA Key-In-Knob CylinderMarks Mortise & Mortise/Rim Combo Cylinder

Plug with key, security finger pins and sidebar assembled. Insert loaded plug into the housing.You can either preload the housing using a following tool or remove the individual threadedretainer screws and load the bottom pins, drivers and springs from the top, the final step,inserting and tightening the individual threaded allen-wrench driven retainer screws.NOTE: Use a 5 Pin key blank for 1” Mortise cylinder and use a 6 Pin key blank for1-1/8” Mortise cylinder and up .

Insert pins from bottom of plug

Plug with CORRECT alignment (A visual test)

servIce eQuIPMent Standard pin kits for standard cylinder construction are used, however Marks USA does make available specialty pins such as mushroom and hardened steel pins to add security. The plug size is the industry standard .050.

These four cylinders will key up with standard pin tumblers

Key Depths Bottom Pins Spacing 0 = .335 0 = .165 1 = .246 1 = .320 1 = .180 2 = .402 2 = .305 2 = .195 3 = .558 3 = .290 3 = .210 4 = .714 4 = .275 4 = .225 5 = .870 5 = .260 5 = .240 6 = 1.026 6 = .245 6 = .255 7 = .230 7 = .270 8 = .215 8 = .285 9 = .200 9 = .300


HI-S

ECU

RIT

Y™ C

ylin

ders

& S

ecur

ity-M

ate™

Cyl

inde

rs

40


EXPLODED VIEWMarks USA Small FormatInterchangeable Core (SFIC):

The cylinder plug within the SFICcontains four security finger pins.These non-spring loaded security fingerpins along with random mushroom top pinsmake the Marks USA HI-SECURITY™ Cylindervirtually pick, drill and bump resistant.

Small Format Interchangeable Core (SFIC)

SIDEBAR & SECURITY FINGER PINS

Sidebar & Security Finger Pin CautionsSFIC cores are equipped with four security finger pinsdue to the presence of the sidebar mechanism.Disassembly of the SFIC core is not recommended.If for some reason disassembly must be done, thereare several cautions…First, the Security finger pinswill fall out if the key is not inserted. Second, thesidebar and springs will fall out if not held in place.Third, the sidebar can be rotated, like the hands of aclock from right to left, but do not reverse thesidebar…the sidebar is tapered on one side andflat on the other…if you reverse the sidebar, withflat side out, you lose the core, it locks in place.

There are two springs that push outwardly against the security sidebar. Once the plug is removed from the shell, use caution as thesidebar and springs are free to fall from the plug. Here are the most important factors to consider if removing the plug from its shell:

1. The four sidebar security finger pins are held in place ONLY if the key is in the plug. If the key is removed when the plug has also been removed, the security finger pins will fall out from the bottom of the plug. Replacement and realignment may be done visually.

Security Finger Pin Replacement ProcedureIf the security finger pins fall out of the plug, you can reinsert them. Keeping in mind that each pin has a specific location, replace thefirst security finger pin (your choice) and insert key. Make sure visually that the “open space” is visible in the sidebar area when thekey is inserted. If a horizontal bar appears anywhere in the sidebar space, that particular security finger pin belongs in one of the otherpositions. Remove the key and let the security finger pin fall out the bottom, being ready to catch it. Continue placing that pin in anotherslot until the security wave of the key matches the security finger pin. Continue this process until the four pins align so the sidebar canbe retracted. This should take a minimal amount of time. 2. The sidebar and its two springs will fall out if they are not held in place with the thumb and/or fingers. 3. CAUTION: The sidebar can be rotated (like the hands of a clock) 180° with no adverse effect. However, it CANNOT be flipped 180°degrees (away from you). If this is done, when the plug is reassembled, the core will remain in a permanent locked position and the plug cannot be removed. Thus, the core will have to be discarded as it will remain inoperable and can no longer be used. The reason is the tapered end is designed to rotate within the cylinder housing as it adapts to the circular contour. The squared edge that fits securely inside the slot of the security finger pin is not conducive to the same motion!


