LocalGrid PQA - Power Quality Analyzer and Data Concentrator

15
LocalGrid PQA © 2015 LocalGrid Technologies Inc.– All Rights Reserved

Transcript of LocalGrid PQA - Power Quality Analyzer and Data Concentrator

Page 1: LocalGrid PQA - Power Quality Analyzer and Data Concentrator

LocalGrid PQA™

© 2015 LocalGrid Technologies Inc.– All Rights Reserved

Page 2: LocalGrid PQA - Power Quality Analyzer and Data Concentrator

Power Quality Analyzer

PQA stands for Power Quality Analyzer

The LocalGrid PQA is a software product, that runs on the National Instruments Grid Automation Controller

Measure power quality and energy features to IEC, EN, and IEEE standards

Harmonics (IEC 61000-4-7) and Flicker (IEC 61000-4-15)

Phasor measurement unit (C37.118)

Sag/swell/interruption with standard or custom levels (IEC 61000-4-30)

Rapid voltage change with standard or custom levels (IEC 61000-4-30)

Data and events can be visualized, logged, and mappedinto SCADA through a configuration tool

© 2015 LocalGrid Technologies Inc.– All Rights Reserved

Page 3: LocalGrid PQA - Power Quality Analyzer and Data Concentrator

Dual sourced, four-phase voltage and current inputs plus neutral

Time synchronization via GPS, NTP, or IEEE 1588 PTP

Power quality metrics including RMS, power, energy, unbalance, flicker, power factor, and THD up to the 40th harmonic

Detection and logging of power quality events including sags, swells, interruptions, and rapid voltage changes

Inbound multi-protocol translation Modbus, DNP3, IEC 61850, Others..

Interface to SCADA

Local Data Logging Local circular embedded database

Waveform capture

Threshold event detection

Waveform streaming

Windows based data visualization and configuration tool provided

PQA Features

LocalGrid PQA

DNP3

Voltage

Current

Modbus

SCA

DA

© 2015 LocalGrid Technologies Inc.– All Rights Reserved

Loggin

g

Page 4: LocalGrid PQA - Power Quality Analyzer and Data Concentrator

PQA Use Case 1

Distributed Generation Site

PQA

Cellular Router

Typical configuration at a remote asset. Data is logged locally and also published into SCADA over cellular or wired connections – data is buffered locally in case of interruptions

Inverter

Distributed Generation Site

PQA

Cellular Router

Inverter

© 2015 LocalGrid Technologies Inc.– All Rights Reserved

SCADA

Page 5: LocalGrid PQA - Power Quality Analyzer and Data Concentrator

PQA Use Case 2

Distributed Generation Site

PQA

Cellular Router

Typical configuration at a remote asset. Data is logged locally and retrieved on demand from a LocalGrid PQA Client application running on a laptop or PC

Inverter

Distributed Generation Site

PQA

Cellular Router

Inverter

© 2015 LocalGrid Technologies Inc.– All Rights Reserved

PQA Client

Page 6: LocalGrid PQA - Power Quality Analyzer and Data Concentrator

Analog Inputs

8 voltage, 8 current inputs

24-bit

512 samples per cycle

0-250Vrms nominal, 500V peak

0-20Arms continuous, 100Arms 10 seconds

Time Synchronization

GPS - within +-100ns

NTP

IEEE 1588 PTP

Communications Protocols

Modbus Master/Slave

DNP3 Master/Outstation

DDS

PQA Specifications

Event Logging

Direct capture of 512/sample per cycle waveforms per input

200+ waveforms stored locally*

Data Logging

150+ data channels available for logging

Local storage for over 1 month of continuous logging**

Variable logging rates per channel

Client software

Windows XP, Windows 7, Windows 8

Communicates via network port

Automatic discovery of device

* Depends on event duration

** Depends on logging rate

© 2015 LocalGrid Technologies Inc.– All Rights Reserved

Page 7: LocalGrid PQA - Power Quality Analyzer and Data Concentrator

Data Concentrator Features

The Data Concentrator can log data from hundreds of PQA devices simultaneously.

