ORGANIZING A SCHOOL LOCKER. What do dirty/unorganized lockers lead to?...
Lockers - Leda Security Products · lockers, what security should be provided and what the cyclist...
Transcript of Lockers - Leda Security Products · lockers, what security should be provided and what the cyclist...
![Page 1: Lockers - Leda Security Products · lockers, what security should be provided and what the cyclist needs to provide. Additionally, Securabike can advise on what service and maintenance](https://reader034.fdocuments.in/reader034/viewer/2022042321/5f0ae18e7e708231d42dcccf/html5/thumbnails/1.jpg)
88 securabike.com.au Edition 8 - June 2016
1300 780 450
Fully enclosed galvanised steel lockers provide the highest level of security (Class 1) to AS2890.3. While they are the most popular secure parking for cyclists, they are the most expensive bike parking option.
Securabike’s BSL and BVL lockers are in wide use in various state and metropolitan rail networks, making them a widely-specified and used locker.
Securabike bicycle lockers are available in both horizontal and vertical models and are manufactured from 1.6mm galvanised sheeting for maximum durability and corrosive resistance (BSL18S and BSL18D). They can also be powder coated in a range of colours. Some models are now available in stainless steel (grade 316) to cater for locations near the seafront where corrosion is a concern.
Horizontal lockers have been designed as a demountable unit and are supplied either as a flat pack or pre-assembled. Flat packs offer substantial freight savings, particularly if being transported to regional or interstate locations.
They are supplied in single or the more popular and cost-effective double locker.
Vertical lockers can be manufactured demountable or flatpack in 2, 3 or 4 locker modules which are constructed around a steel frame providing robust, high vandal-resistant security.
Advantages• Provide the highest level of security – Class 1• Modular system tailored to suit application• Single, double or vertical configuration• Protects bicycle from weather• Bicycle is hidden from view• Surveillance not normally required• Best suited for long term parking• Individual locking with master keying system
Applications• Railway stations and bus interchanges• Park and ride terminals• Workplaces• University and college campuses• Apartments
Note – All Leda bicycle lockers comply with AS2890.3.
Lockers
![Page 2: Lockers - Leda Security Products · lockers, what security should be provided and what the cyclist needs to provide. Additionally, Securabike can advise on what service and maintenance](https://reader034.fdocuments.in/reader034/viewer/2022042321/5f0ae18e7e708231d42dcccf/html5/thumbnails/2.jpg)
P r o d u c tR a n g e
89
1300 780 450
securabike.com.au
Introduction 1
Bicycle Facts 4
Design Guide 6
Installation 12
Consulting 13
Security Classes 14
Product Selection 15
PRODUCT RANGE
Rails 17
Racks 31
Repair Stations 63
End-of-Journey 68
Cages 84
Lockers 88
Shelters 98
Scooters Racks 107
Other Products 112
Clothes Lockers 116
Signage 122
Standards 128
Packaging 129
Index 130
L o c k e r s
Management Plan
Securabike’s many years’ experience in supplying and maintaining bicycle lockers has highlighted the need to develop a management plan to ensure the best possible utilisation of the lockers, what security should be provided and what the cyclist needs to provide. Additionally, Securabike can advise on what service and maintenance needs are required to maximise the life expectancy of the lockers.
Finish
Lockers are supplied standard in a galvanised steel finish. Powder coating, in a range of colours, is available at extra cost. See the range of colours on page 128
Standard lockers are supplied with a basic key- operated 3-way locking system suitable for small quantities or where security is not a major issue. Securabike recommends that ‘hasp and staple’ locking be added where access and security is provided by the cyclist.
Recommended options
HSLHasp and staple – allows the cyclist to use their own U locks or padlock
VRTHVandal-resistant T handle – spring-loaded handle locates flush when not being used, to minimise vandalism
MKLMaster keying – recommended for multiple locker installations to provide improved locker management and security
MHHMetal hanging hooks – for helmets and apparel
LVP1Ventilation panels – provides air movement and also allows inspection to ensure lockers are in use, and being used correctly
Electronic Locking System
Securabike has developed an electronic locking system for its range of lockers, cages and compounds. The system is designed to provide greater utilisation of the lockers while increasing security and minimising management costs.
![Page 3: Lockers - Leda Security Products · lockers, what security should be provided and what the cyclist needs to provide. Additionally, Securabike can advise on what service and maintenance](https://reader034.fdocuments.in/reader034/viewer/2022042321/5f0ae18e7e708231d42dcccf/html5/thumbnails/3.jpg)
P r o d u c tR a n g e
90 securabike.com.au Edition 8 - June 2016
1300 780 450
L o c k e r s
Optional Precast Concrete Slab900 x 600 x 75mm
Shown cut-awayfor clarity
Can be secured by padlock or cyclist’s U lock
PVC cushionprotects bicycle paintwork
Lid secured by padlockthrough locking pin.