HI-SEC

UR

ITY™ C


ate™ C

ylinders

41


Adjusted security finger pin arrangement in the 6 pin core to allow the 7 pin Marks USA HI-SECURITY Key to operate it(same keyway) x = Empty Position

7 pin Marks USAHI-SECURITY Cylinder

1 2 3 4 5 6 7

1 3 1 2 KeywayEntrance

6 pin Marks USAHI-SECURITY Cylinder

1 2 3 4 5 6

1 3 1 2 KeywayEntrance

x 1 3 1 Sidebar andSecurity Finger Pins

OPERATION & HARDWARE INSTALLATIONThe Marks USA HI-SECURITY SFIC operates similarly to that of any standard small format core. Installing the Marks USA HI-SECURITYSFIC into existing other manufacturer SFIC hardware, the following two exceptions should be noted: • When installing the Marks USA HI-SECURITY SFIC into an existing mortise housing, the left throw pin must be sheared in order to accommodate the security sidebar. This can be easily accomplished with the Shear Tool (# HSICT) available from Marks USA.

Key Control AlternativeUsing a 7 pin Marks USA HI-SECURITY SFIC in a 6 pin Marks USA HI-SECURITY SFIC (same keyway)

ANOTHER KEY CONTROL OPTIONThe Marks USA HI-SECURITY™ SFIC provides another keying advantage with its sidebar technology. Since a 7 pin key can be used toaccess both 7 pin and 6 pin cores of the same keyway, an alternative method of key control can be utilized. With minor shifting of thesecurity finger pin arrangement (and discarding the security finger pin to the far right), 6 pin cores can be coordinated to work in conjunctionwith a 7 pin Marks key. Within a 6 pin core, a 7 pin key, with the example security wave of 1312 can operate the 6 pin core with securityfinger pin modifications. Because the 7 pin key will not be able to be fully inserted into a 6 pin core (of the same keyway), only the first threesecurity finger pins will be used to operate the core - in this example it is 131. However, the security finger pins must be shifted in orderfrom left to right within the plug to the following pattern: x131 (the x represents an empty security finger pin position).

COMPATIBILITYThe Marks USA HI-SECURITY Core can be used similarly as with any other SFIC withone exception: When using the Marks USA HI-SECURITY SFIC core in a pre-existing ICmortise housing, one of the two throw pins must be sheared in order to accommodate thesecurity sidebar . This is the throw pin that aligns with the security sidebar. The Shear Tool caneasily accomplish this task. It has been carefully designed to remove a small piece of the throwpin so that the core will fit properly into its mortise housing. This tool can be utilized wheninstalling a 6 or 7 pin Marks USA HI-SECURITY core into its respective housing. The sheartool is quick and easy to use. Insert the brass “figure 8” drill guide into the cylinder housingcavity, tighten the allen head screw to secure one leg of the throw member to eliminatechattering, then insert drill cut through to stop. Loosen allen screw and remove. Insert SFIC.

Shear Tool#HSICT

• When installing the Marks USA HI-SECURITY™ SFIC into a leverset, use the correct Marks tailpiece that matches the pin configuration of the core (6 pin or 7 pin). • Kits available for HI-SECURITY IC Core Tailpieces: HR1984-HS for use with Marks Functions AB, B, DA (ext.), DW, F, FEU & FEL. HR1984S-HS for use with Marks Functions S, DA (int.), DB, DC, SB, T & TS. (See grid on page 9) NOTE: One of the two throw pins must be sheared in order to accommodate the security sidebar . See the above illustrations .


HI-S

ECU

RIT

Y™ C

ylin

ders

& S

ecur

ity-M

ate™

Cyl

inde

rs

42

hI-SEcuRIty™ cyLINdERShI-SEcuRIty cyLINdERS & SEcuRIty-MAtE™ cyLINdERS

KEY SPECIFICATIONS

KEY BLANK OVERVIEW

Key Blank Orientation: It is generally accepted that SFIC key blanks are originated and gauged from the tip stop. This is true with Marks HI-SECURITY!

Originating/Duplicating Marks USA HI-SECURITY Keys: Keys can be originated on standard key code cutting equipment. In addition, keys can be duplicated on any standard key duplicating machine. There exists an HPC card for those using HPC code card machines. The DSD for the HPC Blue Shark can be entered manually, using the Shoulder Stop reference. Since the security waves are factory controlled, the top bitting is all that is necessary to duplicate or originate keys.