Data is logged into a long term storage database

Data can be stored for years depending on hard drive space

The Data Concentrator can be mapped to SCADA, acting as an intermediary between field deployed devices and SCADA

Security can be managed effectively that way

Data can be retrieved on demand via the LocalGrid PQA Client Application

Data Concentrator is software based and can run on any Windows based PC or Server

© 2015 LocalGrid Technologies Inc.– All Rights Reserved

LocalGrid Data Concentrator

PQ

A

Clien

t

Loggin

g

SCA

DA

Page 8: LocalGrid PQA - Power Quality Analyzer and Data Concentrator

Data Concentrator Use Case 1

Monitoring Sites

PQA

SCADA

Data concentrator logs data from hundreds of PQA’s and can forward on data to SCADA in real-time over wireless, cellular, or wired communication.

© 2015 LocalGrid Technologies Inc.– All Rights Reserved

PQA

PQA

PQA

PQA

PQA

Data Concentrator

Page 9: LocalGrid PQA - Power Quality Analyzer and Data Concentrator

Data Concentrator Use Case 2

Monitoring Sites

PQA

SCADA

Data concentrator logs data from hundreds of PQA’s and can forward on data to SCADA in real-time over wireless, cellular, or wired communication. Data can also be retrieved on demand from a LocalGrid PQA Client.

© 2015 LocalGrid Technologies Inc.– All Rights Reserved

PQA

PQA

PQA

PQA

PQA

Data Concentrator

PQA Client

Page 10: LocalGrid PQA - Power Quality Analyzer and Data Concentrator

Time Synchronization

NTP

IEEE 1588 PTP

Communications Protocols to SCADA

Modbus Master/Slave

DNP3 Master/Outstation

DDS

Suggested Computer Specifications

Windows 7, Windows 8

Intel Core i7, 2.5GHz dual-core

500GB hard disk space

4GB of RAM

Data Concentrator Specifications

Data Logging

Local storage for over 1 year of continuous logging*

Log data from 1000+ PQA devices

Variable logging rates per channel

Circular database – no maintenance required

Network Performance

Bandwidth per PQA of 5KB/second**

1000+ devices to saturate a 100MBit/second link***

Client software

Windows XP, Windows 7, Windows 8

Communicates via network port

Automatic discovery of device

* Depends on logging rates

** Depends on number of points and logging rate

*** Depends on network infrastructure

© 2015 LocalGrid Technologies Inc.– All Rights Reserved

Page 11: LocalGrid PQA - Power Quality Analyzer and Data Concentrator

Supported Hardware

National Instruments Grid Automation System (link)

Substation Hardened Hardware

Based on Real-Time Linux

© 2015 LocalGrid Technologies Inc.– All Rights Reserved

Page 12: LocalGrid PQA - Power Quality Analyzer and Data Concentrator

PQA Client

Windows software to configure and visualize data from PQA devices

Configure protocol conversion inbound and outbound of device

Configure and visualize events and alarms

Download and visualize historical data

View live streaming data

© 2015 LocalGrid Technologies Inc.– All Rights Reserved

Page 13: LocalGrid PQA - Power Quality Analyzer and Data Concentrator

Extend the Product

Data is made available over DDS protocol for consumption by other services in the network

Build your own applications that consume data from any number of PQAs deployed

LocalGrid offers products that be deployed to your devices to extend the PQA such as:

Virtual RTU on devices

PMU on devices

Digital fault recording on devices

© 2015 LocalGrid Technologies Inc.– All Rights Reserved

Page 14: LocalGrid PQA - Power Quality Analyzer and Data Concentrator

How to Buy

The PQA is licensed under a perpetual device deployment license, meaning every device you deploy it on must have a valid license

Can be bundled with the NI Grid Automation System or sold separately

Volume licensing agreements available

Annual support contracts are available to ensure you always have the latest features and security updates

Contact us for a quote

(e) [email protected]

(p) 416-840-3384

(w) www.localgridtech.com/contact/

© 2015 LocalGrid Technologies Inc.– All Rights Reserved

Page 15: LocalGrid PQA - Power Quality Analyzer and Data Concentrator

Thank youFor more information contactGraham [email protected]

© 2015 LocalGrid Technologies Inc.– All Rights Reserved