Undercover - vandal resistantand weather protected
End View300
Security and Storage.Provides excellent security by allowing
both wheels and the bicycle frame to be secured.Additionally, it allows the cyclist to store
riding apparel such as backpack, helmet and gloves.
Optional precast concrete slab is availablefor where the locker is not being installed
onto an existing concrete slab.
BLB632Mini Locker
680
596
Front View250
Optionalstencil signage
Material Specifications (General)BLB632 1.6mm Galvabond® sheet / Powder coated Heritage Green / Stainless steel wire cables (PVC coated)
![Page 4: Lockers - Leda Security Products · lockers, what security should be provided and what the cyclist needs to provide. Additionally, Securabike can advise on what service and maintenance](https://reader034.fdocuments.in/reader034/viewer/2022042321/5f0ae18e7e708231d42dcccf/html5/thumbnails/4.jpg)
P r o d u c tR a n g e
91
1300 780 450
securabike.com.au
Galvanised sheet cladding
Three point secure locking
Economy RangeTBL18S
Material Speci�cations (General)TBL18S 25 x 25mm RHS steel frame 0.8mm galvanised metal sheetFinish Galvanised or powder coated in a range of colours
1200
2400
2450
TBL18SPlan View
Front View700
Front ViewStackable
Optional (TBL RAMP) wheel ramp Optional stencil signage
650Clear Door Opening
Hasp and staplefor cyclists to provide
their own padlock.
Securabike’s most cost e�ective bicycle locker. This design is supplied in knock down kit form. It uses a tubular steel frame that clips together. The door and cladding are then attached by pop rivets. Quick and easy to assemble and install.
L o c k e r s
SUITABLE FOR STACKING
TWO HIGH
![Page 5: Lockers - Leda Security Products · lockers, what security should be provided and what the cyclist needs to provide. Additionally, Securabike can advise on what service and maintenance](https://reader034.fdocuments.in/reader034/viewer/2022042321/5f0ae18e7e708231d42dcccf/html5/thumbnails/5.jpg)
P r o d u c tR a n g e
92 securabike.com.au Edition 8 - June 2016
1300 780 450
L o c k e r s
Material Specifications (General)Material 1.6mm Galvabond® sheetInclusions Reinforced door & roof stiffeners, wheel rail, pull-out channel on 2 storey lockers. Clothes / helmet hooks, 3-way locking, security camera accessFinish Galvanised or powder coated in a range of colours
BSL18SHorizontal
Optional spring-loaded T handle provides improved vandal resistance
and allows master keying
Three point secure locking
10mm holefor scope camera
Creased roof panel to provide strength and fall for water run-off
(stiffener channel underneath)
Single lockerwith horizontal storage
Ideal where onlysingle-sided access is available
1270
1850
Front View795
Side View1850
Plan View
1500Access
Corridor
Optionalstencil signage
![Page 6: Lockers - Leda Security Products · lockers, what security should be provided and what the cyclist needs to provide. Additionally, Securabike can advise on what service and maintenance](https://reader034.fdocuments.in/reader034/viewer/2022042321/5f0ae18e7e708231d42dcccf/html5/thumbnails/6.jpg)
P r o d u c tR a n g e
93
1300 780 450
securabike.com.au
BSL18DGalvabond®
SBSL18DStainless Steel
Front View2 Storey Arrangement
1070mm
Optional (TBL ramp) wheel rampor
Securabike’s unique gas strut power assist system.
Suitable for stackingtwo high
Optional spring-loaded T handle provides improved vandal resistance
and allows master keying
Three point secure locking
Optional stencil signage
Optional ventilation panel
10mm holefor scope camera
Requires access and maneuverabilityat both ends of the locker
Creased roof panel to provide strength and fall for water run-off
(stiffener channel underneath)
The double bike lockeris Securabike’s most
popular model
1270mm
2540mm
Front View1070mm
Plan View
AccessCorridor
AccessCorridor
1850mm
1500mm
1500mm
BSL18DHorizontal
Material Specifications (General)Material 1.6mm Galvabond® sheet / Powder coated in a range of coloursInclusions Reinforced door & roof stiffeners, clothes / helmet hooks, 3-way locking, security camera accessFinish Galvansied steel or powder coated in a range of colours
L o c k e r s
MOST POPULAR
MODEL
![Page 7: Lockers - Leda Security Products · lockers, what security should be provided and what the cyclist needs to provide. Additionally, Securabike can advise on what service and maintenance](https://reader034.fdocuments.in/reader034/viewer/2022042321/5f0ae18e7e708231d42dcccf/html5/thumbnails/7.jpg)
P r o d u c tR a n g e
94 securabike.com.au Edition 8 - June 2016
1300 780 450
L o c k e r s
Material Specifications (General)Material 0.8mm metal sheet Inclusions Reinforced door & roof stiffeners, wheel rail Clothes / helmet hooks, 3-way locking, security camera accessFinish Galvanised or powder coated in a range of colours
Plan View
Semi Vertical storagefor 1, 2 or 3 bicycles
Sturdy vandal proof lockers incorporate a tubular steel frame
and are clad with Galvabond sheeting. They can be supplied
in flat pack form ready for assembly and riveting on site
or in 2, 3 or more modular units fully assembled
around a steel frame
Corrugated roof is designed at an angle to shed ice and snow and will offer resistance against ice dams.
