Locating Pins for Fixtures - my.misumi-ec.com
1
-1691 1 -1692 1 Locating Pins for Fixtures Standard Grade, No Shoulder Locating Pins for Fixtures Tip Shape Selectable, Standard Grade, No Shoulder QFeatures: For Standard Grade, P Dim. Tolerance is 0 -0.05 (for Precision Grade, 0 -0.01 or 0 -0.02), concentricity is 0.03 or 0.05 (for Precision Grade, 0.01 or 0.02). QFeatures: For Standard Grade, P Dim. Tolerance is 0 -0.05 (for Precision Grade, 0 -0.01 or 0 -0.02), concentricity is 0.03 or 0.05 (for Precision Grade, 0.01 or 0.02). QThreaded Type MMaterial HHardness SSurface Treatment R-LNNA Round SCM435 35~40HRC (Surface 750HV ~ ) Hard Chrome Plating R-LNND Diamond D-LNNA Round SKD11 Equivalent 55HRC ~ (Surface 3000HV) Dicoat ® Treated D-LNND Diamond H-LNNA Round SKD11 Equivalent 55HRC ~ (Surface 3000HV) TiCN Treatment H-LNND Diamond Type MMaterial HHardness ELNNA Round SCM435 Hardening 35~40HRC ELNND Diamond TELNNA Round SCM415 Carburized 55HRC~ (depth 0.7 ~ 0.8) / Anti-carburizing on Threads TELNND Diamond Type MMaterial HHardness SELNNA# Round SCM435 Hardening 35~40HRC SELNND# Diamond TSELNNA# Round SCM415 Carburized 55HRC~ (depth 0.7 ~ 0.8) / Anti-carburizing on Threads TSELNND# Diamond Type MMaterial HHardness SSurface Treatment D-SLNNA# Round SKD11 Equivalent 55HRC ~ (Surface 3000HV) Dicoat ® Treated D-SLNND# Diamond Reference:sin15°≈0.259 tan15°≈0.267 E Dicoat ® Treated / TiCN Treated items will have the ( ) precision and Thread Shape will be E1. E e=P/2/tan15°+R-(R/sin15°) EDicoat ® Treated / TiCN Treated items do not come with a center hole. 60° P 0 -0.05 0 -0.05 P 0 -0.1 P-1 W (Round) (Diamond) Ø0.03 (Ø0.05) P A E1 Dicoat ® Treated / TiCN Thread Shape G 6.3 1.6 1.6 3.2 1 L 30° B L 3 Dh7 R 1.6 G e M (Coarse)=D A 3.2 3.2 1 L L B 3 3.2 Dh7 A M (Coarse)=D 3.2 E1 P-1 0 -0.1 60° 0 -0.05 P W (Diamond) P 0 -0.05 (Round) Ø0.03 (Ø0.05) P A B L D d D 3 R 1 1 L h7 h7 30° 1.6 G e L A 3.2 3.2 Ee=P/2/tan15°+R-(R/sin15°) EDicoat ® Treated / TiCN Treated items do not come with a center hole. G 6.3 1.6 1.6 3.2 E Dicoat ® Treated / TiCN Treated items will have the ( ) precision. Reference:sin15°≈0.259 tan15°≈0.267 Type MMaterial HHardness ELNTA Round SCM435 Hardening 35~40HRC ELNTD Diamond TELNTA Round SCM415 Carburized 55HRC~ (depth 0.7 ~ 0.8) / Anti-carburizing on Threads TELNTD Diamond Type MMaterial HHardness SSurface Treatment R-LNTA Round SCM435 35~40HRC (Surface 750HV ~ ) Hard Chrome Plating R-LNTD Diamond D-LNTA Round SKD11 Equivalent 55HRC~ (Surface 3000HV) Dicoat ® Treated D-LNTD Diamond H-LNTA Round SKD11 Equivalent 55HRC~ (Surface 3000HV) TiCN Treatment H-LNTD Diamond Part Number - P - B - L Type D ELNNA 10 - P12.0 - B10 - L8 (Threaded) ELNTA 6 - P10.0 - B15 (Set Screw) Part Number - P - B - L - A - E Type Tip Shape D SELNNA A 16 - P18.0 - B21 - L15 - A60 - E2 (Threaded) SELNTA B 10 - P14.0 - B10 - A60 (Set Screw) XL dimension in ( ) is not applicable to Diamond Shape, Dicoat ® and TiCN treatment. EB Dimension is selectable from 5 mm ~ for Dicoat ® Treated / TiCN Treated Products/Diamond Shape. Part Number P Configurable 0.1mm Increment B Configurable 1mm Increment L Selection L1 R W Unit Price Type Dh7 ELNNA ELNND TELNNA TELNND R-LNNA R-LNND D-LNNA D-LNND H-LNNA H-LNND Hardened (Round) ELNNA (Diamond) ELNND Carburized (Round) TELNNA (Diamond) TELNND Hard Chrome (Round) R-LNNA (Diamond) R-LNND Dicoat (Round) D-LNNA (Diamond) D-LNND TiCN (Round) H-LNNA (Diamond) H-LNND 6 0 -0.012 8.0~12.0 E2~30 5 8 10 6 3 3 - - 8 0 -0.015 10.0~16.0 5 8 10 12 15 10 4 3.5 - - 10 12.0~20.0 (5) (8) 10 12 15 12 4 4 10T 12.0~20.0 (5) (8) 10 12 15 15 5 5 12 0 -0.018 14.0~25.0 (8) 10 12 15 18 15 6 6 16 18.0~32.0 (10) 12 15 18 20 18 8 8 - - - - - - 20 0 -0.021 22.0~35.0 12 15 18 20 22 8 9 - - - - - - EB Dimension is selectable from 5 mm ~ for Dicoat ® Treated / TiCN Treated Products / Diamond Shape. Part Number P Configurable 0.1mm Increment B Configurable 1mm Increment L L1 d R Applicable Set Screw W Unit Price Type Dh7 ELNTA ELNTD TELNTA TELNTD R-LNTA R-LNTD D-LNTA D-LNTD H-LNTA H-LNTD Hardened (Round) ELNTA (Diamond) ELNTD Carburized (Round) TELNTA (Diamond) TELNTD Hard Chrome (Round) R-LNTA (Diamond) R-LNTD Dicoat (Round) D-LNTA (Diamond) D-LNTD TiCN (Round) H-LNTA (Diamond) H-LNTD 6 0 -0.012 8.0~12.0 E2~30 5 8 4 3 M5 3 - - 8 0 -0.015 10.0~16.0 5 8 5 4 M5 3.5 - - 10 12.0~20.0 10 8 7 4 M6 4 10T 12.0~20.0 5 8 7 5 M6 5 12 0 -0.018 14.0~25.0 12 10 9 6 M8 6 16 18.0~32.0 12 10 13 8 M8 8 - - - - - - 20 0 -0.021 22.0~35.0 12 10 17 8 M8 9 - - - - - - XAngle A*30 is not applicable to Tip Shape B. Select from Standard Grade, No Shoulder (P.1691). XL dimension in ( ) is not applicable to Diamond Shape and Dicoat ® treatment. EB Dimension is selectable from 5 mm ~ for Dicoat ® Treated / Diamond Shape. Part Number P Configurable 0.1mm Increment B Configurable 1mm Increment L Selection A Selection E 1mm Increment L1 R W Unit Price Type Tip Shape Dh7 SELNNA# SELNND# TSELNNA# TESLNND# D-SNNA# D-SNND# Hardened (Round) SELNNA (Diamond) SELNND Carburized (Round) TSELNNA (Diamond) TSELNND Dicoat (Round) D-SLNNA (Diamond) D-SLNND A (Tapered) B (Taper R) 6 0 -0.012 8.0~12.0 E2~30 5 8 10 *30 60 90 120 1~10 6 3 3 8 0 -0.015 10.0~16.0 5 8 10 12 15 10 4 3.5 10 12.0~20.0 (5) (8) 10 12 15 12 4 4 10T 12.0~20.0 (5) (8) 10 12 15 15 5 5 12 0 -0.018 14.0~25.0 (8) 10 12 15 18 15 6 6 16 18.0~32.0 (10) 12 15 18 20 18 8 8 - - 20 0 -0.021 22.0~35.0 12 15 18 20 22 8 9 - - XAngle A*30 is not applicable to Tip Shape B. Select from Standard Grade, No Shoulder (P.1691). EB Dimension is selectable from 5 mm ~ for Dicoat ® Treated / Diamond Shape. Part Number P Configurable 0.1mm Increment