Marks USA HI-SECURITY™ SFIC Key Spacing & Depth Specifications

A2 Pin Increment = .0125”Pin Stack Total = .397”Coded Stack Length = 23Spacing of Cuts = .150” Root of Cut = .054”Angle of Cut = 90°Pin Diameter = .108”

.3187 .1100 . . . . . . . . . . . . . . 0 .3062 .1225 . . . . . . . . . . . . . . 1 .2937 .1350 . . . . . . . . . . . . . . 2 .2812 .1475 . . . . . . . . . . . . . . 3 .2687 .1600 . . . . . . . . . . . . . . 4 .2562 .1725 . . . . . . . . . . . . . . 5 .2437 .1850 . . . . . . . . . . . . . . 6 .2312 .1975 . . . . . . . . . . . . . . 7 .2187 .2100 . . . . . . . . . . . . . . 8 .2062 .2225 . . . . . . . . . . . . . . 9

Cut Depth Bottom Pin Code Length

Ordering Key Blanks: Distribution of key blanks is carefully managed by authorized distributors. Within the standard product line, Marks USA HI-SECURITY technology offers over 900 Security Wave configurations for each keyway. Participating HI-SECURITY Wholesale Distributors have access to a common national security wave as well as several unique Dealer or End User based security waves. Any locksmith or institution that meets required quantities may purchase an exclusive Security Wave.

Key System Management: A blank signature card with a random number is provided with each cylinder and may be used to file systems, identify authorized signatures and system registry for future use.

Key Blanks Lengths:There is one key blank available for the Marks USA HI-SECURITY SFIC to accommodate both 6 and 7 pin cores. One note, the Marks USA HI-SECURITY key blank has shoulders on the tip stop key. (shown right)


HI-SEC

UR

ITY™ C


ate™ C

ylinders

43


PIN SPECIFICATIONS:Most SFIC systems follow the A2 System of pin depths created by BEST® Lock Company. It is by far the most common.The A4 System of pin depths is used especially when large numbers of key combinations are required. The A2 and A4 Systems arelisted here. When ordering combinated Marks USA HI-SECURITY™ cores from the factory, the A2 System is standard, and is thefactory default when no pin increment system is specified.

PIN SPECIFICATIONS for the Marks USA HI-SECURITY™ SFIC

Two-Step Master Keying System - .0125” Increments

A2 SFIC Pin Specification Chart Key Bottom Pin Coded Depth Length Number .3187 .1100 . . . . . . . . . . . . . . . . . . . . . 0 .3062 .1225 . . . . . . . . . . . . . . . . . . . . . 1 .2937 .1350 . . . . . . . . . . . . . . . . . . . . . 2 .2812 .1475 . . . . . . . . . . . . . . . . . . . . . 3 .2687 .1600 . . . . . . . . . . . . . . . . . . . . . 4 .2562 .1725 . . . . . . . . . . . . . . . . . . . . . 5 .2437 .1850 . . . . . . . . . . . . . . . . . . . . . 6 .2312 .1975 . . . . . . . . . . . . . . . . . . . . . 7 .2187 .2100 . . . . . . . . . . . . . . . . . . . . . 8 .2062 .2225 . . . . . . . . . . . . . . . . . . . . . 9

Pin Stack Total: = .397Coded Stack Length: 23Cut: TIP to BOWDecoding: Subtract; 13 minus Code of Top PinMultiplier: Top Pin Length x 80 = Coded Length (rounded)Root of Cut: .054 Angle of Cut: 90° Pin Diameter: .108Spacing (TIP to BOW from center of cut): From Tip Stop, each cut:#1 = .088 #2 = .238 #3 = .388 #4 = .538 #5 = .688 #6 = .838 #7 = .988