Roof structural supports contribute towards withstanding impact from falling objects such as hail and falling branches
BVL1 / 2 / 3Semi Vertical
Sloping roof panelfor water run-off.
Stiffener channel under.
10mm holefor scope camera
Optional T handle provides improved vandal resistance
and allows master keying
Optional stencil signage
Corrugated roof
2390
1700
1500
BVL 32207
BVL 21482
BVL 1757
AccessCorridor
1775
Side View1650
BVLIFront
Clear Door Opening
View770
690
BVLI
1837
Three point secure locking
![Page 8: Lockers - Leda Security Products · lockers, what security should be provided and what the cyclist needs to provide. Additionally, Securabike can advise on what service and maintenance](https://reader034.fdocuments.in/reader034/viewer/2022042321/5f0ae18e7e708231d42dcccf/html5/thumbnails/8.jpg)
P r o d u c tR a n g e
95
1300 780 450
securabike.com.au
1300 780 450
L o c k e r s
Material Specifications (General)Material 0.8mm metal sheet Inclusions Reinforced door & roof stiffeners, wheel rail Clothes / helmet hooks, 3-way lockingFinish Galvanised or powder coated in a range of colours
BVLH1Vertical Locker
1270
1960
1500
770 1274
1944
Front View
Plan View
Side View
Optional T handle provides improved vandal resistance
and allows master keying
Three point secure locking
Optional stencil signage
Creased roof panel to provide strength and fall for water run-off(stiffener channel under roof panel)
690
Clear Door Opening
This vertical bicycle locker featuresthe smallest footprint of all bicyclelockers and is best suited for sites
requiring the highest degree of storagedensity. The bicycle is suspended on aninternal wheel hook with two additionalhooks that can be used for helmets or
clothing.
A sturdy internal frame with galvanised sheeting is further strengthened through
the use of steel corner brackets. Thislocker features a cast metal handleoperating a 3-point locking system
(keyed to differ) as standard. A selectedrange of alternative locking options
available upon request.
![Page 9: Lockers - Leda Security Products · lockers, what security should be provided and what the cyclist needs to provide. Additionally, Securabike can advise on what service and maintenance](https://reader034.fdocuments.in/reader034/viewer/2022042321/5f0ae18e7e708231d42dcccf/html5/thumbnails/9.jpg)
96 securabike.com.au Edition 8 - June 2016
P r o d u c tR a n g e
1300 780 450
L o c k e r s
BSL202
Single capacitydouble height
Ideal where only single-sidedaccess is available
The top locker incorporates ourCBR2GS gas strut assist rail system.Simply pull out the sliding base railuntil it reaches its pivot point and
pull down to allow easy positioningof the bicycle.
Material Specifications (General)Material 0.8mm metal sheet / powder coated in a range of coloursInclusions Reinforced door & roof stiffeners, wheel rail, pull-out channel on 2 storey lockers Clothes / helmet hooks, 3-way locking, security camera access
Optional stencil signage
2840
1570
1270
2100
3000
Front View795
Upper LevelPlan View
Side View2100
Access Required3000
BSL202
BSL18S
AccessRequired
BSEL22 Door Locker
1295
1900
End View795
Plan View
Front View1900
Optionalventilation panel
Optionalstencil signage
ideally suited for apartments / flatsand provide a much higher level of security against theft
Designed to rest against a wall
![Page 10: Lockers - Leda Security Products · lockers, what security should be provided and what the cyclist needs to provide. Additionally, Securabike can advise on what service and maintenance](https://reader034.fdocuments.in/reader034/viewer/2022042321/5f0ae18e7e708231d42dcccf/html5/thumbnails/10.jpg)
97
1300 780 450
securabike.com.au
L o c k e r s
BLHS2High Security
Upgrade
450
1270
Front View1850
Side View1070
Plan View
Locker shield Prevents forced entry with leverage tools.
U-rail security Our BR475B is supplied and installed inside the locker allowing cyclists to use their own locking devices to provide additional security.
T handle Vandal resistant, spring loaded handle locates flush when not in use, minimising possible vandalism
Suitable for use in locations where vandal resistance might be required
Locker shield attached to door
panel
Optional stencil signage
P r o d u c tR a n g e
1300 780 450
Material Specifications (General)Material 1.6mm Galvabond® sheet Inclusions Reinforced door & roof stiffeners, clothes / helmet hooks, 3-way secure locking, security camera accessFinish Galvanised or powder coated in a range of colours
HIGH SECURITY UPGRADE