B Configurable 1mm Increment A Selection E 1mm Increment L L1 d R Applicable Set Screw W Unit Price Type Tip Shape Dh7 SELNTA SELNTD TSELNTA TSELNTD D-SLNTA D-SLNTD Hardened (Round) SELNTA (Diamond) SELNTD Carburized (Round) TSELNTA (Diamond) TSELNTD Dicoat (Round) D-SLNTA (Diamond) D-SLNTD A (Tapered) B (Taper R) 6 0 -0.012 8.0~12.0 E2~30 *30 60 90 120 1~10 5 8 4 3 M5 3 8 0 -0.015 10.0~16.0 5 8 5 4 M5 3.5 10 12.0~20.0 10 8 7 4 M6 4 10T 12.0~20.0 5 8 7 5 M6 5 12 0 -0.018 14.0~25.0 12 10 9 6 M8 6 16 18.0~32.0 12 10 13 8 M8 8 - - 20 0 -0.021 22.0~35.0 12 10 17 8 M8 9 - - Type MMaterial HHardness SSurface Treatment D-SLNTA# Round SKD11 Equivalent 55HRC ~ (Surface 3000HV) Dicoat ® Treated D-SLNTD# Diamond Type MMaterial HHardness SELNTA# Round SCM435 Hardening 35~40HRC SELNTD# Diamond TSELNTA# Round SCM415 Carburized 55HRC~ (depth 0.7 ~ 0.8) / Anti-carburizing on Threads TSELNTD# Diamond Reference: sin15°≈0.259 sin30°=0.5 sin45°≈0.707 sin60°≈0.866 tan15°≈0.267 tan30°=0.577 tan45°=1 tan60°≈1.732 E Dicoat ® Treated items will have the ( ) precision. 0 -0.05 P 0 -0.05 P P-1 0 -0.1 60° W (Round) (Diamond) Ø0.03 (Ø0.05) p A L L B d 3 1 1 L 1.6 Tip Shape Select from the diagram on the right. E D h7 D h7 A 3.2 3.2 G 6.3 1.6 1.6 3.2 Tip Shape Selectable Shape A Shape B EThe center hole remains. e=P/2/tan(A/2)+R-{R/sin(A/2)} A° E B A° e R B EThe center hole remains. EP-2Etan(A/2)≥0.73 EP-2Etan(A/2)≥2 (Dicoat ® ) EOnly the Shape B Dicoat ® Treated items do not come with a center hole. Tip Shape Selectable Shape A Shape B EThe center hole remains. e=P/2/tan(A/2)+R-{R/sin(A/2)} A° E B A° e R B EThe center hole remains. EP-2Etan(A/2)≥0.73 EP-2Etan(A/2)≥2 (Dicoat®) G 6.3 1.6 1.6 3.2 E Dicoat ® Treated items will have the ( ) precision and Thread Shape will be E1. Reference: sin15°≈0.259 sin30°=0.5 sin45°≈0.707 sin60°≈0.866 tan15°≈0.267 tan30°=0.577 tan45°=1 tan60°≈1.732 60° W 0 -0.05 P 0 -0.05 P P-1 0 -0.1 (Round) (Diamond) Ø0.03 (Ø0.05) P A 1 L L B 3 1.6 G Tip Shape E D h7 A M (Coarse)=D 3.2 3.2 Select from the diagram on the right. E1 Dicoat ® Treated • TiCN Thread Shape 1 L L B 3 3.2 Dh7 A M (Coarse)=D 3.2 EOnly the Shape B Dicoat ® Treated items do not come with a center hole. E1 QSet Screw QThreaded QSet Screw Alterations Wear Groove Alterations Flat Position Flat Machining Thread Dia. Thread Length Code MK KC KD MC FC Spec. Drill 4 grooves at B Dimension. The wear and tear of the grooves indicate the degree of wears. E Applicable to Hardening, Carburized and Round Shape Products only E Applicable when B ≥ 4 Groove Depth: 0.2mm (±0.05mm) Groove Shape: V Groove (90°) Ordering Code KC Changes the flat position to 90° from the standard position 0°. EApplicable to Diamond Shape Type only. Ordering Code KD Machining on one side. EApplicable to Round Shape Type only. Ordering Code