A4 SFIC Pin Specification ChartTwo-Step Master Keying System - .0121” Increments

Pin Stack Total: = .404 Coded Stack Length: 14 Cut: TIP to BOWDecoding: Subtract; 8 minus Code of Top PinMultiplier: Top Pin Length x 48 = Coded Length (rounded)Root of Cut: .054Angle of Cut: 90°Pin Diameter: .108Spacing (TIP to BOW from center of cut): From Tip Stop, each cut:#1 = .088 #2 = .238 #3 = .388 #4 = .538 #5 = .688 #6 = .838 #7 = .988

.021 1 .042 2 .063 3 .084 4 .105 5 .126 6 .147 7 .168 8 .189 9 .210 10 .231 11

.318 .110 0 .297 .131 1 .276 .152 2 .255 .173 3 .234 .194 4 .213 .215 5

Key Bottom Pin Coded Depth Length Number

Wafer Pin Coded Length Number

A2 SFIC Pin Specification ChartTwo-Step Master Keying System - .0125” Increments

Wafer Pin Coded Wafer Pin Coded Length Number Length Number.0250.........................2 .1375 . . . . . . . . . . . 11.0375.........................3 .1500 . . . . . . . . . . . 12.0500.........................4 .1625 . . . . . . . . . . . 13.0625.........................5 .1750 . . . . . . . . . . . 14.0750.........................6 .1875 . . . . . . . . . . . 15.0875.........................7 .2000 . . . . . . . . . . . 16.1000.........................8 .2125 . . . . . . . . . . . 17.1125.........................9 .2250 . . . . . . . . . . . 18.1250........................10 .2375 . . . . . . . . . . . 19

COMBINATING & CAPPING PROCEDURESCombinating (Pinning) the Marks USA HI-SECURITY SFIC is no different than other small format cores. It is assumed that you havethe bitting lists and pin segments for each chamber of every core. If you do not, you must secure this information or construct a systemvia mathematical calculations, slide charts, computer software or another appropriate source.

The basic combinating procedure is as follows: 1. Use your Ejector Pin (or Downie Pin) and line up the shear lines in the empty core. Keep the aligning tool in place in the last chamber. 2. Insert the Bottom Pin in Chamber #1 after placing core loading block or on suitable device. 3. Insert the Master Pin or Control Pin next, depending on the keying structure. If the next pin is a small wafer, hold the core in your hand and tilt slightly to the side, watching the pin as it is placed so that it does not fall into the hole and turn sideways. 4. Insert the Top Pin. 5. Check that each pin has fallen to its lowest level in the chamber and is situated flat. Use Ejector tool to push down to even out the stack. 6. It is recommended you test each core with all keys or with finger atop chambers with springs inserted. 7. Place core into holder and secure each individual chamber with allen screws as seen in the image below.


HI-S

ECU

RIT

Y™ C

ylin

ders

& S

ecur

ity-M

ate™

Cyl

inde

rs

44


MORTISE CYLINDER CAMS

PART # DESCRIPTION

2101HS Straight Cam

2102HS Clover Cam

2103HS G - Cam

2104HS Adams Rite Cam

2105HS J - Cam

Schlage® LARGE FORMATIC CORE HOUSING CAMS

PART # DESCRIPTION

R2101-C Straight Cam

R2102-C Clover Cam

R2103-C G - Cam

R2104-C Adams Rite Cam

R2105-C J - Cam

CYLINDRICAL IC CORE TAIL PIECES

PART # FUNCTIONS

HR1984-HS AB, B, DA (ext.),DW, F, FEU, FEL

HR1984S-HS S, DA (int.), DB,DC, SB, T, TS

CYLINDRICAL TAIL PIECES

PART # FUNCTIONS

F1903-C AB, B, DA (ext.), DW, F, FEU & FEL

F1903S-C S, DA (int.), DB, DC, SB, T, TS

MARKS USA HI-SECURITY™ CAMS & TAILPIECES

MARKS USA HI-SECURITY RETRO-FIT Key-In-Knob TailpiecesThe Marks USA HI-SECURITY Key-In-Knob Cylinder is assembled with the standard Marks tailpiece F1903-C as seen in thebelow photo.