MC8 Changes the thread diameter. ED/3≤M<D Mmin3 EApplicable to Threaded only. Ordering Code FC15 Changes the thread length. FC=1mm Increment D6~10 : M≤FC≤Mx3 D12, 16: M≤FC≤Mx2.5 D20 : M≤FC≤Mx2 EApplicable to Threaded only. XNot applicable to Dicoat ® and TiCN treatment. Part Number - P - B - L - (KC, KD •••etc.) Type D ELNNA 6 - P8.0 - B14 - L5 - KD 0° 3 P-1 0 -0.1 MC FC Part Number - P - B - L - A - E - (KC, KD •••etc.) Type Tip Shape D SELNTA A 6 - P8.0 - B14 - A30 - E2 - KD Alterations Wear Groove Alterations Flat Position Flat Machining Thread Dia. Thread Length Code MK KC KD MC FC Spec. Drill 4 grooves at B Dimension. The wear and tear of the grooves indicate the degree of wears. E Applicable to Hardening, Carburized and Round Shape Products only E Applicable when B ≥ 4 Groove Depth: 0.2mm (±0.05mm) Groove Shape: V Groove (90°) Ordering Code KC Changes the flat position to 90° from the standard position 0°. EApplicable to Diamond Shape Type only. Ordering Code KD Machining on one side. EApplicable to Round Shape Type only. Ordering Code MC8 Changes the thread diameter. ED/3≤M<D Mmin3 EApplicable to Threaded only. Ordering Code FC15 Changes the thread length. FC=1mm Increment D6~10 : M≤FC≤Mx3 D12, 16: M≤FC≤Mx2.5 D20 : M≤FC≤Mx2 EApplicable to Threaded only. XNot applicable to Dicoat ® and TiCN treatment. MC FC 0° 3 P-1 0 -0.1
Transcript of Locating Pins for Fixtures - my.misumi-ec.com
-16911 -16921
Locating Pins for FixturesStandard Grade, No Shoulder
Locating Pins for FixturesTip Shape Selectable, Standard Grade, No Shoulder
QFeatures: For Standard Grade, P Dim. Tolerance is 0
-0.05 (for Precision Grade, 0
-0.01 or 0
-0.02), concentricity is 0.03 or 0.05 (for Precision Grade, 0.01 or 0.02). QFeatures: For Standard Grade, P Dim. Tolerance is 0
-0.05 (for Precision Grade, 0
-0.01 or 0
-0.02), concentricity is 0.03 or 0.05 (for Precision Grade, 0.01 or 0.02).
QThreadedType MMaterial HHardness SSurface TreatmentR-LNNA Round
SCM435 35~40HRC (Surface 750HV ~ ) Hard Chrome PlatingR-LNND Diamond
D-LNNA RoundSKD11 Equivalent 55HRC ~
(Surface 3000HV) Dicoat® TreatedD-LNND DiamondH-LNNA Round
SKD11 Equivalent 55HRC ~ (Surface 3000HV) TiCN TreatmentH-LNND Diamond
Type MMaterial HHardnessELNNA Round
SCM435 Hardening 35~40HRCELNND Diamond
TELNNA RoundSCM415
Carburized 55HRC~ (depth 0.7 ~ 0.8) / Anti-carburizing on ThreadsTELNND Diamond
Type MMaterial HHardnessSELNNA# Round
SCM435 Hardening 35~40HRCSELNND# Diamond
TSELNNA# RoundSCM415
Carburized 55HRC~ (depth 0.7 ~ 0.8) / Anti-carburizing on ThreadsTSELNND# Diamond
Type MMaterial HHardness SSurface TreatmentD-SLNNA# Round
SKD11 Equivalent 55HRC ~ (Surface 3000HV) Dicoat® TreatedD-SLNND# Diamond
Reference: sin15°≈0.259 tan15°≈0.267
E�Dicoat® Treated / TiCN Treated items will have the ( ) precision and Thread Shape will be E1.
E e=P/2/tan15°+R-(R/sin15°)EDicoat® Treated / TiCN Treated items do not come with a center hole. 1 LL eB
3
3.2
Dh7
AM (Coarse)=D
30°
R
1L
30°
BL3
Dh7
R
1.6
G
e
M (Coarse)=D A3.2
60°
P0 -0
.05
0 -0.0
5P
0 -0.1P-1
W
(Round) (Diamond)
Ø0.05P A
0 -0.0
5
0 -0.0
5
0 -0.1P-1
P P
W
60° (Round) (Diamond)
3.2 3.2
Ø0.03(Ø0.05)P A
E1 Dicoat® Treated / TiCN Thread Shape G6.3 1.61.63.2
1 LL eB3
3.2
Dh7
AM (Coarse)=D
30°
R
1L
30°
BL3
Dh7
R
1.6
G
e
M (Coarse)=D A3.2
60°
P0 -0
.05
0 -0.0
5P
0 -0.1P-1
W
(Round) (Diamond)
Ø0.05P A
0 -0.0
5
0 -0.0
5
0 -0.1P-1
P P
W
60° (Round) (Diamond)
3.2 3.2
Ø0.03(Ø0.05)P A
1 LL eB3
3.2D
h7AM (Coarse)=D
30°
R
1L
30°
BL3
Dh7
R
1.6
G
e
M (Coarse)=D A3.2
60°
P0 -0.0
5
0 -0.0
5P
0 -0.1P-1
W
(Round) (Diamond)
Ø0.05P A
0 -0.0
5
0 -0.0
5
0 -0.1P-1
P P
W
60° (Round) (Diamond)
3.2 3.2
Ø0.03(Ø0.05)P A
E1
Ø0.05P A 60°
0
-0
.05
0
-0
.05
P-1 0 -0.1
P P
W
(Round) (Diamond)
BL
D d D
3 R1 1L
h7 h7 30°
1.6
G
eL
A3.2
P-1 0 -0.1
60°
0
-0
.05
P
W
(Diamond)P
0
-0
.05
(Round)
BL
D d
D
3 R1 1L
h7 h71.
6
eL
A
30°
3.23.2 3.2
Ø0.03(Ø0.05)P A Ø0.05P A 60°
0
-0
.05
0
-0
.05
P-1 0 -0.1
P P
W
(Round) (Diamond)
BL
D d D
3 R1 1L
h7 h7 30°
1.6
G
eL
A3.2
P-1 0 -0.1
60°
0
-0
.05
P
W
(Diamond)
P0
-0.0
5
(Round)
BL
D d
D
3 R1 1L
h7 h71.
6
eL
A30
° 3.2
3.2 3.2
Ø0.03(Ø0.05)P A
Ee=P/2/tan15°+R-(R/sin15°)EDicoat® Treated / TiCN Treated items do not come with a center hole.
G6.3 1.61.63.2
E�Dicoat® Treated / TiCN Treated items will have the ( ) precision.
Reference: sin15°≈0.259 tan15°≈0.267
Type MMaterial HHardnessELNTA Round
SCM435 Hardening 35~40HRCELNTD Diamond
TELNTA RoundSCM415
Carburized 55HRC~ (depth 0.7 ~ 0.8) / Anti-carburizing on ThreadsTELNTD Diamond
Type MMaterial HHardness SSurface TreatmentR-LNTA Round
SCM435 35~40HRC(Surface 750HV ~ ) Hard Chrome PlatingR-LNTD Diamond
D-LNTA RoundSKD11 Equivalent 55HRC~
(Surface 3000HV) Dicoat® TreatedD-LNTD DiamondH-LNTA Round
SKD11 Equivalent 55HRC~(Surface 3000HV) TiCN TreatmentH-LNTD Diamond
Part Number- P - B - L
Type DELNNA 10 - P12.0 - B10 - L8 (Threaded)ELNTA 6 - P10.0 - B15 (Set Screw)
Part Number- P - B - L - A - E
Type Tip Shape DSELNNA A 16 - P18.0 - B21 - L15 - A60 - E2 (Threaded)SELNTA B 10 - P14.0 - B10 - A60 (Set Screw)
XL dimension in ( ) is not applicable to Diamond Shape, Dicoat® and TiCN treatment.EB Dimension is selectable from 5 mm ~ for Dicoat® Treated / TiCN Treated Products/Diamond Shape.