HI-SEC

UR

ITY™ C


ate™ C

ylinders

45


The NEW Marks USA HI-SECURITY RETRO-FIT Key-In-Knob Tailpiece Kit # K1103 is used with Marks USA HI-SECURITYKey-In-Knob Cylinders, thus enabling retrofit to a variety of key-in-knob or deadbolt lock cylinders using the screw cap retainer. The spacer creates appropriate space for replacement tailpieces to fit securely and operate smoothly when the cylinder is fully assembled.

MARKS USA HI-SECURITY™ RETRO-FIT Key-In-Knob Tailpieces (cont’d.)

Tailpieces used with the Marks USA HI-SECURITYKey-In-Knob Cylinders for key-in-knob or key-in-lever locksetsinclude the F1903-C for Marks AB, B, DA (ext.), DW, F, FEU & FELfunctions; The F1903S-C for Marks S, DA (int.), DB, DC, SB, T &TS functions.The three new tailpieces (shown right) retrofit a variety of otherlocksets. Spacer 1360-F19 is included as well providing for smooth operation and secure fastening when accommodating replacement tailpieces.

Marks USA original tailpieces (shown left) for use with the10, 70, 80 & 95 Lines are constructed as a single piece,unlike many replacements that are two pieces.

365 Bayview Ave. • Amityville, NY • 11701 • 800-645-9445 • Fax: [email protected] • www.marksusa.com

www.designalock.com • www.SAVISchool.com

Marks USA is a Division of NAPCO Security Technologies, Inc. • NAPCO • Alarm Lock • Continental Access • Marks USAArchiTech, LifeSaver, Survivor, Hi-Security, iQwik, X-it, LocDown, Trilogy and Networx are trademarks of NAPCO Security. Other trademarks listed are properties of their respective companies.

©Marks USA, 2020 A677C (12.19)

*Lifetime Mechanical Limited Warranty: MARKS USA warrants that its products are free from defects in materials and workmanship. This warranty is limited to the lifetime of the door on which our lock is installed. In the event our product does not conform to this warranty, MARKS USA will repair or replace the product free of charge. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-MARKS products or parts. We reserve the right to make changes in materials, components or manufacturing methods.

Liability under all warranties expressed or implied is limited to replacement of the defective goods. This warranty does not cover nor provide for the reimbursement or payment of incidental or consequential damages. Additionally, the company will not warrant ANSI A156.2 Grade 2 lever product installed in educational facilities and student housing.

2-Year Electronic Limited Warranty: MARKS USA warrants to the original purchaser that its products are free from defects in materials and workmanship so long as they occupy the premises In the event our product does not conform to this warranty, MARKS USA will repair or replace the product free of charge at its sole discretion. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, improper application or specification, ordinary wear and tear, misuse, abuse, accident, improper voltage, unauthorized service, or use with unauthorized non-MARKS products or parts. We reserve the right to make changes in materials, components or manufacturing methods. Liability under all warranties expressed or implied is limited to replacement of the defective goods. This warranty does not cover nor provide for the reimbursement or payment of incidental or consequential damages or any shipping charges related to exercising of this warranty.

Lifetime Finish Limited Warranty: MARKS USA finishes with the suffix “E” indicate finishes which have a “PVD” coating. Locksets with the “3E” finish will be warranted to the original user against tarnishing as long as the user occupies the residential premises upon which the lockset was originally installed. Locksets with this finish, used in commercial applications will be limited to two years. This warranty does not cover scratches, abrasion, abused or misused products. Upon return of a defective product to Marks USA, we will, at our sole discretion, either replace the product or refund the purchase price in exchange for the product. Due to climatic conditions, chemical or abrasive actions, other finishes are excluded from this warranty. This warranty does not cover nor provide for the reimbursement or payment of incidental or consequential damages arising from the sale of the product.

Marks USA Antimicrobial Finish - Peace of mind for your hardware application when protected against Germs and Mold using Stericoat AM. This Marks USA antimicrobial finish is recommended for hospitals, assisted living facilities, schools and childcare facilities. Use code “AM” when ordering product with antimicrobial finish.

Locking Solutions:Security & Value for a Lifetime · nova serIes 5 & 55 MortIse locksets Our Nova...

Documents

Transcript of Locking Solutions:Security & Value for a Lifetime · nova serIes 5 & 55 MortIse locksets Our Nova...