Part Number PConfigurable
0.1mm Increment
BConfigurable
1mm Increment
LSelection L1 R W
Unit PriceType Dh7 ELNNA ELNND TELNNA TELNND R-LNNA R-LNND D-LNNA D-LNND H-LNNA H-LNND
Hardened(Round)ELNNA
(Diamond)ELNND
Carburized(Round)
TELNNA
(Diamond)TELNND
Hard Chrome(Round)
R-LNNA
(Diamond)R-LNND
Dicoat(Round)
D-LNNA
(Diamond)D-LNND
TiCN(Round)
H-LNNA
(Diamond)H-LNND
6 0-0.012 8.0~12.0
E2~30
5 8 10 6 3 3 - - 8
0-0.015
10.0~16.0 5 8 10 12 15 10 4 3.5 - -10 12.0~20.0 (5) (8) 10 12 15 12 4 410T 12.0~20.0 (5) (8) 10 12 15 15 5 512 0
-0.01814.0~25.0 (8) 10 12 15 18 15 6 6
16 18.0~32.0 (10) 12 15 18 20 18 8 8 - - - - - -20 0
-0.021 22.0~35.0 12 15 18 20 22 8 9 - - - - - -
EB Dimension is selectable from 5 mm ~ for Dicoat® Treated / TiCN Treated Products / Diamond Shape.
Part Number PConfigurable
0.1mm Increment
BConfigurable
1mm IncrementL L1 d R
ApplicableSet
ScrewW
Unit PriceType Dh7 ELNTA ELNTD TELNTA TELNTD R-LNTA R-LNTD D-LNTA D-LNTD H-LNTA H-LNTD
Hardened(Round)
ELNTA
(Diamond)ELNTD
Carburized(Round)
TELNTA
(Diamond)TELNTD
Hard Chrome(Round)
R-LNTA
(Diamond)R-LNTD
Dicoat(Round)
D-LNTA
(Diamond)D-LNTD
TiCN(Round)
H-LNTA
(Diamond)H-LNTD
6 0-0.012 8.0~12.0
E2~30
5 8 4 3 M5 3 - - 8
0-0.015
10.0~16.0 5 8 5 4 M5 3.5 - -10 12.0~20.0 10 8 7 4 M6 410T 12.0~20.0 5 8 7 5 M6 512 0
-0.01814.0~25.0 12 10 9 6 M8 6
16 18.0~32.0 12 10 13 8 M8 8 - - - - - -20 0
-0.021 22.0~35.0 12 10 17 8 M8 9 - - - - - -
XAngle A*30 is not applicable to Tip Shape B. Select from Standard Grade, No Shoulder (P.1691). XL dimension in ( ) is not applicable to Diamond Shape and Dicoat® treatment.EB Dimension is selectable from 5 mm ~ for Dicoat® Treated / Diamond Shape.
Part Number PConfigurable
0.1mm Increment
BConfigurable
1mm Increment
LSelection
ASelection
E1mm Increment L1 R W
Unit PriceType Tip Shape Dh7 SELNNA# SELNND# TSELNNA# TESLNND# D-SNNA# D-SNND#
Hardened(Round)
SELNNA
(Diamond)SELNND
Carburized(Round)
TSELNNA
(Diamond)TSELNND
Dicoat(Round)
D-SLNNA
(Diamond)D-SLNND
A(Tapered)
B(Taper R)
6 0-0.012 8.0~12.0
E2~30
5 8 10*30
60
90
120
1~10
6 3 3 8
0-0.015
10.0~16.0 5 8 10 12 15 10 4 3.510 12.0~20.0 (5) (8) 10 12 15 12 4 410T 12.0~20.0 (5) (8) 10 12 15 15 5 512 0
-0.01814.0~25.0 (8) 10 12 15 18 15 6 6
16 18.0~32.0 (10) 12 15 18 20 18 8 8 - -20 0
-0.021 22.0~35.0 12 15 18 20 22 8 9 - -
XAngle A*30 is not applicable to Tip Shape B. Select from Standard Grade, No Shoulder (P.1691).EB Dimension is selectable from 5 mm ~ for Dicoat® Treated / Diamond Shape.
Part Number PConfigurable
0.1mm Increment
BConfigurable
1mm Increment
ASelection
E1mm Increment L L1 d R
ApplicableSet
ScrewW
Unit PriceType Tip Shape Dh7 SELNTA SELNTD TSELNTA TSELNTD D-SLNTA D-SLNTD
Hardened(Round)
SELNTA
(Diamond)SELNTD
Carburized(Round)
TSELNTA
(Diamond)TSELNTD
Dicoat(Round)
D-SLNTA
(Diamond)D-SLNTD
A(Tapered)
B(Taper R)
6 0-0.012 8.0~12.0
E2~30
*30
60
90
120
1~10
5 8 4 3 M5 3 8
0-0.015
10.0~16.0 5 8 5 4 M5 3.510 12.0~20.0 10 8 7 4 M6 410T 12.0~20.0 5 8 7 5 M6 512 0
-0.01814.0~25.0 12 10 9 6 M8 6
16 18.0~32.0 12 10 13 8 M8 8 - -20 0
-0.021 22.0~35.0 12 10 17 8 M8 9 - -
Type MMaterial HHardness SSurface TreatmentD-SLNTA# Round
SKD11 Equivalent 55HRC ~ (Surface 3000HV) Dicoat® TreatedD-SLNTD# Diamond
Type MMaterial HHardnessSELNTA# Round
SCM435 Hardening 35~40HRCSELNTD# Diamond
TSELNTA# RoundSCM415
Carburized 55HRC~ (depth 0.7 ~ 0.8) / Anti-carburizing on ThreadsTSELNTD# Diamond
Reference: sin15°≈0.259 sin30°=0.5 sin45°≈0.707 sin60°≈0.866 tan15°≈0.267 tan30°=0.577 tan45°=1 tan60°≈1.732
E�Dicoat® Treated items will have the ( ) precision.
L L
0 -0.0
5P
0 -0.0
5P
P-1 0-0.1
0 -0.0
5P
B
d
31 1 L
1.6G
60°
WL L B
d
31 1 L
1.6
(Round) (Diamond) (Round)Tip Shape
Select from the diagram on the right.
Tip ShapeSelect from the diagram
on the right.
E E
Dh7 Dh7
D h7
D h7
Ø0.05p AAA 3.2 3.23.2 3.2
Ø0.03(Ø0.05)p A
L L
0 -0.0
5P
0 -0.0
5P
P-1 0-0.1
0 -0.0
5P
B
d
31 1 L
1.6G
60°
WL L B
d
31 1 L
1.6
(Round) (Diamond) (Round)Tip Shape
Select from the diagram on the right.
Tip ShapeSelect from the diagram
on the right.
E E
Dh7 Dh7
D h7
D h7
Ø0.05p AAA 3.2 3.23.2 3.2
Ø0.03(Ø0.05)p A
G6.3 1.61.63.2
Tip Shape Selectable
Sh
ap
e A
Sh
ap
e B
EThe center hole remains. e=P/2/tan(A/2)+R-{R/sin(A/2)}
A°
EB
A°
e RB
EThe center hole remains.EP-2Etan(A/2)≥0.73EP-2Etan(A/2)≥2 (Dicoat®)
EOnly the Shape B Dicoat® Treated items do not come with a center hole.
Tip Shape Selectable
Sh
ap
e A
Sh
ap
e B
EThe center hole remains. e=P/2/tan(A/2)+R-{R/sin(A/2)}
A°
EB
A°
e RB
EThe center hole remains.EP-2Etan(A/2)≥0.73EP-2Etan(A/2)≥2 (Dicoat®)
G6.3 1.61.63.2E�Dicoat® Treated items will have the ( ) precision and Thread
Shape will be E1.
Reference: sin15°≈0.259 sin30°=0.5 sin45°≈0.707 sin60°≈0.866 tan15°≈0.267 tan30°=0.577 tan45°=1 tan60°≈1.732
1 LL B31.6
G
60°
W
0 -0.0
5P
0 -0.0
5P
P-1 0-0.1
(Round) (Diamond)Tip Shape
E
Dh7
A
1 LL B31.6
Tip Shape
E
Dh7
A60°
W
0 -0.0
5P
0 -0.0
5P
P-1 0-0.1
(Round) (Diamond)
Ø0.05P AM (Coarse)=D M (Coarse)=D3.2 3.23.2 3.2
Ø0.03(Ø0.05)P A
Select from the diagramon the right.
Select from the diagramon the right.
1 LL B31.6
G
60°
W
0 -0.0
5P
0 -0.0
5P
P-1 0-0.1
(Round) (Diamond)Tip Shape
E
Dh7
A
1 LL B31.6
Tip Shape
E
Dh7
A60°
W
0 -0.0
5P
0 -0.0
5P
P-1 0-0.1
(Round) (Diamond)
Ø0.05P AM (Coarse)=D M (Coarse)=D3.2 3.23.2 3.2
Ø0.03(Ø0.05)P A
Select from the diagramon the right.
Select from the diagramon the right.
E1 Dicoat® Treated • TiCN Thread Shape
1 LL eB3
3.2
Dh7
AM (Coarse)=D
30°
R
1L
30°
BL3
Dh7
R
1.6
G
e
M (Coarse)=D A3.2
60°
P0 -0.0
5
0 -0.0
5P
0 -0.1P-1
W
(Round) (Diamond)
Ø0.05P A
0 -0.0
5
0 -0.0
5
0 -0.1P-1
P P
W
60° (Round) (Diamond)
3.2 3.2
Ø0.03(Ø0.05)P A
EOnly the Shape B Dicoat® Treated items do not come with a center hole.
E1
QSet Screw
QThreaded
QSet Screw
Alterations
Wear Groove Alterations Flat Position Flat Machining Thread Dia. Thread Length
Code MK KC KD MC FC
Spec.
Drill 4 grooves at B Dimension. The wear and tear of the grooves indicate the degree of wears.E�Applicable to Hardening, Carburized
and Round Shape Products onlyE�Applicable when B ≥ 4Groove Depth: 0.2mm (±0.05mm)Groove Shape: V Groove (90°)
Ordering Code KCChanges the flat position to 90° from the standard position 0°.EApplicable to Diamond Shape Type only.
Ordering Code KDMachining on one side.EApplicable to Round Shape Type only.
Ordering Code MC8Changes the thread diameter.ED/3≤M<D Mmin3E Applicable to Threaded only.
Ordering Code FC15Changes the thread length.FC=1mm IncrementD6~10 : M≤FC≤Mx3D12, 16: M≤FC≤Mx2.5D20 : M≤FC≤Mx2EApplicable to Threaded only.X Not applicable to Dicoat® and TiCN treatment.
Part Number- P - B - L - (KC, KD •••etc.)
Type DELNNA 6 - P8.0 - B14 - L5 - KD
0°
3
P-1
0
-0.1 MC
FC
Part Number- P - B - L - A - E - (KC, KD •••etc.)
Type Tip Shape DSELNTA A 6 - P8.0 - B14 - A30 - E2 - KD
Alterations
Wear Groove Alterations Flat Position Flat Machining Thread Dia. Thread Length
Code MK KC KD MC FC
Spec.
Drill 4 grooves at B Dimension. The wear and tear of the grooves indicate the degree of wears.E�Applicable to Hardening, Carburized
and Round Shape Products onlyE�Applicable when B ≥ 4Groove Depth: 0.2mm (±0.05mm)Groove Shape: V Groove (90°)
Ordering Code KCChanges the flat position to 90° from the standard position 0°.EApplicable to Diamond Shape Type only.
Ordering Code KDMachining on one side.EApplicable to Round Shape Type only.
Ordering Code MC8Changes the thread diameter.ED/3≤M<D Mmin3E Applicable to Threaded only.
Ordering Code FC15Changes the thread length.FC=1mm IncrementD6~10 : M≤FC≤Mx3D12, 16: M≤FC≤Mx2.5D20 : M≤FC≤Mx2EApplicable to Threaded only.X Not applicable to Dicoat® and TiCN treatment.
MC
FC
0°
3
P-1
0
-0.1
